[PATCHv3 2/2] dts: mxs: spi: Add SSP3 to the 10049 board

[Maxime Ripard]

Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
 arch/arm/boot/dts/imx28-cfa10049.dts |   22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index e0e4b8c..845663e 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -20,6 +20,28 @@
 	compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
 
 	apb at 80000000 {
+		apbh at 80000000 {
+			pinctrl at 80018000 {
+				spi3_pins_cfa10049: spi3-cfa10049 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x0181 /* MX28_PAD_GPMI_RDN__SSP3_SCK */
+						0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */
+					>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+			};
+
+			ssp3: ssp at 80016000 {
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi3_pins_cfa10049>;
+				status = "okay";
+			};
+		};
+
 		apbx at 80040000 {
 			i2c1: i2c at 8005a000 {
 				pinctrl-names = "default";
-- 
1.7.9.5