[PATCH v2] ARM: initial DTS support for km_kirkwood
Valentin Longchamp
valentin.longchamp at keymile.com
Tue Sep 4 05:55:02 EDT 2012
This is a first attempt to support the km_kirkwood reference design with
a device tree. This km_kirkwood design is present in many Keymile
products. It is based on the Marvell Bobcat SOC which integrates a
Kirkwood CPU next to a big L2 Ethernet Switch. The Kirkwood in the SOC
is very similar to the "normal" one, but there are a few differences.
This initial support is minimal: the kernel can boot with network
(ge0), serial port and NAND functional.
Signed-off-by: Valentin Longchamp <valentin.longchamp at keymile.com>
Cc: Holger Brunck <holger.brunck at keymile.com>
---
arch/arm/boot/dts/kirkwood-km_kirkwood.dts | 29 ++++++++++++++
arch/arm/mach-kirkwood/Kconfig | 7 +++
arch/arm/mach-kirkwood/Makefile | 1 +
arch/arm/mach-kirkwood/Makefile.boot | 1 +
arch/arm/mach-kirkwood/board-dt.c | 4 ++
arch/arm/mach-kirkwood/board-km_kirkwood.c | 57 ++++++++++++++++++++++++++++
arch/arm/mach-kirkwood/common.h | 6 +++
7 files changed, 105 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/kirkwood-km_kirkwood.dts
create mode 100644 arch/arm/mach-kirkwood/board-km_kirkwood.c
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
new file mode 100644
index 0000000..75bdb93
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
@@ -0,0 +1,29 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+ model = "Keymile Kirkwood Reference Design";
+ compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ };
+
+ ocp at f1000000 {
+ serial at 12000 {
+ clock-frequency = <200000000>;
+ status = "ok";
+ };
+
+ nand at 3000000 {
+ status = "ok";
+ chip-delay = <25>;
+ };
+ };
+};
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index ca5c15a..a2a99a1 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -109,6 +109,13 @@ config MACH_LSXL_DT
Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using
Flattened Device Tree.
+config MACH_KM_KIRKWOOD_DT
+ bool "Keymile Kirkwood Reference Design (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the
+ Keymile Kirkwood Reference Desgin, using Flattened Device Tree.
+
config MACH_TS219
bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
help
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 055c85a..f23ed81 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -28,3 +28,4 @@ obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o
obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o
obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o
obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o
+obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
index a571755..4f1dc3c 100644
--- a/arch/arm/mach-kirkwood/Makefile.boot
+++ b/arch/arm/mach-kirkwood/Makefile.boot
@@ -11,3 +11,4 @@ dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb
dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb
+dtb-$(CONFIG_MACH_KM_KIRKWOOD_DT) += kirkwood-km_kirkwood.dtb
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index e4eb450..9decc97 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -87,6 +87,9 @@ static void __init kirkwood_dt_init(void)
if (of_machine_is_compatible("buffalo,lsxl"))
lsxl_init();
+ if (of_machine_is_compatible("keymile,km_kirkwood"))
+ km_kirkwood_init();
+
of_platform_populate(NULL, kirkwood_dt_match_table,
kirkwood_auxdata_lookup, NULL);
}
@@ -100,6 +103,7 @@ static const char *kirkwood_dt_board_compat[] = {
"qnap,ts219",
"seagate,goflexnet",
"buffalo,lsxl",
+ "keymile,km_kirkwood",
NULL
};
diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c
new file mode 100644
index 0000000..f7d3283
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-km_kirkwood.c
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2012 2012 KEYMILE AG, CH-3097 Bern
+ * Valentin Longchamp <valentin.longchamp at keymile.com>
+ *
+ * arch/arm/mach-kirkwood/board-km_kirkwood.c
+ *
+ * Keymile km_kirkwood Reference Desing Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/clk.h>
+#include <linux/clk-private.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static unsigned int km_kirkwood_mpp_config[] __initdata = {
+ MPP8_GPIO, /* I2C SDA */
+ MPP9_GPIO, /* I2C SCL */
+ 0
+};
+
+void __init km_kirkwood_init(void)
+{
+ struct clk *sata_clk;
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_mpp_conf(km_kirkwood_mpp_config);
+
+ /*
+ * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing
+ * SATA bits (14-15) of the Clock Gating Control Register. Since these
+ * devices are also not present in this variant, their clocks get
+ * disabled because unused when clk_disable_unused() gets called.
+ * That's why we change the flags to these clocks to CLK_IGNORE_UNUSED
+ */
+ sata_clk = clk_get_sys("sata_mv.0", "0");
+ if (!IS_ERR(sata_clk))
+ sata_clk->flags |= CLK_IGNORE_UNUSED;
+ sata_clk = clk_get_sys("sata_mv.0", "1");
+ if (!IS_ERR(sata_clk))
+ sata_clk->flags |= CLK_IGNORE_UNUSED;
+
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&km_kirkwood_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 304dd1a..219eecc 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -94,6 +94,12 @@ void lsxl_init(void);
static inline void lsxl_init(void) {};
#endif
+#ifdef CONFIG_MACH_KM_KIRKWOOD_DT
+void km_kirkwood_init(void);
+#else
+static inline void km_kirkwood_init(void) {};
+#endif
+
/* early init functions not converted to fdt yet */
char *kirkwood_id(void);
void kirkwood_l2_init(void);
--
1.7.1
More information about the linux-arm-kernel
mailing list