[GIT PULL] Patches surrounding DT development due for ARM-SoC
Lee Jones
lee.jones at linaro.org
Mon Sep 24 04:15:30 EDT 2012
> In the future, please send pull requests to arm at kernel.org for arm-soc. Or,
> if you prefer individual email addresses instead of the alias, please send
> them to olof at lixom.net and not my gmail address -- chances are I won't see
> them or forget about them, which is what happened here. :-)
I'll try to remember that. Thanks Olof.
> Nicely contained and no merge conflicts makes me happy right now. Pulled
> into ux500/dt and next/dt.
Good news. Thanks again.
> On Thu, Sep 20, 2012 at 4:33 AM, Lee Jones <lee.jones at linaro.org> wrote:
>
> > The following changes since commit
> > 5698bd757d55b1bb87edd1a9744ab09c142abfc2:
> >
> > Linux 3.6-rc6 (2012-09-16 14:58:51 -0700)
> >
> > are available in the git repository at:
> >
> > git://git.linaro.org/people/ljones/linux-3.0-ux500.git for-arm-soc-next
> >
> > for you to fetch changes up to c164fa62b93782165f12c0e8366f7b46507edb4d:
> >
> > ARM: ux500: Fix SSP register address format (2012-09-20 12:32:47 +0200)
> >
> > ----------------------------------------------------------------
> > Lee Jones (39):
> > ASoC: Ux500: Move MSP pinctrl setup into the MSP driver
> > ASoC: Ux500: Enable MOP500 driver for Device Tree
> > ASoC: Ux500: Enable ux500 MSP driver for Device Tree
> > ASoC: codecs: Enable AB8500 CODEC for Device Tree
> > ASoC: Ux500: Minor coding layout changes
> > Documentation: Define the MOP500 Audio Machine Driver Device Tree
> > bindings
> > Documentation: Define the MSP Driver Device Tree bindings
> > ARM: ux500: Rename db8500.dtsi to dbx5x0.dtsi to encompass the
> > u9500, u8540 and u9540
> > ARM: ux500: Clean-up temporary Device Tree enablement helpers
> > ARM: ux500: Pass PMU platform data due for Perf though AUXDATA
> > Documentation: Add the AB8500 CODEC device to the MFD AB8500 doc
> > of/irq: Create stub for of_irq_find_parent when !CONFIG_OF
> > ARM: ux500: Identify the PRCMU as an interrupt controller
> > ARM: ux500: Force AB8500 to use the GIC as its interrupt controller
> > Revert "input: ab8500-ponkey: Create AB8500 domain IRQ mapping"
> > ARM: ux500: Remove unused snowball_of_platform_devs struct
> > ARM: ux500: Match Power-On-Key MFD and DTS compatible strings
> > drivers/rtc/rtc-ab8500.c: Revoke Device Tree enablement
> > ARM: ux500: Add i2c configurations to the Device Tree for DB8500
> > based devices
> > ARM: ux500: Add skeleton Device Tree for the HREF reference board
> > ARM: ux500: Add UART support to the HREF Device Tree
> > ARM: ux500: Pass SDI DMA information though AUX_DATA to MMCI
> > ARM: ux500: Clean-up MSP platform code
> > ARM: ux500: Add AB8500 CODEC node to DB8500 Device Tree
> > ARM: ux500: Fork MSP platform registration for step-by-step DT
> > enablement
> > ARM: ux500: Pass MSP DMA platform data though AUXDATA
> > ARM: ux500: Stop registering the MOP500 Audio driver from platform
> > code
> > ARM: ux500: Remove platform registration of MSP devices
> > ARM: ux500: Rename MSP board file to something more meaningful
> > ARM: ux500: Add nodes for the MSP into Device Tree
> > ARM: ux500: Add all encompassing sound node to the Snowball Device
> > Tree
> > ARM: ux500: Stop registering Audio devices for HREF when DT is
> > enabled
> > ARM: ux500: Stop registering I2C sub-devices for HREF when DT is
> > enabled
> > ARM: ux500: Add all known I2C sub-device nodes to the HREF DT
> > ARM: ux500: Add nodes for the MSP into the HREF Device Tree
> > ARM: ux500: Add all encompassing sound node to the HREF Device Tree
> > ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT
> > ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT
> > ARM: ux500: Fix SSP register address format
> >
> > Documentation/devicetree/bindings/mfd/ab8500.txt | 15 +++
> > .../devicetree/bindings/sound/ux500-mop500.txt | 39 ++++++++
> > .../devicetree/bindings/sound/ux500-msp.txt | 43 +++++++++
> > arch/arm/boot/dts/{db8500.dtsi => dbx5x0.dtsi} | 71 ++++++++++++--
> > arch/arm/boot/dts/hrefv60plus.dts | 95
> > ++++++++++++++++++
> > arch/arm/boot/dts/snowball.dts | 19 +++-
> > arch/arm/mach-ux500/Makefile | 2 +-
> > .../{board-mop500-msp.c => board-mop500-audio.c} | 102
> > +++-----------------
> > arch/arm/mach-ux500/board-mop500-msp.h | 14 ---
> > arch/arm/mach-ux500/board-mop500-sdi.c | 4 +-
> > arch/arm/mach-ux500/board-mop500.c | 39 ++++----
> > arch/arm/mach-ux500/board-mop500.h | 11 +++
> > arch/arm/mach-ux500/cpu-db8500.c | 10 +-
> > arch/arm/mach-ux500/include/mach/msp.h | 2 -
> > drivers/input/misc/ab8500-ponkey.c | 4 +-
> > drivers/rtc/rtc-ab8500.c | 6 --
> > include/linux/mfd/abx500/ab8500-codec.h | 6 +-
> > include/linux/of_irq.h | 5 +
> > sound/soc/codecs/ab8500-codec.c | 81 ++++++++++++++++
> > sound/soc/ux500/mop500.c | 47 ++++++++-
> > sound/soc/ux500/ux500_msp_dai.c | 6 ++
> > sound/soc/ux500/ux500_msp_i2s.c | 89
> > +++++++++++++----
> > sound/soc/ux500/ux500_msp_i2s.h | 8 +-
> > 23 files changed, 538 insertions(+), 180 deletions(-)
> > create mode 100644
> > Documentation/devicetree/bindings/sound/ux500-mop500.txt
> > create mode 100644 Documentation/devicetree/bindings/sound/ux500-msp.txt
> > rename arch/arm/boot/dts/{db8500.dtsi => dbx5x0.dtsi} (88%)
> > create mode 100644 arch/arm/boot/dts/hrefv60plus.dts
> > rename arch/arm/mach-ux500/{board-mop500-msp.c => board-mop500-audio.c}
> > (66%)
> > delete mode 100644 arch/arm/mach-ux500/board-mop500-msp.h
> >
> > --
> > Lee Jones
> > Linaro ST-Ericsson Landing Team Lead
> > Linaro.org │ Open source software for ARM SoCs
> > Follow Linaro: Facebook | Twitter | Blog
> >
--
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
More information about the linux-arm-kernel
mailing list