[GIT PULL] Patches surrounding DT development due for ARM-SoC
Olof Johansson
olof at lixom.net
Sun Sep 23 01:25:20 EDT 2012
Hi Lee,
In the future, please send pull requests to arm at kernel.org for arm-soc. Or,
if you prefer individual email addresses instead of the alias, please send
them to olof at lixom.net and not my gmail address -- chances are I won't see
them or forget about them, which is what happened here. :-)
Nicely contained and no merge conflicts makes me happy right now. Pulled
into ux500/dt and next/dt.
Thanks!
-Olof
On Thu, Sep 20, 2012 at 4:33 AM, Lee Jones <lee.jones at linaro.org> wrote:
> The following changes since commit
> 5698bd757d55b1bb87edd1a9744ab09c142abfc2:
>
> Linux 3.6-rc6 (2012-09-16 14:58:51 -0700)
>
> are available in the git repository at:
>
> git://git.linaro.org/people/ljones/linux-3.0-ux500.git for-arm-soc-next
>
> for you to fetch changes up to c164fa62b93782165f12c0e8366f7b46507edb4d:
>
> ARM: ux500: Fix SSP register address format (2012-09-20 12:32:47 +0200)
>
> ----------------------------------------------------------------
> Lee Jones (39):
> ASoC: Ux500: Move MSP pinctrl setup into the MSP driver
> ASoC: Ux500: Enable MOP500 driver for Device Tree
> ASoC: Ux500: Enable ux500 MSP driver for Device Tree
> ASoC: codecs: Enable AB8500 CODEC for Device Tree
> ASoC: Ux500: Minor coding layout changes
> Documentation: Define the MOP500 Audio Machine Driver Device Tree
> bindings
> Documentation: Define the MSP Driver Device Tree bindings
> ARM: ux500: Rename db8500.dtsi to dbx5x0.dtsi to encompass the
> u9500, u8540 and u9540
> ARM: ux500: Clean-up temporary Device Tree enablement helpers
> ARM: ux500: Pass PMU platform data due for Perf though AUXDATA
> Documentation: Add the AB8500 CODEC device to the MFD AB8500 doc
> of/irq: Create stub for of_irq_find_parent when !CONFIG_OF
> ARM: ux500: Identify the PRCMU as an interrupt controller
> ARM: ux500: Force AB8500 to use the GIC as its interrupt controller
> Revert "input: ab8500-ponkey: Create AB8500 domain IRQ mapping"
> ARM: ux500: Remove unused snowball_of_platform_devs struct
> ARM: ux500: Match Power-On-Key MFD and DTS compatible strings
> drivers/rtc/rtc-ab8500.c: Revoke Device Tree enablement
> ARM: ux500: Add i2c configurations to the Device Tree for DB8500
> based devices
> ARM: ux500: Add skeleton Device Tree for the HREF reference board
> ARM: ux500: Add UART support to the HREF Device Tree
> ARM: ux500: Pass SDI DMA information though AUX_DATA to MMCI
> ARM: ux500: Clean-up MSP platform code
> ARM: ux500: Add AB8500 CODEC node to DB8500 Device Tree
> ARM: ux500: Fork MSP platform registration for step-by-step DT
> enablement
> ARM: ux500: Pass MSP DMA platform data though AUXDATA
> ARM: ux500: Stop registering the MOP500 Audio driver from platform
> code
> ARM: ux500: Remove platform registration of MSP devices
> ARM: ux500: Rename MSP board file to something more meaningful
> ARM: ux500: Add nodes for the MSP into Device Tree
> ARM: ux500: Add all encompassing sound node to the Snowball Device
> Tree
> ARM: ux500: Stop registering Audio devices for HREF when DT is
> enabled
> ARM: ux500: Stop registering I2C sub-devices for HREF when DT is
> enabled
> ARM: ux500: Add all known I2C sub-device nodes to the HREF DT
> ARM: ux500: Add nodes for the MSP into the HREF Device Tree
> ARM: ux500: Add all encompassing sound node to the HREF Device Tree
> ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT
> ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT
> ARM: ux500: Fix SSP register address format
>
> Documentation/devicetree/bindings/mfd/ab8500.txt | 15 +++
> .../devicetree/bindings/sound/ux500-mop500.txt | 39 ++++++++
> .../devicetree/bindings/sound/ux500-msp.txt | 43 +++++++++
> arch/arm/boot/dts/{db8500.dtsi => dbx5x0.dtsi} | 71 ++++++++++++--
> arch/arm/boot/dts/hrefv60plus.dts | 95
> ++++++++++++++++++
> arch/arm/boot/dts/snowball.dts | 19 +++-
> arch/arm/mach-ux500/Makefile | 2 +-
> .../{board-mop500-msp.c => board-mop500-audio.c} | 102
> +++-----------------
> arch/arm/mach-ux500/board-mop500-msp.h | 14 ---
> arch/arm/mach-ux500/board-mop500-sdi.c | 4 +-
> arch/arm/mach-ux500/board-mop500.c | 39 ++++----
> arch/arm/mach-ux500/board-mop500.h | 11 +++
> arch/arm/mach-ux500/cpu-db8500.c | 10 +-
> arch/arm/mach-ux500/include/mach/msp.h | 2 -
> drivers/input/misc/ab8500-ponkey.c | 4 +-
> drivers/rtc/rtc-ab8500.c | 6 --
> include/linux/mfd/abx500/ab8500-codec.h | 6 +-
> include/linux/of_irq.h | 5 +
> sound/soc/codecs/ab8500-codec.c | 81 ++++++++++++++++
> sound/soc/ux500/mop500.c | 47 ++++++++-
> sound/soc/ux500/ux500_msp_dai.c | 6 ++
> sound/soc/ux500/ux500_msp_i2s.c | 89
> +++++++++++++----
> sound/soc/ux500/ux500_msp_i2s.h | 8 +-
> 23 files changed, 538 insertions(+), 180 deletions(-)
> create mode 100644
> Documentation/devicetree/bindings/sound/ux500-mop500.txt
> create mode 100644 Documentation/devicetree/bindings/sound/ux500-msp.txt
> rename arch/arm/boot/dts/{db8500.dtsi => dbx5x0.dtsi} (88%)
> create mode 100644 arch/arm/boot/dts/hrefv60plus.dts
> rename arch/arm/mach-ux500/{board-mop500-msp.c => board-mop500-audio.c}
> (66%)
> delete mode 100644 arch/arm/mach-ux500/board-mop500-msp.h
>
> --
> Lee Jones
> Linaro ST-Ericsson Landing Team Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120922/904e49f6/attachment-0001.html>
More information about the linux-arm-kernel
mailing list