[PATCH v3 15/15] ASoC: omap-pcm: Convert to use dmaengine
Peter Ujfalusi
peter.ujfalusi at ti.com
Fri Sep 14 08:05:58 EDT 2012
Original author: Russell King <rmk+kernel at arm.linux.org.uk>
Switch the omap-pcm to use dmaengine.
Certain features are not supported by after dmaengine conversion:
1. No period wakeup mode
DMA engine has no way to communicate this information through
standard channels.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
CC: Russell King <rmk+kernel at arm.linux.org.uk>
---
sound/soc/omap/Kconfig | 3 +-
sound/soc/omap/omap-pcm.c | 269 ++++++++++------------------------------------
2 files changed, 61 insertions(+), 211 deletions(-)
diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
index 2c484a5..7048137 100644
--- a/sound/soc/omap/Kconfig
+++ b/sound/soc/omap/Kconfig
@@ -1,6 +1,7 @@
config SND_OMAP_SOC
tristate "SoC Audio for the Texas Instruments OMAP chips"
- depends on ARCH_OMAP
+ depends on ARCH_OMAP && DMA_OMAP
+ select SND_SOC_DMAENGINE_PCM
config SND_OMAP_SOC_DMIC
tristate
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index 74da4b7..a2636f6 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -25,12 +25,13 @@
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/module.h>
+#include <linux/omap-dma.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
+#include <sound/dmaengine_pcm.h>
#include <sound/soc.h>
-#include <plat/dma.h>
#include "omap-pcm.h"
static const struct snd_pcm_hardware omap_pcm_hardware = {
@@ -49,61 +50,34 @@ static const struct snd_pcm_hardware omap_pcm_hardware = {
.buffer_bytes_max = 128 * 1024,
};
-struct omap_runtime_data {
- spinlock_t lock;
- struct omap_pcm_dma_data *dma_data;
- int dma_ch;
- int period_index;
-};
-
-static void omap_pcm_dma_irq(int ch, u16 stat, void *data)
+static int omap_pcm_get_dma_buswidth(int num_bits)
{
- struct snd_pcm_substream *substream = data;
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct omap_runtime_data *prtd = runtime->private_data;
- unsigned long flags;
-
- if ((cpu_is_omap1510())) {
- /*
- * OMAP1510 doesn't fully support DMA progress counter
- * and there is no software emulation implemented yet,
- * so have to maintain our own progress counters
- * that can be used by omap_pcm_pointer() instead.
- */
- spin_lock_irqsave(&prtd->lock, flags);
- if ((stat == OMAP_DMA_LAST_IRQ) &&
- (prtd->period_index == runtime->periods - 1)) {
- /* we are in sync, do nothing */
- spin_unlock_irqrestore(&prtd->lock, flags);
- return;
- }
- if (prtd->period_index >= 0) {
- if (stat & OMAP_DMA_BLOCK_IRQ) {
- /* end of buffer reached, loop back */
- prtd->period_index = 0;
- } else if (stat & OMAP_DMA_LAST_IRQ) {
- /* update the counter for the last period */
- prtd->period_index = runtime->periods - 1;
- } else if (++prtd->period_index >= runtime->periods) {
- /* end of buffer missed? loop back */
- prtd->period_index = 0;
- }
- }
- spin_unlock_irqrestore(&prtd->lock, flags);
- }
+ int buswidth;
- snd_pcm_period_elapsed(substream);
+ switch (num_bits) {
+ case 16:
+ buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
+ break;
+ case 32:
+ buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ break;
+ default:
+ buswidth = -EINVAL;
+ break;
+ }
+ return buswidth;
}
+
/* this may get called several times by oss emulation */
static int omap_pcm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct omap_runtime_data *prtd = runtime->private_data;
struct omap_pcm_dma_data *dma_data;
-
+ struct dma_slave_config config;
+ struct dma_chan *chan;
int err = 0;
dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
@@ -116,195 +90,78 @@ static int omap_pcm_hw_params(struct snd_pcm_substream *substream,
snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
runtime->dma_bytes = params_buffer_bytes(params);
- if (prtd->dma_data)
- return 0;
- prtd->dma_data = dma_data;
- err = omap_request_dma(dma_data->dma_req, dma_data->name,
- omap_pcm_dma_irq, substream, &prtd->dma_ch);
- if (!err) {
- /*
- * Link channel with itself so DMA doesn't need any
- * reprogramming while looping the buffer
- */
- omap_dma_link_lch(prtd->dma_ch, prtd->dma_ch);
- }
-
- return err;
-}
-
-static int omap_pcm_hw_free(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct omap_runtime_data *prtd = runtime->private_data;
-
- if (prtd->dma_data == NULL)
- return 0;
+ chan = snd_dmaengine_pcm_get_chan(substream);
+ if (!chan)
+ return -EINVAL;
- omap_dma_unlink_lch(prtd->dma_ch, prtd->dma_ch);
- omap_free_dma(prtd->dma_ch);
- prtd->dma_data = NULL;
+ /* fills in addr_width and direction */
+ err = snd_hwparams_to_dma_slave_config(substream, params, &config);
+ if (err)
+ return err;
- snd_pcm_set_runtime_buffer(substream, NULL);
+ /* Override the *_dma addr_width if requested by the DAI driver */
+ if (dma_data->data_type) {
+ int buswidth = omap_pcm_get_dma_buswidth(dma_data->data_type);
- return 0;
-}
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ config.dst_addr_width = buswidth;
+ else
+ config.src_addr_width = buswidth;
+ }
-static int omap_pcm_get_dma_type(int num_bits)
-{
- int data_type;
+ config.src_addr = dma_data->port_addr;
+ config.dst_addr = dma_data->port_addr;
+ config.src_maxburst = dma_data->packet_size;
+ config.dst_maxburst = dma_data->packet_size;
- switch (num_bits) {
- case 16:
- data_type = OMAP_DMA_DATA_TYPE_S16;
- break;
- case 32:
- data_type = OMAP_DMA_DATA_TYPE_S32;
- break;
- default:
- data_type = -EINVAL;
- break;
- }
- return data_type;
+ return dmaengine_slave_config(chan, &config);
}
-static int omap_pcm_prepare(struct snd_pcm_substream *substream)
+static int omap_pcm_hw_free(struct snd_pcm_substream *substream)
{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct omap_runtime_data *prtd = runtime->private_data;
- struct omap_pcm_dma_data *dma_data = prtd->dma_data;
- struct omap_dma_channel_params dma_params;
- int bytes;
-
- /* return if this is a bufferless transfer e.g.
- * codec <--> BT codec or GSM modem -- lg FIXME */
- if (!prtd->dma_data)
- return 0;
-
- memset(&dma_params, 0, sizeof(dma_params));
-
- if (dma_data->data_type)
- dma_params.data_type = omap_pcm_get_dma_type(
- dma_data->data_type);
- else
- dma_params.data_type = omap_pcm_get_dma_type(
- snd_pcm_format_physical_width(runtime->format));
-
- if (dma_params.data_type < 0)
- return dma_params.data_type;
-
- dma_params.trigger = dma_data->dma_req;
-
- if (dma_data->packet_size)
- dma_params.sync_mode = OMAP_DMA_SYNC_PACKET;
- else
- dma_params.sync_mode = OMAP_DMA_SYNC_ELEMENT;
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- dma_params.src_amode = OMAP_DMA_AMODE_POST_INC;
- dma_params.dst_amode = OMAP_DMA_AMODE_CONSTANT;
- dma_params.src_or_dst_synch = OMAP_DMA_DST_SYNC;
- dma_params.src_start = runtime->dma_addr;
- dma_params.dst_start = dma_data->port_addr;
- dma_params.dst_port = OMAP_DMA_PORT_MPUI;
- dma_params.dst_fi = dma_data->packet_size;
- } else {
- dma_params.src_amode = OMAP_DMA_AMODE_CONSTANT;
- dma_params.dst_amode = OMAP_DMA_AMODE_POST_INC;
- dma_params.src_or_dst_synch = OMAP_DMA_SRC_SYNC;
- dma_params.src_start = dma_data->port_addr;
- dma_params.dst_start = runtime->dma_addr;
- dma_params.src_port = OMAP_DMA_PORT_MPUI;
- dma_params.src_fi = dma_data->packet_size;
- }
- /*
- * Set DMA transfer frame size equal to ALSA period size and frame
- * count as no. of ALSA periods. Then with DMA frame interrupt enabled,
- * we can transfer the whole ALSA buffer with single DMA transfer but
- * still can get an interrupt at each period bounary
- */
- bytes = snd_pcm_lib_period_bytes(substream);
- dma_params.elem_count = bytes >> dma_params.data_type;
- dma_params.frame_count = runtime->periods;
- omap_set_dma_params(prtd->dma_ch, &dma_params);
-
- if ((cpu_is_omap1510()))
- omap_enable_dma_irq(prtd->dma_ch, OMAP_DMA_FRAME_IRQ |
- OMAP_DMA_LAST_IRQ | OMAP_DMA_BLOCK_IRQ);
- else if (!substream->runtime->no_period_wakeup)
- omap_enable_dma_irq(prtd->dma_ch, OMAP_DMA_FRAME_IRQ);
- else {
- /*
- * No period wakeup:
- * we need to disable BLOCK_IRQ, which is enabled by the omap
- * dma core at request dma time.
- */
- omap_disable_dma_irq(prtd->dma_ch, OMAP_DMA_BLOCK_IRQ);
- }
-
- if (!(cpu_class_is_omap1())) {
- omap_set_dma_src_burst_mode(prtd->dma_ch,
- OMAP_DMA_DATA_BURST_16);
- omap_set_dma_dest_burst_mode(prtd->dma_ch,
- OMAP_DMA_DATA_BURST_16);
- }
-
+ snd_pcm_set_runtime_buffer(substream, NULL);
return 0;
}
static int omap_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct omap_runtime_data *prtd = runtime->private_data;
- struct omap_pcm_dma_data *dma_data = prtd->dma_data;
- unsigned long flags;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct omap_pcm_dma_data *dma_data;
int ret = 0;
- spin_lock_irqsave(&prtd->lock, flags);
+ dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- prtd->period_index = 0;
/* Configure McBSP internal buffer usage */
if (dma_data->set_threshold)
dma_data->set_threshold(substream);
-
- omap_start_dma(prtd->dma_ch);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- prtd->period_index = -1;
- omap_stop_dma(prtd->dma_ch);
break;
default:
ret = -EINVAL;
}
- spin_unlock_irqrestore(&prtd->lock, flags);
+
+ if (ret == 0)
+ ret = snd_dmaengine_pcm_trigger(substream, cmd);
return ret;
}
static snd_pcm_uframes_t omap_pcm_pointer(struct snd_pcm_substream *substream)
{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct omap_runtime_data *prtd = runtime->private_data;
- dma_addr_t ptr;
snd_pcm_uframes_t offset;
- if (cpu_is_omap1510()) {
- offset = prtd->period_index * runtime->period_size;
- } else if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
- ptr = omap_get_dma_dst_pos(prtd->dma_ch);
- offset = bytes_to_frames(runtime, ptr - runtime->dma_addr);
- } else {
- ptr = omap_get_dma_src_pos(prtd->dma_ch);
- offset = bytes_to_frames(runtime, ptr - runtime->dma_addr);
- }
-
- if (offset >= runtime->buffer_size)
- offset = 0;
+ if (cpu_is_omap1510())
+ offset = snd_dmaengine_pcm_pointer_no_residue(substream);
+ else
+ offset = snd_dmaengine_pcm_pointer(substream);
return offset;
}
@@ -312,7 +169,8 @@ static snd_pcm_uframes_t omap_pcm_pointer(struct snd_pcm_substream *substream)
static int omap_pcm_open(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
- struct omap_runtime_data *prtd;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct omap_pcm_dma_data *dma_data;
int ret;
snd_soc_set_runtime_hwparams(substream, &omap_pcm_hardware);
@@ -321,25 +179,17 @@ static int omap_pcm_open(struct snd_pcm_substream *substream)
ret = snd_pcm_hw_constraint_integer(runtime,
SNDRV_PCM_HW_PARAM_PERIODS);
if (ret < 0)
- goto out;
-
- prtd = kzalloc(sizeof(*prtd), GFP_KERNEL);
- if (prtd == NULL) {
- ret = -ENOMEM;
- goto out;
- }
- spin_lock_init(&prtd->lock);
- runtime->private_data = prtd;
+ return ret;
-out:
+ dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+ ret = snd_dmaengine_pcm_open(substream, omap_dma_filter_fn,
+ &dma_data->dma_req);
return ret;
}
static int omap_pcm_close(struct snd_pcm_substream *substream)
{
- struct snd_pcm_runtime *runtime = substream->runtime;
-
- kfree(runtime->private_data);
+ snd_dmaengine_pcm_close(substream);
return 0;
}
@@ -360,7 +210,6 @@ static struct snd_pcm_ops omap_pcm_ops = {
.ioctl = snd_pcm_lib_ioctl,
.hw_params = omap_pcm_hw_params,
.hw_free = omap_pcm_hw_free,
- .prepare = omap_pcm_prepare,
.trigger = omap_pcm_trigger,
.pointer = omap_pcm_pointer,
.mmap = omap_pcm_mmap,
--
1.7.12
More information about the linux-arm-kernel
mailing list