[PATCH v2 3/3] arm/dts: omap: Add usb_otg and glue data

[Benoit Cousson]

On 09/11/2012 08:36 AM, Kishon Vijay Abraham I wrote:
> Add usb otg data node in omap4/omap3 device tree file. Also update
> the node with board specific setting in omapx-<board>.dts file.
> Acked-by: Felipe Balbi <balbi at ti.com>
> Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
> ---
>  arch/arm/boot/dts/omap3-beagle.dts |    6 ++++++
>  arch/arm/boot/dts/omap3-evm.dts    |    6 ++++++
>  arch/arm/boot/dts/omap3.dtsi       |    8 ++++++++
>  arch/arm/boot/dts/omap4-panda.dts  |    6 ++++++
>  arch/arm/boot/dts/omap4-sdp.dts    |    6 ++++++
>  arch/arm/boot/dts/omap4.dtsi       |    8 ++++++++
>  6 files changed, 40 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
> index cdcb98c..6d6a7a4 100644
> --- a/arch/arm/boot/dts/omap3-beagle.dts
> +++ b/arch/arm/boot/dts/omap3-beagle.dts
> @@ -67,3 +67,9 @@
>  &mmc3 {
>  	status = "disabled";
>  };
> +
> +&usb_otg_hs {
> +	interface_type = <0>;
> +	mode = <3>;
> +	power = <50>;
> +};
> diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
> index f349ee9..c4ac75e 100644
> --- a/arch/arm/boot/dts/omap3-evm.dts
> +++ b/arch/arm/boot/dts/omap3-evm.dts
> @@ -46,3 +46,9 @@
>  		reg = <0x5c>;
>  	};
>  };
> +
> +&usb_otg_hs {
> +	interface_type = <0>;
> +	mode = <3>;
> +	power = <50>;
> +};
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> index 8109471..2501416 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -220,5 +220,13 @@
>  			compatible = "ti,omap3-wdt";
>  			ti,hwmods = "wd_timer2";
>  		};
> +
> +		usb_otg_hs: usb_otg_hs {
> +			compatible = "ti,omap3-musb";
> +			ti,hwmods = "usb_otg_hs";
> +			multipoint = <1>;
> +			num_eps = <16>;
> +			ram_bits = <12>;
> +		};
>  	};
>  };
> diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
> index 2999eba..8cded95 100644
> --- a/arch/arm/boot/dts/omap4-panda.dts
> +++ b/arch/arm/boot/dts/omap4-panda.dts
> @@ -130,3 +130,9 @@
>  &twlusb {
>  	usb-supply = <&vusb>;
>  };
> +
> +&usb_otg_hs {
> +	interface_type = <1>;
> +	mode = <3>;
> +	power = <50>;
> +};
> diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
> index d8290c0..24f4bfd 100644
> --- a/arch/arm/boot/dts/omap4-sdp.dts
> +++ b/arch/arm/boot/dts/omap4-sdp.dts
> @@ -230,3 +230,9 @@
>  &twlusb {
>  	usb-supply = <&vusb>;
>  };
> +
> +&usb_otg_hs {
> +	interface_type = <1>;
> +	mode = <3>;
> +	power = <50>;
> +};
> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> index 04cbbcb..5db3d6a 100644
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -295,5 +295,13 @@
>  			interrupt-parent = <&gic>;
>  			ti,hwmods = "dmic";
>  		};
> +
> +		usb_otg_hs: usb_otg_hs {

After rebasing your series on top of devel-dt, you should as well add
the missing reg/irq entries that are now supported thanks to Vaibhav.

Regards,
Benoit

> +			compatible = "ti,omap4-musb";
> +			ti,hwmods = "usb_otg_hs";
> +			multipoint = <1>;
> +			num_eps = <16>;
> +			ram_bits = <12>;
> +		};
>  	};
>  };
>