[PATCH v2 1/3] arm/dts: Add twl6030-usb data

[Benoit Cousson]

On 09/11/2012 11:39 AM, ABRAHAM, KISHON VIJAY wrote:
> Hi,
> 
> On Tue, Sep 11, 2012 at 2:56 PM, Benoit Cousson <b-cousson at ti.com> wrote:
>> On 09/11/2012 08:36 AM, Kishon Vijay Abraham I wrote:
>>> Add twl6030-usb data node in twl6030 device tree file
>>>
>>> Acked-by: Felipe Balbi <balbi at ti.com>
>>> Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
>>> ---
>>>  arch/arm/boot/dts/omap4-panda.dts |    4 ++++
>>>  arch/arm/boot/dts/omap4-sdp.dts   |    4 ++++
>>>  arch/arm/boot/dts/twl6030.dtsi    |    5 +++++
>>>  3 files changed, 13 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
>>> index 9880c12..2999eba 100644
>>> --- a/arch/arm/boot/dts/omap4-panda.dts
>>> +++ b/arch/arm/boot/dts/omap4-panda.dts
>>> @@ -126,3 +126,7 @@
>>>       ti,non-removable;
>>>       bus-width = <4>;
>>>  };
>>> +
>>> +&twlusb {
>>> +     usb-supply = <&vusb>;
>>> +};
>>> diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
>>> index 72216e9..d8290c0 100644
>>> --- a/arch/arm/boot/dts/omap4-sdp.dts
>>> +++ b/arch/arm/boot/dts/omap4-sdp.dts
>>> @@ -226,3 +226,7 @@
>>>       bus-width = <4>;
>>>       ti,non-removable;
>>>  };
>>> +
>>> +&twlusb {
>>> +     usb-supply = <&vusb>;
>>> +};
>>> diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
>>> index 3b2f351..8e3aac9 100644
>>> --- a/arch/arm/boot/dts/twl6030.dtsi
>>> +++ b/arch/arm/boot/dts/twl6030.dtsi
>>> @@ -83,4 +83,9 @@
>>>       clk32kg: regulator at 12 {
>>>               compatible = "ti,twl6030-clk32kg";
>>>       };
>>> +
>>> +     twlusb: twl6030-usb {
>>
>> That name should be a generic device class name is possible.
>> What is twl6030-usb exactly? an USB PHY?
> 
> Of late we are calling it the comparator as it's used only to detect
> VBUS/ID events.
> Should it be like usb-comparator? What should be the label?

usb-comparator looks good and generic enough.

The label is useless until you reference it somewhere else. But in the
case of the label, it can be more specific.
But you can just use "twl-usb-comparator" for example.

>>
>>> +             compatible = "ti,twl6030-usb";
>>> +             interrupts = < 4 10 >;
>>
>> If this is for two interrupts, you'd better split them to avoid
>> confusion with irq specifiers that requires several attributes like for
>> the GIC.
> 
> yeah. Thats for 2 interrupts.
>>
>> +               interrupts = <4>, <10>; /* IRQ1 blabla, IRQ2 blabla*/
>>
>> The comments are not mandatory assuming the binding is documented.
> 
> It's documented *usb: twl6030: Add dt support for twl6030 usb*

Yeah, sorry for that, but it is indeed very confusing to review the DTS
without having the binding documentation already merged :-(

Regards,
Benoit