[PATCH v6 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs

Praveen Paneri p.paneri at samsung.com
Mon Sep 17 08:54:39 EDT 2012

Changes from v5:
Moved clk_get() to driver's probe function. Now reference clock frequency
selection value is stored in samsung_usbphy structure for later use. Used
IS_ENABLED() instead of #ifdef in samsung_usbphy_get_driver_data().

Changes from v4:
Moved header file contents to driver's source file
Removed unnecessary print message from driver's probe function
Dropped the Free Software Foundation address from the header
Changed the platform data code to use __initdata

Changes from v3:
Replaced susbsys_initcall()/module_exit() by module_platform_driver().
Accordingly in the hsotg driver returned -EPROBE_DEFER until phy driver
is registered
Removed unnecessary devm_usb_put_phy() call from the hsotg driver remove.

Changes from v2:
Changed the driver filenames to samsung-usbphy
Changed 's3c' to 'samsung' for platform device as well as platform data
Moved platform data structure to a separate file
Rectified coding style related errors

Changes from v1:
Rebased patches to latest usb-next branch
Changed the name 'sec_usbphy' to 'samsung_usbphy'

This patch set introduces a phy driver for samsung SoCs. It uses the existing
transceiver infrastructure to provide phy control functions. Use of this driver
can be extended for usb host phy as well. Over the period of time all the phy
related code for most of the samsung SoCs can be integrated here.
Removing the existing phy code from mach-s3c64xx. Same can be done for other SoCs
when they start supporting this phy driver. 
This driver is tested with smdk6410 and Exynos4210(with DT).

Praveen Paneri (5):
  usb: phy: samsung: Introducing usb phy driver for hsotg
  usb: s3c-hsotg: Adding phy driver support
  ARM: S3C64XX: Removing old phy setup code
  ARM: S3C64XX: Enabling samsung-usbphy driver
  ARM: Exynos4210: Enabling samsung-usbphy driver

 .../devicetree/bindings/usb/samsung-usbphy.txt     |    9 +
 arch/arm/boot/dts/exynos4210.dtsi                  |    5 +
 arch/arm/mach-exynos/include/mach/map.h            |    1 +
 arch/arm/mach-exynos/mach-exynos4-dt.c             |    8 +
 arch/arm/mach-exynos/setup-usb-phy.c               |   13 +
 arch/arm/mach-s3c64xx/include/mach/map.h           |    2 +
 arch/arm/mach-s3c64xx/mach-crag6410.c              |   10 +-
 arch/arm/mach-s3c64xx/mach-smartq.c                |   11 +-
 arch/arm/mach-s3c64xx/mach-smdk6410.c              |   10 +-
 arch/arm/mach-s3c64xx/setup-usb-phy.c              |   79 +----
 arch/arm/plat-samsung/devs.c                       |   28 ++
 arch/arm/plat-samsung/include/plat/devs.h          |    1 +
 arch/arm/plat-samsung/include/plat/usb-phy.h       |    1 +
 drivers/usb/gadget/s3c-hsotg.c                     |   37 ++-
 drivers/usb/phy/Kconfig                            |    8 +
 drivers/usb/phy/Makefile                           |    1 +
 drivers/usb/phy/samsung-usbphy.c                   |  360 ++++++++++++++++++++
 include/linux/platform_data/samsung-usbphy.h       |   27 ++
 18 files changed, 520 insertions(+), 91 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/samsung-usbphy.txt
 create mode 100644 drivers/usb/phy/samsung-usbphy.c
 create mode 100644 include/linux/platform_data/samsung-usbphy.h

More information about the linux-arm-kernel mailing list