[PATCH v2 3/9] net/macb: change debugging messages
Nicolas Ferre
nicolas.ferre at atmel.com
Wed Sep 19 07:55:16 EDT 2012
From: Havard Skinnemoen <havard at skinnemoen.net>
Convert some noisy netdev_dbg() statements to netdev_vdbg(). Defining
DEBUG will no longer fill up the logs; VERBOSE_DEBUG still does.
Add one more verbose debug for ISR status.
Signed-off-by: Havard Skinnemoen <havard at skinnemoen.net>
[nicolas.ferre at atmel.com: split patch in topics, add ISR status]
Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
---
drivers/net/ethernet/cadence/macb.c | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index 313cba2..2948553 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -310,7 +310,7 @@ static void macb_tx(struct macb *bp)
status = macb_readl(bp, TSR);
macb_writel(bp, TSR, status);
- netdev_dbg(bp->dev, "macb_tx status = %02lx\n", (unsigned long)status);
+ netdev_vdbg(bp->dev, "macb_tx status = %02lx\n", (unsigned long)status);
if (status & (MACB_BIT(UND) | MACB_BIT(TSR_RLE))) {
int i;
@@ -377,7 +377,7 @@ static void macb_tx(struct macb *bp)
if (!(bufstat & MACB_BIT(TX_USED)))
break;
- netdev_dbg(bp->dev, "skb %u (data %p) TX complete\n",
+ netdev_vdbg(bp->dev, "skb %u (data %p) TX complete\n",
tail, skb->data);
dma_unmap_single(&bp->pdev->dev, rp->mapping, skb->len,
DMA_TO_DEVICE);
@@ -403,7 +403,7 @@ static int macb_rx_frame(struct macb *bp, unsigned int first_frag,
len = MACB_BFEXT(RX_FRMLEN, bp->rx_ring[last_frag].ctrl);
- netdev_dbg(bp->dev, "macb_rx_frame frags %u - %u (len %u)\n",
+ netdev_vdbg(bp->dev, "macb_rx_frame frags %u - %u (len %u)\n",
first_frag, last_frag, len);
skb = netdev_alloc_skb(bp->dev, len + RX_OFFSET);
@@ -450,7 +450,7 @@ static int macb_rx_frame(struct macb *bp, unsigned int first_frag,
bp->stats.rx_packets++;
bp->stats.rx_bytes += len;
- netdev_dbg(bp->dev, "received skb of length %u, csum: %08x\n",
+ netdev_vdbg(bp->dev, "received skb of length %u, csum: %08x\n",
skb->len, skb->csum);
netif_receive_skb(skb);
@@ -532,7 +532,7 @@ static int macb_poll(struct napi_struct *napi, int budget)
work_done = 0;
- netdev_dbg(bp->dev, "poll: status = %08lx, budget = %d\n",
+ netdev_vdbg(bp->dev, "poll: status = %08lx, budget = %d\n",
(unsigned long)status, budget);
work_done = macb_rx(bp, budget);
@@ -571,6 +571,8 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
break;
}
+ netdev_vdbg(bp->dev, "isr = 0x%08lx\n", (unsigned long)status);
+
if (status & MACB_RX_INT_FLAGS) {
/*
* There's no point taking any more interrupts
@@ -582,7 +584,7 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
macb_writel(bp, IDR, MACB_RX_INT_FLAGS);
if (napi_schedule_prep(&bp->napi)) {
- netdev_dbg(bp->dev, "scheduling RX softirq\n");
+ netdev_vdbg(bp->dev, "scheduling RX softirq\n");
__napi_schedule(&bp->napi);
}
}
@@ -644,8 +646,8 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev)
u32 ctrl;
unsigned long flags;
-#ifdef DEBUG
- netdev_dbg(bp->dev,
+#if defined(DEBUG) && defined(VERBOSE_DEBUG)
+ netdev_vdbg(bp->dev,
"start_xmit: len %u head %p data %p tail %p end %p\n",
skb->len, skb->head, skb->data,
skb_tail_pointer(skb), skb_end_pointer(skb));
@@ -667,12 +669,12 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev)
}
entry = bp->tx_head;
- netdev_dbg(bp->dev, "Allocated ring entry %u\n", entry);
+ netdev_vdbg(bp->dev, "Allocated ring entry %u\n", entry);
mapping = dma_map_single(&bp->pdev->dev, skb->data,
len, DMA_TO_DEVICE);
bp->tx_skb[entry].skb = skb;
bp->tx_skb[entry].mapping = mapping;
- netdev_dbg(bp->dev, "Mapped skb data %p to DMA addr %08lx\n",
+ netdev_vdbg(bp->dev, "Mapped skb data %p to DMA addr %08lx\n",
skb->data, (unsigned long)mapping);
ctrl = MACB_BF(TX_FRMLEN, len);
--
1.7.11.3
More information about the linux-arm-kernel
mailing list