[PATCH 5/5] ARM: tegra: select SPARSE_IRQ
Stephen Warren
swarren at wwwdotorg.org
Wed Sep 19 17:31:19 EDT 2012
From: Stephen Warren <swarren at nvidia.com>
SPARSE_IRQ is required for single zImage support.
With this enabled, we can delete <mach/irqs.h>. This requires removing
one unnecessary include of that file, and hard-coding the PCIe IRQ into
the PCIe driver. This is a hack that will be dealt with as part of
converting the PCIe driver into a true DT-supporting driver.
Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
arch/arm/Kconfig | 1 +
arch/arm/mach-tegra/board-dt-tegra20.c | 1 -
arch/arm/mach-tegra/include/mach/irqs.h | 182 -------------------------------
arch/arm/mach-tegra/pcie.c | 3 +
4 files changed, 4 insertions(+), 183 deletions(-)
delete mode 100644 arch/arm/mach-tegra/include/mach/irqs.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9a87faf..f12088d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -679,6 +679,7 @@ config ARCH_TEGRA
select ARCH_HAS_CPUFREQ
select USE_OF
select COMMON_CLK
+ select SPARSE_IRQ
help
This enables support for NVIDIA Tegra based systems (Tegra APX,
Tegra 6xx and Tegra 2 series).
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index c339444..e1cb597 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -41,7 +41,6 @@
#include <asm/setup.h>
#include <mach/iomap.h>
-#include <mach/irqs.h>
#include "board.h"
#include "clock.h"
diff --git a/arch/arm/mach-tegra/include/mach/irqs.h b/arch/arm/mach-tegra/include/mach/irqs.h
deleted file mode 100644
index aad1a2c..0000000
--- a/arch/arm/mach-tegra/include/mach/irqs.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/irqs.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- * Colin Cross <ccross at google.com>
- * Erik Gilling <konkers at google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_IRQS_H
-#define __MACH_TEGRA_IRQS_H
-
-#define INT_GIC_BASE 0
-
-#define IRQ_LOCALTIMER 29
-
-/* Primary Interrupt Controller */
-#define INT_PRI_BASE (INT_GIC_BASE + 32)
-#define INT_TMR1 (INT_PRI_BASE + 0)
-#define INT_TMR2 (INT_PRI_BASE + 1)
-#define INT_RTC (INT_PRI_BASE + 2)
-#define INT_I2S2 (INT_PRI_BASE + 3)
-#define INT_SHR_SEM_INBOX_IBF (INT_PRI_BASE + 4)
-#define INT_SHR_SEM_INBOX_IBE (INT_PRI_BASE + 5)
-#define INT_SHR_SEM_OUTBOX_IBF (INT_PRI_BASE + 6)
-#define INT_SHR_SEM_OUTBOX_IBE (INT_PRI_BASE + 7)
-#define INT_VDE_UCQ_ERROR (INT_PRI_BASE + 8)
-#define INT_VDE_SYNC_TOKEN (INT_PRI_BASE + 9)
-#define INT_VDE_BSE_V (INT_PRI_BASE + 10)
-#define INT_VDE_BSE_A (INT_PRI_BASE + 11)
-#define INT_VDE_SXE (INT_PRI_BASE + 12)
-#define INT_I2S1 (INT_PRI_BASE + 13)
-#define INT_SDMMC1 (INT_PRI_BASE + 14)
-#define INT_SDMMC2 (INT_PRI_BASE + 15)
-#define INT_XIO (INT_PRI_BASE + 16)
-#define INT_VDE (INT_PRI_BASE + 17)
-#define INT_AVP_UCQ (INT_PRI_BASE + 18)
-#define INT_SDMMC3 (INT_PRI_BASE + 19)
-#define INT_USB (INT_PRI_BASE + 20)
-#define INT_USB2 (INT_PRI_BASE + 21)
-#define INT_PRI_RES_22 (INT_PRI_BASE + 22)
-#define INT_EIDE (INT_PRI_BASE + 23)
-#define INT_NANDFLASH (INT_PRI_BASE + 24)
-#define INT_VCP (INT_PRI_BASE + 25)
-#define INT_APB_DMA (INT_PRI_BASE + 26)
-#define INT_AHB_DMA (INT_PRI_BASE + 27)
-#define INT_GNT_0 (INT_PRI_BASE + 28)
-#define INT_GNT_1 (INT_PRI_BASE + 29)
-#define INT_OWR (INT_PRI_BASE + 30)
-#define INT_SDMMC4 (INT_PRI_BASE + 31)
-
-/* Secondary Interrupt Controller */
-#define INT_SEC_BASE (INT_PRI_BASE + 32)
-#define INT_GPIO1 (INT_SEC_BASE + 0)
-#define INT_GPIO2 (INT_SEC_BASE + 1)
-#define INT_GPIO3 (INT_SEC_BASE + 2)
-#define INT_GPIO4 (INT_SEC_BASE + 3)
-#define INT_UARTA (INT_SEC_BASE + 4)
-#define INT_UARTB (INT_SEC_BASE + 5)
-#define INT_I2C (INT_SEC_BASE + 6)
-#define INT_SPI (INT_SEC_BASE + 7)
-#define INT_TWC (INT_SEC_BASE + 8)
-#define INT_TMR3 (INT_SEC_BASE + 9)
-#define INT_TMR4 (INT_SEC_BASE + 10)
-#define INT_FLOW_RSM0 (INT_SEC_BASE + 11)
-#define INT_FLOW_RSM1 (INT_SEC_BASE + 12)
-#define INT_SPDIF (INT_SEC_BASE + 13)
-#define INT_UARTC (INT_SEC_BASE + 14)
-#define INT_MIPI (INT_SEC_BASE + 15)
-#define INT_EVENTA (INT_SEC_BASE + 16)
-#define INT_EVENTB (INT_SEC_BASE + 17)
-#define INT_EVENTC (INT_SEC_BASE + 18)
-#define INT_EVENTD (INT_SEC_BASE + 19)
-#define INT_VFIR (INT_SEC_BASE + 20)
-#define INT_DVC (INT_SEC_BASE + 21)
-#define INT_SYS_STATS_MON (INT_SEC_BASE + 22)
-#define INT_GPIO5 (INT_SEC_BASE + 23)
-#define INT_CPU0_PMU_INTR (INT_SEC_BASE + 24)
-#define INT_CPU1_PMU_INTR (INT_SEC_BASE + 25)
-#define INT_SEC_RES_26 (INT_SEC_BASE + 26)
-#define INT_S_LINK1 (INT_SEC_BASE + 27)
-#define INT_APB_DMA_COP (INT_SEC_BASE + 28)
-#define INT_AHB_DMA_COP (INT_SEC_BASE + 29)
-#define INT_DMA_TX (INT_SEC_BASE + 30)
-#define INT_DMA_RX (INT_SEC_BASE + 31)
-
-/* Tertiary Interrupt Controller */
-#define INT_TRI_BASE (INT_SEC_BASE + 32)
-#define INT_HOST1X_COP_SYNCPT (INT_TRI_BASE + 0)
-#define INT_HOST1X_MPCORE_SYNCPT (INT_TRI_BASE + 1)
-#define INT_HOST1X_COP_GENERAL (INT_TRI_BASE + 2)
-#define INT_HOST1X_MPCORE_GENERAL (INT_TRI_BASE + 3)
-#define INT_MPE_GENERAL (INT_TRI_BASE + 4)
-#define INT_VI_GENERAL (INT_TRI_BASE + 5)
-#define INT_EPP_GENERAL (INT_TRI_BASE + 6)
-#define INT_ISP_GENERAL (INT_TRI_BASE + 7)
-#define INT_2D_GENERAL (INT_TRI_BASE + 8)
-#define INT_DISPLAY_GENERAL (INT_TRI_BASE + 9)
-#define INT_DISPLAY_B_GENERAL (INT_TRI_BASE + 10)
-#define INT_HDMI (INT_TRI_BASE + 11)
-#define INT_TVO_GENERAL (INT_TRI_BASE + 12)
-#define INT_MC_GENERAL (INT_TRI_BASE + 13)
-#define INT_EMC_GENERAL (INT_TRI_BASE + 14)
-#define INT_TRI_RES_15 (INT_TRI_BASE + 15)
-#define INT_TRI_RES_16 (INT_TRI_BASE + 16)
-#define INT_AC97 (INT_TRI_BASE + 17)
-#define INT_SPI_2 (INT_TRI_BASE + 18)
-#define INT_SPI_3 (INT_TRI_BASE + 19)
-#define INT_I2C2 (INT_TRI_BASE + 20)
-#define INT_KBC (INT_TRI_BASE + 21)
-#define INT_EXTERNAL_PMU (INT_TRI_BASE + 22)
-#define INT_GPIO6 (INT_TRI_BASE + 23)
-#define INT_TVDAC (INT_TRI_BASE + 24)
-#define INT_GPIO7 (INT_TRI_BASE + 25)
-#define INT_UARTD (INT_TRI_BASE + 26)
-#define INT_UARTE (INT_TRI_BASE + 27)
-#define INT_I2C3 (INT_TRI_BASE + 28)
-#define INT_SPI_4 (INT_TRI_BASE + 29)
-#define INT_TRI_RES_30 (INT_TRI_BASE + 30)
-#define INT_SW_RESERVED (INT_TRI_BASE + 31)
-
-/* Quaternary Interrupt Controller */
-#define INT_QUAD_BASE (INT_TRI_BASE + 32)
-#define INT_SNOR (INT_QUAD_BASE + 0)
-#define INT_USB3 (INT_QUAD_BASE + 1)
-#define INT_PCIE_INTR (INT_QUAD_BASE + 2)
-#define INT_PCIE_MSI (INT_QUAD_BASE + 3)
-#define INT_QUAD_RES_4 (INT_QUAD_BASE + 4)
-#define INT_QUAD_RES_5 (INT_QUAD_BASE + 5)
-#define INT_QUAD_RES_6 (INT_QUAD_BASE + 6)
-#define INT_QUAD_RES_7 (INT_QUAD_BASE + 7)
-#define INT_APB_DMA_CH0 (INT_QUAD_BASE + 8)
-#define INT_APB_DMA_CH1 (INT_QUAD_BASE + 9)
-#define INT_APB_DMA_CH2 (INT_QUAD_BASE + 10)
-#define INT_APB_DMA_CH3 (INT_QUAD_BASE + 11)
-#define INT_APB_DMA_CH4 (INT_QUAD_BASE + 12)
-#define INT_APB_DMA_CH5 (INT_QUAD_BASE + 13)
-#define INT_APB_DMA_CH6 (INT_QUAD_BASE + 14)
-#define INT_APB_DMA_CH7 (INT_QUAD_BASE + 15)
-#define INT_APB_DMA_CH8 (INT_QUAD_BASE + 16)
-#define INT_APB_DMA_CH9 (INT_QUAD_BASE + 17)
-#define INT_APB_DMA_CH10 (INT_QUAD_BASE + 18)
-#define INT_APB_DMA_CH11 (INT_QUAD_BASE + 19)
-#define INT_APB_DMA_CH12 (INT_QUAD_BASE + 20)
-#define INT_APB_DMA_CH13 (INT_QUAD_BASE + 21)
-#define INT_APB_DMA_CH14 (INT_QUAD_BASE + 22)
-#define INT_APB_DMA_CH15 (INT_QUAD_BASE + 23)
-#define INT_QUAD_RES_24 (INT_QUAD_BASE + 24)
-#define INT_QUAD_RES_25 (INT_QUAD_BASE + 25)
-#define INT_QUAD_RES_26 (INT_QUAD_BASE + 26)
-#define INT_QUAD_RES_27 (INT_QUAD_BASE + 27)
-#define INT_QUAD_RES_28 (INT_QUAD_BASE + 28)
-#define INT_QUAD_RES_29 (INT_QUAD_BASE + 29)
-#define INT_QUAD_RES_30 (INT_QUAD_BASE + 30)
-#define INT_QUAD_RES_31 (INT_QUAD_BASE + 31)
-
-/* Tegra30 has 5 banks of 32 IRQs */
-#define INT_MAIN_NR (32 * 5)
-#define INT_GPIO_BASE (INT_PRI_BASE + INT_MAIN_NR)
-
-/* Tegra30 has 8 banks of 32 GPIOs */
-#define INT_GPIO_NR (32 * 8)
-
-#define TEGRA_NR_IRQS (INT_GPIO_BASE + INT_GPIO_NR)
-
-#define INT_BOARD_BASE TEGRA_NR_IRQS
-#define NR_BOARD_IRQS 32
-
-#define NR_IRQS (INT_BOARD_BASE + NR_BOARD_IRQS)
-
-#endif
diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c
index a8dba64..e82e8b8 100644
--- a/arch/arm/mach-tegra/pcie.c
+++ b/arch/arm/mach-tegra/pcie.c
@@ -43,6 +43,9 @@
#include "board.h"
+/* Hack - need to parse this from DT */
+#define INT_PCIE_INTR 130
+
/* register definitions */
#define AFI_OFFSET 0x3800
#define PADS_OFFSET 0x3000
--
1.7.0.4
More information about the linux-arm-kernel
mailing list