[PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading

[Marek Vasut]

Dear Shawn Guo,

> On Wed, Sep 19, 2012 at 12:37:17AM +0200, Marek Vasut wrote:
> > Don't load the FEC MAC address from OCOTP, but use the one supplied
> > via device tree by U-Boot. This is the preferred way, every DT-capable
> > bootloader does set up "mac-address" and "local-mac-address" properties
> > into the DT passed to the kernel.
> 
> Ok, since you are the maintainer of m28evk board, it could be your call
> to do so.  While for imx28-evk, the kernel at least runs with bootlets
> which is not DT capable.

I believe most of the mx28evks run mainline U-Boot these days. Especially since 
there is much better support in upstream u-boot than in freescale one. So what 
about dropping this function altogether or make it DT-configurable?

[...]

Best regards,
Marek Vasut