[PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading

[Maxime Ripard]

Hi Shawn,

Le 19/09/2012 05:15, Shawn Guo a écrit :
> On Wed, Sep 19, 2012 at 12:37:17AM +0200, Marek Vasut wrote:
>> Don't load the FEC MAC address from OCOTP, but use the one supplied
>> via device tree by U-Boot. This is the preferred way, every DT-capable
>> bootloader does set up "mac-address" and "local-mac-address" properties
>> into the DT passed to the kernel.
>>
> Ok, since you are the maintainer of m28evk board, it could be your call
> to do so.  While for imx28-evk, the kernel at least runs with bootlets
> which is not DT capable.
> 
>> Signed-off-by: Marek Vasut <marex at denx.de>
>> Cc: Fabio Estevam <fabio.estevam at freescale.com>
>> Cc: Shawn Guo <shawn.guo at linaro.org>
>> ---
>>  arch/arm/mach-mxs/mach-mxs.c |    2 --
>>  1 file changed, 2 deletions(-)
>>
>> diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
>> index 170a930..71d47f5 100644
>> --- a/arch/arm/mach-mxs/mach-mxs.c
>> +++ b/arch/arm/mach-mxs/mach-mxs.c
>> @@ -255,8 +255,6 @@ static void __init imx28_evk_post_init(void)
>>  
>>  static void __init m28evk_init(void)
>>  {
>> -	update_fec_mac_prop(OUI_DENX);
>> -
> 
> Since it's the only user of OUI_DENX, can we remove enum mac_oui
> completely and make update_fec_mac_prop a fsl specific call?

I have a patch on the way that adds the Crystalfontz OUI for the
CFA-10049, so it will be quite useful to me in the future.

Maxime


-- 
Maxime Ripard, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com