[PATCH 5/6 v3] ARM: integrator: convert AMBA devices to device tree
Linus Walleij
linus.walleij at linaro.org
Wed Sep 5 15:29:11 EDT 2012
This converts the AMBA (PrimeCell) devices on the Integrator/AP
and Integrator/CP over to probing from the Device Tree if the
kernel is compiled for Device Tree support.
We continue to #ifdef out all non-DT code and vice versa on
respective boot type to get a clean cut.
We need to add a bunch of auxdata (compare to the Versatile)
to handle bus names and callbacks alike.
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
ChangeLog v2->v3:
- Consolidate the common peripherals into integrator.dtsi and
just override the differences in the AP/CP .dts files.
ChangeLog v1->v2:
- Move interrupt-parent up one step to the fpga bus for the
PrimeCell devices. (Suggestion from Arnd Bergmann)
---
arch/arm/boot/dts/integrator.dtsi | 38 +++++++++++
arch/arm/boot/dts/integratorap.dts | 32 +++++++++
arch/arm/boot/dts/integratorcp.dts | 49 ++++++++++++++
arch/arm/mach-integrator/common.h | 2 +
arch/arm/mach-integrator/core.c | 8 ++-
arch/arm/mach-integrator/integrator_ap.c | 109 ++++++++++++++++++++++---------
arch/arm/mach-integrator/integrator_cp.c | 84 ++++++++++++++++++------
7 files changed, 269 insertions(+), 53 deletions(-)
diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi
index b464aba..9bcc09d 100644
--- a/arch/arm/boot/dts/integrator.dtsi
+++ b/arch/arm/boot/dts/integrator.dtsi
@@ -30,4 +30,42 @@
reg = <0x14000000 0x100>;
clear-mask = <0xffffffff>;
};
+
+ fpga {
+ compatible = "arm,amba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-parent = <&pic>;
+
+ /*
+ * These PrimeCells are in the same locations and using the
+ * same interrupts in all Integrators, however the silicon
+ * version deployed is different.
+ */
+ rtc at 15000000 {
+ reg = <0x15000000 0x1000>;
+ interrupts = <8>;
+ };
+
+ uart at 16000000 {
+ reg = <0x16000000 0x1000>;
+ interrupts = <1>;
+ };
+
+ uart at 17000000 {
+ reg = <0x17000000 0x1000>;
+ interrupts = <2>;
+ };
+
+ kmi at 18000000 {
+ reg = <0x18000000 0x1000>;
+ interrupts = <3>;
+ };
+
+ kmi at 19000000 {
+ reg = <0x19000000 0x1000>;
+ interrupts = <4>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
index 083ff39..6176775 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -33,4 +33,36 @@
pic: pic at 14000000 {
valid-mask = <0x003fffff>;
};
+
+ fpga {
+ /*
+ * The Integator/AP predates the idea to have magic numbers
+ * identifying the PrimeCell in hardware, thus we have to
+ * supply these from the device tree.
+ */
+ rtc: rtc at 15000000 {
+ compatible = "arm,pl030", "arm,primecell";
+ arm,primecell-periphid = <0x00041030>;
+ };
+
+ uart0: uart at 16000000 {
+ compatible = "arm,pl010", "arm,primecell";
+ arm,primecell-periphid = <0x00041010>;
+ };
+
+ uart1: uart at 17000000 {
+ compatible = "arm,pl010", "arm,primecell";
+ arm,primecell-periphid = <0x00041010>;
+ };
+
+ kmi0: kmi at 18000000 {
+ compatible = "arm,pl050", "arm,primecell";
+ arm,primecell-periphid = <0x00041050>;
+ };
+
+ kmi1: kmi at 19000000 {
+ compatible = "arm,pl050", "arm,primecell";
+ arm,primecell-periphid = <0x00041050>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts
index 6303314..7bd4946 100644
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/integratorcp.dts
@@ -51,4 +51,53 @@
clear-mask = <0x00000fff>;
valid-mask = <0x00000fff>;
};
+
+ fpga {
+ /*
+ * These PrimeCells are at the same location and using
+ * the same interrupts in all Integrators, but in the CP
+ * slightly newer versions are deployed.
+ */
+ rtc at 15000000 {
+ compatible = "arm,pl031", "arm,primecell";
+ };
+
+ uart at 16000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ };
+
+ uart at 17000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ };
+
+ kmi at 18000000 {
+ compatible = "arm,pl050", "arm,primecell";
+ };
+
+ kmi at 19000000 {
+ compatible = "arm,pl050", "arm,primecell";
+ };
+
+ /*
+ * These PrimeCells are only available on the Integrator/CP
+ */
+ mmc at 1c000000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x1c000000 0x1000>;
+ interrupts = <23 24>;
+ max-frequency = <515633>;
+ };
+
+ aaci at 1d000000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x1d000000 0x1000>;
+ interrupts = <25>;
+ };
+
+ clcd at c0000000 {
+ compatible = "arm,pl110", "arm,primecell";
+ reg = <0xC0000000 0x1000>;
+ interrupts = <22>;
+ };
+ };
};
diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h
index c4338e2..c3ff21b 100644
--- a/arch/arm/mach-integrator/common.h
+++ b/arch/arm/mach-integrator/common.h
@@ -1,3 +1,5 @@
+#include <linux/amba/serial.h>
+extern struct amba_pl010_data integrator_uart_data;
void integrator_init_early(void);
int integrator_init(bool is_cp);
void integrator_reserve(void);
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 268eadf..564162c 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -33,7 +33,9 @@
#include <asm/mach/time.h>
#include <asm/pgtable.h>
-static struct amba_pl010_data integrator_uart_data;
+#include "common.h"
+
+#ifndef CONFIG_OF
#define INTEGRATOR_RTC_IRQ { IRQ_RTCINT }
#define INTEGRATOR_UART0_IRQ { IRQ_UARTINT0 }
@@ -86,6 +88,8 @@ int __init integrator_init(bool is_cp)
return 0;
}
+#endif
+
/*
* On the Integrator platform, the port RTS and DTR are provided by
* bits in the following SC_CTRLS register bits:
@@ -125,7 +129,7 @@ static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *bas
__raw_writel(ctrlc, SC_CTRLC);
}
-static struct amba_pl010_data integrator_uart_data = {
+struct amba_pl010_data integrator_uart_data = {
.set_mctrl = integrator_uart_set_mctrl,
};
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 57add86..8cd0560 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -36,6 +36,7 @@
#include <linux/platform_data/clk-integrator.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
+#include <linux/of_platform.h>
#include <video/vga.h>
#include <mach/hardware.h>
@@ -271,36 +272,6 @@ static struct platform_device cfi_flash_device = {
.resource = &cfi_flash_resource,
};
-static void __init ap_init(void)
-{
- unsigned long sc_dec;
- int i;
-
- platform_device_register(&cfi_flash_device);
-
- sc_dec = readl(VA_SC_BASE + INTEGRATOR_SC_DEC_OFFSET);
- for (i = 0; i < 4; i++) {
- struct lm_device *lmdev;
-
- if ((sc_dec & (16 << i)) == 0)
- continue;
-
- lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL);
- if (!lmdev)
- continue;
-
- lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
- lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
- lmdev->resource.flags = IORESOURCE_MEM;
- lmdev->irq = IRQ_AP_EXPINT0 + i;
- lmdev->id = i;
-
- lm_device_register(lmdev);
- }
-
- integrator_init(false);
-}
-
/*
* Where is the timer (VA)?
*/
@@ -493,6 +464,52 @@ static void __init ap_init_irq_of(void)
integrator_clk_init(false);
}
+/* For the Device Tree, add in the UART callbacks as AUXDATA */
+static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE,
+ "rtc", NULL),
+ OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE,
+ "uart0", &integrator_uart_data),
+ OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE,
+ "uart1", &integrator_uart_data),
+ OF_DEV_AUXDATA("arm,primecell", KMI0_BASE,
+ "kmi0", NULL),
+ OF_DEV_AUXDATA("arm,primecell", KMI1_BASE,
+ "kmi1", NULL),
+ { /* sentinel */ },
+};
+
+static void __init ap_init_of(void)
+{
+ unsigned long sc_dec;
+ int i;
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ ap_auxdata_lookup, NULL);
+
+ platform_device_register(&cfi_flash_device);
+
+ sc_dec = readl(VA_SC_BASE + INTEGRATOR_SC_DEC_OFFSET);
+ for (i = 0; i < 4; i++) {
+ struct lm_device *lmdev;
+
+ if ((sc_dec & (16 << i)) == 0)
+ continue;
+
+ lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL);
+ if (!lmdev)
+ continue;
+
+ lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
+ lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
+ lmdev->resource.flags = IORESOURCE_MEM;
+ lmdev->irq = IRQ_AP_EXPINT0 + i;
+ lmdev->id = i;
+
+ lm_device_register(lmdev);
+ }
+}
+
static const char * ap_dt_board_compat[] = {
"arm,integrator-ap",
NULL,
@@ -506,7 +523,7 @@ DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)")
.init_irq = ap_init_irq_of,
.handle_irq = fpga_handle_irq,
.timer = &ap_of_timer,
- .init_machine = ap_init,
+ .init_machine = ap_init_of,
.restart = integrator_restart,
.dt_compat = ap_dt_board_compat,
MACHINE_END
@@ -560,6 +577,36 @@ static void __init ap_init_irq(void)
integrator_clk_init(false);
}
+static void __init ap_init(void)
+{
+ unsigned long sc_dec;
+ int i;
+
+ platform_device_register(&cfi_flash_device);
+
+ sc_dec = readl(VA_SC_BASE + INTEGRATOR_SC_DEC_OFFSET);
+ for (i = 0; i < 4; i++) {
+ struct lm_device *lmdev;
+
+ if ((sc_dec & (16 << i)) == 0)
+ continue;
+
+ lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL);
+ if (!lmdev)
+ continue;
+
+ lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
+ lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
+ lmdev->resource.flags = IORESOURCE_MEM;
+ lmdev->irq = IRQ_AP_EXPINT0 + i;
+ lmdev->id = i;
+
+ lm_device_register(lmdev);
+ }
+
+ integrator_init(false);
+}
+
MACHINE_START(INTEGRATOR, "ARM-Integrator")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 6a2293a..f032238 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -25,6 +25,7 @@
#include <linux/platform_data/clk-integrator.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
+#include <linux/of_platform.h>
#include <mach/hardware.h>
#include <mach/platform.h>
@@ -245,16 +246,6 @@ static struct mmci_platform_data mmc_data = {
.gpio_cd = -1,
};
-#define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
-#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT }
-
-static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE,
- INTEGRATOR_CP_MMC_IRQS, &mmc_data);
-
-static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE,
- INTEGRATOR_CP_AACI_IRQS, NULL);
-
-
/*
* CLCD support
*/
@@ -305,15 +296,6 @@ static struct clcd_board clcd_data = {
.remove = versatile_clcd_remove_dma,
};
-static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE,
- { IRQ_CP_CLCDCINT }, &clcd_data);
-
-static struct amba_device *amba_devs[] __initdata = {
- &mmc_device,
- &aaci_device,
- &clcd_device,
-};
-
#define REFCOUNTER (__io_address(INTEGRATOR_HDR_BASE) + 0x28)
static void __init intcp_init_early(void)
@@ -372,6 +354,37 @@ static void __init intcp_init_irq_of(void)
integrator_clk_init(true);
}
+/*
+ * For the Device Tree, add in the UART, MMC and CLCD specifics as AUXDATA
+ * and enforce the bus names since these are used for clock lookups.
+ */
+static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE,
+ "rtc", NULL),
+ OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE,
+ "uart0", &integrator_uart_data),
+ OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE,
+ "uart1", &integrator_uart_data),
+ OF_DEV_AUXDATA("arm,primecell", KMI0_BASE,
+ "kmi0", NULL),
+ OF_DEV_AUXDATA("arm,primecell", KMI1_BASE,
+ "kmi1", NULL),
+ OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_MMC_BASE,
+ "mmci", &mmc_data),
+ OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_AACI_BASE,
+ "aaci", &mmc_data),
+ OF_DEV_AUXDATA("arm,primecell", INTCP_PA_CLCD_BASE,
+ "clcd", &clcd_data),
+ { /* sentinel */ },
+};
+
+static void __init intcp_init_of(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ intcp_auxdata_lookup, NULL);
+ platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs));
+}
+
static const char * intcp_dt_board_compat[] = {
"arm,integrator-cp",
NULL,
@@ -385,7 +398,7 @@ DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)")
.init_irq = intcp_init_irq_of,
.handle_irq = fpga_handle_irq,
.timer = &cp_of_timer,
- .init_machine = intcp_init,
+ .init_machine = intcp_init_of,
.restart = integrator_restart,
.dt_compat = intcp_dt_board_compat,
MACHINE_END
@@ -453,6 +466,37 @@ static struct sys_timer cp_timer = {
.init = intcp_timer_init,
};
+#define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
+#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT }
+
+static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE,
+ INTEGRATOR_CP_MMC_IRQS, &mmc_data);
+
+static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE,
+ INTEGRATOR_CP_AACI_IRQS, NULL);
+
+static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE,
+ { IRQ_CP_CLCDCINT }, &clcd_data);
+
+static struct amba_device *amba_devs[] __initdata = {
+ &mmc_device,
+ &aaci_device,
+ &clcd_device,
+};
+
+static void __init intcp_init(void)
+{
+ int i;
+
+ platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs));
+
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+ struct amba_device *d = amba_devs[i];
+ amba_device_register(d, &iomem_resource);
+ }
+ integrator_init(true);
+}
+
MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,
--
1.7.11.4
More information about the linux-arm-kernel
mailing list