[PATCH] ARM: kirkwood: fix LEDs names for lsxl boards

[Michael Walle]

Don't use the specific board name in a the common device tree include file.
Instead use the common name 'lsxl'.

Signed-off-by: Michael Walle <michael at walle.cc>
---
 arch/arm/boot/dts/kirkwood-lsxl.dtsi |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 8ac51c0..a1dd36d 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -67,28 +67,28 @@
 		compatible = "gpio-leds";
 
 		led at 1 {
-			label = "lschlv2:blue:func";
+			label = "lsxl:blue:func";
 			gpios = <&gpio1 4 1>;
 		};
 
 		led at 2 {
-			label = "lschlv2:red:alarm";
+			label = "lsxl:red:alarm";
 			gpios = <&gpio1 5 1>;
 		};
 
 		led at 3 {
-			label = "lschlv2:amber:info";
+			label = "lsxl:amber:info";
 			gpios = <&gpio1 6 1>;
 		};
 
 		led at 4 {
-			label = "lschlv2:blue:power";
+			label = "lsxl:blue:power";
 			gpios = <&gpio1 7 1>;
 			linux,default-trigger = "default-on";
 		};
 
 		led at 5 {
-			label = "lschlv2:red:func";
+			label = "lsxl:red:func";
 			gpios = <&gpio1 16 1>;
 		};
 	};
-- 
1.7.2.5