[PATCH V2] ARM: mx28: Skip OCOTP FEC MAC setup if in DT

[Shawn Guo]

On Tue, Sep 25, 2012 at 01:32:18PM +0200, Marek Vasut wrote:
> Currently, the kernel unconditionally adds "local-mac-address" and
> "mac-address" properties under both FEC ethernet DT nodes in case
> the update_fec_mac_prop() function is called. These properties are
> loaded with MAC address compiled from vendors OUI and a per-device
> NIC saved in OCOTP storage.
> 
> Some more advanced bootloaders do augment the DT passed to the kernel
> by these properties already. In such case, it is wrong for kernel to
> override these values.
> 
> Adjust the FEC MAC address loading so that in case the DT properties
> are already present in the DT passed from the bootloader, skip the
> loading from OCOTP altogether. If the DT properties are not present,
> load them from OCOTP.
> 
> Note that the later case will lead to zeroed out MAC address if OCOTP
> is not programmed. This will lead to FEC not working at all.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Fabio Estevam <fabio.estevam at freescale.com>
> Cc: Shawn Guo <shawn.guo at linaro.org>

Queued for 3.8, thanks.