[PATCH 3/5] ARM: OMAP2+: select PINCTRL in Kconfig

[Tony Lindgren]

From: AnilKumar Ch <anilkumar at ti.com>

Select PINCTRL in Kconfig under Typical OMAP configuration, this
is required to add pinctrl driver to omap2+ family of devices.

Signed-off-by: AnilKumar Ch <anilkumar at ti.com>
[tony at atomide.com: updated to select pinctrl-single in defconfig]
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
 arch/arm/configs/omap2plus_defconfig |    1 +
 arch/arm/mach-omap2/Kconfig          |    1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index e58edc3..6230304 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -123,6 +123,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_SPI=y
 CONFIG_SPI_OMAP24XX=y
+CONFIG_PINCTRL_SINGLE=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_TWL4030=y
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 4a4d058..e45bbff 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -18,6 +18,7 @@ config ARCH_OMAP2PLUS_TYPICAL
 	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
 	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
 	select HIGHMEM
+	select PINCTRL
 	help
 	  Compile a kernel suitable for booting most boards