[PATCH V2 1/2] hwmon: Add devicetree bindings to gpio-fan

[Andrew Lunn]

On Mon, Sep 10, 2012 at 02:51:51PM +0100, Jamie Lentin wrote:
> Allow a gpio-fan to be defined in devicetree, see binding documentation
> for details.
> 
> Changes since V1:-
> * Don't hide return codes [Guenter Roeck]
> * Remove typecast noise [Guenter Roeck]
> * Use of_find_property instead of counting u32s [Guenter Roeck]
> * Don't count GPIOs twice [Andrew Lunn]
> * Use of_prop_next_u32 to get records in a more obvious fashion
> * Use CONFIG_OF_GPIO instead of CONFIG_OF
> * Apply __devinitdata to of_gpio_fan_match [Andrew Lunn]
> 
> Signed-off-by: Jamie Lentin <jm at lentin.co.uk>
> ---
>  .../devicetree/bindings/gpio/gpio-fan.txt          |   25 +++++
>  drivers/hwmon/gpio-fan.c                           |  116 ++++++++++++++++++++
>  2 files changed, 141 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/gpio-fan.txt

Hi Jamie

Thanks for addressing all the issues raised. However...

Anything before the --- ends up in the changelog entry. Anything
afterwards does not.

The changes you made to address review comments is not something for
the changelog, so Changes since V1:- should be after the --- .

There is more detail in Documentation/SubmittingPatches

      Andrew