[PATCH 04/16] at91: regroup gpio and pinctrl under the same ranges
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Mon Sep 17 11:27:01 EDT 2012
Fix also the reg size as we have 512 bytes bank not 256 bytes per gpio/mux
controller
Acked-by: Linus Walleij <linus.walleij at linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
arch/arm/boot/dts/at91sam9260.dtsi | 59 ++++++++++++---------
arch/arm/boot/dts/at91sam9263.dtsi | 102 +++++++++++++++++++-----------------
arch/arm/boot/dts/at91sam9g45.dtsi | 95 +++++++++++++++++----------------
arch/arm/boot/dts/at91sam9n12.dtsi | 83 +++++++++++++++--------------
arch/arm/boot/dts/at91sam9x5.dtsi | 77 ++++++++++++++-------------
5 files changed, 225 insertions(+), 191 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 7c95f76..3ae7abcd 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -97,34 +97,41 @@
interrupts = <26 4 0 27 4 0 28 4 0>;
};
- pioA: gpio at fffff400 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff400 0x100>;
- interrupts = <2 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ pinctrl at fffff400 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfffff400 0xfffff400 0x600>;
+
+ pioA: gpio at fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <2 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
- pioB: gpio at fffff600 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff600 0x100>;
- interrupts = <3 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ pioB: gpio at fffff600 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x200>;
+ interrupts = <3 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
- pioC: gpio at fffff800 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff800 0x100>;
- interrupts = <4 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
+ pioC: gpio at fffff800 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x200>;
+ interrupts = <4 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
dbgu: serial at fffff200 {
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 195019b..ff882a6 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -88,54 +88,60 @@
reg = <0xfffffd10 0x10>;
};
- pioA: gpio at fffff200 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff200 0x100>;
- interrupts = <2 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pioB: gpio at fffff400 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff400 0x100>;
- interrupts = <3 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pioC: gpio at fffff600 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff600 0x100>;
- interrupts = <4 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pioD: gpio at fffff800 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff800 0x100>;
- interrupts = <4 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pioE: gpio at fffffa00 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffffa00 0x100>;
- interrupts = <4 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
+ pinctrl at fffff200 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfffff200 0xfffff200 0xa00>;
+
+ pioA: gpio at fffff200 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff200 0x200>;
+ interrupts = <2 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioB: gpio at fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <3 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioC: gpio at fffff600 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x200>;
+ interrupts = <4 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioD: gpio at fffff800 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x200>;
+ interrupts = <4 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioE: gpio at fffffa00 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x200>;
+ interrupts = <4 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
dbgu: serial at ffffee00 {
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 63751b1..990f2b1 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -106,54 +106,61 @@
interrupts = <21 4 0>;
};
- pioA: gpio at fffff200 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff200 0x100>;
- interrupts = <2 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ pinctrl at fffff200 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfffff200 0xfffff200 0xa00>;
+
+ pioA: gpio at fffff200 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff200 0x200>;
+ interrupts = <2 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
- pioB: gpio at fffff400 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff400 0x100>;
- interrupts = <3 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ pioB: gpio at fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <3 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
- pioC: gpio at fffff600 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff600 0x100>;
- interrupts = <4 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ pioC: gpio at fffff600 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x200>;
+ interrupts = <4 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
- pioD: gpio at fffff800 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff800 0x100>;
- interrupts = <5 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ pioD: gpio at fffff800 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x200>;
+ interrupts = <5 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
- pioE: gpio at fffffa00 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffffa00 0x100>;
- interrupts = <5 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
+ pioE: gpio at fffffa00 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x200>;
+ interrupts = <5 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
dbgu: serial at ffffee00 {
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index ef9336a..29706bd 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -100,44 +100,51 @@
interrupts = <20 4 0>;
};
- pioA: gpio at fffff400 {
- compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
- reg = <0xfffff400 0x100>;
- interrupts = <2 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pioB: gpio at fffff600 {
- compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
- reg = <0xfffff600 0x100>;
- interrupts = <2 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pioC: gpio at fffff800 {
- compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
- reg = <0xfffff800 0x100>;
- interrupts = <3 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pioD: gpio at fffffa00 {
- compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
- reg = <0xfffffa00 0x100>;
- interrupts = <3 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
+ pinctrl at fffff400 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfffff400 0xfffff400 0x800>;
+
+ pioA: gpio at fffff400 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <2 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioB: gpio at fffff600 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x200>;
+ interrupts = <2 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioC: gpio at fffff800 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x200>;
+ interrupts = <3 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioD: gpio at fffffa00 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x200>;
+ interrupts = <3 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
dbgu: serial at fffff200 {
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 8a387a8..bc6cd3f 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -108,44 +108,51 @@
interrupts = <21 4 0>;
};
- pioA: gpio at fffff400 {
- compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
- reg = <0xfffff400 0x100>;
- interrupts = <2 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ pinctrl at fffff200 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfffff400 0xfffff400 0x800>;
+
+ pioA: gpio at fffff400 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <2 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
- pioB: gpio at fffff600 {
- compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
- reg = <0xfffff600 0x100>;
- interrupts = <2 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ pioB: gpio at fffff600 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x200>;
+ interrupts = <2 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
- pioC: gpio at fffff800 {
- compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
- reg = <0xfffff800 0x100>;
- interrupts = <3 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ pioC: gpio at fffff800 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x200>;
+ interrupts = <3 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
- pioD: gpio at fffffa00 {
- compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
- reg = <0xfffffa00 0x100>;
- interrupts = <3 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
+ pioD: gpio at fffffa00 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x200>;
+ interrupts = <3 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
dbgu: serial at fffff200 {
--
1.7.10.4
More information about the linux-arm-kernel
mailing list