[PATCH 5/5] omap-serial: Request pins using pinctrl framework

[Tony Lindgren]

Request pins using pinctrl framework. Only show a warning
on error as some boards set the pins in the bootloader
even if CONFIG_PINCTRL is enabled.

Cc: linux-serial at vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
 arch/arm/plat-omap/include/plat/omap-serial.h |    1 +
 drivers/tty/serial/omap-serial.c              |   10 ++++++++++
 2 files changed, 11 insertions(+)

diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index 1a52725..0f4de14 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -106,6 +106,7 @@ struct uart_omap_port {
 	struct uart_port	port;
 	struct uart_omap_dma	uart_dma;
 	struct platform_device	*pdev;
+	struct pinctrl		*pins;
 
 	unsigned char		ier;
 	unsigned char		lcr;
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index d3cda0c..068e88c 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -39,6 +39,7 @@
 #include <linux/irq.h>
 #include <linux/pm_runtime.h>
 #include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
 
 #include <plat/dma.h>
 #include <plat/dmtimer.h>
@@ -1492,6 +1493,13 @@ static int serial_omap_probe(struct platform_device *pdev)
 		goto err_port_line;
 	}
 
+	up->pins = pinctrl_get_select_default(&pdev->dev);
+	if (IS_ERR(up->pins)) {
+		dev_warn(&pdev->dev, "did not get pins for uart%i error: %li\n",
+			 up->port.line, PTR_ERR(up->pins));
+		up->pins = NULL;
+	}
+
 	sprintf(up->name, "OMAP UART%d", up->port.line);
 	up->port.mapbase = mem->start;
 	up->port.membase = devm_ioremap(&pdev->dev, mem->start,
@@ -1570,6 +1578,8 @@ static int serial_omap_remove(struct platform_device *dev)
 		pm_runtime_disable(&up->pdev->dev);
 		uart_remove_one_port(&serial_omap_reg, &up->port);
 		pm_qos_remove_request(&up->pm_qos_request);
+		if (up->pins)
+			pinctrl_put(up->pins);
 	}
 
 	platform_set_drvdata(dev, NULL);