[PATCH 1/2] ARM: Kirkwood: ehci-orion: Add device tree binding
Andrew Lunn
andrew at lunn.ch
Sat Sep 1 05:26:25 EDT 2012
Based on previous work by Michael Walle and Jason Cooper.
Made their work actually work, which required added interrupt from DT
and auxdata, along with setting the dma_mask, which DT does not
currently do.
Signed-off-by: Andrew Lunn <andrew at lunn.ch>
---
.../devicetree/bindings/usb/ehci-orion.txt | 19 +++++++
drivers/usb/host/ehci-orion.c | 59 +++++++++++++++++++-
2 files changed, 75 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/ehci-orion.txt
diff --git a/Documentation/devicetree/bindings/usb/ehci-orion.txt b/Documentation/devicetree/bindings/usb/ehci-orion.txt
new file mode 100644
index 0000000..1bd704e
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ehci-orion.txt
@@ -0,0 +1,19 @@
+* EHCI controller, Orion Marvell variants
+
+Required properties:
+- compatible: must be "marvell,orion-ehci"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: The EHCI interrupt
+- phy-version: Can be one of:
+ "NA" - Don't touch the phy, something else has already configured it.
+ "orion5x" - PHY setup as specified by the Orion5x Errata
+
+Example:
+
+ ehci at 50000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0x50000 0x1000>;
+ interrupts = <19>;
+ phy-version = "NA";
+ };
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index b34b928..605feb09 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -14,6 +14,9 @@
#include <linux/mbus.h>
#include <linux/clk.h>
#include <linux/platform_data/ehci-orion.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
#define rdl(off) __raw_readl(hcd->regs + (off))
#define wrl(off, val) __raw_writel((val), hcd->regs + (off))
@@ -181,6 +184,27 @@ ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
}
}
+static const int get_phy_version(struct device_node *np)
+{
+ const char *pm;
+ int err;
+
+ err = of_property_read_string(np, "phy-version", &pm);
+
+ if (err < 0)
+ return err;
+
+
+ if (!strcasecmp(pm, "NA"))
+ return EHCI_PHY_NA;
+ if (!strcasecmp(pm, "orion5x"))
+ return EHCI_PHY_ORION;
+
+ return -ENODEV;
+}
+
+static u64 ehci_orion_dma_mask = DMA_BIT_MASK(32);
+
static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
{
struct orion_ehci_data *pd = pdev->dev.platform_data;
@@ -191,13 +215,17 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
struct clk *clk;
void __iomem *regs;
int irq, err;
+ enum orion_ehci_phy_ver phy_version;
if (usb_disabled())
return -ENODEV;
pr_debug("Initializing Orion-SoC USB Host Controller\n");
- irq = platform_get_irq(pdev, 0);
+ if (pdev->dev.of_node)
+ irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+ else
+ irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
dev_err(&pdev->dev,
"Found HC with no IRQ. Check %s setup!\n",
@@ -215,6 +243,14 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
goto err1;
}
+ /*
+ * Right now device-tree probed devices don't get dma_mask
+ * set. Since shared usb code relies on it, set it here for
+ * now. Once we have dma capability bindings this can go away.
+ */
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &ehci_orion_dma_mask;
+
if (!request_mem_region(res->start, resource_size(res),
ehci_orion_hc_driver.description)) {
dev_dbg(&pdev->dev, "controller already in use\n");
@@ -262,7 +298,14 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
/*
* setup Orion USB controller.
*/
- switch (pd->phy_version) {
+ if (pdev->dev.of_node) {
+ phy_version = get_phy_version(pdev->dev.of_node);
+ if (phy_version < 0)
+ goto err3;
+ } else
+ phy_version = pd->phy_version;
+
+ switch (phy_version) {
case EHCI_PHY_NA: /* dont change USB phy settings */
break;
case EHCI_PHY_ORION:
@@ -317,9 +360,19 @@ static int __exit ehci_orion_drv_remove(struct platform_device *pdev)
MODULE_ALIAS("platform:orion-ehci");
+static const struct of_device_id ehci_orion_dt_ids[] __devinitdata = {
+ { .compatible = "marvell,orion-ehci", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids);
+
static struct platform_driver ehci_orion_driver = {
.probe = ehci_orion_drv_probe,
.remove = __exit_p(ehci_orion_drv_remove),
.shutdown = usb_hcd_platform_shutdown,
- .driver.name = "orion-ehci",
+ .driver = {
+ .name = "orion-ehci",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(ehci_orion_dt_ids),
+ },
};
--
1.7.10.4
More information about the linux-arm-kernel
mailing list