[PATCH 07/12] ARM: move all dtb targets out of Makefile.boot

[Jean-Christophe PLAGNIOL-VILLARD]

On 15:12 Thu 06 Sep     , Rob Herring wrote:
> From: Rob Herring <rob.herring at calxeda.com>
> 
> In preparation to support multi-platform kernels, move all the dtb targets
> out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile
> which is closer to the sources.
> 
> Signed-off-by: Rob Herring <rob.herring at calxeda.com>
> Cc: Russell King <linux at arm.linux.org.uk>
> Cc: Andrew Victor <linux at maxim.org.za>
> Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
> Cc: Jean-Christophe Plagniol-Villard <plagnioj at jcrosoft.com>
> Cc: Kukjin Kim <kgene.kim at samsung.com>
> Cc: Sascha Hauer <kernel at pengutronix.de>
> Cc: Jason Cooper <jason at lakedaemon.net>
> Cc: Andrew Lunn <andrew at lunn.ch>
> Cc: Gregory Clement <gregory.clement at free-electrons.com>
> Cc: Shawn Guo <shawn.guo at linaro.org>
> Cc: Viresh Kumar <viresh.linux at gmail.com>
> Cc: Shiraz Hashim <shiraz.hashim at st.com>
> Cc: Rajeev Kumar <rajeev-dlh.kumar at st.com>
> Cc: Stephen Warren <swarren at wwwdotorg.org>
> Cc: Srinidhi Kasagar <srinidhi.kasagar at stericsson.com>
> Cc: Linus Walleij <linus.walleij at linaro.org>
> ---
>  arch/arm/boot/Makefile                |    2 ++
>  arch/arm/boot/dts/Makefile            |   41 +++++++++++++++++++++++++++++++++
>  arch/arm/mach-at91/Makefile.boot      |   24 -------------------
>  arch/arm/mach-exynos/Makefile.boot    |    3 ---
>  arch/arm/mach-imx/Makefile.boot       |    7 ------
>  arch/arm/mach-kirkwood/Makefile.boot  |   11 ---------
>  arch/arm/mach-lpc32xx/Makefile.boot   |    2 --
>  arch/arm/mach-mvebu/Makefile.boot     |    2 --
>  arch/arm/mach-mxs/Makefile.boot       |    9 --------
>  arch/arm/mach-spear13xx/Makefile.boot |    3 ---
>  arch/arm/mach-spear3xx/Makefile.boot  |    4 ----
>  arch/arm/mach-spear6xx/Makefile.boot  |    2 --
>  arch/arm/mach-tegra/Makefile.boot     |    8 -------
>  arch/arm/mach-ux500/Makefile.boot     |    2 --
>  arch/arm/mach-vexpress/Makefile.boot  |    5 ----
>  15 files changed, 43 insertions(+), 82 deletions(-)
>  create mode 100644 arch/arm/boot/dts/Makefile
> 
> diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
> index c877087..3fdab01 100644
> --- a/arch/arm/boot/Makefile
> +++ b/arch/arm/boot/Makefile
> @@ -15,6 +15,8 @@ ifneq ($(MACHINE),)
>  include $(srctree)/$(MACHINE)/Makefile.boot
>  endif
>  
> +include $(srctree)/arch/arm/boot/dts/Makefile
> +
>  # Note: the following conditions must always be true:
>  #   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
>  #   PARAMS_PHYS must be within 4MB of ZRELADDR
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> new file mode 100644
> index 0000000..e59586b
> --- /dev/null
> +++ b/arch/arm/boot/dts/Makefile
> @@ -0,0 +1,41 @@
> +dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb
sorry I see no need of the dtb-y

just do all the time

Best Regards,
J.