[PATCH] ARM: shmobile: kzm9g: enable DMAEngine on SHDI0 and SDHI2

Tetsuyuki Kobayshi koba at kmckk.co.jp
Thu Sep 6 05:09:31 EDT 2012


From: Tetsuyuki Kobayashi <koba at kmckk.co.jp>

This patch enables DMAEngine on SHDI0 and SDHI2 for kzm9g.

Signed-off-by: Tetsuyuki Kobayashi <koba at kmckk.co.jp>
---
 arch/arm/mach-shmobile/board-kzm9g.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 87ec4ce..d849e6d 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -384,6 +384,8 @@ static struct regulator_consumer_supply fixed2v8_power_consumers[] =
 
 /* SDHI */
 static struct sh_mobile_sdhi_info sdhi0_info = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
 	.tmio_ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29,
@@ -424,6 +426,8 @@ static struct platform_device sdhi0_device = {
 
 /* Micro SD */
 static struct sh_mobile_sdhi_info sdhi2_info = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI2_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI2_RX,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT |
 			  TMIO_MMC_USE_GPIO_CD |
 			  TMIO_MMC_WRPROTECT_DISABLE,
-- 
1.7.9.5




More information about the linux-arm-kernel mailing list