[PATCH] USB: chipidea: use OTGSC_BSV to detect vbus valid

[Richard Zhao]

On Mon, Sep 17, 2012 at 04:52:59PM +0800, Chen Peter-B29397 wrote:
>  
> 
>  
> > 
> > OTGSC_AVVIS cannot be set when vbus voltage goes valid or invalid on
> > imx, so convert to use OTGSC_BSV.
> > 
> 
> Not just on imx, from the IC guys, it is chipidea's feature.
> the AVVIS will not go to 1 when the vbus goes to high if ID = 1.
Alex,

Is it ok to you? If you think the commit message is ambiguous, it could
be changed.

Thanks
Richard