[PATCH 07/12] ARM: move all dtb targets out of Makefile.boot

Rob Herring robherring2 at gmail.com
Thu Sep 6 16:12:50 EDT 2012 

From: Rob Herring <rob.herring at calxeda.com>

In preparation to support multi-platform kernels, move all the dtb targets
out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile
which is closer to the sources.

Signed-off-by: Rob Herring <rob.herring at calxeda.com>
Cc: Russell King <linux at arm.linux.org.uk>
Cc: Andrew Victor <linux at maxim.org.za>
Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj at jcrosoft.com>
Cc: Kukjin Kim <kgene.kim at samsung.com>
Cc: Sascha Hauer <kernel at pengutronix.de>
Cc: Jason Cooper <jason at lakedaemon.net>
Cc: Andrew Lunn <andrew at lunn.ch>
Cc: Gregory Clement <gregory.clement at free-electrons.com>
Cc: Shawn Guo <shawn.guo at linaro.org>
Cc: Viresh Kumar <viresh.linux at gmail.com>
Cc: Shiraz Hashim <shiraz.hashim at st.com>
Cc: Rajeev Kumar <rajeev-dlh.kumar at st.com>
Cc: Stephen Warren <swarren at wwwdotorg.org>
Cc: Srinidhi Kasagar <srinidhi.kasagar at stericsson.com>
Cc: Linus Walleij <linus.walleij at linaro.org>
---
 arch/arm/boot/Makefile                |    2 ++
 arch/arm/boot/dts/Makefile            |   41 +++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/Makefile.boot      |   24 -------------------
 arch/arm/mach-exynos/Makefile.boot    |    3 ---
 arch/arm/mach-imx/Makefile.boot       |    7 ------
 arch/arm/mach-kirkwood/Makefile.boot  |   11 ---------
 arch/arm/mach-lpc32xx/Makefile.boot   |    2 --
 arch/arm/mach-mvebu/Makefile.boot     |    2 --
 arch/arm/mach-mxs/Makefile.boot       |    9 --------
 arch/arm/mach-spear13xx/Makefile.boot |    3 ---
 arch/arm/mach-spear3xx/Makefile.boot  |    4 ----
 arch/arm/mach-spear6xx/Makefile.boot  |    2 --
 arch/arm/mach-tegra/Makefile.boot     |    8 -------
 arch/arm/mach-ux500/Makefile.boot     |    2 --
 arch/arm/mach-vexpress/Makefile.boot  |    5 ----
 15 files changed, 43 insertions(+), 82 deletions(-)
 create mode 100644 arch/arm/boot/dts/Makefile

diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index c877087..3fdab01 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -15,6 +15,8 @@ ifneq ($(MACHINE),)
 include $(srctree)/$(MACHINE)/Makefile.boot
 endif
 
+include $(srctree)/arch/arm/boot/dts/Makefile
+
 # Note: the following conditions must always be true:
 #   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
 #   PARAMS_PHYS must be within 4MB of ZRELADDR
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
new file mode 100644
index 0000000..e59586b
--- /dev/null
+++ b/arch/arm/boot/dts/Makefile
@@ -0,0 +1,41 @@
+dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb
+dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb tegra20-paz00.dtb \
+	tegra20-seaboard.dtb tegra20-trimslice.dtb tegra20-ventana.dtb \
+	tegra20-whistler.dtb
+dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb
+dtb-$(CONFIG_BOARD_SPEAR600_DT)	+= spear600-evb.dtb
+dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-db.dtb armada-xp-db.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += aks-cdu.dtb at91sam9263ek.dtb \
+	at91sam9g20ek_2mmc.dtb at91sam9g20ek.dtb at91sam9g25ek.dtb \
+	at91sam9m10g45ek.dtb at91sam9n12ek.dtb ethernut5.dtb evk-pro3.dtb \
+	kizbox.dtb tny_a9260.dtb tny_a9263.dtb tny_a9g20.dtb usb_a9260.dtb \
+	usb_a9263.dtb usb_a9g20.dtb
+dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb kirkwood-dns325.dtb
+dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb
+dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb
+dtb-$(CONFIG_MACH_EXYNOS5_DT) += exynos5250-smdk5250.dtb
+dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
+dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
+dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
+dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb
+dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \
+	imx53-qsb.dtb imx53-smd.dtb
+dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
+dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb
+dtb-$(CONFIG_MACH_SNOWBALL) += snowball.dtb
+dtb-$(CONFIG_MACH_SPEAR1310) += spear1310-evb.dtb
+dtb-$(CONFIG_MACH_SPEAR1340) += spear1340-evb.dtb
+dtb-$(CONFIG_MACH_SPEAR300) += spear300-evb.dtb
+dtb-$(CONFIG_MACH_SPEAR310) += spear310-evb.dtb
+dtb-$(CONFIG_MACH_SPEAR320) += spear320-evb.dtb
+dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6281.dtb kirkwood-ts219-6282.dtb
+dtb-$(CONFIG_SOC_IMX6Q)	+= imx6q-arm2.dtb imx6q-sabrelite.dtb \
+			   imx6q-sabresd.dtb
+dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb imx23-olinuxino.dtb \
+	 imx23-stmp378x_devb.dtb imx28-apx4devkit.dtb \
+	 imx28-cfa10036.dtb imx28-evk.dtb \
+	 imx28-m28evk.dtb imx28-tx28.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
+	   vexpress-v2p-ca9.dtb vexpress-v2p-ca15-tc1.dtb \
+	   vexpress-v2p-ca15_a7.dtb
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 30bb733..5309f9b 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -12,27 +12,3 @@ else
 params_phys-y	:= 0x20000100
 initrd_phys-y	:= 0x20410000
 endif
-
-# Keep dtb files sorted alphabetically for each SoC
-# sam9260
-dtb-$(CONFIG_MACH_AT91SAM_DT) += aks-cdu.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += evk-pro3.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
-# sam9263
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9263ek.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9263.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9263.dtb
-# sam9g20
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek_2mmc.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += kizbox.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9g20.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb
-# sam9g45
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb
-# sam9n12
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9n12ek.dtb
-# sam9x5
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g25ek.dtb
diff --git a/arch/arm/mach-exynos/Makefile.boot b/arch/arm/mach-exynos/Makefile.boot
index 31bd181..b9862e2 100644
--- a/arch/arm/mach-exynos/Makefile.boot
+++ b/arch/arm/mach-exynos/Makefile.boot
@@ -1,5 +1,2 @@
    zreladdr-y	+= 0x40008000
 params_phys-y	:= 0x40000100
-
-dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb
-dtb-$(CONFIG_MACH_EXYNOS5_DT) += exynos5250-smdk5250.dtb
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 05541cf..b27815d 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -37,10 +37,3 @@ initrd_phys-$(CONFIG_SOC_IMX53)	:= 0x70800000
 zreladdr-$(CONFIG_SOC_IMX6Q)	+= 0x10008000
 params_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10000100
 initrd_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10800000
-
-dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb
-dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \
-			       imx53-qsb.dtb imx53-smd.dtb
-dtb-$(CONFIG_SOC_IMX6Q)	+= imx6q-arm2.dtb \
-			   imx6q-sabrelite.dtb \
-			   imx6q-sabresd.dtb \
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
index a13299d..760a0ef 100644
--- a/arch/arm/mach-kirkwood/Makefile.boot
+++ b/arch/arm/mach-kirkwood/Makefile.boot
@@ -1,14 +1,3 @@
    zreladdr-y	+= 0x00008000
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
-
-dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb
-dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
-dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
-dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
-dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
-dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-ts219-6281.dtb
-dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-ts219-6282.dtb
-dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
-dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
-dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb
diff --git a/arch/arm/mach-lpc32xx/Makefile.boot b/arch/arm/mach-lpc32xx/Makefile.boot
index 697323b..d7392a4 100644
--- a/arch/arm/mach-lpc32xx/Makefile.boot
+++ b/arch/arm/mach-lpc32xx/Makefile.boot
@@ -1,5 +1,3 @@
    zreladdr-y	+= 0x80008000
 params_phys-y	:= 0x80000100
 initrd_phys-y	:= 0x82000000
-
-dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
diff --git a/arch/arm/mach-mvebu/Makefile.boot b/arch/arm/mach-mvebu/Makefile.boot
index 2579a2f..b327175 100644
--- a/arch/arm/mach-mvebu/Makefile.boot
+++ b/arch/arm/mach-mvebu/Makefile.boot
@@ -1,3 +1 @@
 zreladdr-y := 0x00008000
-dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-db.dtb
-dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-xp-db.dtb
diff --git a/arch/arm/mach-mxs/Makefile.boot b/arch/arm/mach-mxs/Makefile.boot
index 4582999..07b11fe 100644
--- a/arch/arm/mach-mxs/Makefile.boot
+++ b/arch/arm/mach-mxs/Makefile.boot
@@ -1,10 +1 @@
 zreladdr-y += 0x40008000
-
-dtb-y += imx23-evk.dtb \
-	 imx23-olinuxino.dtb \
-	 imx23-stmp378x_devb.dtb \
-	 imx28-apx4devkit.dtb \
-	 imx28-cfa10036.dtb \
-	 imx28-evk.dtb \
-	 imx28-m28evk.dtb \
-	 imx28-tx28.dtb \
diff --git a/arch/arm/mach-spear13xx/Makefile.boot b/arch/arm/mach-spear13xx/Makefile.boot
index 403efd7..4674a4c 100644
--- a/arch/arm/mach-spear13xx/Makefile.boot
+++ b/arch/arm/mach-spear13xx/Makefile.boot
@@ -1,6 +1,3 @@
 zreladdr-y	+= 0x00008000
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
-
-dtb-$(CONFIG_MACH_SPEAR1310)	+= spear1310-evb.dtb
-dtb-$(CONFIG_MACH_SPEAR1340)	+= spear1340-evb.dtb
diff --git a/arch/arm/mach-spear3xx/Makefile.boot b/arch/arm/mach-spear3xx/Makefile.boot
index d93e217..4674a4c 100644
--- a/arch/arm/mach-spear3xx/Makefile.boot
+++ b/arch/arm/mach-spear3xx/Makefile.boot
@@ -1,7 +1,3 @@
 zreladdr-y	+= 0x00008000
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
-
-dtb-$(CONFIG_MACH_SPEAR300)	+= spear300-evb.dtb
-dtb-$(CONFIG_MACH_SPEAR310)	+= spear310-evb.dtb
-dtb-$(CONFIG_MACH_SPEAR320)	+= spear320-evb.dtb
diff --git a/arch/arm/mach-spear6xx/Makefile.boot b/arch/arm/mach-spear6xx/Makefile.boot
index af493da..4674a4c 100644
--- a/arch/arm/mach-spear6xx/Makefile.boot
+++ b/arch/arm/mach-spear6xx/Makefile.boot
@@ -1,5 +1,3 @@
 zreladdr-y	+= 0x00008000
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
-
-dtb-$(CONFIG_BOARD_SPEAR600_DT)	+= spear600-evb.dtb
diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot
index 7a1bb62..2943381 100644
--- a/arch/arm/mach-tegra/Makefile.boot
+++ b/arch/arm/mach-tegra/Makefile.boot
@@ -1,11 +1,3 @@
 zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC)	+= 0x00008000
 params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC)	:= 0x00000100
 initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC)	:= 0x00800000
-
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-paz00.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-seaboard.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-trimslice.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-ventana.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-whistler.dtb
-dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb
diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot
index dd5cd00..760a0ef 100644
--- a/arch/arm/mach-ux500/Makefile.boot
+++ b/arch/arm/mach-ux500/Makefile.boot
@@ -1,5 +1,3 @@
    zreladdr-y	+= 0x00008000
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
-
-dtb-$(CONFIG_MACH_SNOWBALL) += snowball.dtb
diff --git a/arch/arm/mach-vexpress/Makefile.boot b/arch/arm/mach-vexpress/Makefile.boot
index 318d308..c6dd891 100644
--- a/arch/arm/mach-vexpress/Makefile.boot
+++ b/arch/arm/mach-vexpress/Makefile.boot
@@ -3,8 +3,3 @@
    zreladdr-y	+= 0x60008000
 params_phys-y	:= 0x60000100
 initrd_phys-y	:= 0x60800000
-
-dtb-$(CONFIG_ARCH_VEXPRESS_DT)	+= vexpress-v2p-ca5s.dtb \
-				   vexpress-v2p-ca9.dtb \
-				   vexpress-v2p-ca15-tc1.dtb \
-				   vexpress-v2p-ca15_a7.dtb
-- 
1.7.9.5

More information about the linux-arm-kernel mailing list