[PATCH v2 0/4] can: c_can: Add suspend/resume and pinctrl support

[AnilKumar, Chimata]

On Thu, Sep 06, 2012 at 04:56:10, Tony Lindgren wrote:
> * Marc Kleine-Budde <mkl at pengutronix.de> [120905 06:55]:
> > On 09/05/2012 01:54 PM, Marc Kleine-Budde wrote:
> > > On 09/05/2012 01:12 PM, AnilKumar Ch wrote:
> > >> Adds suspend/resume functionality of d_can driver along with d_can
> > >> raminit support which is required to initialize RAM while data
> > >> transmission.
> > >>
> > >> This patch series also adds pinctrl support to c_can driver. These
> > >> patches were tested on AM335x-EVM.
> > >>
> > >> This patch-series is based ontop of runtimePM patch submitted
> > >> earlier - https://patchwork.kernel.org/patch/1348081/
> > > 
> > > Looks good, I'll apply the series after Tony acks the patch 3
> > > ([PATCH RESEND 3/4] ARM: AM33XX: board-generic: Add of_dev_auxdata to
> > > pass d_can raminit).
> > 
> > I've pushed all patches to can-next/master [1]. When Tony gives his Ack,
> > I'll send David a pull request (of a tree including that Ack).
> 
> To me it looks like we can avoid the platform callbacks and the ram
> init changes to the driver by implementing right runtime PM calls
> for omap/am33xx. So NAK on few patches, and ACK on one :)
> 

Marc,

Can you please queue ACK patch for 3.7, I will submit v3 for rest of
the patches, once we found the clear way of doing RAMINIT.

Thanks
AnilKumar