[PATCH 1/3] ARM: dts: imx53-qsb: Use pinctrl for gpio-led

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at freescale.com>

Since commit 8fe4554f (leds: leds-gpio: adopt pinctrl support) gpio-led driver 
has pinctrl support, so setup the gpio led pin via pinctrl and avoid the 
following warning:

leds-gpio leds.2: pins are not configured from the driver

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 arch/arm/boot/dts/imx53-qsb.dts |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index 08948af..5bae4c7 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -60,10 +60,16 @@
 							697  0x80000000	/* MX53_PAD_EIM_DA12__GPIO3_12 */
 							701  0x80000000	/* MX53_PAD_EIM_DA13__GPIO3_13 */
 							868  0x80000000	/* MX53_PAD_PATA_DA_0__GPIO7_6 */
+						>;
+					};
+
+					led_pin_gpio7_7: led_gpio7_7 at 0 {
+						fsl,pins = <
 							873  0x80000000	/* MX53_PAD_PATA_DA_1__GPIO7_7 */
 						>;
 					};
 				};
+
 			};
 
 			uart1: serial at 53fbc000 {
@@ -216,6 +222,8 @@
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio7_7>;
 
 		user {
 			label = "Heartbeat";
-- 
1.7.9.5