[PATCHv5 04/10] ARM: OMAP3: set autoidle flag for sdrc_ick

[Tero Kristo]

sdrc_ick doesn't have autoidle flag on HW, but is always automatically
idled. Thus mark the autoidle flag statically as true for it to reflect
hardware behavior. The clock will no longer show as active in usecount
dumps and will allow the voltdm->sleep / wakeup calls to work properly.

Signed-off-by: Tero Kristo <t-kristo at ti.com>
Cc: Paul Walmsley <paul at pwsan.com>
Cc: Kevin Hilman <khilman at ti.com>
Reviewed-by: Rajendra Nayak <rnayak at ti.com>
---
 arch/arm/mach-omap2/clock3xxx_data.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 83bed9a..1ddc7fc 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -1739,6 +1739,7 @@ static struct clk sdrc_ick = {
 	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
+	.autoidle	= true,
 };
 
 static struct clk gpmc_fck = {
-- 
1.7.4.1