[PATCH v2] media: davinci: vpif: display: separate out subdev from output

Hans Verkuil hverkuil at xs4all.nl
Mon Sep 24 06:59:11 EDT 2012


On Mon September 24 2012 12:44:11 Prabhakar wrote:
> From: Lad, Prabhakar <prabhakar.lad at ti.com>
> 
> vpif_display relied on a 1-1 mapping of output and subdev. This is not
> necessarily the case. Separate the two. So there is a list of subdevs
> and a list of outputs. Each output refers to a subdev and has routing
> information. An output does not have to have a subdev.
> 
> The initial output for each channel is set to the fist output.
> 
> Currently missing is support for associating multiple subdevs with
> an output.
> 
> Signed-off-by: Lad, Prabhakar <prabhakar.lad at ti.com>
> Signed-off-by: Manjunath Hadli <manjunath.hadli at ti.com>
> Cc: Hans Verkuil <hans.verkuil at cisco.com>
> Cc: Sekhar Nori <nsekhar at ti.com>

Acked-by: Hans Verkuil <hans.verkuil at cisco.com>

Regards,

	Hans

> ---
>  This patch is dependent on the patch series from Hans
>  (http://www.mail-archive.com/linux-media@vger.kernel.org/msg52270.html)
> 
>  Changes for V2:
>  1: Changed v4l2_device_call_until_err() call to v4l2_subdev_call() for
>     s_routing, since this call is for specific subdev, pointed out by Hans.
> 
>  arch/arm/mach-davinci/board-da850-evm.c       |   29 +++++-
>  arch/arm/mach-davinci/board-dm646x-evm.c      |   39 ++++++-
>  drivers/media/platform/davinci/vpif_display.c |  136 ++++++++++++++++++++-----
>  include/media/davinci/vpif_types.h            |   20 +++-
>  4 files changed, 183 insertions(+), 41 deletions(-)
> 
> diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
> index 3081ea4..23a7012 100644
> --- a/arch/arm/mach-davinci/board-da850-evm.c
> +++ b/arch/arm/mach-davinci/board-da850-evm.c
> @@ -46,6 +46,7 @@
>  #include <mach/spi.h>
>  
>  #include <media/tvp514x.h>
> +#include <media/adv7343.h>
>  
>  #define DA850_EVM_PHY_ID		"davinci_mdio-0:00"
>  #define DA850_LCD_PWR_PIN		GPIO_TO_PIN(2, 8)
> @@ -1257,16 +1258,34 @@ static struct vpif_subdev_info da850_vpif_subdev[] = {
>  	},
>  };
>  
> -static const char const *vpif_output[] = {
> -		"Composite",
> -		"S-Video",
> +static const struct vpif_output da850_ch0_outputs[] = {
> +	{
> +		.output = {
> +			.index = 0,
> +			.name = "Composite",
> +			.type = V4L2_OUTPUT_TYPE_ANALOG,
> +		},
> +		.subdev_name = "adv7343",
> +		.output_route = ADV7343_COMPOSITE_ID,
> +	},
> +	{
> +		.output = {
> +			.index = 1,
> +			.name = "S-Video",
> +			.type = V4L2_OUTPUT_TYPE_ANALOG,
> +		},
> +		.subdev_name = "adv7343",
> +		.output_route = ADV7343_SVIDEO_ID,
> +	},
>  };
>  
>  static struct vpif_display_config da850_vpif_display_config = {
>  	.subdevinfo   = da850_vpif_subdev,
>  	.subdev_count = ARRAY_SIZE(da850_vpif_subdev),
> -	.output       = vpif_output,
> -	.output_count = ARRAY_SIZE(vpif_output),
> +	.chan_config[0] = {
> +		.outputs = da850_ch0_outputs,
> +		.output_count = ARRAY_SIZE(da850_ch0_outputs),
> +	},
>  	.card_name    = "DA850/OMAP-L138 Video Display",
>  };
>  
> diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
> index ad249c7..c206768 100644
> --- a/arch/arm/mach-davinci/board-dm646x-evm.c
> +++ b/arch/arm/mach-davinci/board-dm646x-evm.c
> @@ -26,6 +26,7 @@
>  #include <linux/i2c/pcf857x.h>
>  
>  #include <media/tvp514x.h>
> +#include <media/adv7343.h>
>  
>  #include <linux/mtd/mtd.h>
>  #include <linux/mtd/nand.h>
> @@ -496,18 +497,44 @@ static struct vpif_subdev_info dm646x_vpif_subdev[] = {
>  	},
>  };
>  
> -static const char *output[] = {
> -	"Composite",
> -	"Component",
> -	"S-Video",
> +static const struct vpif_output dm6467_ch0_outputs[] = {
> +	{
> +		.output = {
> +			.index = 0,
> +			.name = "Composite",
> +			.type = V4L2_OUTPUT_TYPE_ANALOG,
> +		},
> +		.subdev_name = "adv7343",
> +		.output_route = ADV7343_COMPOSITE_ID,
> +	},
> +	{
> +		.output = {
> +			.index = 1,
> +			.name = "Component",
> +			.type = V4L2_OUTPUT_TYPE_ANALOG,
> +		},
> +		.subdev_name = "adv7343",
> +		.output_route = ADV7343_COMPONENT_ID,
> +	},
> +	{
> +		.output = {
> +			.index = 2,
> +			.name = "S-Video",
> +			.type = V4L2_OUTPUT_TYPE_ANALOG,
> +		},
> +		.subdev_name = "adv7343",
> +		.output_route = ADV7343_SVIDEO_ID,
> +	},
>  };
>  
>  static struct vpif_display_config dm646x_vpif_display_config = {
>  	.set_clock	= set_vpif_clock,
>  	.subdevinfo	= dm646x_vpif_subdev,
>  	.subdev_count	= ARRAY_SIZE(dm646x_vpif_subdev),
> -	.output		= output,
> -	.output_count	= ARRAY_SIZE(output),
> +	.chan_config[0] = {
> +		.outputs = dm6467_ch0_outputs,
> +		.output_count = ARRAY_SIZE(dm6467_ch0_outputs),
> +	},
>  	.card_name	= "DM646x EVM",
>  };
>  
> diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c
> index 8d1ce09..f68780f 100644
> --- a/drivers/media/platform/davinci/vpif_display.c
> +++ b/drivers/media/platform/davinci/vpif_display.c
> @@ -308,7 +308,7 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
>  		channel2_intr_assert();
>  		channel2_intr_enable(1);
>  		enable_channel2(1);
> -		if (vpif_config_data->ch2_clip_en)
> +		if (vpif_config_data->chan_config[VPIF_CHANNEL2_VIDEO].clip_en)
>  			channel2_clipping_enable(1);
>  	}
>  
> @@ -317,7 +317,7 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
>  		channel3_intr_assert();
>  		channel3_intr_enable(1);
>  		enable_channel3(1);
> -		if (vpif_config_data->ch3_clip_en)
> +		if (vpif_config_data->chan_config[VPIF_CHANNEL3_VIDEO].clip_en)
>  			channel3_clipping_enable(1);
>  	}
>  
> @@ -1174,14 +1174,16 @@ static int vpif_streamoff(struct file *file, void *priv,
>  	if (buftype == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
>  		/* disable channel */
>  		if (VPIF_CHANNEL2_VIDEO == ch->channel_id) {
> -			if (vpif_config_data->ch2_clip_en)
> +			if (vpif_config_data->
> +				chan_config[VPIF_CHANNEL2_VIDEO].clip_en)
>  				channel2_clipping_enable(0);
>  			enable_channel2(0);
>  			channel2_intr_enable(0);
>  		}
>  		if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) ||
>  					(2 == common->started)) {
> -			if (vpif_config_data->ch3_clip_en)
> +			if (vpif_config_data->
> +				chan_config[VPIF_CHANNEL3_VIDEO].clip_en)
>  				channel3_clipping_enable(0);
>  			enable_channel3(0);
>  			channel3_intr_enable(0);
> @@ -1214,41 +1216,118 @@ static int vpif_enum_output(struct file *file, void *fh,
>  {
>  
>  	struct vpif_display_config *config = vpif_dev->platform_data;
> +	struct vpif_display_chan_config *chan_cfg;
> +	struct vpif_fh *vpif_handler = fh;
> +	struct channel_obj *ch = vpif_handler->channel;
>  
> -	if (output->index >= config->output_count) {
> +	chan_cfg = &config->chan_config[ch->channel_id];
> +	if (output->index >= chan_cfg->output_count) {
>  		vpif_dbg(1, debug, "Invalid output index\n");
>  		return -EINVAL;
>  	}
>  
> -	strcpy(output->name, config->output[output->index]);
> -	output->type = V4L2_OUTPUT_TYPE_ANALOG;
> +	memcpy(output, &chan_cfg->outputs[output->index].output,
> +		sizeof(*output));
>  	output->std = VPIF_V4L2_STD;
>  
>  	return 0;
>  }
>  
> +/**
> + * vpif_output_to_subdev() - Maps output to sub device
> + * @vpif_cfg - global config ptr
> + * @chan_cfg - channel config ptr
> + * @index - Given output index from application
> + *
> + * lookup the sub device information for a given output index.
> + * we report all the output to application. output table also
> + * has sub device name for the each output
> + */
> +static int
> +vpif_output_to_subdev(struct vpif_display_config *vpif_cfg,
> +		      struct vpif_display_chan_config *chan_cfg, int index)
> +{
> +	struct vpif_subdev_info *subdev_info;
> +	const char *subdev_name;
> +	int i;
> +
> +	vpif_dbg(2, debug, "vpif_output_to_subdev\n");
> +
> +	if (chan_cfg->outputs == NULL)
> +		return -1;
> +
> +	subdev_name = chan_cfg->outputs[index].subdev_name;
> +	if (subdev_name == NULL)
> +		return -1;
> +
> +	/* loop through the sub device list to get the sub device info */
> +	for (i = 0; i < vpif_cfg->subdev_count; i++) {
> +		subdev_info = &vpif_cfg->subdevinfo[i];
> +		if (!strcmp(subdev_info->name, subdev_name))
> +			return i;
> +	}
> +	return -1;
> +}
> +
> +/**
> + * vpif_set_output() - Select an output
> + * @vpif_cfg - global config ptr
> + * @ch - channel
> + * @index - Given output index from application
> + *
> + * Select the given output.
> + */
> +static int vpif_set_output(struct vpif_display_config *vpif_cfg,
> +		      struct channel_obj *ch, int index)
> +{
> +	struct vpif_display_chan_config *chan_cfg =
> +		&vpif_cfg->chan_config[ch->channel_id];
> +	struct vpif_subdev_info *subdev_info = NULL;
> +	struct v4l2_subdev *sd = NULL;
> +	u32 input = 0, output = 0;
> +	int sd_index;
> +	int ret;
> +
> +	sd_index = vpif_output_to_subdev(vpif_cfg, chan_cfg, index);
> +	if (sd_index >= 0) {
> +		sd = vpif_obj.sd[sd_index];
> +		subdev_info = &vpif_cfg->subdevinfo[sd_index];
> +	}
> +
> +	if (sd) {
> +		input = chan_cfg->outputs[index].input_route;
> +		output = chan_cfg->outputs[index].output_route;
> +		ret = v4l2_subdev_call(sd, video, s_routing, input, output, 0);
> +		if (ret < 0) {
> +			vpif_err("Failed to set output\n");
> +			return ret;
> +		}
> +
> +	}
> +	ch->output_idx = index;
> +	ch->sd = sd;
> +	return 0;
> +}
> +
>  static int vpif_s_output(struct file *file, void *priv, unsigned int i)
>  {
> +	struct vpif_display_config *config = vpif_dev->platform_data;
> +	struct vpif_display_chan_config *chan_cfg;
>  	struct vpif_fh *fh = priv;
>  	struct channel_obj *ch = fh->channel;
>  	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
> -	int ret = 0;
> +
> +	chan_cfg = &config->chan_config[ch->channel_id];
> +
> +	if (i >= chan_cfg->output_count)
> +		return -EINVAL;
>  
>  	if (common->started) {
>  		vpif_err("Streaming in progress\n");
>  		return -EBUSY;
>  	}
>  
> -	ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video,
> -							s_routing, 0, i, 0);
> -
> -	if (ret < 0)
> -		vpif_err("Failed to set output standard\n");
> -
> -	ch->output_idx = i;
> -	if (vpif_obj.sd[i])
> -		ch->sd = vpif_obj.sd[i];
> -	return ret;
> +	return vpif_set_output(config, ch, i);
>  }
>  
>  static int vpif_g_output(struct file *file, void *priv, unsigned int *i)
> @@ -1291,9 +1370,12 @@ vpif_enum_dv_timings(struct file *file, void *priv,
>  {
>  	struct vpif_fh *fh = priv;
>  	struct channel_obj *ch = fh->channel;
> +	int ret;
>  
> -	return v4l2_subdev_call(vpif_obj.sd[ch->output_idx],
> -			video, enum_dv_timings, timings);
> +	ret = v4l2_subdev_call(ch->sd, video, enum_dv_timings, timings);
> +	if (ret == -ENOIOCTLCMD && ret == -ENODEV)
> +		return -EINVAL;
> +	return ret;
>  }
>  
>  /**
> @@ -1320,12 +1402,9 @@ static int vpif_s_dv_timings(struct file *file, void *priv,
>  
>  	/* Configure subdevice timings, if any */
>  	ret = v4l2_subdev_call(ch->sd, video, s_dv_timings, timings);
> -	if (ret == -ENOIOCTLCMD) {
> -		vpif_dbg(2, debug, "Custom DV timings not supported by "
> -				"subdevice\n");
> -		return -ENODATA;
> -	}
> -	if (ret < 0 && ret != -ENODEV) {
> +	if (ret == -ENOIOCTLCMD || ret == -ENODEV)
> +		ret = 0;
> +	if (ret < 0) {
>  		vpif_dbg(2, debug, "Error setting custom DV timings\n");
>  		return ret;
>  	}
> @@ -1754,6 +1833,11 @@ static __init int vpif_probe(struct platform_device *pdev)
>  		ch->video_dev->lock = &common->lock;
>  		video_set_drvdata(ch->video_dev, ch);
>  
> +		/* select output 0 */
> +		err = vpif_set_output(config, ch, 0);
> +		if (err)
> +			goto probe_out;
> +
>  		/* register video device */
>  		vpif_dbg(1, debug, "channel=%x,channel->video_dev=%x\n",
>  				(int)ch, (int)&ch->video_dev);
> diff --git a/include/media/davinci/vpif_types.h b/include/media/davinci/vpif_types.h
> index 65e8fe1..4b297eb 100644
> --- a/include/media/davinci/vpif_types.h
> +++ b/include/media/davinci/vpif_types.h
> @@ -20,6 +20,7 @@
>  #include <linux/i2c.h>
>  
>  #define VPIF_CAPTURE_MAX_CHANNELS	2
> +#define VPIF_DISPLAY_MAX_CHANNELS	2
>  
>  enum vpif_if_type {
>  	VPIF_IF_BT656,
> @@ -39,15 +40,26 @@ struct vpif_subdev_info {
>  	struct i2c_board_info board_info;
>  };
>  
> +struct vpif_output {
> +	struct v4l2_output output;
> +	const char *subdev_name;
> +	u32 input_route;
> +	u32 output_route;
> +};
> +
> +struct vpif_display_chan_config {
> +	struct vpif_interface vpif_if;
> +	const struct vpif_output *outputs;
> +	int output_count;
> +	bool clip_en;
> +};
> +
>  struct vpif_display_config {
>  	int (*set_clock)(int, int);
>  	struct vpif_subdev_info *subdevinfo;
>  	int subdev_count;
> -	const char **output;
> -	int output_count;
> +	struct vpif_display_chan_config chan_config[VPIF_DISPLAY_MAX_CHANNELS];
>  	const char *card_name;
> -	bool ch2_clip_en;
> -	bool ch3_clip_en;
>  };
>  
>  struct vpif_input {
> 



More information about the linux-arm-kernel mailing list