[PATCH v2] media: davinci: vpif: display: separate out subdev from output
Hans Verkuil
hverkuil at xs4all.nl
Mon Sep 24 07:50:00 EDT 2012
On Mon September 24 2012 12:59:11 Hans Verkuil wrote:
> On Mon September 24 2012 12:44:11 Prabhakar wrote:
> > From: Lad, Prabhakar <prabhakar.lad at ti.com>
> >
> > vpif_display relied on a 1-1 mapping of output and subdev. This is not
> > necessarily the case. Separate the two. So there is a list of subdevs
> > and a list of outputs. Each output refers to a subdev and has routing
> > information. An output does not have to have a subdev.
> >
> > The initial output for each channel is set to the fist output.
> >
> > Currently missing is support for associating multiple subdevs with
> > an output.
> >
> > Signed-off-by: Lad, Prabhakar <prabhakar.lad at ti.com>
> > Signed-off-by: Manjunath Hadli <manjunath.hadli at ti.com>
> > Cc: Hans Verkuil <hans.verkuil at cisco.com>
> > Cc: Sekhar Nori <nsekhar at ti.com>
>
> Acked-by: Hans Verkuil <hans.verkuil at cisco.com>
I'm retracting this Ack. I did see something that wasn't right but I thought
it was harmless, but after thinking some more I believe it should be fixed.
Luckily, it's easy to fix. See below. Since we need a new version anyway I
also added a comment to a few minor issues that can be fixed at the same time.
>
> Regards,
>
> Hans
>
> > ---
> > This patch is dependent on the patch series from Hans
> > (http://www.mail-archive.com/linux-media@vger.kernel.org/msg52270.html)
> >
> > Changes for V2:
> > 1: Changed v4l2_device_call_until_err() call to v4l2_subdev_call() for
> > s_routing, since this call is for specific subdev, pointed out by Hans.
> >
> > arch/arm/mach-davinci/board-da850-evm.c | 29 +++++-
> > arch/arm/mach-davinci/board-dm646x-evm.c | 39 ++++++-
> > drivers/media/platform/davinci/vpif_display.c | 136 ++++++++++++++++++++-----
> > include/media/davinci/vpif_types.h | 20 +++-
> > 4 files changed, 183 insertions(+), 41 deletions(-)
> >
> > diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
> > index 3081ea4..23a7012 100644
> > --- a/arch/arm/mach-davinci/board-da850-evm.c
> > +++ b/arch/arm/mach-davinci/board-da850-evm.c
> > @@ -46,6 +46,7 @@
> > #include <mach/spi.h>
> >
> > #include <media/tvp514x.h>
> > +#include <media/adv7343.h>
> >
> > #define DA850_EVM_PHY_ID "davinci_mdio-0:00"
> > #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
> > @@ -1257,16 +1258,34 @@ static struct vpif_subdev_info da850_vpif_subdev[] = {
> > },
> > };
> >
> > -static const char const *vpif_output[] = {
> > - "Composite",
> > - "S-Video",
> > +static const struct vpif_output da850_ch0_outputs[] = {
> > + {
> > + .output = {
> > + .index = 0,
> > + .name = "Composite",
> > + .type = V4L2_OUTPUT_TYPE_ANALOG,
> > + },
> > + .subdev_name = "adv7343",
> > + .output_route = ADV7343_COMPOSITE_ID,
> > + },
> > + {
> > + .output = {
> > + .index = 1,
> > + .name = "S-Video",
> > + .type = V4L2_OUTPUT_TYPE_ANALOG,
> > + },
> > + .subdev_name = "adv7343",
> > + .output_route = ADV7343_SVIDEO_ID,
> > + },
> > };
> >
> > static struct vpif_display_config da850_vpif_display_config = {
> > .subdevinfo = da850_vpif_subdev,
> > .subdev_count = ARRAY_SIZE(da850_vpif_subdev),
> > - .output = vpif_output,
> > - .output_count = ARRAY_SIZE(vpif_output),
> > + .chan_config[0] = {
> > + .outputs = da850_ch0_outputs,
> > + .output_count = ARRAY_SIZE(da850_ch0_outputs),
> > + },
> > .card_name = "DA850/OMAP-L138 Video Display",
> > };
> >
> > diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
> > index ad249c7..c206768 100644
> > --- a/arch/arm/mach-davinci/board-dm646x-evm.c
> > +++ b/arch/arm/mach-davinci/board-dm646x-evm.c
> > @@ -26,6 +26,7 @@
> > #include <linux/i2c/pcf857x.h>
> >
> > #include <media/tvp514x.h>
> > +#include <media/adv7343.h>
> >
> > #include <linux/mtd/mtd.h>
> > #include <linux/mtd/nand.h>
> > @@ -496,18 +497,44 @@ static struct vpif_subdev_info dm646x_vpif_subdev[] = {
> > },
> > };
> >
> > -static const char *output[] = {
> > - "Composite",
> > - "Component",
> > - "S-Video",
> > +static const struct vpif_output dm6467_ch0_outputs[] = {
> > + {
> > + .output = {
> > + .index = 0,
> > + .name = "Composite",
> > + .type = V4L2_OUTPUT_TYPE_ANALOG,
> > + },
> > + .subdev_name = "adv7343",
> > + .output_route = ADV7343_COMPOSITE_ID,
> > + },
> > + {
> > + .output = {
> > + .index = 1,
> > + .name = "Component",
> > + .type = V4L2_OUTPUT_TYPE_ANALOG,
> > + },
> > + .subdev_name = "adv7343",
> > + .output_route = ADV7343_COMPONENT_ID,
> > + },
> > + {
> > + .output = {
> > + .index = 2,
> > + .name = "S-Video",
> > + .type = V4L2_OUTPUT_TYPE_ANALOG,
> > + },
> > + .subdev_name = "adv7343",
> > + .output_route = ADV7343_SVIDEO_ID,
> > + },
> > };
> >
> > static struct vpif_display_config dm646x_vpif_display_config = {
> > .set_clock = set_vpif_clock,
> > .subdevinfo = dm646x_vpif_subdev,
> > .subdev_count = ARRAY_SIZE(dm646x_vpif_subdev),
> > - .output = output,
> > - .output_count = ARRAY_SIZE(output),
> > + .chan_config[0] = {
> > + .outputs = dm6467_ch0_outputs,
> > + .output_count = ARRAY_SIZE(dm6467_ch0_outputs),
> > + },
> > .card_name = "DM646x EVM",
> > };
> >
> > diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c
> > index 8d1ce09..f68780f 100644
> > --- a/drivers/media/platform/davinci/vpif_display.c
> > +++ b/drivers/media/platform/davinci/vpif_display.c
> > @@ -308,7 +308,7 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
> > channel2_intr_assert();
> > channel2_intr_enable(1);
> > enable_channel2(1);
> > - if (vpif_config_data->ch2_clip_en)
> > + if (vpif_config_data->chan_config[VPIF_CHANNEL2_VIDEO].clip_en)
> > channel2_clipping_enable(1);
> > }
> >
> > @@ -317,7 +317,7 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
> > channel3_intr_assert();
> > channel3_intr_enable(1);
> > enable_channel3(1);
> > - if (vpif_config_data->ch3_clip_en)
> > + if (vpif_config_data->chan_config[VPIF_CHANNEL3_VIDEO].clip_en)
> > channel3_clipping_enable(1);
> > }
> >
> > @@ -1174,14 +1174,16 @@ static int vpif_streamoff(struct file *file, void *priv,
> > if (buftype == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
> > /* disable channel */
> > if (VPIF_CHANNEL2_VIDEO == ch->channel_id) {
> > - if (vpif_config_data->ch2_clip_en)
> > + if (vpif_config_data->
> > + chan_config[VPIF_CHANNEL2_VIDEO].clip_en)
> > channel2_clipping_enable(0);
> > enable_channel2(0);
> > channel2_intr_enable(0);
> > }
> > if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) ||
> > (2 == common->started)) {
> > - if (vpif_config_data->ch3_clip_en)
> > + if (vpif_config_data->
> > + chan_config[VPIF_CHANNEL3_VIDEO].clip_en)
> > channel3_clipping_enable(0);
> > enable_channel3(0);
> > channel3_intr_enable(0);
> > @@ -1214,41 +1216,118 @@ static int vpif_enum_output(struct file *file, void *fh,
> > {
> >
> > struct vpif_display_config *config = vpif_dev->platform_data;
> > + struct vpif_display_chan_config *chan_cfg;
> > + struct vpif_fh *vpif_handler = fh;
> > + struct channel_obj *ch = vpif_handler->channel;
> >
> > - if (output->index >= config->output_count) {
> > + chan_cfg = &config->chan_config[ch->channel_id];
> > + if (output->index >= chan_cfg->output_count) {
> > vpif_dbg(1, debug, "Invalid output index\n");
> > return -EINVAL;
> > }
> >
> > - strcpy(output->name, config->output[output->index]);
> > - output->type = V4L2_OUTPUT_TYPE_ANALOG;
> > + memcpy(output, &chan_cfg->outputs[output->index].output,
> > + sizeof(*output));
*output = chan_cfg->outputs[output->index].output;
> > output->std = VPIF_V4L2_STD;
This should be part of chan_cfg->outputs[output->index].output and not be
overridden. If the output is a HDTV output, then std should be 0, otherwise
it should be whatever the std is that is supported by the output.
Really no different to what we do in vpif_capture.
> >
> > return 0;
> > }
> >
> > +/**
> > + * vpif_output_to_subdev() - Maps output to sub device
> > + * @vpif_cfg - global config ptr
> > + * @chan_cfg - channel config ptr
> > + * @index - Given output index from application
> > + *
> > + * lookup the sub device information for a given output index.
> > + * we report all the output to application. output table also
> > + * has sub device name for the each output
> > + */
> > +static int
> > +vpif_output_to_subdev(struct vpif_display_config *vpif_cfg,
> > + struct vpif_display_chan_config *chan_cfg, int index)
> > +{
> > + struct vpif_subdev_info *subdev_info;
> > + const char *subdev_name;
> > + int i;
> > +
> > + vpif_dbg(2, debug, "vpif_output_to_subdev\n");
> > +
> > + if (chan_cfg->outputs == NULL)
> > + return -1;
> > +
> > + subdev_name = chan_cfg->outputs[index].subdev_name;
> > + if (subdev_name == NULL)
> > + return -1;
> > +
> > + /* loop through the sub device list to get the sub device info */
> > + for (i = 0; i < vpif_cfg->subdev_count; i++) {
> > + subdev_info = &vpif_cfg->subdevinfo[i];
> > + if (!strcmp(subdev_info->name, subdev_name))
> > + return i;
> > + }
> > + return -1;
> > +}
> > +
> > +/**
> > + * vpif_set_output() - Select an output
> > + * @vpif_cfg - global config ptr
> > + * @ch - channel
> > + * @index - Given output index from application
> > + *
> > + * Select the given output.
> > + */
> > +static int vpif_set_output(struct vpif_display_config *vpif_cfg,
> > + struct channel_obj *ch, int index)
> > +{
> > + struct vpif_display_chan_config *chan_cfg =
> > + &vpif_cfg->chan_config[ch->channel_id];
> > + struct vpif_subdev_info *subdev_info = NULL;
> > + struct v4l2_subdev *sd = NULL;
> > + u32 input = 0, output = 0;
> > + int sd_index;
> > + int ret;
> > +
> > + sd_index = vpif_output_to_subdev(vpif_cfg, chan_cfg, index);
> > + if (sd_index >= 0) {
> > + sd = vpif_obj.sd[sd_index];
> > + subdev_info = &vpif_cfg->subdevinfo[sd_index];
> > + }
> > +
> > + if (sd) {
> > + input = chan_cfg->outputs[index].input_route;
> > + output = chan_cfg->outputs[index].output_route;
> > + ret = v4l2_subdev_call(sd, video, s_routing, input, output, 0);
> > + if (ret < 0) {
Replace with:
if (ret < 0 && ret != -ENOIOCTLCMD) {
It's OK if the subdev doesn't support this s_routing operation.
> > + vpif_err("Failed to set output\n");
> > + return ret;
> > + }
> > +
> > + }
> > + ch->output_idx = index;
> > + ch->sd = sd;
Just like in the capture case you should update tvnorms:
ch->video_dev->tvnorms = chan_cfg->inputs[index].output.std;
Make sure tvnorms is no longer set in vpif_video_template.
Ditto for current_norm. Since vpif_display.c supports g_std the current_norm
field shouldn't be used anymore.
The capture case also updates vpifparams.iface:
ch->vpifparams.iface = chan_cfg->vpif_if;
Isn't that needed for output as well?
> > + return 0;
> > +}
> > +
> > static int vpif_s_output(struct file *file, void *priv, unsigned int i)
> > {
> > + struct vpif_display_config *config = vpif_dev->platform_data;
> > + struct vpif_display_chan_config *chan_cfg;
> > struct vpif_fh *fh = priv;
> > struct channel_obj *ch = fh->channel;
> > struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
> > - int ret = 0;
> > +
> > + chan_cfg = &config->chan_config[ch->channel_id];
> > +
> > + if (i >= chan_cfg->output_count)
> > + return -EINVAL;
> >
> > if (common->started) {
> > vpif_err("Streaming in progress\n");
> > return -EBUSY;
> > }
> >
> > - ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video,
> > - s_routing, 0, i, 0);
> > -
> > - if (ret < 0)
> > - vpif_err("Failed to set output standard\n");
> > -
> > - ch->output_idx = i;
> > - if (vpif_obj.sd[i])
> > - ch->sd = vpif_obj.sd[i];
> > - return ret;
> > + return vpif_set_output(config, ch, i);
> > }
> >
> > static int vpif_g_output(struct file *file, void *priv, unsigned int *i)
> > @@ -1291,9 +1370,12 @@ vpif_enum_dv_timings(struct file *file, void *priv,
> > {
> > struct vpif_fh *fh = priv;
> > struct channel_obj *ch = fh->channel;
> > + int ret;
> >
> > - return v4l2_subdev_call(vpif_obj.sd[ch->output_idx],
> > - video, enum_dv_timings, timings);
> > + ret = v4l2_subdev_call(ch->sd, video, enum_dv_timings, timings);
> > + if (ret == -ENOIOCTLCMD && ret == -ENODEV)
> > + return -EINVAL;
> > + return ret;
> > }
> >
> > /**
> > @@ -1320,12 +1402,9 @@ static int vpif_s_dv_timings(struct file *file, void *priv,
> >
> > /* Configure subdevice timings, if any */
> > ret = v4l2_subdev_call(ch->sd, video, s_dv_timings, timings);
> > - if (ret == -ENOIOCTLCMD) {
> > - vpif_dbg(2, debug, "Custom DV timings not supported by "
> > - "subdevice\n");
> > - return -ENODATA;
> > - }
> > - if (ret < 0 && ret != -ENODEV) {
> > + if (ret == -ENOIOCTLCMD || ret == -ENODEV)
> > + ret = 0;
> > + if (ret < 0) {
> > vpif_dbg(2, debug, "Error setting custom DV timings\n");
> > return ret;
> > }
> > @@ -1754,6 +1833,11 @@ static __init int vpif_probe(struct platform_device *pdev)
> > ch->video_dev->lock = &common->lock;
> > video_set_drvdata(ch->video_dev, ch);
> >
> > + /* select output 0 */
> > + err = vpif_set_output(config, ch, 0);
> > + if (err)
> > + goto probe_out;
> > +
> > /* register video device */
> > vpif_dbg(1, debug, "channel=%x,channel->video_dev=%x\n",
> > (int)ch, (int)&ch->video_dev);
Regards,
Hans
More information about the linux-arm-kernel
mailing list