[PATCH 03/19] ARM: ux500: Pass SDI DMA information though AUX_DATA to MMCI
Lee Jones
lee.jones at linaro.org
Fri Sep 7 07:14:43 EDT 2012
There are four SDIs on the HREF, as opposed to the original two
enabled on Snowball. To get them working we have to pass their DMA
information in the same was as we need with the other two.
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
arch/arm/mach-ux500/board-mop500-sdi.c | 4 ++--
arch/arm/mach-ux500/board-mop500.c | 2 ++
arch/arm/mach-ux500/board-mop500.h | 2 ++
3 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 18ff781..9c8e4a9 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -152,7 +152,7 @@ static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
};
#endif
-static struct mmci_platform_data mop500_sdi1_data = {
+struct mmci_platform_data mop500_sdi1_data = {
.ocr_mask = MMC_VDD_29_30,
.f_max = 50000000,
.capabilities = MMC_CAP_4_BIT_DATA,
@@ -189,7 +189,7 @@ static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
};
#endif
-static struct mmci_platform_data mop500_sdi2_data = {
+struct mmci_platform_data mop500_sdi2_data = {
.ocr_mask = MMC_VDD_165_195,
.f_max = 50000000,
.capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 9d2d08e..9575150 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -754,6 +754,8 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
/* Requires DMA bindings. */
OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
/* Requires clock name bindings. */
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index a0f920d..1f86387 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -81,6 +81,8 @@
struct device;
struct i2c_board_info;
extern struct mmci_platform_data mop500_sdi0_data;
+extern struct mmci_platform_data mop500_sdi1_data;
+extern struct mmci_platform_data mop500_sdi2_data;
extern struct mmci_platform_data mop500_sdi4_data;
extern struct msp_i2s_platform_data msp0_platform_data;
extern struct msp_i2s_platform_data msp1_platform_data;
--
1.7.9.5
More information about the linux-arm-kernel
mailing list