[PATCH v2 1/8] ARM/dts: OMAP2: Add McBSP entries for OMAP2420 and OMAP2430 SoC

[Vaibhav Hiremath]

On 9/3/2012 8:16 PM, Benoit Cousson wrote:
> Hi Peter,
> 
> The overall series looks good to me, but I do have a couple of comments.
> 
> On 08/29/2012 03:31 PM, Peter Ujfalusi wrote:
>> The McBSP IP within OMAP2420 and 2430 is different we need to create separate
>> dtsi files for them.
>>
>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
>> ---
>>  arch/arm/boot/dts/omap2420.dtsi |   39 ++++++++++++++++++
>>  arch/arm/boot/dts/omap2430.dtsi |   83 +++++++++++++++++++++++++++++++++++++++
>>  2 files changed, 122 insertions(+), 0 deletions(-)
>>  create mode 100644 arch/arm/boot/dts/omap2420.dtsi
>>  create mode 100644 arch/arm/boot/dts/omap2430.dtsi
>>
>> diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
>> new file mode 100644
>> index 0000000..f375c68
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/omap2420.dtsi
>> @@ -0,0 +1,39 @@
>> +/*
>> + * Device Tree Source for OMAP2420 SoC
>> + *
>> + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
> 
> Nit: 2012
> 
>> + *
>> + * This file is licensed under the terms of the GNU General Public License
>> + * version 2.  This program is licensed "as is" without any warranty of any
>> + * kind, whether express or implied.
>> + */
>> +
>> +/include/ "omap2.dtsi"
>> +
>> +/ {
>> +	compatible = "ti,omap2420", "ti,omap2";
>> +
>> +	ocp {
>> +		mcbsp1: mcbsp at 48074000 {
>> +			compatible = "ti,omap2420-mcbsp";
>> +			reg = <0x48074000 0xff>;
>> +			reg-names = "mpu";
>> +			interrupts = <0 59 0x4>, /* TX interrupt */
>> +				     <0 60 0x4>; /* RX interrupt */
> 
> That one is not correct because it does comply with the interrupt
> controller specifier that require only one cell:
> 
> 		intc: interrupt-controller at 48200000 {
> 			compatible = "ti,omap2-intc";
> 			interrupt-controller;
> 			#interrupt-cells = <1>;
> ...
> 
> The one you are using is for GIC IRQ controller.
> It works probably because we are using hwmod so far :-)
> 

I think now we should kill the resource overwrite path, and should
respect and use resources passed from DT.

Benoit,
Did you get a chance to validate patch submitted towards this??

https://patchwork.kernel.org/patch/1384351/

Thanks,
Vaibhav
> Didn't you get some warning?
> 
> In the case of OMAP2 & 3, it is much simpler:
> 
>> +			interrupts = <59>, /* TX interrupt */
>> +				     <60>; /* RX interrupt */
> 
> That comment is applicable for OMAP2420, OMAP2430, and OMAP3 in general.
> 
>> +			interrupt-names = "tx", "rx";
>> +			interrupt-parent = <&intc>;
>> +			ti,hwmods = "mcbsp1";
>> +		};
>> +
>> +		mcbsp2: mcbsp at 48076000 {
>> +			compatible = "ti,omap2420-mcbsp";
>> +			reg = <0x48076000 0xff>;
>> +			reg-names = "mpu";
>> +			interrupts = <0 62 0x4>, /* TX interrupt */
>> +				     <0 63 0x4>; /* RX interrupt */
>> +			interrupt-names = "tx", "rx";
>> +			interrupt-parent = <&intc>;
>> +			ti,hwmods = "mcbsp2";
>> +		};
>> +	};
>> +};
>> diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
>> new file mode 100644
>> index 0000000..531e346
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/omap2430.dtsi
>> @@ -0,0 +1,83 @@
>> +/*
>> + * Device Tree Source for OMAP243x SoC
>> + *
>> + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
> 
> 2012.
> 
> Regards,
> Benoit
> 
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss
>