[PATCH] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA

[Gaëtan Carlier]

On 09/05/2012 05:29 PM, Fabio Estevam wrote:
> On Wed, Sep 5, 2012 at 12:03 PM, Gaëtan Carlier <gcembed at gmail.com> wrote:
>
>> With or without my patch ? I have burnt out my ov2640 while previous
>
> Without your patch. Just running a clean linux-next-20120905.
I also notice a difference between previous release. Before, if CMOS was 
not scanned on I2C, soc-camera failed to init.
With this release, soc-camera driver loads and create dev node even when 
nothing is connected on I2C bus.
>
>> experimentation so it is hard for me to test that and I have to write driver
>> for MT9V111 to be able to test soc-camera on Kernel 3.x.
>
> Write a driver? There is already one: drivers/media/i2c/mt9v011.c
MT9V011 is not compatible with MT9V111. MT9V111 uses two address spaces 
for register : Sensor Core registers and IFP registers. Another MT9* 
driver works with two address spaces but this is for a HD sensor and the 
function of registers is different.
>
> Regards,
>
> Fabio Estevam
>
Regards,
Gaëtan Carlier.