[PATCH V4 4/5] ARM: bcm2835: add stub clock driver

Stephen Warren swarren at wwwdotorg.org
Fri Sep 14 00:41:23 EDT 2012


From: Simon Arlott <simon at fire.lp0.eu>

This patch adds a minimal stub clock driver for the BCM2835. Its sole
purpose is to allow the PL011 AMBA clk_get() API calls to provide
something that looks enough like a clock that the driver probes and
operates correctly.

This patch was extracted from git://github.com/lp0/linux.git branch
rpi-split as of 2012/09/08, and modified as follows:

* s/bcm2708/bcm2835/.
* Modified device tree vendor prefix.
* Moved implementation to drivers/clk/.
* Modified .dev_id for UART clocks to match UART DT node names.

Signed-off-by: Chris Boot <bootc at bootc.net>
Signed-off-by: Simon Arlott <simon at fire.lp0.eu>
Signed-off-by: Dom Cobley <popcornmix at gmail.com>
Signed-off-by: Dom Cobley <dc4 at broadcom.com>
Cc: Mike Turquette <mturquette at linaro.org>
Signed-off-by: Stephen Warren <swarren at wwwdotorg.org>
--
v4:
* Moved implementation to drivers/clk/.
* s/bcm2708/bcm2835/.
* Updated for new device tree vendor prefix.
v3:
* New patch.
---
 arch/arm/mach-bcm2835/bcm2835.c |    3 +++
 drivers/clk/Makefile            |    1 +
 drivers/clk/clk-bcm2835.c       |   52 +++++++++++++++++++++++++++++++++++++++
 include/linux/clk/bcm2835.h     |   24 ++++++++++++++++++
 4 files changed, 80 insertions(+)
 create mode 100644 drivers/clk/clk-bcm2835.c
 create mode 100644 include/linux/clk/bcm2835.h

diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c
index e3f2968..f6fea49 100644
--- a/arch/arm/mach-bcm2835/bcm2835.c
+++ b/arch/arm/mach-bcm2835/bcm2835.c
@@ -16,6 +16,7 @@
 #include <linux/irqchip/bcm2835.h>
 #include <linux/of_platform.h>
 #include <linux/bcm2835_timer.h>
+#include <linux/clk/bcm2835.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -38,6 +39,8 @@ void __init bcm2835_init(void)
 {
 	int ret;
 
+	bcm2835_init_clocks();
+
 	ret = of_platform_populate(NULL, of_default_bus_match_table, NULL,
 				   NULL);
 	if (ret) {
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 6492651..f3e828c 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_CLKDEV_LOOKUP)	+= clkdev.o
 obj-$(CONFIG_COMMON_CLK)	+= clk.o clk-fixed-rate.o clk-gate.o \
 				   clk-mux.o clk-divider.o clk-fixed-factor.o
 # SoCs specific
+obj-$(CONFIG_ARCH_BCM2835)	+= clk-bcm2835.o
 obj-$(CONFIG_ARCH_NOMADIK)	+= clk-nomadik.o
 obj-$(CONFIG_ARCH_HIGHBANK)	+= clk-highbank.o
 obj-$(CONFIG_ARCH_MXS)		+= mxs/
diff --git a/drivers/clk/clk-bcm2835.c b/drivers/clk/clk-bcm2835.c
new file mode 100644
index 0000000..148ac35
--- /dev/null
+++ b/drivers/clk/clk-bcm2835.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-private.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/bcm2835.h>
+
+/*
+ * These are fixed clocks (and device tree doesn't support clk!).
+ *
+ * They're probably not all root clocks and it may be possible to
+ * turn them on and off but until this is mapped out better it's
+ * the only way they can be used.
+ */
+DEFINE_CLK_FIXED_RATE(sys_pclk,   CLK_IS_ROOT, 250000000, 0);
+DEFINE_CLK_FIXED_RATE(apb_pclk,   CLK_IS_ROOT, 126000000, 0);
+DEFINE_CLK_FIXED_RATE(uart0_pclk, CLK_IS_ROOT,   3000000, 0);
+DEFINE_CLK_FIXED_RATE(uart1_pclk, CLK_IS_ROOT, 125000000, 0);
+
+static struct clk_lookup lookups[] = {
+	{ .con_id = "sys_pclk", .clk = &sys_pclk },
+	{ .con_id = "apb_pclk", .clk = &apb_pclk },
+	{ .dev_id = "20201000.uart", .clk = &uart0_pclk },
+	{ .dev_id = "20215000.uart", .clk = &uart1_pclk }
+};
+
+void __init bcm2835_init_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++) {
+		__clk_init(NULL, lookups[i].clk);
+		clkdev_add(&lookups[i]);
+	}
+}
diff --git a/include/linux/clk/bcm2835.h b/include/linux/clk/bcm2835.h
new file mode 100644
index 0000000..aa937f6
--- /dev/null
+++ b/include/linux/clk/bcm2835.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_CLK_BCM2835_H_
+#define __LINUX_CLK_BCM2835_H_
+
+void __init bcm2835_init_clocks(void);
+
+#endif
-- 
1.7.9.5




More information about the linux-arm-kernel mailing list