[PATCH] mfd: Fix compile for twl-core.c by removing cpu_is_omap usage
Felipe Balbi
balbi at ti.com
Tue Sep 18 00:51:10 EDT 2012
On Mon, Sep 17, 2012 at 01:29:44PM -0700, Tony Lindgren wrote:
> Commit 7d7e1eba (ARM: OMAP2+: Prepare for irqs.h removal) broke
> compile for non-omap as include plat/cpu.h was added:
>
> drivers/mfd/twl-core.c:49:22: fatal error: plat/cpu.h: No such file or directory
>
> This header was indirectly included earlier when SPARSE_IRQ was not
> set, but does not exist on most platforms.
>
> Fix the problem by removing the cpu_is_omap usage that should
> not exist in drivers at all. We can do this by adding proper
> clock aliases for the twl-core.c drivers, and drop separate
> handling for cases when clock framework is not available as
> the behaviour will stay the same.
>
> Note that we need to add a platform device to avoid using the
> i2c provided names that may be different on various omaps.
>
> Reported-by: Fengguang Wu <fengguang.wu at intel.com>
> Reported-by: Stephen Rothwell <sfr at canb.auug.org.au>
> Cc: Paul Walmsley <paul at pwsan.com>
> Cc: Samuel Ortiz <sameo at linux.intel.com>
> Cc: Arnd Bergmann <arnd at arndb.de>
> Cc: Olof Johansson <olof at lixom.net>
> Signed-off-by: Tony Lindgren <tony at atomide.com>
FWIW:
Reviewed-by: Felipe Balbi <balbi at ti.com>
> ---
>
> Samuel, I'd like to queue this via arm-soc as that's where I have
> the breaking patch is if this patch is OK with you.
>
> --- a/arch/arm/mach-omap2/clock2430_data.c
> +++ b/arch/arm/mach-omap2/clock2430_data.c
> @@ -1856,6 +1856,7 @@ static struct omap_clk omap2430_clks[] = {
> CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X),
> CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X),
> CLK(NULL, "osc_ck", &osc_ck, CK_243X),
> + CLK("twl", "fck", &osc_ck, CK_243X),
> CLK(NULL, "sys_ck", &sys_ck, CK_243X),
> CLK(NULL, "alt_ck", &alt_ck, CK_243X),
> CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_243X),
> --- a/arch/arm/mach-omap2/clock3xxx_data.c
> +++ b/arch/arm/mach-omap2/clock3xxx_data.c
> @@ -3226,6 +3226,7 @@ static struct omap_clk omap3xxx_clks[] = {
> CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_3XXX),
> CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_3XXX),
> CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_3XXX),
> + CLK("twl", "fck", &osc_sys_ck, CK_3XXX),
> CLK(NULL, "sys_ck", &sys_ck, CK_3XXX),
> CLK(NULL, "sys_altclk", &sys_altclk, CK_3XXX),
> CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_3XXX),
> --- a/drivers/mfd/twl-core.c
> +++ b/drivers/mfd/twl-core.c
> @@ -46,8 +46,6 @@
> #include <linux/i2c.h>
> #include <linux/i2c/twl.h>
>
> -#include <plat/cpu.h>
> -
> #include "twl-core.h"
>
> /*
> @@ -1134,12 +1132,7 @@ static void clocks_init(struct device *dev,
> u32 rate;
> u8 ctrl = HFCLK_FREQ_26_MHZ;
>
> -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
> - if (cpu_is_omap2430())
> - osc = clk_get(dev, "osc_ck");
> - else
> - osc = clk_get(dev, "osc_sys_ck");
> -
> + osc = clk_get(dev, "fck");
> if (IS_ERR(osc)) {
> printk(KERN_WARNING "Skipping twl internal clock init and "
> "using bootloader value (unknown osc rate)\n");
> @@ -1149,18 +1142,6 @@ static void clocks_init(struct device *dev,
> rate = clk_get_rate(osc);
> clk_put(osc);
>
> -#else
> - /* REVISIT for non-OMAP systems, pass the clock rate from
> - * board init code, using platform_data.
> - */
> - osc = ERR_PTR(-EIO);
> -
> - printk(KERN_WARNING "Skipping twl internal clock init and "
> - "using bootloader value (unknown osc rate)\n");
> -
> - return;
> -#endif
> -
> switch (rate) {
> case 19200000:
> ctrl = HFCLK_FREQ_19p2_MHZ;
> @@ -1222,10 +1203,23 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
> {
> struct twl4030_platform_data *pdata = client->dev.platform_data;
> struct device_node *node = client->dev.of_node;
> + struct platform_device *pdev;
> int irq_base = 0;
> int status;
> unsigned i, num_slaves;
>
> + pdev = platform_device_alloc(DRIVER_NAME, -1);
> + if (!pdev) {
> + dev_err(&client->dev, "can't alloc pdev\n");
> + return -ENOMEM;
> + }
> +
> + status = platform_device_add(pdev);
> + if (status) {
> + platform_device_put(pdev);
> + return status;
> + }
> +
> if (node && !pdata) {
> /*
> * XXX: Temporary pdata until the information is correctly
> @@ -1234,23 +1228,30 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
> pdata = devm_kzalloc(&client->dev,
> sizeof(struct twl4030_platform_data),
> GFP_KERNEL);
> - if (!pdata)
> - return -ENOMEM;
> + if (!pdata) {
> + status = -ENOMEM;
> + goto free;
> + }
> }
>
> if (!pdata) {
> dev_dbg(&client->dev, "no platform data?\n");
> - return -EINVAL;
> + status = -EINVAL;
> + goto free;
> }
>
> + platform_set_drvdata(pdev, pdata);
> +
> if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) {
> dev_dbg(&client->dev, "can't talk I2C?\n");
> - return -EIO;
> + status = -EIO;
> + goto free;
> }
>
> if (inuse) {
> dev_dbg(&client->dev, "driver is already in use\n");
> - return -EBUSY;
> + status = -EBUSY;
> + goto free;
> }
>
> if ((id->driver_data) & TWL6030_CLASS) {
> @@ -1285,7 +1286,7 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
> inuse = true;
>
> /* setup clock framework */
> - clocks_init(&client->dev, pdata->clock);
> + clocks_init(&pdev->dev, pdata->clock);
>
> /* read TWL IDCODE Register */
> if (twl_id == TWL4030_CLASS_ID) {
> @@ -1335,6 +1336,9 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
> fail:
> if (status < 0)
> twl_remove(client);
> +free:
> + if (status < 0)
> + platform_device_unregister(pdev);
>
> return status;
> }
--
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120918/6a13f455/attachment.sig>
More information about the linux-arm-kernel
mailing list