[PATCH 1/2] video: Add support for the Solomon SSD1307 OLED Controller

[Maxime Ripard]

Hi Florian,


Le 20/09/2012 18:33, Maxime Ripard a écrit :
> This patch adds support for the Solomon SSD1307 OLED
> controller found on the Crystalfontz CFA10036 board.
> 
> This controller can drive a display with a resolution up
> to 128x39 and can operate over I2C or SPI.
> 
> The current driver has only been tested on the CFA-10036,
> that is using this controller over I2C to driver a 96x16
> OLED screen.
> 
> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> Cc: Brian Lilly <brian at crystalfontz.com>

Would you consider merging this patch or review it?
It has been around for quite some time now and has not received any
comments for at least the 2 last versions, so I guess there is not much
left holding it back (unless, of course, if you have some comments to
address), and I really would like to have it in 3.7.

Thanks,

Maxime



-- 
Maxime Ripard, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com