[PATCH 1/1] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots

[Linus Walleij]

On Mon, Aug 6, 2012 at 2:32 PM, Lee Jones <lee.jones at linaro.org> wrote:

> If we're booting with Device Tree enabled, we want the IRQ numbers to
> be taken and translated from the Device Tree binary. If not, they
> should be taken from the resource allocation defined in the AB8500 MFD
> core driver.
>
> Tested-by: Linus Walleij <linus.walleij at linaro.org>
> Signed-off-by: Lee Jones <lee.jones at linaro.org>

Not having this patch in v3.6-rcN gives the following boot noise (and
the key does not work):

------------[ cut here ]------------
WARNING: at /home/elinwal/linux-stericsson/kernel/irq/irqdomain.c:137
irq_domain_legacy_revmap+0x20/0x48()
Modules linked in:
[<c0014710>] (unwind_backtrace+0x0/0xf8) from [<c001d37c>]
(warn_slowpath_common+0x4c/0x64)
[<c001d37c>] (warn_slowpath_common+0x4c/0x64) from [<c001d3b0>]
(warn_slowpath_null+0x1c/0x24)
[<c001d3b0>] (warn_slowpath_null+0x1c/0x24) from [<c0064200>]
(irq_domain_legacy_revmap+0x20/0x48)
[<c0064200>] (irq_domain_legacy_revmap+0x20/0x48) from [<c02cea28>]
(ab8500_ponkey_probe+0xd0/0x1f8)
[<c02cea28>] (ab8500_ponkey_probe+0xd0/0x1f8) from [<c01a1e20>]
(platform_drv_probe+0x14/0x18)
[<c01a1e20>] (platform_drv_probe+0x14/0x18) from [<c01a0be4>]
(driver_probe_device+0x78/0x208)
[<c01a0be4>] (driver_probe_device+0x78/0x208) from [<c01a0e00>]
(__driver_attach+0x8c/0x90)
[<c01a0e00>] (__driver_attach+0x8c/0x90) from [<c019f514>]
(bus_for_each_dev+0x50/0x7c)
[<c019f514>] (bus_for_each_dev+0x50/0x7c) from [<c01a0424>]
(bus_add_driver+0x170/0x23c)
[<c01a0424>] (bus_add_driver+0x170/0x23c) from [<c01a12b4>]
(driver_register+0x78/0x144)
[<c01a12b4>] (driver_register+0x78/0x144) from [<c0008598>]
(do_one_initcall+0x34/0x174)
[<c0008598>] (do_one_initcall+0x34/0x174) from [<c03df8e8>]
(kernel_init+0xfc/0x1bc)
[<c03df8e8>] (kernel_init+0xfc/0x1bc) from [<c000f1d4>]
(kernel_thread_exit+0x0/0x8)
---[ end trace d77aa0db848f0e28 ]---
ab8500-core ab8500-core.0: Failed to request dbf IRQ#0: -22
ab8500-poweron-key: probe of ab8500-poweron-key.0 failed with error -22

So how do we proceed to not release v3.6 with this regression?

Shall all of the MFD IRQdomain stuff be pulled into the -rc series?

(Linux-next seems to be working, so the real fix is in there)

Yours,
Linus Walleij