[PATCH 0/2] ARM: omap/dts: Add support for Gumstix Overo with Tobi expansion

[Tony Lindgren]

* Florian Vaussard <florian.vaussard at epfl.ch> [120831 09:07]:
> The Gumstix Overo is a computer on module using an OMAP3 processor.
> This module must be plugged into an expansion board.
> 
> This patchset adds a first device tree support for the Overo, using the
> Tobi expansion board. The current support is able to boot and mount
> the rootfs from MMC, with a few extra features.
> 
> The first patch creates the device tree for both the Overo and the
> Tobi expansion board, and updates the dtb build target.
> 
> The second patch updates the omap/dts documentation.
> 
> This patchset applies on tony's tree [1], devel-dt branch.

Great, I'm assuming Benoit will pick this up as well.

Regards,

Tony
 
> Regards,
> 
> Florian
> 
> [1] http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap.git;a=summary
> 
> 
> Florian Vaussard (2):
>   ARM: omap/dts: Add support for Gumstix Overo with Tobi expansion
>     board
>   ARM: omap/dts: update the documentation
> 
>  .../devicetree/bindings/arm/omap/omap.txt          |    3 +
>  arch/arm/boot/dts/omap3-overo.dtsi                 |   42 ++++++++++++++++++++
>  arch/arm/boot/dts/omap3-tobi.dts                   |   35 ++++++++++++++++
>  arch/arm/mach-omap2/Makefile.boot                  |    2 +-
>  4 files changed, 81 insertions(+), 1 deletions(-)
>  create mode 100644 arch/arm/boot/dts/omap3-overo.dtsi
>  create mode 100644 arch/arm/boot/dts/omap3-tobi.dts
> 
> -- 
> 1.7.5.4
>