[PATCH v9 10/13] ARM: SoC: convert imx6q to SoC descriptor
Shawn Guo
shawn.guo at linaro.org
Wed Sep 12 21:17:46 EDT 2012
On Wed, Sep 12, 2012 at 04:58:23PM +0200, Arnd Bergmann wrote:
> From: Marc Zyngier <marc.zyngier at arm.com>
>
> Convert the imx6q platform to use the SoC descriptor to provide
> its SMP and CPU hotplug operations.
>
> Cc: Shawn Guo <shawn.guo at linaro.org>
> Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
> Signed-off-by: Arnd Bergmann <arnd at arndb.de>
> ---
> arch/arm/mach-imx/hotplug.c | 16 +---------------
> arch/arm/mach-imx/mach-imx6q.c | 1 +
> arch/arm/mach-imx/platsmp.c | 18 ++++++++++++++----
> arch/arm/plat-mxc/include/mach/common.h | 4 ++++
> 4 files changed, 20 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
> index f8f7437..b07b778 100644
> --- a/arch/arm/mach-imx/hotplug.c
> +++ b/arch/arm/mach-imx/hotplug.c
> @@ -15,11 +15,6 @@
> #include <asm/cp15.h>
> #include <mach/common.h>
>
> -int platform_cpu_kill(unsigned int cpu)
> -{
> - return 1;
> -}
> -
> static inline void cpu_enter_lowpower(void)
> {
> unsigned int v;
> @@ -47,7 +42,7 @@ static inline void cpu_enter_lowpower(void)
> *
> * Called with IRQs disabled
> */
> -void platform_cpu_die(unsigned int cpu)
> +void imx_cpu_die(unsigned int cpu)
> {
> cpu_enter_lowpower();
> imx_enable_cpu(cpu, false);
> @@ -56,12 +51,3 @@ void platform_cpu_die(unsigned int cpu)
> while (1)
> ;
> }
> -
> -int platform_cpu_disable(unsigned int cpu)
> -{
> - /*
> - * we don't allow CPU 0 to be shutdown (it is still too special
> - * e.g. clock tick interrupts)
> - */
> - return cpu == 0 ? -EPERM : 0;
> -}
> diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
> index 045b3f6..ef0b52f 100644
> --- a/arch/arm/mach-imx/mach-imx6q.c
> +++ b/arch/arm/mach-imx/mach-imx6q.c
> @@ -226,6 +226,7 @@ static const char *imx6q_dt_compat[] __initdata = {
> };
>
> DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
> + .smp = smp_ops(imx6q_soc_desc),
s/imx6q_soc_desc/imx_smp_ops
Otherwise,
Acked-by: Shawn Guo <shawn.guo at linaro.org>
Regards,
Shawn
> .map_io = imx6q_map_io,
> .init_irq = imx6q_init_irq,
> .handle_irq = imx6q_handle_irq,
> diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
> index ab98c6f..2ac43e1 100644
> --- a/arch/arm/mach-imx/platsmp.c
> +++ b/arch/arm/mach-imx/platsmp.c
> @@ -41,7 +41,7 @@ void __init imx_scu_map_io(void)
> scu_base = IMX_IO_ADDRESS(base);
> }
>
> -void __cpuinit platform_secondary_init(unsigned int cpu)
> +static void __cpuinit imx_secondary_init(unsigned int cpu)
> {
> /*
> * if any interrupts are already enabled for the primary
> @@ -51,7 +51,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
> gic_secondary_init(0);
> }
>
> -int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
> +static int __cpuinit imx_boot_secondary(unsigned int cpu, struct task_struct *idle)
> {
> imx_set_cpu_jump(cpu, v7_secondary_startup);
> imx_enable_cpu(cpu, true);
> @@ -62,7 +62,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
> * Initialise the CPU possible map early - this describes the CPUs
> * which may be present or become present in the system.
> */
> -void __init smp_init_cpus(void)
> +static void __init imx_smp_init_cpus(void)
> {
> int i, ncores;
>
> @@ -79,7 +79,17 @@ void imx_smp_prepare(void)
> scu_enable(scu_base);
> }
>
> -void __init platform_smp_prepare_cpus(unsigned int max_cpus)
> +static void __init imx_smp_prepare_cpus(unsigned int max_cpus)
> {
> imx_smp_prepare();
> }
> +
> +struct smp_operations imx_smp_ops __initdata = {
> + .smp_init_cpus = imx_smp_init_cpus,
> + .smp_prepare_cpus = imx_smp_prepare_cpus,
> + .smp_secondary_init = imx_secondary_init,
> + .smp_boot_secondary = imx_boot_secondary,
> +#ifdef CONFIG_HOTPLUG_CPU
> + .cpu_die = imx_cpu_die,
> +#endif
> +};
> diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
> index 7128e97..e8b5150 100644
> --- a/arch/arm/plat-mxc/include/mach/common.h
> +++ b/arch/arm/plat-mxc/include/mach/common.h
> @@ -145,6 +145,8 @@ extern void imx53_smd_common_init(void);
> extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
> extern void imx6q_clock_map_io(void);
>
> +extern void imx_cpu_die(unsigned int cpu);
> +
> #ifdef CONFIG_PM
> extern void imx6q_pm_init(void);
> extern void imx51_pm_init(void);
> @@ -161,4 +163,6 @@ extern int mx51_neon_fixup(void);
> static inline int mx51_neon_fixup(void) { return 0; }
> #endif
>
> +extern struct smp_operations imx_smp_ops;
> +
> #endif
> --
> 1.7.10
>
More information about the linux-arm-kernel
mailing list