[PATCH v2 08/13] mfd: Versatile Express system registers driver
Pawel Moll
pawel.moll at arm.com
Tue Sep 18 10:17:50 EDT 2012
This is a platform driver for Versatile Express' "system
register" block. It's a random collection of registers providing
the following functionality:
- low level platform functions like board ID access; in order to
use those, the driver must be initialized early, either statically
or based on the DT
- config bus bridge via "system control" interface; as the response
from the controller does not generate interrupt (yet), the status
register is periodically polled using a timer
- pseudo GPIO lines providing MMC card status and Flash WP#
signal control
- LED interface for a set of 8 LEDs on the motherboard, with
"heartbeat" and "mmc0" as default triggers for 2 of them
Signed-off-by: Pawel Moll <pawel.moll at arm.com>
---
.../devicetree/bindings/arm/vexpress-sysreg.txt | 50 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/vexpress-sysreg.c | 542 ++++++++++++++++++++
include/linux/vexpress.h | 25 +
4 files changed, 618 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
create mode 100644 drivers/mfd/vexpress-sysreg.c
diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
new file mode 100644
index 0000000..9cf3f25
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
@@ -0,0 +1,50 @@
+ARM Versatile Express system registers
+--------------------------------------
+
+This is a system control registers block, providing multiple low level
+platform functions like board detection and identification, software
+interrupt generation, MMC and NOR Flash control etc.
+
+Required node properties:
+- compatible value : = "arm,vexpress,sysreg";
+- reg : physical base address and the size of the registers window
+- gpio-controller : specifies that the node is a GPIO controller
+- #gpio-cells : size of the GPIO specifier, should be 2:
+ - first cell is the pseudo-GPIO line number:
+ 0 - MMC CARDIN
+ 1 - MMC WPROT
+ 2 - NOR FLASH WPn
+ - second cell can take standard GPIO flags (currently ignored).
+
+Example:
+ v2m_sysreg: sysreg at 10000000 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x10000000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+This block also can also act a bridge to the platform's configuration
+bus via "system control" interface, addressing devices with site number,
+position in the board stack, config controller, function and device
+numbers - see motherboard's TRM for more details.
+
+The node describing a config device must refer to the sysreg node via
+"arm,vexpress,config-bridge" phandle (can be also defined in the node's
+parent) and relies on the board topology properties - see main vexpress
+node documentation for more details. It must must also define the
+following property:
+- arm,vexpress-sysreg,func : must contain two cells:
+ - first cell defines function number (eg. 1 for clock generator,
+ 2 for voltage regulators etc.)
+ - device number (eg. osc 0, osc 1 etc.)
+
+Example:
+ mcc {
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ osc at 0 {
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 0>;
+ };
+ };
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 79dd22d..6b3f9f9 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -132,3 +132,4 @@ obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
obj-$(CONFIG_MFD_SEC_CORE) += sec-core.o sec-irq.o
obj-$(CONFIG_MFD_ANATOP) += anatop-mfd.o
obj-$(CONFIG_MFD_LM3533) += lm3533-core.o lm3533-ctrlbank.o
+obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-sysreg.o
diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c
new file mode 100644
index 0000000..d33dcf3
--- /dev/null
+++ b/drivers/mfd/vexpress-sysreg.c
@@ -0,0 +1,542 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2012 ARM Limited
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/timer.h>
+#include <linux/vexpress.h>
+
+#define SYS_ID 0x000
+#define SYS_SW 0x004
+#define SYS_LED 0x008
+#define SYS_100HZ 0x024
+#define SYS_FLAGS 0x030
+#define SYS_FLAGSSET 0x030
+#define SYS_FLAGSCLR 0x034
+#define SYS_NVFLAGS 0x038
+#define SYS_NVFLAGSSET 0x038
+#define SYS_NVFLAGSCLR 0x03c
+#define SYS_MCI 0x048
+#define SYS_FLASH 0x04c
+#define SYS_CFGSW 0x058
+#define SYS_24MHZ 0x05c
+#define SYS_MISC 0x060
+#define SYS_DMA 0x064
+#define SYS_PROCID0 0x084
+#define SYS_PROCID1 0x088
+#define SYS_CFGDATA 0x0a0
+#define SYS_CFGCTRL 0x0a4
+#define SYS_CFGSTAT 0x0a8
+
+#define SYS_HBI_MASK 0xfff
+#define SYS_ID_HBI_SHIFT 16
+#define SYS_PROCIDx_HBI_SHIFT 0
+
+#define SYS_MCI_CARDIN (1 << 0)
+#define SYS_MCI_WPROT (1 << 1)
+
+#define SYS_FLASH_WPn (1 << 0)
+
+#define SYS_MISC_MASTERSITE (1 << 14)
+
+#define SYS_CFGCTRL_START (1 << 31)
+#define SYS_CFGCTRL_WRITE (1 << 30)
+#define SYS_CFGCTRL_DCC(n) (((n) & 0xf) << 26)
+#define SYS_CFGCTRL_FUNC(n) (((n) & 0x3f) << 20)
+#define SYS_CFGCTRL_SITE(n) (((n) & 0x3) << 16)
+#define SYS_CFGCTRL_POSITION(n) (((n) & 0xf) << 12)
+#define SYS_CFGCTRL_DEVICE(n) (((n) & 0xfff) << 0)
+
+#define SYS_CFGSTAT_ERR (1 << 1)
+#define SYS_CFGSTAT_COMPLETE (1 << 0)
+
+
+static void __iomem *vexpress_sysreg_base;
+static struct device *vexpress_sysreg_dev;
+static int vexpress_master_site;
+
+
+void vexpress_flags_set(u32 data)
+{
+ writel(~0, vexpress_sysreg_base + SYS_FLAGSCLR);
+ writel(data, vexpress_sysreg_base + SYS_FLAGSSET);
+}
+
+u32 vexpress_get_procid(int site)
+{
+ if (site == VEXPRESS_SITE_MASTER)
+ site = vexpress_master_site;
+
+ return readl(vexpress_sysreg_base + (site == VEXPRESS_SITE_DB1 ?
+ SYS_PROCID0 : SYS_PROCID1));
+}
+
+u32 vexpress_get_hbi(int site)
+{
+ u32 id;
+
+ switch (site) {
+ case VEXPRESS_SITE_MB:
+ id = readl(vexpress_sysreg_base + SYS_ID);
+ return (id >> SYS_ID_HBI_SHIFT) & SYS_HBI_MASK;
+ case VEXPRESS_SITE_MASTER:
+ case VEXPRESS_SITE_DB1:
+ case VEXPRESS_SITE_DB2:
+ id = vexpress_get_procid(site);
+ return (id >> SYS_PROCIDx_HBI_SHIFT) & SYS_HBI_MASK;
+ }
+
+ return ~0;
+}
+
+void __iomem *vexpress_get_24mhz_clock_base(void)
+{
+ return vexpress_sysreg_base + SYS_24MHZ;
+}
+
+
+static void vexpress_sysreg_find_prop(struct device_node *node,
+ const char *name, u32 *val)
+{
+ of_node_get(node);
+ while (node) {
+ if (of_property_read_u32(node, name, val) == 0) {
+ of_node_put(node);
+ return;
+ }
+ node = of_get_next_parent(node);
+ }
+}
+
+unsigned __vexpress_get_site(struct device *dev, struct device_node *node)
+{
+ u32 site = 0;
+
+ WARN_ON(dev && node && dev->of_node != node);
+ if (dev && !node)
+ node = dev->of_node;
+
+ if (node) {
+ vexpress_sysreg_find_prop(node, "arm,vexpress,site", &site);
+ } else if (dev && dev->bus == &platform_bus_type) {
+ struct platform_device *pdev = to_platform_device(dev);
+
+ if (pdev->num_resources == 1 &&
+ pdev->resource[0].flags == IORESOURCE_BUS)
+ site = pdev->resource[0].start;
+ } else if (dev && strncmp(dev_name(dev), "ct:", 3) == 0) {
+ site = VEXPRESS_SITE_MASTER;
+ }
+
+ if (site == VEXPRESS_SITE_MASTER)
+ site = vexpress_master_site;
+
+ return site;
+}
+
+
+struct vexpress_sysreg_config_func {
+ u32 template;
+ u32 device;
+};
+
+static struct vexpress_config_bridge *vexpress_sysreg_config_bridge;
+static struct timer_list vexpress_sysreg_config_timer;
+static u32 *vexpress_sysreg_config_data;
+static int vexpress_sysreg_config_tries;
+
+static void *vexpress_sysreg_config_func_get(struct device *dev,
+ struct device_node *node)
+{
+ struct vexpress_sysreg_config_func *config_func;
+ u32 site;
+ u32 position = 0;
+ u32 dcc = 0;
+ u32 func_device[2];
+ int err = -EFAULT;
+
+ if (node) {
+ of_node_get(node);
+ vexpress_sysreg_find_prop(node, "arm,vexpress,site", &site);
+ vexpress_sysreg_find_prop(node, "arm,vexpress,position",
+ &position);
+ vexpress_sysreg_find_prop(node, "arm,vexpress,dcc", &dcc);
+ err = of_property_read_u32_array(node,
+ "arm,vexpress-sysreg,func", func_device,
+ ARRAY_SIZE(func_device));
+ of_node_put(node);
+ } else if (dev && dev->bus == &platform_bus_type) {
+ struct platform_device *pdev = to_platform_device(dev);
+
+ if (pdev->num_resources == 1 &&
+ pdev->resource[0].flags == IORESOURCE_BUS) {
+ site = pdev->resource[0].start;
+ func_device[0] = pdev->resource[0].end;
+ func_device[1] = pdev->id;
+ err = 0;
+ }
+ }
+ if (err)
+ return NULL;
+
+ config_func = kzalloc(sizeof(*config_func), GFP_KERNEL);
+ if (!config_func)
+ return NULL;
+
+ config_func->template = SYS_CFGCTRL_DCC(dcc);
+ config_func->template |= SYS_CFGCTRL_FUNC(func_device[0]);
+ config_func->template |= SYS_CFGCTRL_SITE(site == VEXPRESS_SITE_MASTER ?
+ vexpress_master_site : site);
+ config_func->template |= SYS_CFGCTRL_POSITION(position);
+ config_func->device |= func_device[1];
+
+ dev_dbg(vexpress_sysreg_dev, "func 0x%p = 0x%x, %d\n", config_func,
+ config_func->template, config_func->device);
+
+ return config_func;
+}
+
+static void vexpress_sysreg_config_func_put(void *func)
+{
+ kfree(func);
+}
+
+static int vexpress_sysreg_config_func_exec(void *func, int offset,
+ bool write, u32 *data)
+{
+ int res;
+ struct vexpress_sysreg_config_func *config_func = func;
+ u32 command;
+
+ if (WARN_ON(!vexpress_sysreg_base))
+ return -ENOENT;
+
+ command = readl(vexpress_sysreg_base + SYS_CFGCTRL);
+ if (WARN_ON(command & SYS_CFGCTRL_START))
+ return -EBUSY;
+
+ command = SYS_CFGCTRL_START;
+ command |= write ? SYS_CFGCTRL_WRITE : 0;
+ command |= config_func->template;
+ command |= SYS_CFGCTRL_DEVICE(config_func->device + offset);
+
+ if (write) {
+ dev_dbg(vexpress_sysreg_dev, "write cmd %x, data %x\n",
+ command, *data);
+ writel(*data, vexpress_sysreg_base + SYS_CFGDATA);
+ } else {
+ dev_dbg(vexpress_sysreg_dev, "read cmd %x\n", command);
+ vexpress_sysreg_config_data = data;
+ }
+ writel(0, vexpress_sysreg_base + SYS_CFGSTAT);
+ writel(command, vexpress_sysreg_base + SYS_CFGCTRL);
+ mb();
+
+ if (vexpress_sysreg_dev) {
+ /* Schedule completion check */
+ vexpress_sysreg_config_tries = 100;
+ mod_timer(&vexpress_sysreg_config_timer,
+ jiffies + usecs_to_jiffies(100));
+ res = VEXPRESS_CONFIG_EXEC_WAIT;
+ } else {
+ /* Early execution, no timer available, have to spin */
+ u32 stat;
+
+ do {
+ cpu_relax();
+ stat = readl(vexpress_sysreg_base + SYS_CFGSTAT);
+ } while (!stat);
+
+ if (!write && (stat & SYS_CFGSTAT_COMPLETE))
+ *data = readl(vexpress_sysreg_base + SYS_CFGDATA);
+ res = VEXPRESS_CONFIG_EXEC_DONE;
+
+ if (stat & SYS_CFGSTAT_ERR)
+ res = -EINVAL;
+ }
+
+ return res;
+}
+
+struct vexpress_config_bridge_info vexpress_sysreg_config_bridge_info = {
+ .name = "vexpress-sysreg",
+ .func_get = vexpress_sysreg_config_func_get,
+ .func_put = vexpress_sysreg_config_func_put,
+ .func_exec = vexpress_sysreg_config_func_exec,
+};
+
+static void vexpress_sysreg_config_complete(unsigned long data)
+{
+ int err = 0;
+ u32 stat = readl(vexpress_sysreg_base + SYS_CFGSTAT);
+
+ if (stat & SYS_CFGSTAT_ERR)
+ err = -EINVAL;
+ if (!vexpress_sysreg_config_tries--)
+ err = -ETIMEDOUT;
+
+ if (err)
+ dev_err(vexpress_sysreg_dev, "error %d\n", err);
+
+ if (!err && !(stat & SYS_CFGSTAT_COMPLETE)) {
+ mod_timer(&vexpress_sysreg_config_timer,
+ jiffies + usecs_to_jiffies(50));
+ return;
+ }
+
+ if (vexpress_sysreg_config_data) {
+ *vexpress_sysreg_config_data = readl(vexpress_sysreg_base +
+ SYS_CFGDATA);
+ dev_dbg(vexpress_sysreg_dev, "read data %x\n",
+ *vexpress_sysreg_config_data);
+ vexpress_sysreg_config_data = NULL;
+ }
+
+ vexpress_config_complete(vexpress_sysreg_config_bridge, err);
+}
+
+
+void __init vexpress_sysreg_early_init(void __iomem *base)
+{
+ struct device_node *node = of_find_compatible_node(NULL, NULL,
+ "arm,vexpress-sysreg");
+
+ if (node)
+ base = of_iomap(node, 0);
+
+ if (WARN_ON(!base))
+ return;
+
+ vexpress_sysreg_base = base;
+
+ if (readl(vexpress_sysreg_base + SYS_MISC) & SYS_MISC_MASTERSITE)
+ vexpress_master_site = VEXPRESS_SITE_DB2;
+ else
+ vexpress_master_site = VEXPRESS_SITE_DB1;
+
+ vexpress_sysreg_config_bridge = vexpress_config_bridge_register(
+ node, &vexpress_sysreg_config_bridge_info);
+ WARN_ON(!vexpress_sysreg_config_bridge);
+}
+
+void __init vexpress_sysreg_of_early_init(void)
+{
+ vexpress_sysreg_early_init(NULL);
+}
+
+
+static struct vexpress_sysreg_gpio {
+ unsigned long reg;
+ u32 value;
+} vexpress_sysreg_gpios[] = {
+ [VEXPRESS_GPIO_MMC_CARDIN] = {
+ .reg = SYS_MCI,
+ .value = SYS_MCI_CARDIN,
+ },
+ [VEXPRESS_GPIO_MMC_WPROT] = {
+ .reg = SYS_MCI,
+ .value = SYS_MCI_WPROT,
+ },
+ [VEXPRESS_GPIO_FLASH_WPn] = {
+ .reg = SYS_FLASH,
+ .value = SYS_FLASH_WPn,
+ },
+};
+
+static int vexpress_sysreg_gpio_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ return 0;
+}
+
+static int vexpress_sysreg_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ return 0;
+}
+
+static int vexpress_sysreg_gpio_get(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct vexpress_sysreg_gpio *gpio = &vexpress_sysreg_gpios[offset];
+ u32 reg_value = readl(vexpress_sysreg_base + gpio->reg);
+
+ return !!(reg_value & gpio->value);
+}
+
+static void vexpress_sysreg_gpio_set(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct vexpress_sysreg_gpio *gpio = &vexpress_sysreg_gpios[offset];
+ u32 reg_value = readl(vexpress_sysreg_base + gpio->reg);
+
+ if (value)
+ reg_value |= gpio->value;
+ else
+ reg_value &= ~gpio->value;
+
+ writel(reg_value, vexpress_sysreg_base + gpio->reg);
+}
+
+static struct gpio_chip vexpress_sysreg_gpio_chip = {
+ .label = "vexpress-sysreg",
+ .direction_input = vexpress_sysreg_gpio_direction_input,
+ .direction_output = vexpress_sysreg_gpio_direction_output,
+ .get = vexpress_sysreg_gpio_get,
+ .set = vexpress_sysreg_gpio_set,
+ .ngpio = ARRAY_SIZE(vexpress_sysreg_gpios),
+ .base = 0,
+};
+
+
+static ssize_t vexpress_sysreg_sys_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "0x%08x\n", readl(vexpress_sysreg_base + SYS_ID));
+}
+
+DEVICE_ATTR(sys_id, S_IRUGO, vexpress_sysreg_sys_id_show, NULL);
+
+static int __devinit vexpress_sysreg_probe(struct platform_device *pdev)
+{
+ int err;
+ struct resource *res = platform_get_resource(pdev,
+ IORESOURCE_MEM, 0);
+
+ if (!devm_request_mem_region(&pdev->dev, res->start,
+ resource_size(res), pdev->name)) {
+ dev_err(&pdev->dev, "Failed to request memory region!\n");
+ return -EBUSY;
+ }
+
+ if (!vexpress_sysreg_base)
+ vexpress_sysreg_base = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+
+ if (!vexpress_sysreg_base) {
+ dev_err(&pdev->dev, "Failed to obtain base address!\n");
+ return -EFAULT;
+ }
+
+ setup_timer(&vexpress_sysreg_config_timer,
+ vexpress_sysreg_config_complete, 0);
+
+ vexpress_sysreg_gpio_chip.dev = &pdev->dev;
+ err = gpiochip_add(&vexpress_sysreg_gpio_chip);
+ if (err) {
+ vexpress_config_bridge_unregister(
+ vexpress_sysreg_config_bridge);
+ dev_err(&pdev->dev, "Failed to register GPIO chip! (%d)\n",
+ err);
+ return err;
+ }
+
+ vexpress_sysreg_dev = &pdev->dev;
+
+ device_create_file(vexpress_sysreg_dev, &dev_attr_sys_id);
+
+ return 0;
+}
+
+static const struct of_device_id vexpress_sysreg_match[] = {
+ { .compatible = "arm,vexpress-sysreg", },
+ {},
+};
+
+static struct platform_driver vexpress_sysreg_driver = {
+ .driver = {
+ .name = "vexpress-sysreg",
+ .of_match_table = vexpress_sysreg_match,
+ },
+ .probe = vexpress_sysreg_probe,
+};
+
+static int __init vexpress_sysreg_init(void)
+{
+ return platform_driver_register(&vexpress_sysreg_driver);
+}
+core_initcall(vexpress_sysreg_init);
+
+
+struct vexpress_sysreg_led {
+ u32 mask;
+ struct led_classdev cdev;
+} vexpress_sysreg_leds[] = {
+ { .mask = 1 << 0, .cdev.name = "v2m:green:user1",
+ .cdev.default_trigger = "heartbeat", },
+ { .mask = 1 << 1, .cdev.name = "v2m:green:user2",
+ .cdev.default_trigger = "mmc0", },
+ { .mask = 1 << 2, .cdev.name = "v2m:green:user3", },
+ { .mask = 1 << 3, .cdev.name = "v2m:green:user4", },
+ { .mask = 1 << 4, .cdev.name = "v2m:green:user5", },
+ { .mask = 1 << 5, .cdev.name = "v2m:green:user6", },
+ { .mask = 1 << 6, .cdev.name = "v2m:green:user7", },
+ { .mask = 1 << 7, .cdev.name = "v2m:green:user8", },
+};
+
+static DEFINE_SPINLOCK(vexpress_sysreg_leds_lock);
+
+static void vexpress_sysreg_led_brightness_set(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct vexpress_sysreg_led *led = container_of(cdev,
+ struct vexpress_sysreg_led, cdev);
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&vexpress_sysreg_leds_lock, flags);
+
+ val = readl(vexpress_sysreg_base + SYS_LED);
+ if (brightness == LED_OFF)
+ val &= ~led->mask;
+ else
+ val |= led->mask;
+ writel(val, vexpress_sysreg_base + SYS_LED);
+
+ spin_unlock_irqrestore(&vexpress_sysreg_leds_lock, flags);
+}
+
+static int __init vexpress_sysreg_init_leds(void)
+{
+ struct vexpress_sysreg_led *led;
+ int i;
+
+ /* Clear all user LEDs */
+ writel(0, vexpress_sysreg_base + SYS_LED);
+
+ for (i = 0, led = vexpress_sysreg_leds;
+ i < ARRAY_SIZE(vexpress_sysreg_leds); i++, led++) {
+ int err;
+
+ led->cdev.brightness_set = vexpress_sysreg_led_brightness_set;
+ err = led_classdev_register(vexpress_sysreg_dev, &led->cdev);
+ if (err) {
+ dev_err(vexpress_sysreg_dev,
+ "Failed to register LED %d! (%d)\n",
+ i, err);
+ while (led--, i--)
+ led_classdev_unregister(&led->cdev);
+ return err;
+ }
+ }
+
+ return 0;
+}
+device_initcall(vexpress_sysreg_init_leds);
diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h
index b4acb20..8ed285c 100644
--- a/include/linux/vexpress.h
+++ b/include/linux/vexpress.h
@@ -24,6 +24,17 @@
#define VEXPRESS_CONFIG_EXEC_DONE 0
#define VEXPRESS_CONFIG_EXEC_WAIT 1
+#define VEXPRESS_GPIO_MMC_CARDIN 0
+#define VEXPRESS_GPIO_MMC_WPROT 1
+#define VEXPRESS_GPIO_FLASH_WPn 2
+
+#define VEXPRESS_RES_FUNC(_site, _func) \
+{ \
+ .start = (_site), \
+ .end = (_func), \
+ .flags = IORESOURCE_BUS, \
+}
+
/* Config bridge API */
struct vexpress_config_bridge_info {
@@ -61,4 +72,18 @@ int vexpress_config_read(struct vexpress_config_func *func, int offset,
int vexpress_config_write(struct vexpress_config_func *func, int offset,
u32 data);
+/* Platform control */
+
+u32 vexpress_get_procid(int site);
+u32 vexpress_get_hbi(int site);
+void *vexpress_get_24mhz_clock_base(void);
+void vexpress_flags_set(u32 data);
+
+#define vexpress_get_site_by_node(node) __vexpress_get_site(NULL, node)
+#define vexpress_get_site_by_dev(dev) __vexpress_get_site(dev, NULL)
+unsigned __vexpress_get_site(struct device *dev, struct device_node *node);
+
+void vexpress_sysreg_early_init(void __iomem *base);
+void vexpress_sysreg_of_early_init(void);
+
#endif
--
1.7.9.5
More information about the linux-arm-kernel
mailing list