February 2012 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Wed Feb 1 00:36:22 EST 2012
Ending: Wed Feb 29 23:55:43 EST 2012
Messages: 4407

• [PATCH v4 1/2] mfd: Add anatop mfd driver   Ying-Chun Liu (PaulLiu)
• [PATCH v4 2/2] Regulator: Add Anatop regulator driver   Ying-Chun Liu (PaulLiu)
• [PATCH 1/2] ARM: ixp4xx: fix compilation, add gpiolib support   Arnaud Patard (Rtp)
• [BUG] genirq: Race condition in ONESHOT IRQ handler disabling IRQ forever   =?utf-8?Q?Lothar_Wa=C3=9Fmann?=
• [PATCH] gpio: samsung: adapt to changes in gpio specifier translator function declaration   Thomas Abraham
• An extremely simplified pinctrl bindings proposal   Thomas Abraham
• [PATCH] ARM: Exynos: Add irq domain and device tree support for interrupt combiner   Thomas Abraham
• [PATCH] ARM: EXYNOS: Adds Samsung TRATS board support   Thomas Abraham
• [PATCH] ARM: EXYNOS: Adds Samsung TRATS board support   Thomas Abraham
• [PATCH v4 0/2] ARM: Exynos: Add irq_domain and device tree support for combiner   Thomas Abraham
• [PATCH v4 1/2] ARM: Exynos: Add irq_domain support for interrupt combiner   Thomas Abraham
• [PATCH v4 2/2] ARM: Exynos: Add device tree support for interrupt combiner   Thomas Abraham
• Subject: [PATCH] MAINTAINERS: add maintainer entry for SAMSUNG EXYNOS DeviceTree   Thomas Abraham
• [PATCH v3 0/4] ARM: Exynos4: Add irq domain and device tree support for wakeup interrupts   Thomas Abraham
• [PATCH v3 1/4] ARM: Exynos4: Simplify EINT number to linux irq number translation   Thomas Abraham
• [PATCH v3 2/4] ARM: Exynos4: Add irq_domain support for gpio wakeup interrupts   Thomas Abraham
• [PATCH v3 3/4] ARM: Exynos4: Remove arch_initcall for wakeup interrupt initialization   Thomas Abraham
• [PATCH v3 4/4] ARM: Exynos4: Add device tree support for gpio wakeup interrupt controller   Thomas Abraham
• [PATCH v3 0/2] regulator: add irq domain and device tree support for MAX8997   Thomas Abraham
• [PATCH v3 1/2] mfd: add irq domain support for max8997 interrupts   Thomas Abraham
• [PATCH v3 2/2] regulator: add device tree support for max8997   Thomas Abraham
• [PATCH 1/2] ARM: EXYNOS: Add EHCI AHB burst function   Thomas Abraham
• Pinmux bindings proposal V2   Dong Aisheng
• Pinmux bindings proposal V2   Dong Aisheng
• Pinmux bindings proposal V2   Dong Aisheng
• Pinmux bindings proposal V2   Dong Aisheng
• [PATCH 2/2] pinctrl: Add simple pinmux driver using device tree data   Dong Aisheng
• [PATCH] pinctrl: changes hog mechanism to be self-referential   Dong Aisheng
• [PATCH 2/2] pinctrl: Add simple pinmux driver using device tree data   Dong Aisheng
• [PATCH V3 1/1] dt: add of_get_child_count helper function   Dong Aisheng
• [PATCH V3 1/1] dt: add of_get_child_count helper function   Dong Aisheng
• [PATCH 2/2] pinctrl: Add simple pinmux driver using device tree data   Dong Aisheng
• [PATCH] pinctrl: make the pinmux-pins more helpful   Dong Aisheng
• [PATCH] arm/io.h: add macros to read/write big/little endian register   Pratyush Anand
• [PATCH] arm/io.h: add macros to read/write big/little endian register   Pratyush Anand
• [PATCH] ux500 : decouple/recouple gic from the PRCMU   Rickard Andersson
• [PATCH] ux500 : decouple/recouple gic from the PRCMU   Rickard Andersson
• [PATCH] ux500 : decouple/recouple gic from the PRCMU   Rickard Andersson
• [PATCH][V2] ux500 : decouple/recouple gic from the PRCMU   Rickard Andersson
• [PATCH][V2] ux500 : decouple/recouple gic from the PRCMU   Rickard Andersson
• [PATCH v3] S3C24XX DMA resume regression fix   Gusakov Andrey
• [PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM   Dmitry Antipov
• [PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM   Dmitry Antipov
• [PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM   Dmitry Antipov
• [PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM   Dmitry Antipov
• [PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM   Dmitry Antipov
• [PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM   Dmitry Antipov
• [PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM   Dmitry Antipov
• [PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM   Dmitry Antipov
• [PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM   Dmitry Antipov
• [PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM   Dmitry Antipov
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Pantelis Antoniou
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Pantelis Antoniou
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Pantelis Antoniou
• [PATCH] rpmsg: fix build warning when compiling 64-bit   Mark Asselstine
• [PATCH V2] rpmsg: fix build warning when dma_addr_t is 64-bit   Mark Asselstine
• [PATCH] ARM: at91: Support for Kizbox board.   Boris BREZILLON
• [PATCH V2] mt_ventoux: support for TeeJet Mt.Ventoux board   Stefano Babic
• [PATCH v9 01/25] gpio/omap: remove dependency on gpio_bank_count   Felipe Balbi
• [PATCH v9 01/25] gpio/omap: remove dependency on gpio_bank_count   Felipe Balbi
• [PATCH v9 01/25] gpio/omap: remove dependency on gpio_bank_count   Felipe Balbi
• [PATCH v9 01/25] gpio/omap: remove dependency on gpio_bank_count   Felipe Balbi
• [PATCH v9 01/25] gpio/omap: remove dependency on gpio_bank_count   Felipe Balbi
• [RFC/PATCH] arm: omap3: pm: do not clear power states twice   Felipe Balbi
• [RFC/PATCH] arm: omap3: pm: do not clear power states twice   Felipe Balbi
• [PATCH v9 01/25] gpio/omap: remove dependency on gpio_bank_count   Felipe Balbi
• [PATCH v9 01/25] gpio/omap: remove dependency on gpio_bank_count   Felipe Balbi
• [PATCH v9 01/25] gpio/omap: remove dependency on gpio_bank_count   Felipe Balbi
• [PATCH v9 01/25] gpio/omap: remove dependency on gpio_bank_count   Felipe Balbi
• [PATCH 3.3] OMAP4: PRM: fix build breakage when CONFIG_OF is not defined   Felipe Balbi
• Possible circular locking dependency (3.3-rc2)   Felipe Balbi
• [PATCH] gpio: omap: be more aggressive with pm_runtime   Felipe Balbi
• [PATCH] gpio: omap: be more aggressive with pm_runtime   Felipe Balbi
• [PATCH] gpio: omap: be more aggressive with pm_runtime   Felipe Balbi
• [PATCH] gpio: omap: be more aggressive with pm_runtime   Felipe Balbi
• [PATCH] gpio: omap: be more aggressive with pm_runtime   Felipe Balbi
• [PATCH] gpio: omap: be more aggressive with pm_runtime   Felipe Balbi
• [PATCH] arm: omap: usb-host: fix compile warning   Felipe Balbi
• [PATCH 06/12] ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX   Felipe Balbi
• [PATCH 1/6] gpio/omap: remove saved_fallingdetect, saved_risingdetect fields   Felipe Balbi
• [PATCH 2/6] gpio/omap: remove saved_wakeup field from struct gpio_bank   Felipe Balbi
• [PATCH 3/6] gpio/omap: remove suspend_wakeup field from struct gpio_bank   Felipe Balbi
• [PATCH 4/6] gpio/omap: get rid of retrigger variable in gpio_irq_handler   Felipe Balbi
• [PATCH 5/6] gpio/omap: fix trigger type to unsigned   Felipe Balbi
• [PATCH 6/6] gpio/omap: fix _set_gpio_irqenable implementation   Felipe Balbi
• [PATCH] mmc: atmel-mci: save and restore sdioirq when soft reset is performed   Chris Ball
• [PATCH v3 0/6] mmc: sdhci-s3c: Rework platform data and add device tree support   Chris Ball
• [PATCH v3 0/6] mmc: sdhci-s3c: Rework platform data and add device tree support   Chris Ball
• [GIT PULL] at91 mmc fixes for 3.3-rc[45]   Chris Ball
• [PATCH] ARM: OMAP: hsmmc: add max_freq field   Chris Ball
• [PATCH v3 0/6] mmc: sdhci-s3c: Rework platform data and add device tree support   Chris Ball
• atmel-mci causing oops?   Chris Ball
• [PATCHv2 5/6] jump label: detect %c support for ARM   Jason Baron
• [PATCHv3] ARM: add jump label support   Jason Baron
• [PATCH 1/1] ARM: OMAP3+: dpll: Configure autoidle mode only if its supported   Vaibhav Bedia
• [RFC PATCH 3/8] misc: emif: add register definitions for EMIF   Bedia, Vaibhav
• [RFC PATCH 3/8] misc: emif: add register definitions for EMIF   Bedia, Vaibhav
• [PATCH v2 2/2] ARM: OMAP: sram: Add am33xx SRAM support (minimal)   Bedia, Vaibhav
• [PATCH] ARM: OMAP2+: hwmod: Add new sysc_type3 into omap_hwmod required for am33xx   Bedia, Vaibhav
• [PATCH] ARM: OMAP2: fix mailbox init code   Bedia, Vaibhav
• [PATCH V5 1/5] ARM: exynos: Add support AFTR mode on EXYNOS4210   Tushar Behera
• [PATCH V6 1/5] ARM: exynos: Add support AFTR mode on EXYNOS4210   Tushar Behera
• [PATCH 1/2] ARM: EXYNOS: Add EHCI AHB burst function   Tushar Behera
• [PATCH 1/2] ARM: EXYNOS: Add USB HOST register definitions   Tushar Behera
• [PATCH] arm/imx6: Rename DEBUG_IMX6Q_UART to UART4   Dirk Behme
• [PATCH] ARM: mx3: Setup AIPS registers   Dirk Behme
• [2.6.39.3] [MX25] oops in driver_register for ADC touchscreen support (imx_adc_ts)   Juergen Beisert
• Adding remoteproc/rpmsg to linux-next   Ohad Ben-Cohen
• Adding remoteproc/rpmsg to linux-next   Ohad Ben-Cohen
• [PATCH 1/2] remoteproc: bail out if firmware has different endianess   Ohad Ben-Cohen
• remoteproc: Load coprocessor code to the specific main memory location   Ohad Ben-Cohen
• remoteproc: Load coprocessor code to the specific main memory location   Ohad Ben-Cohen
• remoteproc: Load coprocessor code to the specific main memory location   Ohad Ben-Cohen
• remoteproc: Load coprocessor code to the specific main memory location   Ohad Ben-Cohen
• remoteproc: Load coprocessor code to the specific main memory location   Ohad Ben-Cohen
• remoteproc: Load coprocessor code to the specific main memory location   Ohad Ben-Cohen
• [PATCH 1/2] iommu/omap: fix erroneous omap-iommu-debug API calls   Ohad Ben-Cohen
• [PATCH 2/2] iommu/omap: fix NULL pointer dereference   Ohad Ben-Cohen
• [PATCH 2/2] iommu/omap: fix NULL pointer dereference   Ohad Ben-Cohen
• [PATCH v2 2/2] iommu/omap: fix NULL pointer dereference   Ohad Ben-Cohen
• remoteproc: Load coprocessor code to the specific main memory location   Ohad Ben-Cohen
• [GIT PULL] adding rpmsg and remoteproc to 3.4   Ohad Ben-Cohen
• [PATCH] ARM: OMAP2: fix mailbox init code   Ohad Ben-Cohen
• [GIT PULL] adding rpmsg and remoteproc to 3.4   Ohad Ben-Cohen
• [PATCH v2 2/2] iommu/omap: fix NULL pointer dereference   Ohad Ben-Cohen
• [PATCH] ARM: OMAP2: fix mailbox init code   Ohad Ben-Cohen
• [PATCH] ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp   Ohad Ben-Cohen
• [PATCH v2 2/2] iommu/omap: fix NULL pointer dereference   Ohad Ben-Cohen
• [PATCH] ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp   Ohad Ben-Cohen
• [PATCH] ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp   Ohad Ben-Cohen
• [PATCH 0/5] trivial remoteproc/rpmsg fixes   Ohad Ben-Cohen
• [PATCH 0/5] trivial remoteproc/rpmsg fixes   Ohad Ben-Cohen
• [PATCH 1/5] remoteproc: make sure we're parsing a 32bit firmware   Ohad Ben-Cohen
• [PATCH 2/5] remoteproc/omap: two Kconfig fixes   Ohad Ben-Cohen
• [PATCH 3/5] rpmsg: fix name service endpoint leak   Ohad Ben-Cohen
• [PATCH 4/5] rpmsg: validate incoming message length before propagating   Ohad Ben-Cohen
• [PATCH 5/5] rpmsg: fix published buffer length in rpmsg_recv_done   Ohad Ben-Cohen
• [GIT PULL] cs89x0 platform support   Arnd Bergmann
• [PATCH 2/6] drivers/base: add bus for System-on-Chip devices   Arnd Bergmann
• Adding remoteproc/rpmsg to linux-next   Arnd Bergmann
• [PATCH 1/4] Remove Telechips ARM subarch from MAINTAINERS   Arnd Bergmann
• [PATCH V2 1/4] pinctrl: add a driver for NVIDIA Tegra   Arnd Bergmann
• [PATCH 1/4] Remove Telechips ARM subarch from MAINTAINERS   Arnd Bergmann
• [PATCH V2 1/4] pinctrl: add a driver for NVIDIA Tegra   Arnd Bergmann
• [PATCH 5/9] ARM: EXYNOS: add board file for SMDK5250   Arnd Bergmann
• [PATCH 6/9] serial: samsung: Add support for EXYNOS5250   Arnd Bergmann
• [PATCH v6 02/15] ARM: SoC: Add per SoC SMP and CPU hotplug operations   Arnd Bergmann
• [GIT PULL] cs89x0 platform support   Arnd Bergmann
• [GIT PULL] Samsung EXYNOS pm domains for devel   Arnd Bergmann
• [GIT PULL] Samsung EXYNOS pm domains for devel   Arnd Bergmann
• [PATCH v2 03/11] ARM: EXYNOS: add clock part for EXYNOS5250 SoC   Arnd Bergmann
• [GIT PULL] please pull tegra fixes for 3.3-rc   Arnd Bergmann
• [PATCH v2 03/11] ARM: EXYNOS: add clock part for EXYNOS5250 SoC   Arnd Bergmann
• [GIT PULL] samsung dt fixes-3 for v3.3   Arnd Bergmann
• [GIT PULL] samsung devel-rtc for v3.4   Arnd Bergmann
• [PATCH 0/6] ux500: Export SoC information and some platform clean-up   Arnd Bergmann
• [PATCH] ep93xx: fix build of vision_ep93xx.c   Arnd Bergmann
• [PATCH] ep93xx: fix build of vision_ep93xx.c   Arnd Bergmann
• [GIT PULL] omap fixes for v3.3-rc3   Arnd Bergmann
• [GIT PULL] at91: fixes for 3.3-rc4   Arnd Bergmann
• [PATCH 13/15] ARM: make mach/io.h include optional   Arnd Bergmann
• [PATCH 13/15] ARM: make mach/io.h include optional   Arnd Bergmann
• [PATCH 13/15] ARM: make mach/io.h include optional   Arnd Bergmann
• [PATCH 13/15] ARM: make mach/io.h include optional   Arnd Bergmann
• [PATCH 00/15] mach/io.h cleanup and removal   Arnd Bergmann
• [PATCH 13/15] ARM: make mach/io.h include optional   Arnd Bergmann
• [PATCH 13/15] ARM: make mach/io.h include optional   Arnd Bergmann
• [PATCH 00/15] mach/io.h cleanup and removal   Arnd Bergmann
• [PATCH 00/15] mach/io.h cleanup and removal   Arnd Bergmann
• [PATCH 13/15] ARM: make mach/io.h include optional   Arnd Bergmann
• [GIT PULL] arm-soc fixes for 3.3-rc4   Arnd Bergmann
• [PATCH v2 08/11] ARM: EXYNOS: add support for ARCH_EXYNOS5 and EXYNOS5250   Arnd Bergmann
• [PATCH v2 03/11] ARM: EXYNOS: add clock part for EXYNOS5250 SoC   Arnd Bergmann
• [PATCH v2 03/11] ARM: EXYNOS: add clock part for EXYNOS5250 SoC   Arnd Bergmann
• [GIT PULL] ux500 patches for v3.4   Arnd Bergmann
• [GIT PULL] [v3.3] fixes for arch-pxa in arm   Arnd Bergmann
• [PATCH 6/7] rtc: sa1100: enable clk support   Arnd Bergmann
• [PATCH 4/7] ARM: sa1100: clean up of the clock support   Arnd Bergmann
• [PATCH 3/7] rtc: sa1100: use ioremap to map registers   Arnd Bergmann
• [PATCH 0/7] share sa1100 rtc driver to arch-mmp   Arnd Bergmann
• [GIT PULL] [v3.3] fixes for arch-pxa in arm   Arnd Bergmann
• [PATCHv22 14/16] X86: integrate CMA with DMA-mapping subsystem   Arnd Bergmann
• [PATCH 6/7] rtc: sa1100: enable clk support   Arnd Bergmann
• [PATCH 0/7] share sa1100 rtc driver to arch-mmp   Arnd Bergmann
• [PATCH v5] ARM: LPC32xx: ADC support for mach-lpc32xx   Arnd Bergmann
• [PATCH v2 02/19] ARM: at91/at91x40: remove use of at91_sys_read/write   Arnd Bergmann
• [PATCH v2 12/19] ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use   Arnd Bergmann
• [PATCH v3 09/10] pwm: Add PXA support   Arnd Bergmann
• [PATCH v3 00/10] Add PWM framework and device tree support.   Arnd Bergmann
• [PATCH v3 03/10] of: Add PWM support.   Arnd Bergmann
• [PATCH v3 02/10] pwm: Allow chips to support multiple PWMs.   Arnd Bergmann
• [PATCH v2 12/19] ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use   Arnd Bergmann
• [PATCH 1/2] ARM: S3C24XX: Move s3c2443-clock.c to mach-s3c24xx   Arnd Bergmann
• [PATCH 2/2] ARM: S3C24XX: Move the DMA base code to mach-s3c24xx   Arnd Bergmann
• [PATCH v2 12/19] ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use   Arnd Bergmann
• [PATCH 1/3] arm: ignore devicetree blobs.   Arnd Bergmann
• [PATCH 2/3 v4] arm: kirkwood: add dreamplug (fdt) support.   Arnd Bergmann
• [PATCH 3/3] arm: kirkwood: convert uart0 to devicetree.   Arnd Bergmann
• [PATCH 2/3 v4] arm: kirkwood: add dreamplug (fdt) support.   Arnd Bergmann
• [PATCH 1/2] GPIO: LPC32xx: Fix missing bit selection mask   Arnd Bergmann
• [PATCH] arm/io.h: add macros to read/write big/little endian register   Arnd Bergmann
• [PATCH v2 1/2] GPIO: LPC32xx: Fix missing bit selection mask   Arnd Bergmann
• [PATCH] arm/io.h: add macros to read/write big/little endian register   Arnd Bergmann
• [PATCH] i.MX31: mxc-rnga: implement waiting for data in driver   Arnd Bergmann
• [PATCH 2/2] GPIO: LPC32xx: Add output reading to GPO P3   Arnd Bergmann
• [PATCH v3 03/10] of: Add PWM support.   Arnd Bergmann
• [PATCH v3 02/10] pwm: Allow chips to support multiple PWMs.   Arnd Bergmann
• [GIT PULL] i.MX assorted   Arnd Bergmann
• [GIT PULL] adding rpmsg and remoteproc to 3.4   Arnd Bergmann
• [PATCH] ARM: OMAP: enable Bluetooth on the PandaBoard   Arnd Bergmann
• [PATCHv6 7/7] ARM: dma-mapping: add support for IOMMU mapper   Arnd Bergmann
• [PATCHv6 7/7] ARM: dma-mapping: add support for IOMMU mapper   Arnd Bergmann
• [GIT PULL] Versatile Express DT support   Arnd Bergmann
• [PATCH v2] USB: Support for LPC32xx SoC   Arnd Bergmann
• [GIT PULL] ux500 patches for v3.4   Arnd Bergmann
• [PATCH 00/14] DMA-mapping framework redesign preparation   Arnd Bergmann
• [PATCH] arm/io.h: add macros to read/write big/little endian register   Arnd Bergmann
• [GIT PULL] ux500 patches for v3.4   Arnd Bergmann
• [GIT PULL] ux500 patches for v3.4 take 2   Arnd Bergmann
• [PATCH v3 03/10] of: Add PWM support.   Arnd Bergmann
• [PATCH v2] USB: Support for LPC32xx SoC   Arnd Bergmann
• [PATCH 3/6] ux500: select MFD_SUPPORT when needed   Arnd Bergmann
• [PATCH v2] USB: Support for LPC32xx SoC   Arnd Bergmann
• [GIT PULL] ux500 patches for v3.4 take 2   Arnd Bergmann
• [GIT PULL] i.MX fixes   Arnd Bergmann
• [GIT PULL] i.MX driver patches   Arnd Bergmann
• [PATCH v2] USB: Support for LPC32xx SoC   Arnd Bergmann
• [GIT PULL] LPC32xx fixes for v3.3-rc4   Arnd Bergmann
• [GIT PULL] DaVinci fix for v3.4   Arnd Bergmann
• [GIT PULL] DaVinci cleanups for v3.4   Arnd Bergmann
• [GIT PULL] [for 3.4] git pull request for arch-pxa   Arnd Bergmann
• [PATCH 0/2 v6] arm: kirkwood: add dreamplug/devicetree support   Arnd Bergmann
• [GIT PULL] omap fixes for v3.3-rc4   Arnd Bergmann
• [GIT PULL] at91 first cleanup series for 3.4   Arnd Bergmann
• [GIT PULL] LPC32xx fixes for v3.3-rc4   Arnd Bergmann
• [GIT PULL] LPC32xx fixes for v3.3-rc5   Arnd Bergmann
• [GIT PULL] LPC32xx fixes-non-critical for v3.3-rc5   Arnd Bergmann
• [PATCH v3] lpc32xx: Added ethernet driver   Arnd Bergmann
• [PATCH v2] USB: Support for LPC32xx SoC   Arnd Bergmann
• [PATCH v3] ARM: LPC32xx: Ethernet support   Arnd Bergmann
• [PATCH WIP] ARM: kirkwood: covert orion-spi to fdt.   Arnd Bergmann
• [PATCH WIP] ARM: kirkwood: covert orion-spi to fdt.   Arnd Bergmann
• [GIT PULL] at91 first cleanup series for 3.4   Arnd Bergmann
• [GIT PULL] mxs gpmi for v3.4   Arnd Bergmann
• [GIT PULL] imx driver for v3.4   Arnd Bergmann
• [GIT PULL] imx DT changes for v3.4   Arnd Bergmann
• [GIT PULL] MAINTAINERS IMX update for v3.4   Arnd Bergmann
• [GIT PULL] imx_v6_v7_defconfig updates for v3.4   Arnd Bergmann
• [GIT PULL][v3.4] pull request of rtc-sa1100 branch in pxa git tree   Arnd Bergmann
• [GIT PULL][v3.4] request pull cleanup-3.4 branch in pxa git tree   Arnd Bergmann
• [GIT PULL][v3.4] pull request of board-specific branch in pxa git tree   Arnd Bergmann
• [PATCH v2] ARM: LPC32xx: Ethernet driver   Arnd Bergmann
• [GIT PULL] DaVinci cleanups for v3.4   Arnd Bergmann
• [PATCH v2] USB: Support for LPC32xx SoC   Arnd Bergmann
• [PATCH WIP] ARM: kirkwood: covert orion-spi to fdt.   Arnd Bergmann
• [PATCH 13/15] ARM: make mach/io.h include optional   Arnd Bergmann
• [PATCH 13/15] ARM: make mach/io.h include optional   Arnd Bergmann
• [PATCH v2] ARM: kirkwood: covert orion-spi to fdt.   Arnd Bergmann
• [PATCH] ARM: remove ixp2000 platform   Arnd Bergmann
• [GIT PULL] at91 first cleanup series for 3.4   Arnd Bergmann
• [PATCH 1/7] Add various hugetlb arm high level hooks   Arnd Bergmann
• [PATCH 7/7] Minor compiling fix   Arnd Bergmann
• RFC: what do we do with system controllers?   Arnd Bergmann
• [GIT PULL] ux500 patches for v3.4 take 2   Arnd Bergmann
• Question: how to make one page readonly on ARM   Arnd Bergmann
• [PATCH] mach-kirkwood: Support for DLink DNS-320 & DNS-325 NAS   Arnd Bergmann
• [PATCH] rpmsg: fix build warning when compiling 64-bit   Arnd Bergmann
• [PATCH 6/6] ARM: ux500: select I2C for U8500   Arnd Bergmann
• [GIT PULL] arm-soc fixes for v3.3   Arnd Bergmann
• [PATCH] ARM: ux500: solve some Kconfig mess   Arnd Bergmann
• [PATCH] ARM: ux500: solve some Kconfig mess   Arnd Bergmann
• [GIT PULL 1/5] non-critical fixes for v3.4 merge window   Arnd Bergmann
• [GIT PULL 2/5] First set of omap SoC related changes   Arnd Bergmann
• [GIT PULL 3/5] First set of omap1 related changes   Arnd Bergmann
• [GIT PULL 4/5] First round of DT related omap changes   Arnd Bergmann
• [GIT PULL 5/5] Clean-up for omap   Arnd Bergmann
• [PATCH v2 07/28] ARM: iop13xx: move io.h externs to io.c   Arnd Bergmann
• [PATCH v2 19/28] ARM: Add fixed PCI i/o mapping   Arnd Bergmann
• [PATCH v2 03/28] ARM: imx: convert to common runtime ioremap hook   Arnd Bergmann
• [PATCH 2/12] arch/arm: remove references to cpu_*_map.   Srivatsa S. Bhat
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Tim Bird
• [PATCH RFC 2/2] mtd : Make the mtd_suspend return 0 if the suspend is not implemented   Artem Bityutskiy
• [PATCH v3] mtd/gpmi : add BBT support to gpmi nand driver   Bityutskiy, Artem
• [PATCH 2/2] mtd: ixp4xx: oops in ixp4xx_flash_probe   Artem Bityutskiy
• [PATCH V3] MTD: atmel_nand: Update driver to support Programmable HW ECC controller   Artem Bityutskiy
• [PATCH] mtd/gpmi : add gpmi support for mx6q   Bityutskiy, Artem
• [PATCH] MTD: atmel_nand: Update driver to support Programmable HW ECC controller   Artem Bityutskiy
• Re: 答复: [PATCH] mtd/gpmi : add gpmi support for mx6q   Bityutskiy, Artem
• 答复: 答复: [PATCH] mtd/gpmi : add gpmi support for mx6q   Artem Bityutskiy
• Re: 答复: [PATCH] mtd/gpmi : add gpmi support for mx6q   Bityutskiy, Artem
• [PATCH v6 0/2] patch set about the MXS-DMA   Bityutskiy, Artem
• [PATCH] mtd/gpmi : fix compiler warning   Bityutskiy, Artem
• [PATCH v6 0/2] patch set about the MXS-DMA   Bityutskiy, Artem
• [PATCH] mtd : change the location of the ONFI detected log   Bityutskiy, Artem
• hex number case in dts files.   Segher Boessenkool
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Stephen Boyd
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Stephen Boyd
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Stephen Boyd
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Stephen Boyd
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Stephen Boyd
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Stephen Boyd
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Stephen Boyd
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Stephen Boyd
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Stephen Boyd
• [PATCH] msm: timer: Support sched_clock()   Stephen Boyd
• [PATCH] msm: timer: Support sched_clock()   Stephen Boyd
• An extremely simplified pinctrl bindings proposal   Mitch Bradley
• An extremely simplified pinctrl bindings proposal   Mitch Bradley
• An extremely simplified pinctrl bindings proposal   Mitch Bradley
• [PATCH v3] DMA: PL330: Merge PL330 driver into drivers/dma/   Jassi Brar
• [PATCH v3] DMA: PL330: Merge PL330 driver into drivers/dma/   Jassi Brar
• [PATCH v3] DMA: PL330: Merge PL330 driver into drivers/dma/   Jassi Brar
• [PATCH v3] DMA: PL330: Merge PL330 driver into drivers/dma/   Jassi Brar
• [PATCH v3] DMA: PL330: Merge PL330 driver into drivers/dma/   Jassi Brar
• [PATCH v3] DMA: PL330: Merge PL330 driver into drivers/dma/   Jassi Brar
• [PATCH 1/2] ARM: S3C24XX: Move s3c2443-clock.c to mach-s3c24xx   Jassi Brar
• [PATCH v3] DMA: PL330: Merge PL330 driver into drivers/dma/   Jassi Brar
• [PATCH,FIXED] PCMCIA card inserted, five s2ram cycles, you're dead   Dominik Brodowski
• [PATCH] cpufreq: get rid of remaining references to CONFIG_CPU_FREQ_DEBUG   Dominik Brodowski
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Dominik Brodowski
• [PATCH] ARM: ptrace: fix ptrace_read_user for !CONFIG_MMU platforms   Paul Brook
• [PATCH v6 07/15] ARM: SoC: convert MSM SMP to SoC descriptor   David Brown
• [PATCH v6 02/15] ARM: SoC: Add per SoC SMP and CPU hotplug operations   David Brown
• [PATCH v6 02/15] ARM: SoC: Add per SoC SMP and CPU hotplug operations   David Brown
• hex number case in dts files.   David Brown
• hex number case in dts files.   David Brown
• [PATCH 05/15] ARM: msm: use runtime ioremap hook   David Brown
• [PATCH] ARM: need to include asm/system.h in asm/processor.h   David Brown
• [PATCH] msm: timer: Support sched_clock()   David Brown
• [PATCH] msm: timer: Support sched_clock()   David Brown
• [PATCH] msm: timer: Support sched_clock()   David Brown
• [PATCH] pinctrl: delete raw device pointers in pinmux maps   Mark Brown
• [PATCH v2 6/9] ARM: mx31ads: add audmux device   Mark Brown
• [PATCH v2 8/9] ASoC: imx: add dt support for audmux-v2   Mark Brown
• [RFC 4/7] OMAP: 4430sdp: Correct fixed regulator device ID   Mark Brown
• [RFC 5/7] OMAP: sdp4430: Add fixed regulator for twl6040 needs   Mark Brown
• [RFC 6/7] OMAP: omap4panda: Add fixed regulator for twl6040 needs   Mark Brown
• [RFC 3/7] ASoC: twl6040: Remove dependency on twl4030 from Kconfig   Mark Brown
• [RFC 2/7] MFD: twl6040: Convert to i2c driver, and separate it from twl core   Mark Brown
• [RFC 7/7] MFD: TWL6040: Add regulator support for VIO, V2V1 supplies   Mark Brown
• [PATCH v2 6/9] ARM: mx31ads: add audmux device   Mark Brown
• [RFC 2/7] MFD: twl6040: Convert to i2c driver, and separate it from twl core   Mark Brown
• [RFC 7/7] MFD: TWL6040: Add regulator support for VIO, V2V1 supplies   Mark Brown
• [PATCH v2 6/9] ARM: mx31ads: add audmux device   Mark Brown
• [PATCH v2 6/9] ARM: mx31ads: add audmux device   Mark Brown
• [RFC 7/7] MFD: TWL6040: Add regulator support for VIO, V2V1 supplies   Mark Brown
• [alsa-devel] [RFC PATCH] ARM ASoC: add sound driver for imx27pdk using mc13783 codec   Mark Brown
• [alsa-devel] [RFC PATCH] ARM ASoC: add sound driver for imx27pdk using mc13783 codec   Mark Brown
• [PATCH 1/4] i2c/gpio-i2c add: add DT support   Mark Brown
• [PATCH 2/2] misc: c2c: Add C2C(Chip to Chip) device driver for EXYNOS   Mark Brown
• An extremely simplified pinctrl bindings proposal   Mark Brown
• [PATCH 1/4] i2c/gpio-i2c add: add DT support   Mark Brown
• [PATCH v2 02/10] pwm: Allow chips to support multiple PWMs.   Mark Brown
• [PATCH v2 7/7] MFD: TWL6040: Add regulator support for VIO, V2V1 supplies   Mark Brown
• [PATCH v2 2/7] MFD: twl6040: Convert to i2c driver, and separate it from twl core   Mark Brown
• [PATCH v2 3/7] ASoC: twl6040: Remove dependency on twl4030 from Kconfig   Mark Brown
• [PATCH v2 2/7] MFD: twl6040: Convert to i2c driver, and separate it from twl core   Mark Brown
• [PATCH v3 00/25] irq_domain generalization and refinement   Mark Brown
• [RESEND PATCH] davinci: CQ93VC: remove machine specific header file inclusion from codec driver   Mark Brown
• [PATCH v4 2/2] Regulator: Add Anatop regulator driver   Mark Brown
• [PATCH v3 3/3] ASoC: twl6040: Remove dependency on twl4030 from Kconfig   Mark Brown
• [PATCH 2/7] regulator: twl-regulator: Add fixed LDO for V1V8, V2V1 supply   Mark Brown
• [PATCH] OMAP: serial: Release the claimed memory region in remove   Mark Brown
• [PATCH v4 2/2] Regulator: Add Anatop regulator driver   Mark Brown
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Mark Brown
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Mark Brown
• [PATCH v2 03/11] ARM: EXYNOS: add clock part for EXYNOS5250 SoC   Mark Brown
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Mark Brown
• [PATCH v5 1/2] mxs-dma : move the mxs dma.h to a more common place   Mark Brown
• [PATCH] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Mark Brown
• [PATCH] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Mark Brown
• [PATCH v2 6/9] ARM: mx31ads: add audmux device   Mark Brown
• [PATCH v2 6/9] ARM: mx31ads: add audmux device   Mark Brown
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Mark Brown
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Mark Brown
• [RFC 00/11]O MAP/ASoC: Move and merge McBSP driver under ASoC   Mark Brown
• [PATCH] ARM: S3C64XX: Supply platform data for SPI on Cragganmore   Mark Brown
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Mark Brown
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Mark Brown
• [PATCHv9 4/5] regulator: twl4030: add support for external voltage get/set   Mark Brown
• [GIT PULL] i.MX assorted   Mark Brown
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Mark Brown
• [PATCH 1/2] ARM: U300: Don't specify regulator consumers by struct device   Mark Brown
• [PATCH 1/2] ALSA: Remove __devinit annotation for pxa2xx_ac97_hw_probe to fix section mismatch warning   Mark Brown
• [PATCH] ASoC: Add __devinit annotation for pxa2xx_ac97_probe   Mark Brown
• [PATCH] ASoC: imx/mxs: remove redundant SND_PCM selection   Mark Brown
• [PATCH v3 0/6] mmc: sdhci-s3c: Rework platform data and add device tree support   Mark Brown
• [V1 1/4] regulator: fix the ldo configure according to 88pm860x spec   Mark Brown
• [PATCH v3 1/2] regulator: twl: adapt twl-regulator driver to dt   Mark Brown
• [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators   Mark Brown
• [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators   Mark Brown
• [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators   Mark Brown
• [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators   Mark Brown
• [PATCH 0/6] ASoC: a few cleanups on sound/soc/fsl   Mark Brown
• [PATCH 6/6] ASoC: fsl: check property 'compatible' for the machine name   Mark Brown
• [PATCH 0/6] ASoC: a few cleanups on sound/soc/fsl   Mark Brown
• [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators   Mark Brown
• [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators   Mark Brown
• [V1 1/4] regulator: fix the ldo configure according to 88pm860x spec   Mark Brown
• [PATCH 6/6] ASoC: fsl: check property 'compatible' for the machine name   Mark Brown
• [PATCH 6/6] ASoC: fsl: check property 'compatible' for the machine name   Mark Brown
• [PATCH 0/6] ASoC: a few cleanups on sound/soc/fsl   Mark Brown
• [PATCH 6/6] ASoC: fsl: check property 'compatible' for the machine name   Mark Brown
• [PATCH 0/6] ASoC: a few cleanups on sound/soc/fsl   Mark Brown
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Mark Brown
• [PATCH v3 0/2] Device tree support for TWL regulators   Mark Brown
• [PATCHv2] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators   Mark Brown
• [PATCH v3 0/2] Device tree support for TWL regulators   Mark Brown
• [PATCH] ASoC: imx: let SND_MXC_SOC_FIQ select FIQ   Mark Brown
• [PATCH v3 0/2] Device tree support for TWL regulators   Mark Brown
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Mark Brown
• [PATCH v3 0/2] Device tree support for TWL regulators   Mark Brown
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Mark Brown
• [PATCH 1/6] ASoC: fsl: correct get_dma_channel parameter name   Mark Brown
• [PATCH 2/6] ASoC: fsl: align mpc8610_hpcd with p1022_ds on getting codec node   Mark Brown
• [PATCH 3/6] ASoC: Remove unnecessary -codec from cs4270 driver name   Mark Brown
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Mark Brown
• [PATCH 0/4] twl-regulator DT adaptation and updates to add new regulators   Mark Brown
• [PATCH] regulator mc13783: bail out without platform data   Mark Brown
• [2.6.39.3] [MX25] oops in driver_register for ADC touchscreen support (imx_adc_ts)   Eric Bénard
• [2.6.39.3] [MX25] oops in driver_register for ADC touchscreen support (imx_adc_ts)   Eric Bénard
• [PATCH] ARM: LPC32xx: ADC support   Jonathan Cameron
• [PATCH 02/11] Revert "ARM: pxa: add dummy clock for sa1100-rtc"   Jonathan Cameron
• [PATCH v3] ARM: LPC32xx: ADC support   Jonathan Cameron
• IIO irq allocation fails on AT91SAM9G45   Jonathan Cameron
• [regression] Re: Enabling runtime P2V by default   Ian Campbell
• Oops in guest after ioremap() on ARMv7   Ian Campbell
• Oops in guest after ioremap() on ARMv7   Ian Campbell
• [PATCH 0/2 v5] arm: kirkwood: add dreamplug/devicetree support   Ian Campbell
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Ian Campbell
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Ian Campbell
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Ian Campbell
• [PATCH 0/2 v5] arm: kirkwood: add dreamplug/devicetree support   Ian Campbell
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Ian Campbell
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Ian Campbell
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Ian Campbell
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Ian Campbell
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Ian Campbell
• [PATCH] ARM: S3C24XX: Fix restart on S3C2442   Denis 'GNUtoo' Carikli
• [PATCH] ARM: S3C24XX: Fix restart on S3C2442   Denis 'GNUtoo' Carikli
• [PATCH] Add poll_get_char & poll_put_char to uart_ops for the samsung UARTS.   Denis 'GNUtoo' Carikli
• [PATCH V1] hotplug: eliminate warning Unknown IPI message 0x1   Bill Carson
• [PATCH] hotplug: eliminate warning "Unknown IPI message 0x1"   Bill Carson
• [RFC-PATCH V2] ARM hugetlb support   Bill Carson
• [PATCH 1/7] Add various hugetlb arm high level hooks   Bill Carson
• [PATCH 2/7] Add various hugetlb page table fix   Bill Carson
• [PATCH 3/7] Introduce set_hugepte_ext api to setup huge hardware pmds   Bill Carson
• [PATCH 4/7] Store huge page linux pte in mmu_context_t   Bill Carson
• [PATCH 5/7] Using do_page_fault for section fault handling   Bill Carson
• [PATCH 6/7] Add hugetlb Kconfig option   Bill Carson
• [PATCH 7/7] Minor compiling fix   Bill Carson
• [PATCH] arm/spear600: fix one-shot timer   Gilles Chanteperdrix
• [PATCH v2] arm/spear600: fix one-shot timer   Gilles Chanteperdrix
• [PATCH] ARM: perf: add PMU hotplug notifier   Ashwin Chaugule
• [PATCH] ARM: perf: add PMU hotplug notifier   Ashwin Chaugule
• [PATCH] ARM: perf: add PMU hotplug notifier   Ashwin Chaugule
• [PATCH v4 0/2] Add support form eMMa-PrP in i.MX2 chips as a mem2mem device.   Mauro Carvalho Chehab
• [PATCH v8 0/2] ommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   KyongHo Cho
• [PATCH v8 0/2] ommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   KyongHo Cho
• [PATCH v9 0/2] iommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   KyongHo Cho
• [PATCH v9 1/2] ARM: EXYNOS: Change System MMU platform device definitions   KyongHo Cho
• [PATCH v9 2/2] iommu/exynos: Add iommu driver for Exynos Platforms   KyongHo Cho
• [PATCH v9 1/2] ARM: EXYNOS: Change System MMU platform device definitions   KyongHo Cho
• [PATCH v9 2/2] iommu/exynos: Add iommu driver for Exynos Platforms   KyongHo Cho
• [BUG] genirq: Race condition in ONESHOT IRQ handler disabling IRQ forever   Lars-Peter Clausen
• [PATCH v2 02/10] pwm: Allow chips to support multiple PWMs.   Lars-Peter Clausen
• [BUG] genirq: Race condition in ONESHOT IRQ handler disabling IRQ forever   Lars-Peter Clausen
• [PATCH RESEND] ixp4xx: clockevent set_next_event fix   Richard Cochran
• [PATCH 3.3] OMAP4: PRM: fix build breakage when CONFIG_OF is not defined   Luciano Coelho
• [PATCH 3.3] OMAP4: PRM: fix build breakage when CONFIG_OF is not defined   Luciano Coelho
• [PATCH 3.3 v2] OMAP4: PRM: fix build breakage when CONFIG_OF is not defined   Luciano Coelho
• [PATCH 3.3 v2] OMAP4: PRM: fix build breakage when CONFIG_OF is not defined   Luciano Coelho
• [PATCH 1/1] arm/vfp: vfp_pm_suspend: Use local variable instead of rereading from register   Kautuk Consul
• [PATCH 1/1] arm: vfp: Raising SIGFPE on invalid floating point operation   Kautuk Consul
• [PATCH 1/1] arm: vfp: Raising SIGFPE on invalid floating point operation   Kautuk Consul
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Felipe Contreras
• [PATCH 0/3 v4] arm: kirkwood: add dreamplug/devicetree support   Jason Cooper
• [PATCH 1/3] arm: ignore devicetree blobs.   Jason Cooper
• [PATCH 2/3 v4] arm: kirkwood: add dreamplug (fdt) support.   Jason Cooper
• [PATCH 3/3] arm: kirkwood: convert uart0 to devicetree.   Jason Cooper
• [PATCH 0/2 v5] arm: kirkwood: add dreamplug/devicetree support   Jason Cooper
• [PATCH 1/2 v5] arm: kirkwood: add dreamplug (fdt) support.   Jason Cooper
• [PATCH 2/2 v2] arm: kirkwood: convert uart0 to devicetree.   Jason Cooper
• [PATCH 0/2 v6] arm: kirkwood: add dreamplug/devicetree support   Jason Cooper
• [PATCH 1/2 v6] arm: kirkwood: add dreamplug (fdt) support.   Jason Cooper
• [PATCH 2/2 v2] arm: kirkwood: convert uart0 to devicetree.   Jason Cooper
• [PATCH WIP] ARM: kirkwood: covert orion-spi to fdt.   Jason Cooper
• [PATCH v2] ARM: kirkwood: covert orion-spi to fdt.   Jason Cooper
• [PATCH v3] ARM: kirkwood: covert orion-spi to fdt.   Jason Cooper
• [RFC PATCH 1/2] of: Add generic device tree DMA helpers   Cousson, Benoit
• [RFC PATCH 1/2] of: Add generic device tree DMA helpers   Cousson, Benoit
• [PATCH] arm/dts: OMAP3: Add omap3evm and am335xevm support   Cousson, Benoit
• [PATCH v9 01/25] gpio/omap: remove dependency on gpio_bank_count   Cousson, Benoit
• [PATCH v9 01/25] gpio/omap: remove dependency on gpio_bank_count   Cousson, Benoit
• [PATCH v3 13/25] irq_domain: Remove 'new' irq_domain in favour of the ppc one   Cousson, Benoit
• [PATCH 04/16] ARM: omap: fix prm44xx.c OMAP44XX_IRQ_PRCM build error   Cousson, Benoit
• [PATCH] ARM: OMAP2+: Fix prm2xxx_3xxx.c INT_34XX_PRCM_MPU_IRQ build error   Cousson, Benoit
• [PATCH] ARM: OMAP2+: Fix prm2xxx_3xxx.c INT_34XX_PRCM_MPU_IRQ build error   Cousson, Benoit
• [PATCH 1/4] ARM: OMAP2+: board-generic: Remove un-needed .atag_offset for DT_MACHINE   Benoit Cousson
• [PATCH 2/4] ARM: OMAP2+: omap_device: Replace dev_warn by dev_dbg in omap_device_build_from_dt   Benoit Cousson
• [PATCH 3/4] ARM: OMAP2+: pm: Do not init statically the SR and voltage layer with DT   Benoit Cousson
• [PATCH 4/4] ARM: OMAP1: kconfig: Enable IRQ_DOMAIN by default for OMAP1 platforms   Benoit Cousson
• [PATCH v3 0/4] ARM: OMAP2+: Interrupt controllers adaptation to DT   Benoit Cousson
• [PATCH v3 1/4] arm/dts: OMAP4: Update DTS file with new GIC bindings   Benoit Cousson
• [PATCH v3 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Benoit Cousson
• [PATCH v3 3/4] arm/dts: OMAP3: Add interrupt-controller bindings for INTC   Benoit Cousson
• [PATCH v3 4/4] ARM: OMAP2+: board-generic: Use of_irq_init API   Benoit Cousson
• [PATCH v3 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Cousson, Benoit
• [PATCH 1/4] ARM: OMAP2+: board-generic: Remove un-needed .atag_offset for DT_MACHINE   Cousson, Benoit
• [PATCH v3 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Cousson, Benoit
• [PATCH 0/5] gpio/omap: Cleanup and adaptation to Device Tree   Benoit Cousson
• [PATCH 1/5] gpio/omap: Remove bank->id information and misc cleanup   Benoit Cousson
• [PATCH 2/5] gpio/omap: Use devm_ API and add request_mem_region   Benoit Cousson
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Benoit Cousson
• [PATCH 4/5] arm/dts: OMAP4: Add gpio nodes   Benoit Cousson
• [PATCH 5/5] arm/dts: OMAP3: Add gpio nodes   Benoit Cousson
• [PATCH 0/4] spi/omap: Adaptation to Device Tree   Benoit Cousson
• [PATCH 1/4] spi/omap: Add DT support to McSPI driver   Benoit Cousson
• [PATCH 2/4] arm/dts: OMAP4: Add SPI controller nodes   Benoit Cousson
• [PATCH 3/4] arm/dts: OMAP3: Add SPI controller nodes   Benoit Cousson
• [PATCH 4/4] arm/dts: omap4-sdp: Add ks8851 ethernet SPI device   Benoit Cousson
• [PATCH 2/4] arm/dts: OMAP4: Add SPI controller nodes   Cousson, Benoit
• [PATCH 1/4] spi/omap: Add DT support to McSPI driver   Cousson, Benoit
• [PATCH 2/5] gpio/omap: Use devm_ API and add request_mem_region   Cousson, Benoit
• [PATCH 1/5] gpio/omap: Remove bank->id information and misc cleanup   Cousson, Benoit
• [PATCH 1/4] ARM: OMAP2+: board-generic: Remove un-needed .atag_offset for DT_MACHINE   Cousson, Benoit
• [PATCH 2/3] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins   Cousson, Benoit
• [PATCH v5 08/27] irq_domain: Move irq_domain code from powerpc to kernel/irq   Cousson, Benoit
• [PATCH v5 08/27] irq_domain: Move irq_domain code from powerpc to kernel/irq   Cousson, Benoit
• [GIT PULL] ARM: OMAP: Miscellaneous DT cleanup for 3.4   Cousson, Benoit
• [PATCH] ARM: OMAP2+: hwmod: Add new sysc_type3 into omap_hwmod required for am33xx   Cousson, Benoit
• [PATCH] ARM: OMAP2+: hwmod: Fix wrong SYSC_TYPE1_XXX_MASK bit definitions   Cousson, Benoit
• [PATCHv9 3/5] arm: omap3: add common twl configurations for vdd1 and vdd2   Cousson, Benoit
• [PATCH] ARM: OMAP: hsmmc: add max_freq field   Cousson, Benoit
• [PATCH v5 00/27] irq_domain generalization and rework   Cousson, Benoit
• [PATCH 2/3] tty: serial: OMAP: block idle while the UART is transferring data in PIO mode   Cousson, Benoit
• [PATCH v5 00/27] irq_domain generalization and rework   Cousson, Benoit
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Cousson, Benoit
• [RFC PATCH 1/2] of: Add generic device tree DMA helpers   Cousson, Benoit
• [RFC PATCH 1/2] of: Add generic device tree DMA helpers   Cousson, Benoit
• [PATCH 5/6] ARM: OMAP4: suspend: Do not get dsp/tesla out of reset   Cousson, Benoit
• [PATCH 0/5] ARM: OMAP: Fix SPARSE_IRQ on OMAP4 - Episode I   Benoit Cousson
• [PATCH 1/5] ARM: OMAP2+: l3_noc: Remove references to static IRQ defines   Benoit Cousson
• [PATCH 2/5] ARM: OMAP: irqs: Delete irqs-44xx.h file   Benoit Cousson
• [PATCH 3/5] ARM: OMAP2+: wakeupgen: Fix wrong array size for irq_target_cpu   Benoit Cousson
• [PATCH 4/5] ARM: OMAP2+: gpmc: Use irq_alloc_descs instead of static IRQ range   Benoit Cousson
• [PATCH 5/5] ARM: OMAP: irqs: Set NR_IRQS to NR_IRQS_LEGACY for CONFIG_SPARSE_IRQ   Benoit Cousson
• [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ   Cousson, Benoit
• [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ   Cousson, Benoit
• [PATCH v2 4/4] arm/dts: OMAP3: Add mmc controller nodes and board data   Cousson, Benoit
• [PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree   Cousson, Benoit
• [PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree   Cousson, Benoit
• [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ   Cousson, Benoit
• [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ   Cousson, Benoit
• [PATCH 2/3] tty: serial: OMAP: block idle while the UART is transferring data in PIO mode   Cousson, Benoit
• [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ   Cousson, Benoit
• [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ   Cousson, Benoit
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Cousson, Benoit
• [GIT PULL] ARM: OMAP: DTS updates   Cousson, Benoit
• [PATCH v2 0/6] gpio/omap: Cleanup and adaptation to Device Tree   Benoit Cousson
• [PATCH v2 1/6] gpio/omap: Remove bank->id information and misc cleanup   Benoit Cousson
• [PATCH v2 2/6] gpio/omap: Use devm_ API and add request_mem_region   Benoit Cousson
• [PATCH v2 3/6] gpio/omap: Add DT support to GPIO driver   Benoit Cousson
• [PATCH v2 4/6] gpio/omap: Fix IRQ handling for SPARSE_IRQ   Benoit Cousson
• [PATCH v2 5/6] arm/dts: OMAP4: Add gpio nodes   Benoit Cousson
• [PATCH v2 6/6] arm/dts: OMAP3: Add gpio nodes   Benoit Cousson
• [PATCH v3 0/2] Device tree support for TWL regulators   Cousson, Benoit
• [PATCH v3 0/2] Device tree support for TWL regulators   Cousson, Benoit
• [RFC PATCH 1/2] of: Add generic device tree DMA helpers   Cousson, Benoit
• [GIT PULL] ARM: OMAP: IRQ domain support for INTC   Cousson, Benoit
• [PATCH v3 0/2] Device tree support for TWL regulators   Cousson, Benoit
• [PATCH v2 0/6] gpio/omap: Cleanup and adaptation to Device Tree   Cousson, Benoit
• [PATCH] ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts   Cousson, Benoit
• [PATCH] tty: serial: OMAP: Fix oops due to NULL pdata in DT boot   Cousson, Benoit
• [PATCH] ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts   Cousson, Benoit
• [PATCH v2 0/5] spi/omap: Adaptation to Device Tree   Benoit Cousson
• [PATCH v2 1/5] spi/omap: Remove bus_num usage for instance index   Benoit Cousson
• [PATCH v2 2/5] spi/omap: Add DT support to McSPI driver   Benoit Cousson
• [PATCH v2 3/5] arm/dts: OMAP4: Add SPI controller nodes   Benoit Cousson
• [PATCH v2 4/5] arm/dts: OMAP3: Add SPI controller nodes   Benoit Cousson
• [PATCH v2 5/5] arm/dts: omap4-sdp: Add ks8851 ethernet SPI device   Benoit Cousson
• [PATCH v2 1/5] spi/omap: Remove bus_num usage for instance index   Cousson, Benoit
• [GIT PULL] ARM: OMAP: IRQ domain support for INTC   Cousson, Benoit
• [PATCH-V1] arm/dts: Add support for TI OMAP3 EVM board   Cousson, Benoit
• [PATCH v2 1/4] ARM: local timers: Add A15 architected timer support   Christopher Covington
• [PATCH v2 3/4] ARM: architected timers: add DT support   Christopher Covington
• [PATCH v2 4/4] ARM: architected timers: add support for UP timer   Christopher Covington
• [linux-pm] [PATCH 0/3] coupled cpuidle state support   Colin Cross
• [PATCH v2 8/8] ARM: tegra: support for secondary cores on Tegra30   Colin Cross
• [linux-pm] [PATCH 0/3] coupled cpuidle state support   Colin Cross
• [RFC PATCH v4 1/4] cpuidle: Add time keeping and irq enabling   Colin Cross
• [RFC PATCH v4 1/4] cpuidle: Add time keeping and irq enabling   Colin Cross
• [RFC] ARM: cache-l2x0.c   Colin Cross
• [PATCH v3 05/10] ARM: tegra: rework Tegra secondary CPU core bringup   Colin Cross
• [PATCH v3 02/10] ARM: tegra: export Tegra chipid   Colin Cross
• [PATCH v3 02/10] ARM: tegra: export Tegra chipid   Colin Cross
• [RFC PATCH v4 0/4] Consolidate cpuidle timekeeping and irq enabling   Colin Cross
• [PATCH RFC] OMAP: serial: Remove the hardcode serial_omap_console_ports array.   Shubhrajyoti D
• [PATCH RFC] OMAP: serial: Release the claimed memory region in remove   Shubhrajyoti D
• [PATCH 00/10] I2C updates   Shubhrajyoti D
• [PATCH 01/10] I2C : OMAP : make omap_i2c_unidle/idle functions depend on CONFIG_PM_RUNTIME   Shubhrajyoti D
• [PATCH 02/10] OMAP : I2C : Remove reset at init   Shubhrajyoti D
• [PATCH 03/10] I2C: OMAP: Recover from Bus Busy condition   Shubhrajyoti D
• [PATCH 04/10] OMAP: I2C: I2C register restore only if context is lost   Shubhrajyoti D
• [PATCH 05/10] OMAP: I2C: Fix the interrupt clearing in OMAP4   Shubhrajyoti D
• [PATCH 06/10] OMAP: I2C: Fix the mismatch of pm_runtime enable and disable   Shubhrajyoti D
• [PATCH 07/10] OMAP: I2C: add devexit to the remove code   Shubhrajyoti D
• [PATCH 08/10] OMAP: I2C: Fix the error handling   Shubhrajyoti D
• [PATCH 09/10] I2C: OMAP: Correct I2C revision for OMAP3   Shubhrajyoti D
• [PATCH 10/10] I2C: OMAP: Don't check if wait_for_completion_timeout() returns less than zero   Shubhrajyoti D
• [PATCH] OMAP: serial: Release the claimed memory region in remove   Shubhrajyoti D
• [PATCH 08/15] mm: mmzone: MIGRATE_CMA migration type added   Hillf Danton
• [PATCH 08/15] mm: mmzone: MIGRATE_CMA migration type added   Hillf Danton
• [PATCH 12/15] drivers: add Contiguous Memory Allocator   Hillf Danton
• [PATCH 05/15] mm: compaction: export some of the functions   Hillf Danton
• [PATCH 05/15] mm: compaction: export some of the functions   Hillf Danton
• [PATCH 12/15] drivers: add Contiguous Memory Allocator   Hillf Danton
• [PATCH RFC] OMAP: serial: Release the claimed memory region in remove   Datta, Shubhrajyoti
• [PATCH v6] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Shubhrajyoti Datta
• [PATCH] mtd: omap2: Release memory region in .remove function   Shubhrajyoti Datta
• [PATCH 5/9] ARM: EXYNOS: add board file for SMDK5250   Will Deacon
• [PATCH v2 3/8] ARM: tegra: rework Tegra secondary CPU core bringup   Will Deacon
• [PATCH 0/2] Errata workaround updates   Will Deacon
• [PATCH 1/2] ARM: errata: update workaround for A9 erratum #743622   Will Deacon
• [PATCH 2/2] ARM: errata: fix PL310 erratum #753970 workaround selection   Will Deacon
• [PATCH v3 0/2] Remaining VFP fixes   Will Deacon
• [PATCH v3 1/2] ARM: vfp: move user vfp state save/restore code out of signal.c   Will Deacon
• [PATCH v3 2/2] ARM: vfp: clear fpscr length and stride bits on entry to sig handler   Will Deacon
• [PATCH 0/2] Errata workaround updates   Will Deacon
• [PATCH v2] ARM: hotplug: copy the affinity mask when forcefully migrating IRQs   Will Deacon
• [PATCH v3 2/2] ARM: vfp: clear fpscr length and stride bits on entry to sig handler   Will Deacon
• oprofile and ARM A9 hardware counter   Will Deacon
• [PATCH v6 13/15] ARM: hotplug: Introduce dummy_cpu_kill   Will Deacon
• oprofile and ARM A9 hardware counter   Will Deacon
• [PATCH] ARM: ptrace: Include linux/audit.h to fix build errors   Will Deacon
• [PATCH] ARM: ptrace: Include linux/audit.h to fix build errors   Will Deacon
• oprofile and ARM A9 hardware counter   Will Deacon
• oprofile and ARM A9 hardware counter   Will Deacon
• oprofile and ARM A9 hardware counter   Will Deacon
• oprofile and ARM A9 hardware counter   Will Deacon
• [PATCH] ARM: perf: limit sample_period to half max_period in non-sampling mode   Will Deacon
• [PATCH] ARM: perf: limit sample_period to half max_period in non-sampling mode   Will Deacon
• ARM tracehook support   Will Deacon
• [PATCH] ARM: ptrace: fix ptrace_read_user for !CONFIG_MMU platforms   Will Deacon
• [PATCH] ARM: ptrace: fix ptrace_read_user for !CONFIG_MMU platforms   Will Deacon
• [PATCH] ARM: ptrace: fix ptrace_read_user for !CONFIG_MMU platforms   Will Deacon
• [PATCH - linux-next] ARM: ptrace: Fix audit caused compile error   Will Deacon
• [PATCH] ARM: ptrace: fix ptrace_read_user for !CONFIG_MMU platforms   Will Deacon
• [PATCH] ARM: perf: do not handle deleted counter in irq handler to avoid oops   Will Deacon
• [PATCH 1/2] ARM: perf: clear overflow flag when disabling counter on ARMv7 PMU   Will Deacon
• [PATCH 2/2] ARM: perf: check that we have an event in the PMU IRQ handlers   Will Deacon
• [PATCH] ARM/audit: use correct arch on audit_syscall_enter   Will Deacon
• [PATCH] ARM: perf: do not handle deleted counter in irq handler to avoid oops   Will Deacon
• [PATCH] ARM: perf: do not handle deleted counter in irq handler to avoid oops   Will Deacon
• [PATCH] ARM: perf: do not handle deleted counter in irq handler to avoid oops   Will Deacon
• ARM tracehook support   Will Deacon
• [PATCH] ARM: perf: do not handle deleted counter in irq handler to avoid oops   Will Deacon
• [PATCH v2] ARM: vectors: use gate_vma for vectors user mapping   Will Deacon
• [PATCH v4 1/2] ARM: vfp: move user vfp state save/restore code out of signal.c   Will Deacon
• [PATCH v4 2/2] ARM: vfp: clear fpscr length and stride bits on entry to sig handler   Will Deacon
• [RFC PATCH] ARM: kexec: call platform_cpu_kill on the killer rather than the victim   Will Deacon
• [PATCH] ARM: perf: add PMU hotplug notifier   Will Deacon
• [PATCH 0/4] perf IRQ fixes   Will Deacon
• [PATCH 1/4] ARM: perf: limit sample_period to half max_period in non-sampling mode   Will Deacon
• [PATCH 2/4] ARM: perf: clear overflow flag when disabling counter on ARMv7 PMU   Will Deacon
• [PATCH 3/4] ARM: perf: check that we have an event in the PMU IRQ handlers   Will Deacon
• [PATCH 4/4] ARM: perf: fix overflow handling for xscale2 PMUs   Will Deacon
• [PATCH] ARM: perf: add PMU hotplug notifier   Will Deacon
• [GIT PULL] Versatile Express DT support   Will Deacon
• [PATCH 3/4] ARM: perf: check that we have an event in the PMU IRQ handlers   Will Deacon
• [PATCH 1/3] ARM: add support for the generic syscall.h interface   Will Deacon
• [PATCH 3/3] ARM: support syscall tracing   Will Deacon
• [PATCH] ARM: ptrace: fix ptrace_read_user for !CONFIG_MMU platforms   Will Deacon
• [PATCH 3/4] ARM: perf: check that we have an event in the PMU IRQ handlers   Will Deacon
• [PATCH 3/4] ARM: perf: check that we have an event in the PMU IRQ handlers   Will Deacon
• [PATCH v2 0/3] ARM support for syscall tracing   Will Deacon
• [PATCH] ARM: ptrace: fix ptrace_read_user for !CONFIG_MMU platforms   Will Deacon
• [PATCH v9 00/25] gpio/omap: driver cleanup and fixes   Tarun Kanti DebBarma
• [PATCH v9 01/25] gpio/omap: remove dependency on gpio_bank_count   Tarun Kanti DebBarma
• [PATCH v9 02/25] gpio/omap: use flag to identify wakeup domain   Tarun Kanti DebBarma
• [PATCH v9 03/25] gpio/omap: make gpio_context part of gpio_bank structure   Tarun Kanti DebBarma
• [PATCH v9 04/25] gpio/omap: handle save/restore context in GPIO driver   Tarun Kanti DebBarma
• [PATCH v9 05/25] gpio/omap: make non-wakeup GPIO part of pdata   Tarun Kanti DebBarma
• [PATCH v9 06/25] gpio/omap: avoid cpu checks during module ena/disable   Tarun Kanti DebBarma
• [PATCH v9 07/25] gpio/omap: further cleanup using wkup_en register   Tarun Kanti DebBarma
• [PATCH v9 08/25] gpio/omap: use level/edge detect reg offsets   Tarun Kanti DebBarma
• [PATCH v9 09/25] gpio/omap: remove hardcoded offsets in context save/restore   Tarun Kanti DebBarma
• [PATCH v9 10/25] gpio/omap: cleanup set_gpio_triggering function   Tarun Kanti DebBarma
• [PATCH v9 11/25] gpio/omap: cleanup omap_gpio_mod_init function   Tarun Kanti DebBarma
• [PATCH v9 12/25] gpio/omap: use pinctrl offset instead of macro   Tarun Kanti DebBarma
• [PATCH v9 13/25] gpio/omap: remove unnecessary bit-masking for read access   Tarun Kanti DebBarma
• [PATCH v9 14/25] gpio/omap: remove bank->method & METHOD_* macros   Tarun Kanti DebBarma
• [PATCH v9 15/25] gpio/omap: fix bankwidth for OMAP7xx MPUIO   Tarun Kanti DebBarma
• [PATCH v9 16/25] gpio/omap: use pm-runtime framework   Tarun Kanti DebBarma
• [PATCH v9 17/25] gpio/omap: optimize suspend and resume functions   Tarun Kanti DebBarma
• [PATCH v9 18/25] gpio/omap: cleanup prepare_for_idle and resume_after_idle   Tarun Kanti DebBarma
• [PATCH v9 19/25] gpio/omap: fix debounce clock handling   Tarun Kanti DebBarma
• [PATCH v9 20/25] gpio/omap: fix incorrect access of debounce module   Tarun Kanti DebBarma
• [PATCH v9 21/25] gpio/omap: remove omap_gpio_save_context overhead   Tarun Kanti DebBarma
• [PATCH v9 22/25] gpio/omap: save and restore debounce registers   Tarun Kanti DebBarma
• [PATCH v9 23/25] gpio/omap: enable irq at the end of all configuration in restore   Tarun Kanti DebBarma
• [PATCH v9 24/25] gpio/omap: restore OE only after setting the output level   Tarun Kanti DebBarma
• [PATCH v9 25/25] gpio/omap: handle set_dataout reg capable IP on restore   Tarun Kanti DebBarma
• [PATCH v9 00/25] gpio/omap: driver cleanup and fixes   DebBarma, Tarun Kanti
• [PATCH v9 00/25] gpio/omap: driver cleanup and fixes   DebBarma, Tarun Kanti
• [PATCH 2/5] gpio/omap: Use devm_ API and add request_mem_region   DebBarma, Tarun Kanti
• [PATCH 1/5] gpio/omap: Remove bank->id information and misc cleanup   DebBarma, Tarun Kanti
• [PATCH 2/5] gpio/omap: Use devm_ API and add request_mem_region   DebBarma, Tarun Kanti
• [PATCH] gpio/omap: fix wakeups on level-triggered GPIOs   DebBarma, Tarun Kanti
• [PATCH 0/6] gpio/omap: Some more driver cleanup and fixes   Tarun Kanti DebBarma
• [PATCH 1/6] gpio/omap: remove saved_fallingdetect, saved_risingdetect fields   Tarun Kanti DebBarma
• [PATCH 2/6] gpio/omap: remove saved_wakeup field from struct gpio_bank   Tarun Kanti DebBarma
• [PATCH 3/6] gpio/omap: remove suspend_wakeup field from struct gpio_bank   Tarun Kanti DebBarma
• [PATCH 4/6] gpio/omap: get rid of retrigger variable in gpio_irq_handler   Tarun Kanti DebBarma
• [PATCH 5/6] gpio/omap: fix trigger type to unsigned   Tarun Kanti DebBarma
• [PATCH 6/6] gpio/omap: fix _set_gpio_irqenable implementation   Tarun Kanti DebBarma
• [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ   DebBarma, Tarun Kanti
• [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ   DebBarma, Tarun Kanti
• [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ   DebBarma, Tarun Kanti
• [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ   DebBarma, Tarun Kanti
• [PATCH 2/6] gpio/omap: remove saved_wakeup field from struct gpio_bank   DebBarma, Tarun Kanti
• [PATCH 4/6] gpio/omap: get rid of retrigger variable in gpio_irq_handler   DebBarma, Tarun Kanti
• [PATCH 3/6] gpio/omap: remove suspend_wakeup field from struct gpio_bank   DebBarma, Tarun Kanti
• [PATCH 3/6] gpio/omap: remove suspend_wakeup field from struct gpio_bank   DebBarma, Tarun Kanti
• [PATCH 3/6] gpio/omap: remove suspend_wakeup field from struct gpio_bank   DebBarma, Tarun Kanti
• [PATCH v2 0/9] gpio/omap: Some more driver cleanup and fixes   Tarun Kanti DebBarma
• [PATCH v2 1/9] gpio/omap: remove saved_fallingdetect, saved_risingdetect fields   Tarun Kanti DebBarma
• [PATCH v2 2/9] gpio/omap: fix wakeup_en register update in _set_gpio_wakeup()   Tarun Kanti DebBarma
• [PATCH v2 3/9] gpio/omap: remove suspend_wakeup field from struct gpio_bank   Tarun Kanti DebBarma
• [PATCH v2 4/9] gpio/omap: remove saved_wakeup field from struct gpio_bank   Tarun Kanti DebBarma
• [PATCH v2 5/9] gpio/omap: get rid of retrigger variable in gpio_irq_handler   Tarun Kanti DebBarma
• [PATCH v2 6/9] gpio/omap: fix trigger type to unsigned   Tarun Kanti DebBarma
• [PATCH v2 7/9] gpio/omap: fix _set_gpio_irqenable implementation   Tarun Kanti DebBarma
• [PATCH v2 8/9] gpio/omap: remove redundant decoding of gpio offset   Tarun Kanti DebBarma
• [PATCH v2 9/9] gpio/omap: remove suspend/resume callbacks   Tarun Kanti DebBarma
• [PATCH 1/4] i2c/gpio-i2c add: add DT support   Jean Delvare
• [PATCH 1/4 v2] i2c/gpio: add DT support   Jean Delvare
• [PATCH] mmc: atmel-mci: save and restore sdioirq when soft reset is performed   Ludovic Desroches
• How to deal with a PHY configuration related to the board?   Ludovic Desroches
• How to deal with a PHY configuration related to the board?   Ludovic Desroches
• atmel-mci causing oops?   Ludovic Desroches
• [PATCH v6 1/9] cpuidle: Add common time keeping and irq enabling   Deepthi Dharwar
• [PATCH v7 1/9] cpuidle: Add common time keeping and irq enabling   Deepthi Dharwar
• [PATCH 1/4 v2] i2c/gpio: add DT support   Ben Dooks
• [PATCH 1/4] i2c/gpio-i2c add: add DT support   Ben Dooks
• [RFC PATCH 5/7] ARM: davinci: i2c: add OF support   Ben Dooks
• [PATCH 16/18] Atmel: move console default platform_device to serial driver   Hans-Christian Egtvedt
• [PATCH 2/6] ARM: OMAP4 PM: Add IO Daisychain support   Elaidi, Djamil
• [PATCHv22 00/16] Contiguous Memory Allocator   Anca Emanuel
• [PATCH v2 4/9] ARM: dts: imx6q-sabrelite: add sgtl5000 audio codec   Fabio Estevam
• [PATCH v2 4/9] ARM: dts: imx6q-sabrelite: add sgtl5000 audio codec   Fabio Estevam
• [PATCH v2 1/2] ARM: mx3: Let mx31 and mx35 share the same CCM header file   Fabio Estevam
• [PATCH v2 2/2] ARM: mx3: Let mx31 and mx35 enter in LPM mode in WFI   Fabio Estevam
• [PATCH v2 2/2] ARM: mx3: Let mx31 and mx35 enter in LPM mode in WFI   Fabio Estevam
• [PATCH] arm/imx6: Rename DEBUG_IMX6Q_UART to UART4   Fabio Estevam
• [PATCH] arm/imx6: Rename DEBUG_IMX6Q_UART to UART4   Fabio Estevam
• [GIT PULL] i.MX fixes for -rc   Fabio Estevam
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Fabio Estevam
• [PATCH RESEND] FEC: Rename dev to ndev, fix compile error   Fabio Estevam
• [PATCH] EHCI: Fix clk_enable/clk_disable for ehci-mxc usb clock   Fabio Estevam
• [alsa-devel] [RFC PATCH] ARM ASoC: add sound driver for imx27pdk using mc13783 codec   Fabio Estevam
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Fabio Estevam
• [PATCH] mtd/gpmi : add gpmi support for mx6q   Fabio Estevam
• [PATCH] ARM: imx_v6_v7_defconfig: Add support for framebuffer and camera on mx31   Fabio Estevam
• [PATCH] ARM: mach-pcm038: Fix field name of regulator_consumer_supply struct   Fabio Estevam
• [PATCH 1/2] ARM: mx27_3ds: Add camera support   Fabio Estevam
• [PATCH 2/2] ARM: imx_v4_v5_defconfig: Update defconfig   Fabio Estevam
• [PATCH v2 5/7] ARM: imx: eliminate macro IRQ_GPIOx()   Fabio Estevam
• [PATCH] ARM: plat-mxc: audmux-v1: Remove unneeded ifdef's   Fabio Estevam
• [PATCH v2] ARM: plat-mxc: audmux-v1: Remove unneeded ifdef's   Fabio Estevam
• [GIT PULL] i.MX assorted   Fabio Estevam
• ARM: __enabled_CONFIG_NUMA undeclared   Fabio Estevam
• [PATCH] i.MX31: mxc-rnga: implement waiting for data in driver   Fabio Estevam
• [PATCH] ARM: mach-imx: mx3: Fix section mismatch in imx3_init_l2x0()   Fabio Estevam
• [PATCH] ARM: mx3: Setup AIPS registers   Fabio Estevam
• [PATCH] ARM: mx51: Fix build error due to missing include of <linux/bug.h>   Fabio Estevam
• [PATCH v2] ARM: mx3: Setup AIPS registers   Fabio Estevam
• [PATCH v2 2/2] ARM: mx3: Let mx31 and mx35 enter in LPM mode in WFI   Fabio Estevam
• [PATCH] ARM: mx51: Fix build error due to missing include of <linux/bug.h>   Fabio Estevam
• [PATCH] ARM: mx51: Fix build error due to missing include of <linux/bug.h>   Fabio Estevam
• [PATCH v3] ARM: mx3: Setup AIPS registers   Fabio Estevam
• Kirkwood, kernel 3.2, vmalloc region overlap, not starting up   Nils Faerber
• Kirkwood, kernel 3.2, vmalloc region overlap, not starting up   Nils Faerber
• Kirkwood, kernel 3.2, vmalloc region overlap, not starting up   Nils Faerber
• [PATCH] mtd: fix the wrong check condition   Florian Fainelli
• [PATCH] mtd : change the location of the ONFI detected log   Florian Fainelli
• [PATCH] mtd: fix the wrong check condition   Florian Fainelli
• ARM tracehook support   Wade Farnsworth
• ARM tracehook support   Wade Farnsworth
• ARM tracehook support   Wade Farnsworth
• ARM tracehook support   Wade Farnsworth
• [PATCH 0/3] ARM support for syscall tracing   Wade Farnsworth
• [PATCH 1/3] ARM: add support for the generic syscall.h interface   Wade Farnsworth
• [PATCH 2/3] ARM: add TRACEHOOK support   Wade Farnsworth
• [PATCH 3/3] ARM: support syscall tracing   Wade Farnsworth
• [PATCH 1/3] ARM: add support for the generic syscall.h interface   Wade Farnsworth
• [PATCH 3/3] ARM: support syscall tracing   Wade Farnsworth
• [PATCH v2 0/3] ARM support for syscall tracing   Wade Farnsworth
• [PATCH v2 1/3] ARM: add support for the generic syscall.h interface   Wade Farnsworth
• [PATCH v2 2/3] ARM: add TRACEHOOK support   Wade Farnsworth
• [PATCH v2 3/3] ARM: support syscall tracing   Wade Farnsworth
• [GIT PULL] at91: base for 3.4 development (aka CAP9 removal)   Nicolas Ferre
• [GIT PULL] at91: pm cleanup for standby   Nicolas Ferre
• [GIT PULL] at91: devices and boards files update for 3.4   Nicolas Ferre
• [GIT PULL] at91: at91sam9x5 family basic support   Nicolas Ferre
• [PATCH 3/3] ARM: remove empty disable_fiq and arch_ret_to_user macros   Nicolas Ferre
• [PATCH 5/6 V2] atmel/nand: add DT support   Nicolas Ferre
• [PATCH v3 24/25] irq_domain: remove "hint" when allocating irq numbers   Nicolas Ferre
• [RFC PATCH] ARM: at91/aic: add irq domain and device tree support   Nicolas Ferre
• ARM/ARM-SoC plans for v3.4 merge window   Nicolas Ferre
• [PATCH] mmc: atmel-mci: save and restore sdioirq when soft reset is performed   Nicolas Ferre
• [PATCH 1/1] gpio: drop CONFIG_OF_GPIO in the definition of the struct gpio_chip   Nicolas Ferre
• [PATCH 0/9] ARM: at91: irqdomain and device tree for AIC and GPIO   Nicolas Ferre
• [PATCH v5 1/9] ARM: at91/aic: add irq domain and device tree support   Nicolas Ferre
• [PATCH 2/9] ARM: at91/snapper9260: move gpio_to_irq out of structure initialization   Nicolas Ferre
• [PATCH 3/9] ARM/USB: at91/ohci-at91: remove the use of irq_to_gpio   Nicolas Ferre
• [PATCH 4/9] ARM: at91/gpio: change comments and one variable name   Nicolas Ferre
• [PATCH v5 5/9] ARM: at91/gpio: add irqdomain and DT support   Nicolas Ferre
• [PATCH 6/9] ARM: at91/gpio: non-DT builds do not have gpio_chip.of_node field   Nicolas Ferre
• [PATCH 7/9] ARM: at91/gpio: add .to_irq gpio_chip handler   Nicolas Ferre
• [PATCH 8/9] ARM: at91/gpio: remove the static specification of gpio_chip.base   Nicolas Ferre
• [PATCH 9/9] ARM: at91/board-dt: remove AIC irq domain from board file   Nicolas Ferre
• [PATCH 1/1] gpio: drop CONFIG_OF_GPIO in the definition of the struct gpio_chip   Nicolas Ferre
• [GIT PULL] at91: fixes for 3.3-rc4   Nicolas Ferre
• [PATCH 2/9] ARM: at91/snapper9260: move gpio_to_irq out of structure initialization   Nicolas Ferre
• [PATCH 07/15] ARM: at91: clean-up mach/io.h   Nicolas Ferre
• [PATCH v5 1/9] ARM: at91/aic: add irq domain and device tree support   Nicolas Ferre
• How to deal with a PHY configuration related to the board?   Nicolas Ferre
• [PATCH v3 24/25] irq_domain: remove "hint" when allocating irq numbers   Nicolas Ferre
• [PATCH v3 25/25] irq_domain: mostly eliminate slow-path revmap lookups   Nicolas Ferre
• [PATCH v5 1/9] ARM: at91/aic: add irq domain and device tree support   Nicolas Ferre
• [PATCH] ARM: at91: AIC and GPIO IRQ device tree initilization   Nicolas Ferre
• [PATCH 3/9] ARM/USB: at91/ohci-at91: remove the use of irq_to_gpio   Nicolas Ferre
• [PATCH] MAINTAINERS: hand over atmel-mci (sd/mmc interface)   Nicolas Ferre
• [GIT PULL] at91 mmc fixes for 3.3-rc[45]   Nicolas Ferre
• [PATCH 00/18] at91 first cleanup series for 3.4   Nicolas Ferre
• [PATCH 01/18] ARM: at91: factorise duplicated at91sam9 idle   Nicolas Ferre
• [PATCH 02/18] ARM: at91/at91x40: remove use of at91_sys_read/write   Nicolas Ferre
• [PATCH 03/18] ARM: at91: make matrix register base soc independent   Nicolas Ferre
• [PATCH 04/18] ARM: at91: make ST (System Timer) soc independent   Nicolas Ferre
• [PATCH 05/18] ARM: at91/pm_slowclock: rename register to named define   Nicolas Ferre
• [PATCH 06/18] ARM: at91/pm_slowclock: function slow_clock() accepts parameters   Nicolas Ferre
• [PATCH 07/18] ARM: at91: move at91rm9200 sdramc defines to at91rm9200_sdramc.h   Nicolas Ferre
• [PATCH 08/18] ARM: at91: make sdram/ddr register base soc independent   Nicolas Ferre
• [PATCH 09/18] ARM: at91/pm_slowclock: add runtime detection of memory contoller   Nicolas Ferre
• [PATCH 10/18] ARM: at91/PMC: make register base soc independent   Nicolas Ferre
• [PATCH 11/18] ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use   Nicolas Ferre
• [PATCH 12/18] ARM: at91:rtc/rtc-at91sam9: ioremap register bank   Nicolas Ferre
• [PATCH 13/18] ARM: at91/rtc-at91sam9: pass the GPBR to use via ressources   Nicolas Ferre
• [PATCH 14/18] ARM: at91: finally drop at91_sys_read/write   Nicolas Ferre
• [PATCH 15/18] ARM: at91: merge SRAM Memory banks thanks to mirroring   Nicolas Ferre
• [PATCH 16/18] Atmel: move console default platform_device to serial driver   Nicolas Ferre
• [PATCH 17/18] ARM: at91/board-dt: drop default console   Nicolas Ferre
• [PATCH 18/18] ARM: at91/board-dt: move at91_initialize() to init_irq()   Nicolas Ferre
• [PATCH 13/18] ARM: at91/rtc-at91sam9: pass the GPBR to use via ressources   Nicolas Ferre
• [PATCH] ARM: at91/rtc-at91sam9: rework resources assignment   Nicolas Ferre
• [PATCH 5/6 V2] atmel/nand: add DT support   Nicolas Ferre
• [PATCH 5/6 V3] atmel/nand: add DT support   Nicolas Ferre
• [PATCH] ARM: at91: AIC and GPIO IRQ device tree initilization   Nicolas Ferre
• [PATCH 0/7] share sa1100 rtc driver to arch-mmp   Nicolas Ferre
• [PATCH] ARM: at91: AIC and GPIO IRQ device tree initilization   Nicolas Ferre
• [PATCH v2 00/19] at91 first cleanup series for 3.4   Nicolas Ferre
• [PATCH v2 01/19] ARM: at91: factorise duplicated at91sam9 idle   Nicolas Ferre
• [PATCH v2 02/19] ARM: at91/at91x40: remove use of at91_sys_read/write   Nicolas Ferre
• [PATCH v2 03/19] ARM: at91: make matrix register base soc independent   Nicolas Ferre
• [PATCH v2 04/19] ARM: at91: make ST (System Timer) soc independent   Nicolas Ferre
• [PATCH v2 05/19] ARM: at91/ST: remove not needed casts   Nicolas Ferre
• [PATCH v2 06/19] ARM: at91/pm_slowclock: rename register to named define   Nicolas Ferre
• [PATCH v2 07/19] ARM: at91/pm_slowclock: function slow_clock() accepts parameters   Nicolas Ferre
• [PATCH v2 08/19] ARM: at91: move at91rm9200 sdramc defines to at91rm9200_sdramc.h   Nicolas Ferre
• [PATCH v2 09/19] ARM: at91: make sdram/ddr register base soc independent   Nicolas Ferre
• [PATCH v2 10/19] ARM: at91/pm_slowclock: add runtime detection of memory contoller   Nicolas Ferre
• [PATCH v2 11/19] ARM: at91/PMC: make register base soc independent   Nicolas Ferre
• [PATCH v2 12/19] ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use   Nicolas Ferre
• [PATCH v2 13/19] ARM: at91:rtc/rtc-at91sam9: ioremap register bank   Nicolas Ferre
• [PATCH v2 14/19] ARM: at91/rtc-at91sam9: pass the GPBR to use via resources   Nicolas Ferre
• [PATCH v2 15/19] ARM: at91: finally drop at91_sys_read/write   Nicolas Ferre
• [PATCH v2 16/19] ARM: at91: merge SRAM Memory banks thanks to mirroring   Nicolas Ferre
• [PATCH v2 17/19] Atmel: move console default platform_device to serial driver   Nicolas Ferre
• [PATCH v2 18/19] ARM: at91/board-dt: drop default console   Nicolas Ferre
• [PATCH v2 19/19] ARM: at91/board-dt: move at91_initialize() to init_irq()   Nicolas Ferre
• [RFC PATCH 1/2] of: Add generic device tree DMA helpers   Nicolas Ferre
• [PATCH v5 1/2] ARM: at91: pit add DT support   Nicolas Ferre
• [PATCH v5 2/2] ARM: at91/pit: add traces in case of error   Nicolas Ferre
• [PATCH] ARM: at91/pio: add new PIO3 features   Nicolas Ferre
• [PATCH 0/2] ARM: at91: two additional patches to cleanup series   Nicolas Ferre
• [PATCH 1/2] ARM: at91: add at91sam9g25ek.dts in Makefile.boot   Nicolas Ferre
• [PATCH 2/2] ARM: at91: properly sort dtb files in Makefile.boot   Nicolas Ferre
• [PATCH v2 11/19] ARM: at91/PMC: make register base soc independent   Nicolas Ferre
• [PATCH v2 09/19] ARM: at91: make sdram/ddr register base soc independent   Nicolas Ferre
• [PATCH v2 09/19] ARM: at91: make sdram/ddr register base soc independent   Nicolas Ferre
• [PATCH v2 09/19] ARM: at91: make sdram/ddr register base soc independent   Nicolas Ferre
• [PATCH v3 00/21] at91 first cleanup series for 3.4   Nicolas Ferre
• [PATCH v3 01/21] ARM: at91: factorise duplicated at91sam9 idle   Nicolas Ferre
• [PATCH v3 02/21] ARM: at91/at91x40: remove use of at91_sys_read/write   Nicolas Ferre
• [PATCH v3 03/21] ARM: at91: make matrix register base soc independent   Nicolas Ferre
• [PATCH v3 04/21] ARM: at91: make ST (System Timer) soc independent   Nicolas Ferre
• [PATCH v3 05/21] ARM: at91/ST: remove not needed casts   Nicolas Ferre
• [PATCH v3 06/21] ARM: at91/pm_slowclock: rename register to named define   Nicolas Ferre
• [PATCH v3 07/21] ARM: at91/pm_slowclock: function slow_clock() accepts parameters   Nicolas Ferre
• [PATCH v3 08/21] ARM: at91: move at91rm9200 sdramc defines to at91rm9200_sdramc.h   Nicolas Ferre
• [PATCH v3 09/21] ARM: at91: make sdram/ddr register base soc independent   Nicolas Ferre
• [PATCH v3 10/21] ARM: at91/pm_slowclock: add runtime detection of memory contoller   Nicolas Ferre
• [PATCH v3 11/21] ARM: at91/PMC: move assignment out of printf   Nicolas Ferre
• [PATCH v3 12/21] ARM: at91/PMC: make register base soc independent   Nicolas Ferre
• [PATCH v3 13/21] ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use   Nicolas Ferre
• [PATCH v3 14/21] ARM: at91:rtc/rtc-at91sam9: ioremap register bank   Nicolas Ferre
• [PATCH v3 15/21] ARM: at91/rtc-at91sam9: pass the GPBR to use via resources   Nicolas Ferre
• [PATCH v3 16/21] ARM: at91: finally drop at91_sys_read/write   Nicolas Ferre
• [PATCH v3 17/21] ARM: at91: merge SRAM Memory banks thanks to mirroring   Nicolas Ferre
• [PATCH v3 18/21] Atmel: move console default platform_device to serial driver   Nicolas Ferre
• [PATCH v3 19/21] ARM: at91/board-dt: drop default console   Nicolas Ferre
• [PATCH v3 20/21] ARM: at91: add at91sam9g25ek.dts in Makefile.boot   Nicolas Ferre
• [PATCH v3 21/21] ARM: at91: properly sort dtb files in Makefile.boot   Nicolas Ferre
• [RFC PATCH 1/2] of: Add generic device tree DMA helpers   Nicolas Ferre
• [GIT PULL] at91 first cleanup series for 3.4   Nicolas Ferre
• [PATCH 07/15] ARM: at91: clean-up mach/io.h   Nicolas Ferre
• [RFC PATCH 1/2] of: Add generic device tree DMA helpers   Nicolas Ferre
• [GIT PULL] at91: irqdomain and device tree for AIC and GPIO   Nicolas Ferre
• [RFC PATCH 1/2] of: Add generic device tree DMA helpers   Nicolas Ferre
• [GIT PULL] at91 first cleanup series for 3.4   Nicolas Ferre
• [GIT PULL] at91 first cleanup series for 3.4   Nicolas Ferre
• [RFC PATCH] of: DMA helpers: manage generic requests specification   Nicolas Ferre
• [PATCH] ARM: S5P: Can handle edge interrupt handler   Tomasz Figa
• How to deal with a PHY configuration related to the board?   Andy Fleming
• [PATCH 02/40] arm: Use set_current_blocked() and block_sigmask()   Matt Fleming
• Internal timers in deep sleep   Marcus Folkesson
• Internal timers in deep sleep   Marcus Folkesson
• [RFC] ARM: cache-l2x0.c   Per Fransson
• [PATCH 00/16] rmk's patch series for fixing OMAP   Teresa Gamez
• [PATCH v7] ARM: net: JIT compiler for packet filters   Mircea Gherzan
• [PATCH] ARM: OMAP: enable Bluetooth on the PandaBoard   Mircea Gherzan
• [PATCH RESEND] ARM: OMAP: enable Bluetooth on the PandaBoard   Mircea Gherzan
• hex number case in dts files.   David Gibson
• hex number case in dts files.   David Gibson
• [RFC 04/11] ASoC: core - Add API call to register dai kcontrols.   Liam Girdwood
• [PATCH v3 0/3] MFD: twl6040: Conversion to i2c driver   Liam Girdwood
• [PATCH 0/3] arm: tegra: dts: USB Updates for Tegra legacy mode / OTG   Simon Glass
• [PATCH 1/3] arm: tegra: dts: Support host/device selection and legacy mode   Simon Glass
• [PATCH 2/3] arm: tegra: dts: Add legacy mode support to Tegra2x USB1 port   Simon Glass
• [PATCH 3/3] arm: tegra: dts: Mark USB1 as an OTG port on Seaboard   Simon Glass
• [PATCH] genirq: Fix race condition in ONESHOT irq handler   Thomas Gleixner
• [PATCH] genirq: Fix race condition in ONESHOT irq handler   Thomas Gleixner
• [PATCH 02/15] mm: page_alloc: update migrate type of pages on pcp when isolating   Mel Gorman
• [PATCH 02/15] mm: page_alloc: update migrate type of pages on pcp when isolating   Mel Gorman
• [PATCH 03/15] mm: compaction: introduce map_pages()   Mel Gorman
• [PATCH 08/15] mm: mmzone: MIGRATE_CMA migration type added   Mel Gorman
• [PATCH 11/15] mm: trigger page reclaim in alloc_contig_range() to stabilize watermarks   Mel Gorman
• [PATCHv20 00/15] Contiguous Memory Allocator   Mel Gorman
• [PATCH 11/15] mm: trigger page reclaim in alloc_contig_range() to stabilize watermarks   Mel Gorman
• [PATCH] ARM: mx51: Fix build error due to missing include of <linux/bug.h>   Paul Gortmaker
• [PATCH] ARM: boot/compressed/misc.s: Include <linux/bug.h> to fix build break   Paul Gortmaker
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Govindraj
• [PATCH RFC] OMAP: serial: Remove the hardcode serial_omap_console_ports array.   Govindraj
• mfd: mc13xxx adc fixes and enhancements   Robin van der Gracht
• [PATCH] arm: omap3: cm-t35: fix section mismatch warning   Igor Grinberg
• [PATCH] ARM: OMAP: update omap1 and omap2plus defconfigs   Igor Grinberg
• [PATCH] ARM: OMAP: update omap1 and omap2plus defconfigs   Igor Grinberg
• [PATCH v2 5/7] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins   Igor Grinberg
• [PATCH v2 6/7] ARM: OMAP3: Use .teardown of twl4030-gpio to clean board requests   Igor Grinberg
• [PATCH v2 5/7] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins   Igor Grinberg
• ARM: OMAP: patches for stable   Igor Grinberg
• [linux-pm] [PATCH 0/3] coupled cpuidle state support   Vincent Guittot
• [PATCH] ux500 : decouple/recouple gic from the PRCMU   Vincent Guittot
• [PATCH 3/4] cpufreq: New 'interactive' governor   Vincent Guittot
• Pinmux bindings proposal V2   Shawn Guo
• [PATCH] irq_domain: fix the irq number of imx5 tzic   Shawn Guo
• Pinmux bindings proposal V2   Shawn Guo
• [GIT PULL] cs89x0 platform support   Shawn Guo
• [GIT PULL] mxs/defconfig for 3.4   Shawn Guo
• [PATCH v2 9/9] ARM: imx6q-sabrelite: add audmux support   Shawn Guo
• [PATCH v2 9/9] ARM: imx6q-sabrelite: add audmux support   Shawn Guo
• [PATCH v2 6/9] ARM: mx31ads: add audmux device   Shawn Guo
• [PATCH v2 7/9] ARM: mxc: move audmux-v2 to sound/soc/imx   Shawn Guo
• [PATCH v2 6/9] ARM: mx31ads: add audmux device   Shawn Guo
• [PATCH v2 6/9] ARM: mx31ads: add audmux device   Shawn Guo
• [PATCH v2 6/9] ARM: mx31ads: add audmux device   Shawn Guo
• [PATCH v2 6/9] ARM: mx31ads: add audmux device   Shawn Guo
• [PATCH v2 6/9] ARM: mx31ads: add audmux device   Shawn Guo
• [PATCH V2 1/4] pinctrl: add a driver for NVIDIA Tegra   Shawn Guo
• Pinmux bindings proposal V2   Shawn Guo
• [PATCH v2 6/9] ARM: mx31ads: add audmux device   Shawn Guo
• [PATCH v2 6/9] ARM: mx31ads: add audmux device   Shawn Guo
• Pinmux bindings proposal V2   Shawn Guo
• [PATCH v5] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Shawn Guo
• [GIT PULL v2] mxs/boards for v3.4   Shawn Guo
• [PATCH v4 2/4] irq: add irq_domain support to generic-chip   Shawn Guo
• [PATCH v4 3/4] ARM: imx: add irq domain support to tzic   Shawn Guo
• [PATCH 2/2] pinctrl: Add simple pinmux driver using device tree data   Shawn Guo
• [PATCH v4 2/4] irq: add irq_domain support to generic-chip   Shawn Guo
• [PATCH v4 2/4] irq: add irq_domain support to generic-chip   Shawn Guo
• [GIT PULL] mxs/clk for v3.4   Shawn Guo
• [GIT PULL v2] mxs/boards for v3.4   Shawn Guo
• [GIT PULL] mxs/defconfig for 3.4   Shawn Guo
• [GIT PULL] mxs/defconfig for 3.4   Shawn Guo
• [PATCH v6] irq: add irq_domain support to generic-chip   Shawn Guo
• [PATCH v4 4/4] gpio: pl061: enable interrupts with DT style binding   Shawn Guo
• [PATCH v6] irq: add irq_domain support to generic-chip   Shawn Guo
• [PATCH v4 4/4] gpio: pl061: enable interrupts with DT style binding   Shawn Guo
• [PATCH v3 1/2] mxs-dma : move the mxs dma.h to a more common place   Shawn Guo
• [PATCH v4 4/4] gpio: pl061: enable interrupts with DT style binding   Shawn Guo
• [PATCH v6 11/15] ARM: SoC: convert imx6q to SoC descriptor   Shawn Guo
• [PATCH v4 1/2] mfd: Add anatop mfd driver   Shawn Guo
• [PATCH v4 2/2] Regulator: Add Anatop regulator driver   Shawn Guo
• [PATCH v2 4/4] ARM: remove empty disable_fiq and arch_ret_to_user macros   Shawn Guo
• [PATCH v3 1/2] mxs-dma : move the mxs dma.h to a more common place   Shawn Guo
• [PATCH] arm/imx6: Rename DEBUG_IMX6Q_UART to UART4   Shawn Guo
• [PATCH resend v3] ARM: mxs: add GPMI-NAND support for imx23/imx28   Shawn Guo
• [PATCH 0/8] irq_domain for imx tzic and gpio   Shawn Guo
• [PATCH 1/8] irq: choose irq_domain type for generic-chip based on irq_base   Shawn Guo
• [PATCH 2/8] dt: add empty of_find_compatible_node function   Shawn Guo
• [PATCH 3/8] ARM: imx5: adopt generic_chip irq_domain support for tzic   Shawn Guo
• [PATCH 4/8] ARM: imx: eliminate macro IMX_GPIO_TO_IRQ()   Shawn Guo
• [PATCH 5/8] ARM: imx: eliminate macro IOMUX_TO_IRQ()   Shawn Guo
• [PATCH 6/8] ARM: imx: eliminate macro IRQ_GPIOx()   Shawn Guo
• [PATCH 7/8] gpio/mxc: adopt irq_domain for gpio interrupt support   Shawn Guo
• [PATCH 8/8] ARM: imx: remove macro MXC_GPIO_IRQ_START   Shawn Guo
• [PATCH] MAINTAINERS: Update ARM/FREESCALE IMX entry   Shawn Guo
• [PATCH] MAINTAINERS: Update ARM/FREESCALE IMX entry   Shawn Guo
• [PATCH 3/8] ARM: imx5: adopt generic_chip irq_domain support for tzic   Shawn Guo
• [PATCH] MAINTAINERS: remove arch/arm/mach-mx*/ from IMX entry   Shawn Guo
• [PATCH 3/8] ARM: imx5: adopt generic_chip irq_domain support for tzic   Shawn Guo
• [PATCH 3/8] ARM: imx5: adopt generic_chip irq_domain support for tzic   Shawn Guo
• [PATCH] mtd/gpmi : add gpmi support for mx6q   Shawn Guo
• [PATCH v2 0/7] irq_domain for imx tzic and gpio   Shawn Guo
• [PATCH v2 1/7] dt: add empty of_find_compatible_node function   Shawn Guo
• [PATCH v2 2/7] ARM: imx5: adopt generic_chip irq_domain support for tzic   Shawn Guo
• [PATCH v2 3/7] ARM: imx: eliminate macro IMX_GPIO_TO_IRQ()   Shawn Guo
• [PATCH v2 4/7] ARM: imx: eliminate macro IOMUX_TO_IRQ()   Shawn Guo
• [PATCH v2 5/7] ARM: imx: eliminate macro IRQ_GPIOx()   Shawn Guo
• [PATCH v2 6/7] gpio/mxc: adopt irq_domain for gpio interrupt support   Shawn Guo
• [PATCH v2 7/7] ARM: imx: remove macro MXC_GPIO_IRQ_START   Shawn Guo
• [PATCH v5 2/2] mxs-dma : rewrite the last parameter of mxs_dma_prep_slave_sg()   Shawn Guo
• [PATCH v5 1/2] mxs-dma : move the mxs dma.h to a more common place   Shawn Guo
• [PATCH v3 24/25] irq_domain: remove "hint" when allocating irq numbers   Shawn Guo
• [PATCH v2 7/7] ARM: imx: remove macro MXC_GPIO_IRQ_START   Shawn Guo
• [PATCH v2 5/7] ARM: imx: eliminate macro IRQ_GPIOx()   Shawn Guo
• [PATCH 04/15] ARM: imx: convert to common runtime ioremap hook   Shawn Guo
• [PATCH 14/15] ARM: remove bunch of now unused mach/io.h files   Shawn Guo
• [PATCH v5 2/2] mxs-dma : rewrite the last parameter of mxs_dma_prep_slave_sg()   Shawn Guo
• [PATCH] mtd/gpmi : add gpmi support for mx6q   Shawn Guo
• [PATCH] mtd/gpmi : add gpmi support for mx6q   Shawn Guo
• [PATCH v2 2/7] ARM: imx5: adopt generic_chip irq_domain support for tzic   Shawn Guo
• [PATCH v3 24/25] irq_domain: remove "hint" when allocating irq numbers   Shawn Guo
• [GIT PULL] imx irq_domain migration   Shawn Guo
• [GIT PULL] imx irq_domain migration   Shawn Guo
• [PATCH] ARM i.MX5/6: Add dt support for generic boards   Shawn Guo
• [PATCH] ASoC: imx/mxs: remove redundant SND_PCM selection   Shawn Guo
• [PATCH] ARM i.MX5/6: Add dt support for generic boards   Shawn Guo
• [PATCH] ASoC: imx: let SND_MXC_SOC_FIQ select FIQ   Shawn Guo
• [PATCH 1/4] ASoC: imx: let SND_MXC_SOC_FIQ select FIQ   Shawn Guo
• [PATCH 2/4] ASoC: imx: move SND_SOC_AC97_BUS selection down to machine driver   Shawn Guo
• [PATCH 3/4] ASoC: imx: initialize dma_params burstsize just in imx-ssi   Shawn Guo
• [PATCH 4/4] ASoC: imx: separate imx-pcm bits from imx-ssi driver   Shawn Guo
• [PATCH 0/4] ASoC: merge imx into fsl   Shawn Guo
• [PATCH 1/4] ASoC: imx: add an explicit Kconfig option for imx-ssi driver   Shawn Guo
• [PATCH 2/4] ASoC: fsl: separate SSI and DMA Kconfig options   Shawn Guo
• [PATCH 3/4] ASoC: imx: merge sound/soc/imx into sound/soc/fsl   Shawn Guo
• [PATCH 4/4] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Shawn Guo
• [PATCH 1/4] ASoC: imx: add an explicit Kconfig option for imx-ssi driver   Shawn Guo
• [PATCH 1/4] ASoC: imx: add an explicit Kconfig option for imx-ssi driver   Shawn Guo
• [PATCH 0/6] ASoC: a few cleanups on sound/soc/fsl   Shawn Guo
• [PATCH 1/6] ASoC: fsl: correct get_dma_channel parameter name   Shawn Guo
• [PATCH 2/6] ASoC: fsl: align mpc8610_hpcd with p1022_ds on getting codec node   Shawn Guo
• [PATCH 3/6] ASoC: Remove unnecessary -codec from cs4270 driver name   Shawn Guo
• [PATCH 4/6] ASoC: fsl: create fsl_utils to accommodate the common functions   Shawn Guo
• [PATCH 5/6] ASoC: fsl: use platform_device_id table to match p1022_ds device   Shawn Guo
• [PATCH 6/6] ASoC: fsl: check property 'compatible' for the machine name   Shawn Guo
• [PATCH 0/6] ASoC: a few cleanups on sound/soc/fsl   Shawn Guo
• [PATCH 0/6] ASoC: a few cleanups on sound/soc/fsl   Shawn Guo
• [PATCH 6/6] ASoC: fsl: check property 'compatible' for the machine name   Shawn Guo
• [PATCH 0/6] ASoC: a few cleanups on sound/soc/fsl   Shawn Guo
• [PATCH 0/6] ASoC: a few cleanups on sound/soc/fsl   Shawn Guo
• [PATCH 6/6] ASoC: fsl: check property 'compatible' for the machine name   Shawn Guo
• [PATCH 6/6] ASoC: fsl: check property 'compatible' for the machine name   Shawn Guo
• [PATCH 0/6] ASoC: a few cleanups on sound/soc/fsl   Shawn Guo
• [PATCH 6/6] ASoC: fsl: check property 'compatible' for the machine name   Shawn Guo
• [PATCH] ARM: dts: imx51-babbage: update mc13892 device   Shawn Guo
• [PATCH] ARM: defconfig: imx_v6_v7: build in REGULATOR_FIXED_VOLTAGE   Shawn Guo
• [PATCH v2 0/9] imx patches when I enable imx6q sabrelite audio   Shawn Guo
• [PATCH 1/2] ARM: dts: imx6q-arm2: add vmmc-supply for usdhc   Shawn Guo
• [PATCH 2/2] ARM: dts: imx6q-sabrelite: add vmmc-supply for usdhc   Shawn Guo
• [PATCH] ARM i.MX5/6: Add dt support for generic boards   Shawn Guo
• [PATCH] ARM: mach-imx: mx3: Fix section mismatch in imx3_init_l2x0()   Shawn Guo
• [PATCH] ARM: mach-imx: mx3: Fix section mismatch in imx3_init_l2x0()   Shawn Guo
• [PATCH 6/6] ASoC: fsl: check property 'compatible' for the machine name   Shawn Guo
• [PATCH 5/6] ASoC: fsl: use platform_device_id table to match p1022_ds device   Shawn Guo
• [PATCH 4/6] ASoC: fsl: create fsl_utils to accommodate the common functions   Shawn Guo
• [GIT PULL] mxs gpmi for v3.4   Shawn Guo
• [GIT PULL] imx driver for v3.4   Shawn Guo
• [GIT PULL] imx DT changes for v3.4   Shawn Guo
• [GIT PULL] imx_v6_v7_defconfig updates for v3.4   Shawn Guo
• [GIT PULL] MAINTAINERS IMX update for v3.4   Shawn Guo
• [PATCH 6/6] ASoC: fsl: check property 'compatible' for the machine name   Shawn Guo
• [PATCH 6/6] ASoC: fsl: check property 'compatible' for the machine name   Shawn Guo
• In many cases softlockup can not be reported after disabling IRQ for long time   TAO HU
• [RESEND PATCH] davinci: CQ93VC: remove machine specific header file inclusion from codec driver   Hadli, Manjunath
• [PATCH v6 0/5] Introduce External Connector Class (extcon)   MyungJoo Ham
• [PATCH v6 1/5] Extcon (external connector): import Android's switch class and modify.   MyungJoo Ham
• [PATCH v6 2/5] Extcon: support generic GPIO extcon driver   MyungJoo Ham
• [PATCH v6 3/5] Extcon: support notification based on the state changes.   MyungJoo Ham
• [PATCH v6 4/5] Extcon: support multiple states at a device.   MyungJoo Ham
• [PATCH v6 5/5] Extcon: support mutually exclusive relation between cables.   MyungJoo Ham
• [PATCH] video: support DP controller driver   Jingoo Han
• [PATCH 1/2] ARM: EXYNOS: Add EHCI AHB burst function   Jingoo Han
• [PATCH 1/2] ARM: EXYNOS: Add EHCI AHB burst function   Jingoo Han
• [PATCH 1/2] ARM: EXYNOS: Add USB HOST register definitions   Jingoo Han
• [PATCH 2/2] USB: ehci-s5p: add DMA burst support   Jingoo Han
• [PATCH] mmc: mmci: Cleanup code for DMA handling   Ulf Hansson
• [GIT PULL] i.MX clk_prepare/unprepare   Sascha Hauer
• [GIT PULL] cs89x0 platform support   Sascha Hauer
• [GIT PULL] cs89x0 platform support   Sascha Hauer
• [PATCH v2 02/10] pwm: Allow chips to support multiple PWMs.   Sascha Hauer
• [GIT PULL] cs89x0 platform support   Sascha Hauer
• [PATCH 1/2] i.MX DMA: Add support for 2D transfers.   Sascha Hauer
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Sascha Hauer
• [GIT PULL] cs89x0 platform support   Sascha Hauer
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Sascha Hauer
• [PATCH] MAINTAINERS: remove arch/arm/mach-mx*/ from IMX entry   Sascha Hauer
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Sascha Hauer
• [PATCH v2 0/7] irq_domain for imx tzic and gpio   Sascha Hauer
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Sascha Hauer
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Sascha Hauer
• [GIT PULL] i.MX assorted   Sascha Hauer
• [PATCH 2/2] ARM: imx/pcm038: Don't specify regulator consumers by struct device   Sascha Hauer
• [PATCH] ARM i.MX5/6: Add dt support for generic boards   Sascha Hauer
• [GIT PULL] i.MX assorted   Sascha Hauer
• [PATCH] ARM i.MX5/6: Add dt support for generic boards   Sascha Hauer
• [PATCH v3 03/10] of: Add PWM support.   Sascha Hauer
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Sascha Hauer
• [PATCH] ARM: mach-imx: mx3: Fix section mismatch in imx3_init_l2x0()   Sascha Hauer
• [PATCH][trivial] ARM: Remove redundant ';' from avic_irq_set_priority()   Sascha Hauer
• [GIT PULL] i.MX fixes   Sascha Hauer
• [GIT PULL] i.MX driver patches   Sascha Hauer
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Sascha Hauer
• [PATCH] ARM: mx3: Setup AIPS registers   Sascha Hauer
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Sascha Hauer
• [PATCH] regulator mc13783: bail out without platform data   Sascha Hauer
• [PATCH] Add devicetree support for i.MX27 SoCs   Sascha Hauer
• [PATCH 1/3] ARM i.MX27: Add devicetree support   Sascha Hauer
• [PATCH 2/3] ARM i.MX: Add phytec phycore-i.MX27 (aka pcm038) devicetree support   Sascha Hauer
• [PATCH 3/3] devicetree-bindings: Add documentation for i.MX generic boards   Sascha Hauer
• [PATCH] ARM: 3ds_debugboard: Let ethernet be functional again   Sascha Hauer
• [PATCH v2 2/2] ARM: mx3: Let mx31 and mx35 enter in LPM mode in WFI   Sascha Hauer
• [PATCH v2] ARM: mx3: Setup AIPS registers   Sascha Hauer
• [PATCH v9 00/25] gpio/omap: driver cleanup and fixes   Hebbar, Gururaja
• [PATCH v9 00/25] gpio/omap: driver cleanup and fixes   Hebbar, Gururaja
• [PATCH 00/10] I2C updates   Hebbar, Gururaja
• [PATCH v1 04/11] arm/PCI: remove arch pci_flags definition   Bjorn Helgaas
• [PATCH v1 05/11] arm/PCI: use pci_flags PCI_PROBE_ONLY instead of arm-specific flag   Bjorn Helgaas
• [PATCH v2 04/12] arm/PCI: remove arch pci_flags definition   Bjorn Helgaas
• [PATCH v2 05/12] arm/PCI: use pci_flags PCI_PROBE_ONLY instead of arm-specific flag   Bjorn Helgaas
• [PATCH v3 00/25] irq_domain generalization and refinement   Benjamin Herrenschmidt
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Benjamin Herrenschmidt
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Benjamin Herrenschmidt
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Benjamin Herrenschmidt
• [PATCH] arm/io.h: add macros to read/write big/little endian register   Benjamin Herrenschmidt
• [PATCH] arm/io.h: add macros to read/write big/little endian register   Benjamin Herrenschmidt
• [PATCH] arm/io.h: add macros to read/write big/little endian register   Benjamin Herrenschmidt
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Rob Herring
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Rob Herring
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Rob Herring
• [PATCH v4 0/4] generic irq chip domain support   Rob Herring
• [PATCH v4 1/4] ARM: kconfig: always select IRQ_DOMAIN   Rob Herring
• [PATCH v4 2/4] irq: add irq_domain support to generic-chip   Rob Herring
• [PATCH v4 3/4] ARM: imx: add irq domain support to tzic   Rob Herring
• [PATCH v4 4/4] gpio: pl061: enable interrupts with DT style binding   Rob Herring
• [PATCH v3 00/25] irq_domain generalization and refinement   Rob Herring
• [PATCH 0/3] entry-macro.S clean-up   Rob Herring
• [PATCH 1/3] ARM: make arch_ret_to_user macro optional   Rob Herring
• [PATCH 2/3] ARM: make disable_fiq macro optional   Rob Herring
• [PATCH 3/3] ARM: remove empty disable_fiq and arch_ret_to_user macros   Rob Herring
• [PATCH v4 2/4] irq: add irq_domain support to generic-chip   Rob Herring
• [PATCH 2/3] ARM: make disable_fiq macro optional   Rob Herring
• [PATCH 1/1] of: introduce helper to manage boolean   Rob Herring
• [PATCH 2/3] ARM: make disable_fiq macro optional   Rob Herring
• [PATCH v6 00/15] Per SoC descriptor   Rob Herring
• [PATCH v4 2/4] irq: add irq_domain support to generic-chip   Rob Herring
• [PATCH] ARM: Exynos: Add irq domain and device tree support for interrupt combiner   Rob Herring
• [PATCH 2/3] ARM: make disable_fiq macro optional   Rob Herring
• [PATCH v6] irq: add irq_domain support to generic-chip   Rob Herring
• [PATCH v2 0/4] entry-macro.S clean-up   Rob Herring
• [PATCH v2 1/4] ARM: make arch_ret_to_user macro optional   Rob Herring
• [PATCH v2 2/4] ARM: rpc: make default fiq handler run-time installed   Rob Herring
• [PATCH v2 3/4] ARM: make entry-macro.S depend on !MULTI_IRQ_HANDLER   Rob Herring
• [PATCH v2 4/4] ARM: remove empty disable_fiq and arch_ret_to_user macros   Rob Herring
• hex number case in dts files.   Rob Herring
• [PATCH v4 4/4] gpio: pl061: enable interrupts with DT style binding   Rob Herring
• [PATCH v6] irq: add irq_domain support to generic-chip   Rob Herring
• [PATCH v4 4/4] gpio: pl061: enable interrupts with DT style binding   Rob Herring
• [PULL] Highbank for 3.4   Rob Herring
• [PATCH 3/8] ARM: imx5: adopt generic_chip irq_domain support for tzic   Rob Herring
• [PATCH V3 1/1] dt: add of_get_child_count helper function   Rob Herring
• [PATCH 1/1] gpio: drop CONFIG_OF_GPIO in the definition of the struct gpio_chip   Rob Herring
• [PATCH 3/8] ARM: imx5: adopt generic_chip irq_domain support for tzic   Rob Herring
• [PATCH 1/1] gpio: drop CONFIG_OF_GPIO in the definition of the struct gpio_chip   Rob Herring
• [PATCH 1/8] irq: choose irq_domain type for generic-chip based on irq_base   Rob Herring
• [PATCH 00/15] mach/io.h cleanup and removal   Rob Herring
• [PATCH 01/15] usb: ohci-pxa27x: add explicit include of hardware.h   Rob Herring
• [PATCH 02/15] ARM: add explicit include of system.h to processor.h   Rob Herring
• [PATCH 03/15] ARM: provide runtime hook for ioremap   Rob Herring
• [PATCH 04/15] ARM: imx: convert to common runtime ioremap hook   Rob Herring
• [PATCH 05/15] ARM: msm: use runtime ioremap hook   Rob Herring
• [PATCH 06/15] ARM: msm: clean-up mach/io.h   Rob Herring
• [PATCH 07/15] ARM: at91: clean-up mach/io.h   Rob Herring
• [PATCH 08/15] ARM: davinci: remove unneeded mach/io.h include   Rob Herring
• [PATCH 09/15] ARM: orion5x: clean-up mach/io.h   Rob Herring
• [PATCH 10/15] ARM: tegra: clean-up mach/io.h   Rob Herring
• [PATCH 11/15] ARM: ep93xx: clean-up mach/io.h   Rob Herring
• [PATCH 12/15] ARM: clps711x: remove unneeded include of mach/io.h   Rob Herring
• [PATCH 13/15] ARM: make mach/io.h include optional   Rob Herring
• [PATCH 14/15] ARM: remove bunch of now unused mach/io.h files   Rob Herring
• [PATCH 15/15] ARM: kill off __mem_pci   Rob Herring
• [PATCH v5 1/9] ARM: at91/aic: add irq domain and device tree support   Rob Herring
• [PATCH 11/15] ARM: ep93xx: clean-up mach/io.h   Rob Herring
• [PATCH 03/15] ARM: provide runtime hook for ioremap   Rob Herring
• [PATCH 13/15] ARM: make mach/io.h include optional   Rob Herring
• [PATCH 1/1] gpio: drop CONFIG_OF_GPIO in the definition of the struct gpio_chip   Rob Herring
• [PATCH 13/15] ARM: make mach/io.h include optional   Rob Herring
• [PATCH 00/15] mach/io.h cleanup and removal   Rob Herring
• [PATCH 00/15] mach/io.h cleanup and removal   Rob Herring
• [PATCH 07/15] ARM: at91: clean-up mach/io.h   Rob Herring
• [PATCH v5 1/9] ARM: at91/aic: add irq domain and device tree support   Rob Herring
• [PATCH 13/15] ARM: make mach/io.h include optional   Rob Herring
• [PATCH v3] ARM: rpc: make default fiq handler run-time installed   Rob Herring
• [PATCH v3] ARM: rpc: make default fiq handler run-time installed   Rob Herring
• [PATCH 00/15] mach/io.h cleanup and removal   Rob Herring
• [PATCH v3 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Rob Herring
• [PATCH 00/15] mach/io.h cleanup and removal   Rob Herring
• [PULL] generic irq chip and pl061 irqdomain support   Rob Herring
• [PATCH 13/15] ARM: make mach/io.h include optional   Rob Herring
• [PATCH 13/15] ARM: make mach/io.h include optional   Rob Herring
• [PATCH 1/4] spi/omap: Add DT support to McSPI driver   Rob Herring
• [PATCH] ARM: need to include asm/system.h in asm/processor.h   Rob Herring
• [PATCH v2 2/7] ARM: imx5: adopt generic_chip irq_domain support for tzic   Rob Herring
• [PATCH v2 00/13] Make mach/irqs.h optional   Rob Herring
• [PATCH 07/15] ARM: at91: clean-up mach/io.h   Rob Herring
• [GIT PULL] imx irq_domain migration   Rob Herring
• [PATCH 0/4] sparse irq fixes for pxa and sa1100   Rob Herring
• [PATCH 1/4] ARM: sa1100: fix sa1100 after sparse irq conversion   Rob Herring
• [PATCH 2/4] ARM: sa1100: fix simpad compile error   Rob Herring
• [PATCH 3/4] ARM: pxa: mainstone: add missing include for IRQ_BOARD_START   Rob Herring
• [PATCH 4/4] rtc: sa1100: include mach/irqs.h instead of asm/irq.h   Rob Herring
• [PATCH 1/4] ARM: sa1100: fix sa1100 after sparse irq conversion   Rob Herring
• [PATCH] ARM: at91: AIC and GPIO IRQ device tree initilization   Rob Herring
• [PATCH 1/4] ARM: sa1100: fix sa1100 after sparse irq conversion   Rob Herring
• [PULL] entry-macro.S clean-up and removal   Rob Herring
• [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h   Rob Herring
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Rob Herring
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Rob Herring
• [PATCH v3 4/4] ARM: Exynos4: Add device tree support for gpio wakeup interrupt controller   Rob Herring
• [PATCH 2/3 v4] arm: kirkwood: add dreamplug (fdt) support.   Rob Herring
• [PATCH v2 04/12] arm/PCI: remove arch pci_flags definition   Rob Herring
• [PATCH 1/4] ARM: sa1100: fix sa1100 after sparse irq conversion   Rob Herring
• [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ   Rob Herring
• [PATCH] gic : check if there are pending interrupts   Rob Herring
• [PATCH] ARM: integrator: convert to sparse irqs   Rob Herring
• [PATCH] ARM: integrator: convert to sparse irqs   Rob Herring
• [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h   Rob Herring
• [PATCH] ARM: integrator: convert to sparse irqs   Rob Herring
• [PATCH] ARM: ep93xx: clean-up mach/io.h   Rob Herring
• [PATCH 07/15] ARM: at91: clean-up mach/io.h   Rob Herring
• [PATCH 13/15] ARM: make mach/io.h include optional   Rob Herring
• [PATCH 13/15] ARM: make mach/io.h include optional   Rob Herring
• [PATCH v5 1/9] cpuidle: Add commonly used functionality for consolidation   Rob Herring
• [PATCH v2 07/28] ARM: iop13xx: move io.h externs to io.c   Rob Herring
• [PATCH v2 19/28] ARM: Add fixed PCI i/o mapping   Rob Herring
• [PATCH v2 03/28] ARM: imx: convert to common runtime ioremap hook   Rob Herring
• [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h   Rob Herring
• [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h   Rob Herring
• [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h   Rob Herring
• [PATCH v2 19/28] ARM: Add fixed PCI i/o mapping   Rob Herring
• [PATCH] ARM: OMAP2+: PM debug: fix the use of debugfs_create_* API   Kevin Hilman
• [PATCH 1/2] ARM: OMAP3: PM: remove superfluous calls to pwrdm_clear_all_prev_pwrst()   Kevin Hilman
• [PATCH 0/2] ARM: OMAP2+: PM: code consolidation for 3.4   Kevin Hilman
• [PATCH 1/2] ARM: OMAP: Get rid of reset for system timer   Kevin Hilman
• [PATCH 07/20] ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a need   Kevin Hilman
• [PATCH v3 00/20] ARM: OMAP3+: SmartReflex: bugfixes   Kevin Hilman
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Kevin Hilman
• [PATCH v9 01/25] gpio/omap: remove dependency on gpio_bank_count   Kevin Hilman
• [PATCH v9 00/25] gpio/omap: driver cleanup and fixes   Kevin Hilman
• [PATCH 1/2] ARM: OMAP: Get rid of reset for system timer   Kevin Hilman
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Kevin Hilman
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Kevin Hilman
• [PATCH v9 00/25] gpio/omap: driver cleanup and fixes   Kevin Hilman
• [PATCH] ARM: OMAP4: cpuidle: Fix the C-state reporting to cpuidle governor.   Kevin Hilman
• [PATCH 05/16] ARM: omap: fix vc.c PMIC error message   Kevin Hilman
• [PATCH 06/16] ARM: omap: fix uninformative vc/i2c configuration error message   Kevin Hilman
• [PATCH 16/16] ARM: omap: disable cpuidle for OMAP3 platforms   Kevin Hilman
• [PATCH 16/16] ARM: omap: disable cpuidle for OMAP3 platforms   Kevin Hilman
• [PATCH] gpio: omap: be more aggressive with pm_runtime   Kevin Hilman
• [PATCH] gpio: omap: be more aggressive with pm_runtime   Kevin Hilman
• [PATCH 05/16] ARM: omap: fix vc.c PMIC error message   Kevin Hilman
• [PATCH 05/16] ARM: omap: fix vc.c PMIC error message   Kevin Hilman
• [PATCH 05/16] ARM: omap: fix vc.c PMIC error message   Kevin Hilman
• [PATCH] ARM: OMAP2xxx: PM: fix OMAP2xxx-specific UART idle bug in v3.3   Kevin Hilman
• ARM: OMAP2xxx: PM: remove obsolete timer disable code in the suspend path   Kevin Hilman
• [PATCH v9 00/25] gpio/omap: driver cleanup and fixes   Kevin Hilman
• [PATCH] ARM: OMAP4: cpuidle: Fix the C-state reporting to cpuidle governor.   Kevin Hilman
• [PATCH 4/6] arm: omap3: add manual control for mpu_iva voltdm usecounting   Kevin Hilman
• [PATCH 0/6] arm: omap: clk/clkdm/pwrdm/voltdm changes to usecounting   Kevin Hilman
• [PATCH 6/6] arm: omap: pm-debug: enhanced usecount debug support   Kevin Hilman
• [PATCH 6/6] arm: omap: pm-debug: enhanced usecount debug support   Kevin Hilman
• [PATCH v2] ARM: OMAP: clock: cleanup CPUfreq leftovers   Kevin Hilman
• [PATCH] cpufreq: OMAP driver depends CPUfreq tables   Kevin Hilman
• [PATCH 4/6] arm: omap3: add manual control for mpu_iva voltdm usecounting   Kevin Hilman
• [PATCHv2 7/8] arm: omap: clockdomain: add support for preventing domain transitions   Kevin Hilman
• [PATCHv2 8/8] arm: omap3: prevent per_clkdm from attempting manual domain transitions   Kevin Hilman
• [PATCH v2] ARM: OMAP: clock: cleanup CPUfreq leftovers   Kevin Hilman
• [PATCH] ARM: OMAP: remove omap_device_parent   Kevin Hilman
• [PATCH v3] ARM: OMAP: clock: cleanup CPUfreq leftovers   Kevin Hilman
• [PATCH] ARM: OMAP: convert omap_device_build() and callers to __init   Kevin Hilman
• [PATCHv2 8/8] arm: omap3: prevent per_clkdm from attempting manual domain transitions   Kevin Hilman
• [PATCH 6/6] arm: omap: pm-debug: enhanced usecount debug support   Kevin Hilman
• [PATCH 2/4] ARM: OMAP2+: omap_device: Replace dev_warn by dev_dbg in omap_device_build_from_dt   Kevin Hilman
• [PATCH v2] cpufreq: OMAP driver depends CPUfreq tables   Kevin Hilman
• [GIT PULL] gpio/omap: cleanup and runtime PM conversion for v3.4   Kevin Hilman
• [GIT PULL] ARM: OMAP: PM fixes for 3.3-rc   Kevin Hilman
• SMP local timers and their CPUfreq notifiers setup on OMAP3   Kevin Hilman
• [GIT PULL] OMAP PM EMU fix for v3.3   Kevin Hilman
• [PATCH] gpio/omap: fix wakeups on level-triggered GPIOs   Kevin Hilman
• [PATCH 0/2] Two trivial omap/serial patches   Kevin Hilman
• [PATCH] ARM: OMAP: omap_device: remove omap_device_parent   Kevin Hilman
• [PATCHv10 3/4] omap3: add common twl configurations for vdd1 and vdd2   Kevin Hilman
• [PATCHv10 3/4] omap3: add common twl configurations for vdd1 and vdd2   Kevin Hilman
• [PATCH] gpio/omap: fix wakeups on level-triggered GPIOs   Kevin Hilman
• [PATCHv2 8/8] arm: omap3: prevent per_clkdm from attempting manual domain transitions   Kevin Hilman
• [GIT PULL] gpio/omap: cleanup and runtime PM conversion for v3.4   Kevin Hilman
• [PATCH 2/6] gpio/omap: remove saved_wakeup field from struct gpio_bank   Kevin Hilman
• [PATCH 3/6] gpio/omap: remove suspend_wakeup field from struct gpio_bank   Kevin Hilman
• [PATCH 4/6] gpio/omap: get rid of retrigger variable in gpio_irq_handler   Kevin Hilman
• [PATCH 6/6] gpio/omap: fix _set_gpio_irqenable implementation   Kevin Hilman
• [PATCH 3/6] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux   Kevin Hilman
• [PATCH 4/6] arm: omap4: prm: fix interrupt register offsets   Kevin Hilman
• [PATCH 5/6] ARM: OMAP4: suspend: Do not get dsp/tesla out of reset   Kevin Hilman
• [PATCH v2 0/6] gpio/omap: Cleanup and adaptation to Device Tree   Kevin Hilman
• [PATCH 0/6] ARM: OMAP4: core retention support   Kevin Hilman
• [PATCH] tty: serial: OMAP: Fix oops due to NULL pdata in DT boot   Kevin Hilman
• [PATCH 3/6] gpio/omap: remove suspend_wakeup field from struct gpio_bank   Kevin Hilman
• [PATCH 01/14] ARM: OMAP3+: SmartReflex: Layer Cleanup [V4]   Kevin Hilman
• [PATCH 04/14] ARM: OMAP3+: SmartReflex: Add a shutdown hook   Kevin Hilman
• [PATCH 08/14] ARM: OMAP3+: hwmod: add SmartReflex IRQs   Kevin Hilman
• [PATCH v4 00/14] ARM: OMAP3+: SmartReflex: bugfixes and clean-ups   Kevin Hilman
• [PATCHv2 8/8] arm: omap3: prevent per_clkdm from attempting manual domain transitions   Kevin Hilman
• [PATCH 04/14] ARM: OMAP3+: SmartReflex: Add a shutdown hook   Kevin Hilman
• [PATCH 0/2] change lpj in arm smp common code   Kevin Hilman
• [PATCH v6 1/9] cpuidle: Add common time keeping and irq enabling   Kevin Hilman
• [GIT PULL 5/5] Clean-up for omap   Kevin Hilman
• [PATCH v5] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Lauri Hintsala
• [PATCH-V2] arm/dts: omap3-evm: Add i2c and twl4030 support   Vaibhav Hiremath
• [PATCH] arm/dts: OMAP3: Add omap3evm and am335xevm support   Vaibhav Hiremath
• [PATCH-V5 0/3] Introducing TI's New SoC/board AM335XEVM   Hiremath, Vaibhav
• [PATCH 1/3] ARM: OMAP2+: 32k-counter: Use hwmod lookup to check presence of 32k timer   Hiremath, Vaibhav
• Reg pinmux driver for OMAP based SoC- AM335X   Hiremath, Vaibhav
• [PATCH] arm/dts: OMAP3: Add omap3evm and am335xevm support   Hiremath, Vaibhav
• [PATCH-V2] arm/dts: omap3-evm: Add i2c and twl4030 support   Hiremath, Vaibhav
• [PATCH 2/2] arm/dts: Add support for TI AM335x EVM board   Hiremath, Vaibhav
• [PATCH-V3 0/3] ARM: OMAP4: Remove hardcoded reg-offs for PWRSTCTRL & PWRSTST   Vaibhav Hiremath
• [PATCH-V3 1/3] ARM: OMAP4: Remove hardcoded reg-offs for PWRSTCTRL & PWRSTST   Vaibhav Hiremath
• [PATCH-V3 2/3] ARM: OMAP4: prminst: Add boot time __init function for prminst   Vaibhav Hiremath
• [PATCH-V3 3/3] ARM: OMAP: am33xx: Hook-up am33xx support to existing prm code   Vaibhav Hiremath
• [PATCH-V3 0/3] ARM: OMAP4: Remove hardcoded reg-offs for PWRSTCTRL & PWRSTST   Hiremath, Vaibhav
• [PATCH 0/2] ARM: OMAP4: Cleanup in cminst code   Vaibhav Hiremath
• [PATCH 1/2] ARM: OMAP4: cminst: Add boot time __init function for cminst   Vaibhav Hiremath
• [PATCH 2/2] ARM: OMAP: am33xx: Hook-up am33xx support to existing cm code   Vaibhav Hiremath
• [PATCH 1/2] ARM: OMAP4: cminst: Add boot time __init function for cminst   Hiremath, Vaibhav
• [PATCH 2/2] ARM: OMAP: am33xx: Hook-up am33xx support to existing cm code   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: hwmod: Fix wrong SYSC_TYPE1_XXX_MASK bit definitions   Vaibhav Hiremath
• [PATCH] ARM: OMAP2+: hwmod: Add new sysc_type3 into omap_hwmod required for am33xx   Vaibhav Hiremath
• [PATCH v2] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Hiremath, Vaibhav
• [GIT PULL] ARM: OMAP: DTS updates   Hiremath, Vaibhav
• [PATCHv21 02/16] mm: compaction: introduce isolate_migratepages_range()   KAMEZAWA Hiroyuki
• [PATCHv21 03/16] mm: compaction: introduce map_pages()   KAMEZAWA Hiroyuki
• [PATCHv21 04/16] mm: compaction: introduce isolate_freepages_range()   KAMEZAWA Hiroyuki
• [PATCHv21 05/16] mm: compaction: export some of the functions   KAMEZAWA Hiroyuki
• [PATCHv21 06/16] mm: page_alloc: introduce alloc_contig_range()   KAMEZAWA Hiroyuki
• [PATCHv21 07/16] mm: page_alloc: change fallbacks array handling   KAMEZAWA Hiroyuki
• [PATCHv21 08/16] mm: mmzone: MIGRATE_CMA migration type added   KAMEZAWA Hiroyuki
• [PATCHv21 09/16] mm: page_isolation: MIGRATE_CMA isolation functions added   KAMEZAWA Hiroyuki
• [PATCHv21 10/16] mm: Serialize access to min_free_kbytes   KAMEZAWA Hiroyuki
• [PATCH v2 1/1] rc: Add support for GPIO based IR Receiver driver.   James Hogan
• [PATCH v3 1/1] rc: Add support for GPIO based IR Receiver driver.   James Hogan
• iMX53 quick start board and SD/MMC   Michael Hunold
• iMX53 quick start board and SD/MMC   Michael Hunold
• [PATCH] mmc: start removing enable / disable API   Adrian Hunter
• [PATCH] mmc: start removing enable / disable API   Adrian Hunter
• [PATCH V2 0/1] mmc: start removing enable / disable API   Adrian Hunter
• [PATCH V2 1/1] mmc: start removing enable / disable API   Adrian Hunter
• [PATCH] ARM: ptrace: Include linux/audit.h to fix build errors   Nathaniel Husted
• [PATCH v2] ARM: LPC32xx: Ethernet driver   Ben Hutchings
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Grazvydas Ignotas
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Grazvydas Ignotas
• [PATCH] gpio: omap: be more aggressive with pm_runtime   Grazvydas Ignotas
• [RFC 00/11]O MAP/ASoC: Move and merge McBSP driver under ASoC   Grazvydas Ignotas
• [PATCH] ARM: omap: pandora: fix usbhs platform data   Grazvydas Ignotas
• [PATCH] ARM: omap: pandora: add support for backlight and poweroff   Grazvydas Ignotas
• [RFC 00/11]O MAP/ASoC: Move and merge McBSP driver under ASoC   Grazvydas Ignotas
• [PATCH 2/6] drivers/base: add bus for System-on-Chip devices   Jamie Iles
• [PATCH 3/3] ARM: remove empty disable_fiq and arch_ret_to_user macros   Jamie Iles
• [PATCH 0/7] share sa1100 rtc driver to arch-mmp   Robert Jarzmik
• [PATCH 0/7] share sa1100 rtc driver to arch-mmp   Robert Jarzmik
• Linux 3.3-rc5 and pxa-gpio possible regression   Robert Jarzmik
• [PATCH 3/3] arm: kirkwood: convert uart0 to devicetree.   Jason
• [PATCH 1/3] arm: ignore devicetree blobs.   Jason
• [PATCH 2/3 v4] arm: kirkwood: add dreamplug (fdt) support.   Jason
• [PATCH 2/3 v4] arm: kirkwood: add dreamplug (fdt) support.   Jason
• [PATCH 1/2 v5] arm: kirkwood: add dreamplug (fdt) support.   Jason
• [PATCH 1/2 v5] arm: kirkwood: add dreamplug (fdt) support.   Jason
• [PATCH 2/3 v4] arm: kirkwood: add dreamplug (fdt) support.   Jason
• [PATCH 2/3 v4] arm: kirkwood: add dreamplug (fdt) support.   Jason
• [PATCH 1/2 v5] arm: kirkwood: add dreamplug (fdt) support.   Jason
• [PATCH 0/2 v5] arm: kirkwood: add dreamplug/devicetree support   Jason
• [PATCH 0/2 v6] arm: kirkwood: add dreamplug/devicetree support   Jason
• [PATCH WIP] ARM: kirkwood: covert orion-spi to fdt.   Jason
• [PATCH WIP] ARM: kirkwood: covert orion-spi to fdt.   Jason
• [PATCH 2/3 v4] arm: kirkwood: add dreamplug (fdt) support.   Jason
• [V1 1/3] mfd: add power control interface for pm8606 chip   Jett.Zhou
• [V1 2/3] backlight: modified power control of pm860x backlight   Jett.Zhou
• [V1 3/3] led: modified power control of pm860x led   Jett.Zhou
• [V1 1/4] regulator: fix the ldo configure according to 88pm860x spec   Jett.Zhou
• [V1 1/4] regulator: fix the ldo configure according to 88pm860x spec   Jett.Zhou
• [V2 0/3] patches for power control on pm8606 oscillator   Jett.Zhou
• [V2 1/3] mfd: add power control interface for pm8606 chip   Jett.Zhou
• [V2 2/3] backlight: modified power control of pm860x backlight   Jett.Zhou
• [V2 3/3] led: modified power control of pm860x led   Jett.Zhou
• [V3 0/3] patches for power control on pm8606 oscillator   Jett.Zhou
• [V3 1/3] mfd: add power control interface for pm8606 chip   Jett.Zhou
• [V3 2/3] backlight: modified power control of pm860x backlight   Jett.Zhou
• [V3 3/3] led: modified power control of pm860x led   Jett.Zhou
• [V4 0/4] patches for power control on pm8606 oscillator   Jett.Zhou
• [V4 1/4] mfd: add power control interface for pm8606 chip   Jett.Zhou
• [V4 2/4] mfd: code clean for pm8606 sub-dev initialization   Jett.Zhou
• [V4 3/4] backlight: modified power control of pm860x backlight   Jett.Zhou
• [V4 4/4] led: modified power control of pm860x led   Jett.Zhou
• [PATCH V1] arm: tegra: dma: not required to move requestor when stopping.   Olof Johansson
• [PATCH v2 2/8] ARM: tegra: functions to access the flowcontroller   Olof Johansson
• [PATCH v2 1/8] ARM: tegra: export the chipid   Olof Johansson
• [PATCH v1 3/3] ARM: tegra: cpuidle driver for tegra   Olof Johansson
• [PATCH v1 0/3] Add support for LP3   Olof Johansson
• [PATCH] ARM: tegra: Add pinmux board file for Cardhu   Olof Johansson
• [PATCH 1/3] ARM: dt: Add binding for Tegra PMC   Olof Johansson
• [PATCH] ARM: tegra: Add pinmux board file for Cardhu   Olof Johansson
• [PATCH v2 3/8] ARM: tegra: rework Tegra secondary CPU core bringup   Olof Johansson
• [PATCH 3/4] ARM: tegra: Switch to new pinctrl driver   Olof Johansson
• [PATCH 3/4] ARM: tegra: Switch to new pinctrl driver   Olof Johansson
• [PATCH v2 0/8] Add tegra30 support for secondary cores   Olof Johansson
• [PATCH 5/9] ARM: EXYNOS: add board file for SMDK5250   Olof Johansson
• [PATCH 3/9] ARM: EXYNOS: add initial setup-i2c0 for EXYNOS5   Olof Johansson
• [PATCH 3/4] ARM: tegra: Switch to new pinctrl driver   Olof Johansson
• [PATCH] arm: fix build failure in mach-bcmring/arch.c   Olof Johansson
• [PATCH] ARM: bcmring: remove unused DMA map code   Olof Johansson
• [GIT PULL] arm-soc fixes for 3.3-rc   Olof Johansson
• [GIT PULL] Samsung fixes-2 for v3.3   Olof Johansson
• [PATCH V2 1/4] i2c: tegra: Add __devinit/exit to probe/removeG   Olof Johansson
• [GIT PULL] i.MX fixes for -rc   Olof Johansson
• [GIT PULL] please pull tegra fixes for 3.3-rc   Olof Johansson
• ARM/ARM-SoC plans for v3.4 merge window   Olof Johansson
• [GIT PULL] cs89x0 platform support   Olof Johansson
• [GIT PULL] plat-nomadik timers for next   Olof Johansson
• [GIT PULL] mxs/clk for v3.4   Olof Johansson
• [GIT PULL] i.MX clk_prepare/unprepare   Olof Johansson
• [GIT PULL] mxs/defconfig for 3.4   Olof Johansson
• [GIT PULL] at91: pm cleanup for standby   Olof Johansson
• [GIT PULL] at91: devices and boards files update for 3.4   Olof Johansson
• [GIT PULL] at91: at91sam9x5 family basic support   Olof Johansson
• [GIT PULL v2] mxs/boards for v3.4   Olof Johansson
• ARM/ARM-SoC plans for v3.4 merge window   Olof Johansson
• [GIT PULL] mxs/defconfig for 3.4   Olof Johansson
• [PATCH v4 0/7] ARM: Fixes to make LPC32xx compile and boot again   Olof Johansson
• [PATCH v2] arm:orion: Fix USB phy for orion5x.   Olof Johansson
• [PATCHv3] [ARM][Orion] Fix Orion5x GPIO regression from MPP cleanup   Olof Johansson
• linux-next: manual merge of the arm-soc tree with the arm tree   Olof Johansson
• [PULL] Highbank for 3.4   Olof Johansson
• [GIT PULL] at91: fixes for 3.3-rc4   Olof Johansson
• [PATCH] ARM: need to include asm/system.h in asm/processor.h   Olof Johansson
• [PATCH] ARM: need to include asm/system.h in asm/processor.h   Olof Johansson
• [PATCH] ARM: iop: add missing includes   Olof Johansson
• [PATCH v2 04/11] ARM: EXYNOS: add interrupt definitions for EXYNOS5250   Olof Johansson
• [PATCH RESEND] arm: lpc32xx: phy3250: add rtc & touch device   Olof Johansson
• [PATCH v3 02/10] ARM: tegra: export Tegra chipid   Olof Johansson
• [PATCH V2 1/2] ARM: tegra: Add pinmux board file for Cardhu   Olof Johansson
• [PATCH V2 2/2] ARM: dt: Add SD controller configuration to Tegra Cardhu   Olof Johansson
• [PATCH v3 05/10] ARM: tegra: rework Tegra secondary CPU core bringup   Olof Johansson
• [PATCH v3 00/10] Add tegra30 support for secondary cores   Olof Johansson
• [PATCH] ARM: tegra: Avoid compiling cpuidle code when not configured   Olof Johansson
• [PATCH V2 1/2] ARM: tegra: Add pinmux board file for Cardhu   Olof Johansson
• [PATCH] ARM: tegra: Demote EMC clock inconsistency BUG to WARN   Olof Johansson
• [PATCH] ARM: tegra: select required CPU and L2 errata options   Olof Johansson
• What's in tegra.git for 3.4   Olof Johansson
• [PATCH] ARM: tegra: uncompress.h: Don't depend on kernel headers   Olof Johansson
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Dave Jones
• [PATCH 0/6] ux500: Export SoC information and some platform clean-up   Lee Jones
• [PATCH 1/6] mach-ux500: pass parent pointer to each platform device   Lee Jones
• [PATCH 2/6] drivers/base: add bus for System-on-Chip devices   Lee Jones
• [PATCH 3/6] Documentation: add information for new sysfs soc bus functionality   Lee Jones
• [PATCH 4/6] mach-ux500: export System-on-Chip information ux500 via sysfs   Lee Jones
• [PATCH 5/6] mach-ux500: move top level platform devices in sysfs to /sys/devices/socX   Lee Jones
• [PATCH 6/6] mach-ux500: remove intermediary add_platform_device* functions   Lee Jones
• [PATCH 0/6] ux500: Export SoC information and some platform clean-up   Lee Jones
• [PATCH 1/6] mach-ux500: pass parent pointer to each platform device   Lee Jones
• [PATCH 2/6] drivers/base: add bus for System-on-Chip devices   Lee Jones
• [PATCH 3/6] Documentation: add information for new sysfs soc bus functionality   Lee Jones
• [PATCH 4/6] mach-ux500: export System-on-Chip information ux500 via sysfs   Lee Jones
• [PATCH 5/6] mach-ux500: move top level platform devices in sysfs to /sys/devices/socX   Lee Jones
• [PATCH 6/6] mach-ux500: remove intermediary add_platform_device* functions   Lee Jones
• Cache problems in user space - kernel space communication   Bart Jonkers
• Cache problems in user space - kernel space communication   Bart Jonkers
• [PATCH] Only include linux/sched.h once in arch/arm/mach-bcmring/dma.c   Jesper Juhl
• [PATCH] ARM, KS8695: Only include linux/gpio.h once in arch/arm/mach-ks8695/leds.c   Jesper Juhl
• [PATCH] ARM: Remove duplicate asm/memblock.h include from arch/arm/mm/init.c   Jesper Juhl
• [PATCH][trivial] ARM: Remove redundant ';' from avic_irq_set_priority()   Jesper Juhl
• insmod problem on ARM with more than 16MB of RAM?   Vladimir K
• [PATCH v6 08/15] ARM: SoC: convert ux500 to SoC descriptor   Srinidhi KASAGAR
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Greg KH
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Greg KH
• [PATCH 1/5] USB: sa1111: sparse and checkpatch cleanups   Greg KH
• [PATCH 1/5] USB: sa1111: sparse and checkpatch cleanups   Greg KH
• [PATCH 0/6] ux500: Export SoC information and some platform clean-up   Greg KH
• [PATCH 1/4] ARM: at91: usb ohci add dt support   Greg KH
• [PATCH] serial/sirf: fixup for changes to pin control   Greg KH
• [PATCH] tty: serial: OMAP: Fix oops due to NULL pdata in DT boot   Greg KH
• [HELP REQUIRED] : Andorid FIQ Debugger Porting issue on Kernel2.6.36   PINTU KUMAR
• [PATCH V6 1/5] ARM: exynos: Add support AFTR mode on EXYNOS4210   Amit Kachhap
• [PATCH v6 3/9] ARM: exynos: Consolidate time keeping and irq enable   Amit Kachhap
• [PATCH V6 0/5] ARM: exynos4210: Add l2 retention mode cpuidle state   Amit Daniel Kachhap
• [PATCH V6 1/5] ARM: exynos: Add support AFTR mode on EXYNOS4210   Amit Daniel Kachhap
• [PATCH V6 2/5] ARM: s5p: add L2 early resume code   Amit Daniel Kachhap
• [PATCH V6 3/5] ARM: exynos: save L2 settings during bootup   Amit Daniel Kachhap
• [PATCH V6 4/5] ARM: exynos: remove useless code to save/restore L2   Amit Daniel Kachhap
• [PATCH V6 5/5] ARM: exynos: Enable l2 configuration through device tree   Amit Daniel Kachhap
• [PATCH] ARM: SAMSUNG: Change clock gating method feature of pwm   Huisung Kang
• [PATCH 2/2] ARM: SAMSUNG: Use spin_lock_irq{save/restore} instead of local_irq_{save/restore}   Huisung Kang
• [PATCH] ARM: SAMSUNG: Add over sampling preventing code   Huisung Kang
• [PATCH] ARM: S5P: Can handle edge interrupt handler   Huisung Kang
• [PATCH] ARM: S5P: Can handle edge interrupt handler   Huisung Kang
• [PATCHv2] ARM: S5P: Can handle edge interrupt handler   Huisung Kang
• [PATCH] ARM: SAMSUNG: Additional code with standby mode   Huisung Kang
• [PATCH] ARM: SAMSUNG: Clean up timed-out adc transaction   Huisung Kang
• [PATCH] ARM: SAMSUNG: Add locking sequence for nomal mode   Huisung Kang
• [PATCH] serial: samsung: disable irq before calling free_irq   Huisung Kang
• [PATCH 1/2] ARM: EXYNOS: Support I2C{4/5} for EXYNOS{4212/4412} SoC   Huisung Kang
• [PATCH 2/2] ARM: EXYNOS: Support I2C for EXYNOS5250 SoC   Huisung Kang
• [PATCH] ARM: SAMSUNG: Fixup prevent bug related to 'Unchecked return value'   Huisung Kang
• [PATCH 1/2] ARM: EXYNOS: Fix PMU IRQs for EXYNOS4 CPU's Performance Monitor Unit   Huisung Kang
• [PATCH 2/2] ARM: SAMSUNG: Fix PMU platform device for EXYNOS SoC   Huisung Kang
• Common clock API for i.MX   Saravana Kannan
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Saravana Kannan
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Saravana Kannan
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Saravana Kannan
• [PATCH] arch/arm/mach-ux500/board-mop500-u8500uib.c: included linux/gpio.h twice   Srinidhi Kasagar
• ARM: __enabled_CONFIG_NUMA undeclared   Konstantin Khlebnikov
• [PATCH 1/3] ARM: PXA: Zipit Z2: Fix oops in z2_power_off   Vasily Khoruzhick
• [PATCH 2/3] ARM: PXA27x: save/restore PWER on suspend/resume   Vasily Khoruzhick
• [PATCH 3/3] ARM: PXA27x: Zipit Z2: disable wake on GPIO0   Vasily Khoruzhick
• [PATCH] ARM: pxa27x_keypad: clear pending interrupts on keypad config   Vasily Khoruzhick
• [PATCH] pxafb: do console locking before calling fb_blank()   Vasily Khoruzhick
• [PATCH 2/3] ARM: PXA27x: save/restore PWER on suspend/resume   Vasily Khoruzhick
• [PATCH 3/3] ARM: PXA27x: Zipit Z2: disable wake on GPIO0   Vasily Khoruzhick
• [PATCH 3/3] ARM: PXA27x: Zipit Z2: disable wake on GPIO0   Vasily Khoruzhick
• [PATCH v2 1/2] DMA: PL330: Merge PL330 driver into drivers/dma/   Boojin Kim
• [PATCH] ARM: EXYNOS: Configure ARM_NR_BANKS for EXYNOS SoC   Boojin Kim
• [PATCH] ARM: EXYNOS: Configure ARM_NR_BANKS for EXYNOS SoC   Boojin Kim
• [PATCH] ARM: pl330: fix null pointer dereference in pl330_chan_ctrl()   Boojin Kim
• [PATCHv2] ARM: EXYNOS: Config ARM_NR_BANKS for EXYNOS SoC   Boojin Kim
• [PATCH v2] ARM: Exynos4: Add cpu-offset property in gic device tree node   Kukjin Kim
• [PATCHv2] ARM: EXYNOS: Config ARM_NR_BANKS for EXYNOS SoC   Kukjin Kim
• [PATCH 1/9] ARM: EXYNOS: use exynos_init_uarts() instead of exynos4_init_uarts()   Kukjin Kim
• [PATCH 2/9] ARM: EXYNOS: add clock part for EXYNOS5250 SoC   Kukjin Kim
• [PATCH 3/9] ARM: EXYNOS: add initial setup-i2c0 for EXYNOS5   Kukjin Kim
• [PATCH 4/9] ARM: EXYNOS: add support for ARCH_EXYNOS5 and EXYNOS5250   Kukjin Kim
• [PATCH 5/9] ARM: EXYNOS: add board file for SMDK5250   Kukjin Kim
• [PATCH 6/9] serial: samsung: Add support for EXYNOS5250   Kukjin Kim
• [PATCH 3/9] ARM: EXYNOS: add initial setup-i2c0 for EXYNOS5   Kukjin Kim
• [PATCH 1/3] ARM: EXYNOS: Enable MDMA driver   Kukjin Kim
• [PATCH 1/2] ARM: EXYNOS: add support GPIO for EXYNOS5250   Kukjin Kim
• [PATCH 1/2] ARM: EXYNOS: add support GPIO for EXYNOS5250   Kukjin Kim
• [PATCH] ARM: EXYNOS: Adds Samsung TRATS board support   Kukjin Kim
• [PATCH v3 0/6] mmc: sdhci-s3c: Rework platform data and add device tree support   Kukjin Kim
• [PATCH 8/9] ARM: EXYNOS: temporary add map definitions for uart   Kukjin Kim
• [PATCH 9/9] ARM: EXYNOS: temporary fixup regarding get_core_count()   Kukjin Kim
• [GIT PULL] regarding PL330 driver for rmk or arm-soc, and slave-dma   Kukjin Kim
• [GIT PULL] Samsung EXYNOS pm domains for devel   Kukjin Kim
• [GIT PULL] regarding PL330 driver for rmk or arm-soc, and slave-dma   Kukjin Kim
• [GIT PULL] Samsung regarding board developing for v3.4   Kukjin Kim
• [GIT PULL] fix to use static declarations for samsung stuff   Kukjin Kim
• [PATCH v2 00/11] ARM: EXYNOS: add suppport for EXYNOS5250 SoC   Kukjin Kim
• [PATCH v2 01/11] ARM: EXYNOS: to declare static for mach-exynos/common.c   Kukjin Kim
• [PATCH v2 02/11] ARM: EXYNOS: use exynos_init_uarts() instead of exynos4_init_uarts()   Kukjin Kim
• [PATCH v2 03/11] ARM: EXYNOS: add clock part for EXYNOS5250 SoC   Kukjin Kim
• [PATCH v2 04/11] ARM: EXYNOS: add interrupt definitions for EXYNOS5250   Kukjin Kim
• [PATCH v2 05/11] ARM: EXYNOS: add initial setup-i2c0 for EXYNOS5   Kukjin Kim
• [PATCH v2 06/11] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5   Kukjin Kim
• [PATCH v2 07/11] ARM: EXYNOS: add support get_core_count() for EXYNOS5250   Kukjin Kim
• [PATCH v2 08/11] ARM: EXYNOS: add support for ARCH_EXYNOS5 and EXYNOS5250   Kukjin Kim
• [PATCH v2 09/11] ARM: EXYNOS: add support device tree enabled board file for EXYNOS5   Kukjin Kim
• [PATCH v2 10/11] ARM: dts: add initial dts file for EXYNOS5250, SMDK5250   Kukjin Kim
• [PATCH v2 11/11] ARM: EXYNOS: temporary add board file for SMDK5250   Kukjin Kim
• [GIT PULL] Samsung EXYNOS pm domains for devel   Kukjin Kim
• [GIT PULL] samsung dt fixes-3 for v3.3   Kukjin Kim
• [GIT PULL] samsung devel-rtc for v3.4   Kukjin Kim
• [PATCH v2] ARM: EXYNOS: add support GPIO for EXYNOS5250   Kukjin Kim
• [PATCH v2 1/3] ARM: EXYNOS: add support GPIO for EXYNOS5250   Kukjin Kim
• [PATCH v2 2/3] gpio/samsung: add support GPIOlib for EXYNOS5250   Kukjin Kim
• [PATCH v2 3/3] gpio/samsung: use ioremap() for EXYNOS4 GPIOlib   Kukjin Kim
• [PATCH v2 0/3] ARM: EXYNOS: add support mdma and EXYNOS4X12 dma   Kukjin Kim
• [PATCH v2 1/3] ARM: EXYNOS: Enable MDMA driver   Kukjin Kim
• [PATCH RE-SEND 2/3] ARM: EXYNOS: Add apb_pclk clkdev entry for mdma1   Kukjin Kim
• [PATCH v2 3/3] ARM: EXYNOS: add support DMA for EXYNOS4X12 SoC   Kukjin Kim
• [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP   Kukjin Kim
• [PATCH 01/12] ARM: S3C24XX: remove unused spi gpio setup functions   Kukjin Kim
• [PATCH 02/12] ARM: S3C24XX: move spi-s3c24xx platdata out of mach   Kukjin Kim
• [PATCH 03/12] ARM: S3C24XX: Remove extern declaration of clk_msysclk   Kukjin Kim
• [PATCH 04/12] ARM: S3C24XX: move common S3C2443 clock definitions to clock.h   Kukjin Kim
• [PATCH 05/12] ARM: S3C2410: move s3c2410_baseclk_add to clock.h   Kukjin Kim
• [PATCH 06/12] ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX   Kukjin Kim
• [PATCH 07/12] ARM: S3C2410: move mach-s3c2410/* into mach-s3c24xx/   Kukjin Kim
• [PATCH 08/12] ARM: S3C2412: move mach-s3c2412/* into mach/s3c24xx/   Kukjin Kim
• [PATCH 09/12] ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/   Kukjin Kim
• [PATCH 10/12] ARM: S3C2440: move mach-s3c2440/* into mach-s3c24xx/   Kukjin Kim
• [PATCH 11/12] ARM: S3C2443: move mach-s3c2443/* into mach-s3c24xx/   Kukjin Kim
• [PATCH v2 03/11] ARM: EXYNOS: add clock part for EXYNOS5250 SoC   Kukjin Kim
• [PATCH v2 08/11] ARM: EXYNOS: add support for ARCH_EXYNOS5 and EXYNOS5250   Kukjin Kim
• [PATCH v2 08/11] ARM: EXYNOS: add support for ARCH_EXYNOS5 and EXYNOS5250   Kukjin Kim
• [PATCH v2 06/11] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5   Kukjin Kim
• [PATCH v2 04/11] ARM: EXYNOS: add interrupt definitions for EXYNOS5250   Kukjin Kim
• [PATCH v2 03/11] ARM: EXYNOS: add clock part for EXYNOS5250 SoC   Kukjin Kim
• [PATCH] ARM: S3C64XX: Supply platform data for SPI on Cragganmore   Kukjin Kim
• [PATCH] ARM: S3C24XX: Fix restart on S3C2442   Kukjin Kim
• [PATCH v2] cpufreq: Add S3C2416/S3C2450 cpufreq driver   Kukjin Kim
• [CPUFREQ] Fix exposure of ARM_EXYNOS4210_CPUFREQ   Kukjin Kim
• [PATCH v3 0/6] mmc: sdhci-s3c: Rework platform data and add device tree support   Kukjin Kim
• [PATCH v2 04/11] ARM: EXYNOS: add interrupt definitions for EXYNOS5250   Kukjin Kim
• [CPUFREQ] Fix exposure of ARM_EXYNOS4210_CPUFREQ   Kukjin Kim
• [PATCH V6 0/5] ARM: exynos4210: Add l2 retention mode cpuidle state   Kukjin Kim
• [PATCH V6 1/5] ARM: exynos: Add support AFTR mode on EXYNOS4210   Kukjin Kim
• [PATCH 09/12] ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/   Kukjin Kim
• [PATCH v3] DMA: PL330: Merge PL330 driver into drivers/dma/   Kukjin Kim
• [PATCH v2] ARM: EXYNOS: Support DMA for Exynos5250 SoC   Kukjin Kim
• [PATCH v3 0/6] mmc: sdhci-s3c: Rework platform data and add device tree support   Kukjin Kim
• Subject: [PATCH] MAINTAINERS: add maintainer entry for SAMSUNG EXYNOS DeviceTree   Kukjin Kim
• [PATCH v3] DMA: PL330: Merge PL330 driver into drivers/dma/   Kukjin Kim
• [PATCH v3] DMA: PL330: Merge PL330 driver into drivers/dma/   Kukjin Kim
• [PATCH v3] DMA: PL330: Merge PL330 driver into drivers/dma/   Kukjin Kim
• [PATCH v3] DMA: PL330: Merge PL330 driver into drivers/dma/   Kukjin Kim
• [PATCH 2/2] ARM: S3C24XX: Move the DMA base code to mach-s3c24xx   Kukjin Kim
• [PATCH 1/2] ARM: S3C24XX: Move s3c2443-clock.c to mach-s3c24xx   Kukjin Kim
• [PATCH v3] DMA: PL330: Merge PL330 driver into drivers/dma/   Kukjin Kim
• [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP   Kukjin Kim
• [PATCH] Move S3C2412_PM_SLEEP to common platform code   Kukjin Kim
• [PATCH 09/12] ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/   Kukjin Kim
• [PATCH v3] S3C24XX DMA resume regression fix   Kukjin Kim
• [PATCH v2] ARM: S3C24XX: Move s3c2443-clock.c to mach-s3c24xx   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Fixup prevent bug related to 'Unchecked return value'   Kukjin Kim
• [PATCH v3] S3C24XX DMA resume regression fix   Kukjin Kim
• [PATCH] spi/nuc900: Remove unnecessary memset of struct nuc900_spi   Tobias Klauser
• [PATCH 0/2] ARM: ixp4xx: fix compilation and oops   Marc Kleine-Budde
• [PATCH 1/2] ARM: ixp4xx: fix compilation, add gpiolib support   Marc Kleine-Budde
• [PATCH 2/2] mtd: ixp4xx: oops in ixp4xx_flash_probe   Marc Kleine-Budde
• [PATCH 1/2] ARM: ixp4xx: fix compilation, add gpiolib support   Marc Kleine-Budde
• [PATCH 2/2] mtd: ixp4xx: oops in ixp4xx_flash_probe   Marc Kleine-Budde
• [PATCH 1/2] ARM: ixp4xx: fix compilation, add gpiolib support   Marc Kleine-Budde
• [PATCH 1/2] ARM: ixp4xx: fix compilation, add gpiolib support   Marc Kleine-Budde
• [PATCH] ARM: head-nommu.S: use long distance encoding for branch instruction   Uwe Kleine-König
• [PATCH] Skip unnecessary pte makeup when clearing it.   Uwe Kleine-König
• [PATCH] Skip unnecessary pte makeup when clearing it.   Uwe Kleine-König
• [RFC PATCH 09/11] Cortex-M3: Allow the building of Cortex-M3 kernel port   Uwe Kleine-König
• [RFC PATCH 00/11] Cortex-M3 support   Uwe Kleine-König
• [PATCH 2/6] mfd: mc13xxx-core: ADC conv: wait_for_completion returns a long   Uwe Kleine-König
• [PATCH] RM: OMAP4: board-4430sdp: don't initialize value that is never used   Uwe Kleine-König
• [PATCH] modpost: Fix section warnings for ARM for many compilers   Uwe Kleine-König
• [PATCH] i.MX27: visstrim_m10: Add video support.   Uwe Kleine-König
• [RFC PATCH 00/11] Cortex-M3 support   Uwe Kleine-König
• [PATCH 1/5] ARM: protect usage of cr_alignment by #ifdef CONFIG_CPU_CP15   Uwe Kleine-König
• [PATCH 2/5] ARM: Add a printk loglevel modifier   Uwe Kleine-König
• [PATCH 3/5] ARM: force branch instructions to use long distance encoding   Uwe Kleine-König
• [PATCH 4/5] ARM: Cortex-M3: Add base support for Cortex-M3   Uwe Kleine-König
• [PATCH 5/5] ARM: Cortex-M3: Add support for exception handling   Uwe Kleine-König
• [PATCH 1/3] arm: ignore devicetree blobs.   Uwe Kleine-König
• [PATCH 2/2] ARM: OMAP: Fix section mismatch warning for platform_cpu_die()   Uwe Kleine-König
• [PATCH 5/5] ARM: Cortex-M3: Add support for exception handling   Uwe Kleine-König
• [PATCH 5/5] ARM: Cortex-M3: Add support for exception handling   Uwe Kleine-König
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Uwe Kleine-König
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Uwe Kleine-König
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Uwe Kleine-König
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Uwe Kleine-König
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Uwe Kleine-König
• [PATCH 1/4] Remove Telechips ARM subarch from MAINTAINERS   Hans J. Koch
• [PATCH v2 2/2] ARM: OMAP: sram: Add am33xx SRAM support (minimal)   Peter Korsgaard
• [PATCH 2/2] ARM: OMAP: am33xx: Hook-up am33xx support to existing cm code   Peter Korsgaard
• [PATCH 1/2] ARM: OMAP4: cminst: Add boot time __init function for cminst   Peter Korsgaard
• [PATCH 1/2] ARM: OMAP4: cminst: Add boot time __init function for cminst   Peter Korsgaard
• [PATCH] [trivial] media: Fix typo in mixer_drv.c and hdmi_drv.c   Jiri Kosina
• [PATCHv22 13/16] drivers: add Contiguous Memory Allocator   Aaro Koskinen
• [PATCH v2 0/2] Add Qualcomm MSM ADM DMAEngine driver   Vinod Koul
• [PATCH v2 0/2] Add Qualcomm MSM ADM DMAEngine driver   Vinod Koul
• [PATCH 1/1 v2] i.MX SDMA: Fix burstsize settings   Vinod Koul
• [PATCH v3] dmaengine: Add support for MEMCPY for imx-dma.   Vinod Koul
• [PATCH v3] DMA: PL330: Merge PL330 driver into drivers/dma/   Vinod Koul
• [PATCH V3 00/12] dmaengine: Pl08x and dw_dmac updates   Vinod Koul
• [PATCH 2/4] i.MX DMA: Add support for 2D transfers.   Vinod Koul
• [PATCH 0/4] dmaengine: i.MX DMA series.   Vinod Koul
• [PATCH 0/4] dmaengine: i.MX DMA series.   Vinod Koul
• [PATCH 0/2] ARM: OMAP2+: PM: miscellaneous powerdomain-related improvements   Tero Kristo
• [PATCH 0/6] arm: omap: clk/clkdm/pwrdm/voltdm changes to usecounting   Tero Kristo
• [PATCH 1/6] arm: omap: clk: add support for omap_clk_for_each   Tero Kristo
• [PATCH 2/6] arm: omap3+: voltage/pwrdm/clkdm/clock add recursive usecount tracking   Tero Kristo
• [PATCH 3/6] arm: omap3+: voltage: add support for voltagedomain usecounts   Tero Kristo
• [PATCH 4/6] arm: omap3: add manual control for mpu_iva voltdm usecounting   Tero Kristo
• [PATCH 5/6] arm: omap3: set autoidle flags for a few clocks   Tero Kristo
• [PATCH 6/6] arm: omap: pm-debug: enhanced usecount debug support   Tero Kristo
• [PATCH 4/6] arm: omap3: add manual control for mpu_iva voltdm usecounting   Tero Kristo
• [PATCH 6/6] arm: omap: pm-debug: enhanced usecount debug support   Tero Kristo
• [PATCHv2 0/8] arm: omap: clk/clkdm/pwrdm/voltdm usecounting changes   Tero Kristo
• [PATCHv2 1/8] arm: omap: clk: add support for omap_clk_for_each   Tero Kristo
• [PATCHv2 2/8] arm: omap3+: voltage/pwrdm/clkdm/clock add recursive usecount tracking   Tero Kristo
• [PATCHv2 3/8] arm: omap3+: voltage: add support for voltagedomain usecounts   Tero Kristo
• [PATCHv2 4/8] arm: omap3: add manual control for mpu / core pwrdm usecounting   Tero Kristo
• [PATCHv2 5/8] arm: omap3: set autoidle flags for a few clocks   Tero Kristo
• [PATCHv2 6/8] arm: omap: pm-debug: enhanced usecount debug support   Tero Kristo
• [PATCHv2 7/8] arm: omap: clockdomain: add support for preventing domain transitions   Tero Kristo
• [PATCHv2 8/8] arm: omap3: prevent per_clkdm from attempting manual domain transitions   Tero Kristo
• [PATCHv2 7/8] arm: omap: clockdomain: add support for preventing domain transitions   Tero Kristo
• [PATCHv2 8/8] arm: omap3: prevent per_clkdm from attempting manual domain transitions   Tero Kristo
• [PATCHv2 7/8] arm: omap: clockdomain: add support for preventing domain transitions   Tero Kristo
• [PATCHv9 0/5] arm: omap: smps regulator support   Tero Kristo
• [PATCHv9 1/5] TEMP: arm: OMAP3: beagle rev-c4: enable OPP6   Tero Kristo
• [PATCHv9 2/5] arm: omap3: voltage: fix channel configuration   Tero Kristo
• [PATCHv9 3/5] arm: omap3: add common twl configurations for vdd1 and vdd2   Tero Kristo
• [PATCHv9 4/5] regulator: twl4030: add support for external voltage get/set   Tero Kristo
• [PATCHv9 5/5] arm: omap3: twl: add external controllers for core voltage regulators   Tero Kristo
• [PATCHv2 8/8] arm: omap3: prevent per_clkdm from attempting manual domain transitions   Tero Kristo
• [PATCHv2 8/8] arm: omap3: prevent per_clkdm from attempting manual domain transitions   Tero Kristo
• [PATCHv2 8/8] arm: omap3: prevent per_clkdm from attempting manual domain transitions   Tero Kristo
• [PATCHv2 8/8] arm: omap3: prevent per_clkdm from attempting manual domain transitions   Tero Kristo
• [PATCH] arm: smp-twd: check for uninitialized clock in twd_cpufreq_init   Tero Kristo
• [PATCHv9 3/5] arm: omap3: add common twl configurations for vdd1 and vdd2   Tero Kristo
• [PATCH] arm: smp-twd: check for uninitialized clock in twd_cpufreq_init   Tero Kristo
• [PATCHv10 0/4] omap smps regulator support   Tero Kristo
• [PATCHv10 1/4] TEMP: OMAP3: beagle rev-c4: enable OPP6   Tero Kristo
• [PATCHv10 2/4] omap3: voltage: fix channel configuration   Tero Kristo
• [PATCHv10 3/4] omap3: add common twl configurations for vdd1 and vdd2   Tero Kristo
• [PATCHv10 4/4] omap3: twl: add external controllers for core voltage regulators   Tero Kristo
• [PATCHv5 00/14] arm: omap3: auto-ret / auto-off support   Tero Kristo
• [PATCHv5 01/14] arm: OMAP3+: PM: VP: use uV for max and min voltage limits   Tero Kristo
• [PATCHv5 02/14] arm: omap: voltage: renamed vp_vddmin and vp_vddmax fields   Tero Kristo
• [PATCHv5 03/14] arm: omap3+: voltage: parameter segregation   Tero Kristo
• [PATCHv5 04/14] arm: omap: voltage: add definition for pmic startup / shutdown times   Tero Kristo
• [PATCHv5 05/14] arm: omap4: add pmic startup / shutdown times   Tero Kristo
• [PATCHv5 06/14] arm: omap: add support for oscillator setup   Tero Kristo
• [PATCHv5 07/14] arm: omap3+: vp: use new vp_params for calculating vddmin and vddmax   Tero Kristo
• [PATCHv5 08/14] arm: omap3+: voltage: use oscillator data to calculate setup times   Tero Kristo
• [PATCHv5 09/14] arm: omap4: use pmic params for calculating pmic setup times   Tero Kristo
• [PATCHv5 10/14] TEMP: arm: OMAP3: beagle rev-c4: enable OPP6   Tero Kristo
• [PATCHv5 11/14] arm: omap: beagle: set oscillator startup time to 10ms for rev c4   Tero Kristo
• [PATCHv5 12/14] arm: omap3: vc: auto_ret / auto_off support   Tero Kristo
• [PATCHv5 13/14] arm: omap3: voltage: fix channel configuration   Tero Kristo
• [PATCHv5 14/14] arm: omap: pm: wait for domain wakeup if changing state of idle domain   Tero Kristo
• [PATCHv5 02/14] arm: omap: voltage: renamed vp_vddmin and vp_vddmax fields   Tero Kristo
• [PATCHv10 3/4] omap3: add common twl configurations for vdd1 and vdd2   Tero Kristo
• [PATCHv2 8/8] arm: omap3: prevent per_clkdm from attempting manual domain transitions   Tero Kristo
• [PATCHv5 03/14] arm: omap3+: voltage: parameter segregation   Tero Kristo
• [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators   Tero Kristo
• [PATCH 0/6] ARM: OMAP4: core retention support   Tero Kristo
• [PATCH 1/6] arm: omap4: suspend: Program all domains to RET   Tero Kristo
• [PATCH 2/6] ARM: OMAP4 PM: Add IO Daisychain support   Tero Kristo
• [PATCH 3/6] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux   Tero Kristo
• [PATCH 4/6] arm: omap4: prm: fix interrupt register offsets   Tero Kristo
• [PATCH 5/6] ARM: OMAP4: suspend: Do not get dsp/tesla out of reset   Tero Kristo
• [PATCH 6/6] arm: omap3+: add prcm chain interrupts to the interrupt list   Tero Kristo
• [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators   Tero Kristo
• [PATCHv2 8/8] arm: omap3: prevent per_clkdm from attempting manual domain transitions   Tero Kristo
• [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators   Tero Kristo
• [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators   Tero Kristo
• [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators   Tero Kristo
• [PATCH 3/6] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux   Tero Kristo
• [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators   Tero Kristo
• [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators   Tero Kristo
• [PATCHv2 0/6] ARM: OMAP4 core retention support   Tero Kristo
• [PATCHv2 1/6] ARM: OMAP4: suspend: Program all domains to retention   Tero Kristo
• [PATCHv2 2/6] ARM: OMAP4 PM: Add IO Daisychain support   Tero Kristo
• [PATCHv2 3/6] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux   Tero Kristo
• [PATCHv2 4/6] ARM: OMAP4: prm: fix interrupt register offsets   Tero Kristo
• [PATCHv2 5/6] ARM: OMAP4: hwmod_data: Do not get DSP out of reset at boot time   Tero Kristo
• [PATCHv2 6/6] ARM: OMAP3+: add prcm chain interrupts to the interrupt list   Tero Kristo
• [PATCHv2] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators   Tero Kristo
• [PATCH 0/6] ARM: OMAP4: core retention support   Tero Kristo
• [PATCHv2 8/8] arm: omap3: prevent per_clkdm from attempting manual domain transitions   Tero Kristo
• [PATCHv2 5/6] ARM: OMAP4: hwmod_data: Do not get DSP out of reset at boot time   Tero Kristo
• [PATCHv2 8/8] arm: omap3: prevent per_clkdm from attempting manual domain transitions   Tero Kristo
• [PATCHv3 0/6] ARM: OMAP3PLUS: IO daisychain support fixes   Tero Kristo
• [PATCHv3 1/6] ARM: OMAP3 PM: correct enable/disable of daisy io chain   Tero Kristo
• [PATCHv3 2/6] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file   Tero Kristo
• [PATCHv3 3/6] ARM: OMAP4 PM: Add IO Daisychain support   Tero Kristo
• [PATCHv3 4/6] ARM: OMAP3 PM: Enable IO Wake up   Tero Kristo
• [PATCHv3 5/6] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux   Tero Kristo
• [PATCHv3 6/6] ARM: OMAP3 PM: Remove IO Daisychain control from cpuidle   Tero Kristo
• [PATCHv3 0/4] ARM: OMAP4: core retention support   Tero Kristo
• [PATCHv3 1/4] ARM: OMAP4: suspend: Program all domains to retention   Tero Kristo
• [PATCHv3 2/4] ARM: OMAP4: prm: fix interrupt register offsets   Tero Kristo
• [PATCHv3 3/4] TEMP: ARM: OMAP4: hwmod_data: Do not get DSP out of reset at boot time   Tero Kristo
• [PATCHv3 4/4] ARM: OMAP3+: add prcm chain interrupts to the interrupt list   Tero Kristo
• [PATCHv2 8/8] arm: omap3: prevent per_clkdm from attempting manual domain transitions   Tero Kristo
• [PATCH 3/9] ARM/USB: at91/ohci-at91: remove the use of irq_to_gpio   Greg Kroah-Hartman
• ARM: OMAP: patches for stable   Greg Kroah-Hartman
• ARM: OMAP: patches for stable   Greg Kroah-Hartman
• [PATCH v3] ARM: LPC32xx: USB Support   Greg Kroah-Hartman
• [RESUBMIT][PATCH v2 0/4] Amstrad Delta: access MODEM_RESET GPIO pin over a regulator   Janusz Krzysztofik
• [RESUBMIT][PATCH v2 1/4] ARM: OMAP1: ams-delta: set up regulator over modem reset GPIO pin   Janusz Krzysztofik
• [RESUBMIT][PATCH v2 3/4] ARM: OMAP1: ams-delta: update the modem to use regulator API   Janusz Krzysztofik
• [RESUBMIT][PATCH v2 4/4] ASoC: OMAP: ams-delta: drop .set_bias_level callback   Janusz Krzysztofik
• [PATCH] ARM: OMAP: update omap1 and omap2plus defconfigs   Janusz Krzysztofik
• [PATCH] ARM: OMAP1: ams-delta: clean up init data section assignments   Janusz Krzysztofik
• [PATCH] ARM: OMAP1: ams-delta: correct init data section assignments   Janusz Krzysztofik
• [PATCH] ARM: OMAP1: ams-delta: fix incorrect section tags   Janusz Krzysztofik
• [PATCH v2] ARM: OMAP1: ams-delta: clean up init data section assignments   Janusz Krzysztofik
• [RFC 00/11]O MAP/ASoC: Move and merge McBSP driver under ASoC   Janusz Krzysztofik
• [RFC PATCH v4 0/4] Consolidate cpuidle timekeeping and irq enabling   Amit Kucheria
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Amit Kucheria
• [PATCH] efikamx: match machine descriptions with legacy   Amit Kucheria
• [PATCH v5 0/9] Consolidate cpuidle functionality   Amit Kucheria
• [PATCH] arch/arm/mach-msm: linux/gpio.h included twice   Danny Kukawka
• [PATCH] arch/arm/mach-pxa/pxa27x.c: included linux/device.h twice   Danny Kukawka
• [PATCH] arch/arm/mach-pxa/pxa27x.c: included linux/gpio.h twice   Danny Kukawka
• [PATCH] arch/arm/mach-ux500/board-mop500-u8500uib.c: included linux/gpio.h twice   Danny Kukawka
• [PATCH] arch/arm/plat-omap/clock.c: included linux/debugfs.h twice   Danny Kukawka
• [PATCH] arch/arm/mach-vexpress/v2m.c: included linux/device.h twice   Danny Kukawka
• [PATCH] arch/arm/mach-tegra/board-dt-tegra20.c: included asm/hardware/gic.h twice   Danny Kukawka
• [PATCH] arch/arm/mach-omap2/: included some headers twice   Danny Kukawka
• [PATCH] arch/arm/mach-mmp/: some files include some headers twice   Danny Kukawka
• [PATCH] arch/arm/mach-pxa/: included linux/gpio.h twice   Danny Kukawka
• [PATCH] arch/arm/mach-bcmring/dma.c: included linux/sched.h twice   Danny Kukawka
• [PATCH] arch/arm/mach-ks8695/leds.c: included linux/gpio.h twice   Danny Kukawka
• [PATCH] arch/arm/mach-shmobile/board-ag5evm.c: included linux/dma-mapping.h twice   Danny Kukawka
• [PATCH] arch/arm/mach-bcmring/dma.c: included linux/sched.h twice   Danny Kukawka
• [PATCH] arch/arm/mach-ks8695/leds.c: included linux/gpio.h twice   Danny Kukawka
• [PATCH V3 00/12] dmaengine: Pl08x and dw_dmac updates   Viresh Kumar
• [PATCH V3 01/12] dmaengine/dw_dmac: Hibernation support in dw_dmac   Viresh Kumar
• [PATCH V3 02/12] dmaengine: Add flow controller information to dma_slave_config   Viresh Kumar
• [PATCH V3 03/12] dmaengine: Pass dma_slave_config .device_fc = NULL for all existing users   Viresh Kumar
• [PATCH V3 04/12] dmaengine/amba-pl08x: Take flow controller info from DMA_SLAVE_CONFIG   Viresh Kumar
• [PATCH V3 05/12] dmaengine/dw_dmac: Don't use magic number for total number of channels   Viresh Kumar
• [PATCH V3 06/12] dmaengine/dw_dmac: Use dev_get_platdata() instead of accessing dev directly   Viresh Kumar
• [PATCH V3 07/12] dmaengine/dw_dmac: Don't handle block interrupts   Viresh Kumar
• [PATCH V3 08/12] dmaengine/dw_dmac: Unmap all memory buffers after completion of non-slave transfers   Viresh Kumar
• [PATCH V3 09/12] dmaengine/dw_dmac: Add 64 bit access width support for slave xfers on mem side   Viresh Kumar
• [PATCH V3 10/12] dmaengine/dw_dmac: Add support for DMA_SLAVE_CONFIG   Viresh Kumar
• [PATCH V3 11/12] dmaengine/dw_dmac: Fix dw_dmac user drivers to adapt to slave_config changes   Viresh Kumar
• [PATCH V3 12/12] dmaengine/dw_dmac: Remove unused fields in struct dw_dma_slave   Viresh Kumar
• [PATCH V3 08/12] dmaengine/dw_dmac: Unmap all memory buffers after completion of non-slave transfers   Viresh Kumar
• Query: When will drv->poweroff() called   Viresh Kumar
• [PATCH] gpio/gpio-pl061: No need of thaw and poweroff routines for hibernate   Viresh Kumar
• [PATCH] amba/serial.h: Include types.h for resolving dependency of type bool   Viresh Kumar
• [PATCH] arm/spear600: fix one-shot timer   Viresh Kumar
• [PATCH] ARM/sp810: introduce API to change system mode   Viresh Kumar
• [PATCH] arm/io.h: add macros to read/write big/little endian register   Viresh Kumar
• [PATCH] ARM/sp810: introduce API to change system mode   Viresh Kumar
• [PATCH] arm/io.h: add macros to read/write big/little endian register   Viresh Kumar
• [PATCH] watchdog/sp805: add pm callbacks to support standby/S2R/hibernation   Viresh Kumar
• [PATCH] ARM/sp810: introduce API to change system mode   Viresh Kumar
• [PATCH v2] ARM: LPC32xx: Ethernet driver   David Laight
• [PATCH] arm: Set ARCH_NR_GPIO to 355 on U8500 platforms   Philippe Langlais
• [PATCH] mach-ux500: Fix around AB8500 GPIO macro name   Philippe Langlais
• [PATCH] ux500: Remove keyboard pin definition for snowball   Philippe Langlais
• [PATCH] use devm_ functions   Julia Lawall
• [PATCH] drivers/media/video/s5p-tv/*_drv.c: use devm_ functions   Julia Lawall
• [PATCH 1/2] ARM: EXYNOS: Add files about definition of C2C   Kisang Lee
• [PATCH 2/2] misc: c2c: Add C2C(Chip to Chip) device driver for EXYNOS   Kisang Lee
• [RFC PATCH v4 2/4] ARM: omap: Remove cpuidle timekeeping and irq enable/disable   Rob Lee
• [RFC PATCH v4 1/4] cpuidle: Add time keeping and irq enabling   Rob Lee
• [RFC PATCH v4 1/4] cpuidle: Add time keeping and irq enabling   Rob Lee
• [RFC PATCH v4 0/4] Consolidate cpuidle timekeeping and irq enabling   Rob Lee
• [PATCH V6 1/5] ARM: exynos: Add support AFTR mode on EXYNOS4210   Rob Lee
• [RFC PATCH v4 0/4] Consolidate cpuidle timekeeping and irq enabling   Rob Lee
• [PATCH 3/4] at91 : remove wait_for_interrupt definition   Rob Lee
• [PATCH v5 2/9] SH: shmobile: cpuidle consolidation   Rob Lee
• [PATCH v5 1/9] cpuidle: Add commonly used functionality for consolidation   Rob Lee
• [PATCH v5 3/9] ARM: omap: Consolidate OMAP3 cpuidle time keeping and irq enable   Rob Lee
• [PATCH v5 1/9] cpuidle: Add commonly used functionality for consolidation   Rob Lee
• [PATCH v5 1/9] cpuidle: Add commonly used functionality for consolidation   Rob Lee
• [PATCH v5 1/9] cpuidle: Add commonly used functionality for consolidation   Rob Lee
• [PATCH v5 1/9] cpuidle: Add commonly used functionality for consolidation   Rob Lee
• [PATCH v5 1/9] cpuidle: Add commonly used functionality for consolidation   Rob Lee
• [PATCH v6 1/9] cpuidle: Add common time keeping and irq enabling   Rob Lee
• [PATCH v6 1/9] cpuidle: Add common time keeping and irq enabling   Rob Lee
• [PATCH v6 5/9] ARM: davinci: Consolidate time keeping and irq enable   Rob Lee
• [PATCH v6 1/9] cpuidle: Add common time keeping and irq enabling   Rob Lee
• [PATCH v5 0/9] Consolidate cpuidle functionality   Robert Lee
• [PATCH v5 1/9] cpuidle: Add commonly used functionality for consolidation   Robert Lee
• [PATCH v5 2/9] SH: shmobile: cpuidle consolidation   Robert Lee
• [PATCH v5 3/9] ARM: omap: Consolidate OMAP3 cpuidle time keeping and irq enable   Robert Lee
• [PATCH v5 4/9] ARM: omap: Consolidate OMAP4 cpuidle time keeping and irq enable   Robert Lee
• [PATCH v5 5/9] ARM: shmobile: Consolidate cpuidle functionality   Robert Lee
• [PATCH v5 6/9] ARM: davinci: Consolidate cpuidle functionality   Robert Lee
• [PATCH v5 7/9] ARM: exynos: Consolidate cpuidle functionality   Robert Lee
• [PATCH v5 8/9] ARM: kirkwood: Consolidate cpuidle functionality   Robert Lee
• [PATCH v5 9/9] ARM: at91: Consolidate cpuidle functionality   Robert Lee
• [PATCH v6 0/9] Consolidate cpuidle functionality   Robert Lee
• [PATCH v6 1/9] cpuidle: Add common time keeping and irq enabling   Robert Lee
• [PATCH v6 2/9] ARM: at91: Consolidate time keeping and irq enable   Robert Lee
• [PATCH v6 3/9] ARM: exynos: Consolidate time keeping and irq enable   Robert Lee
• [PATCH v6 4/9] ARM: kirkwood: Consolidate time keeping and irq enable   Robert Lee
• [PATCH v6 5/9] ARM: davinci: Consolidate time keeping and irq enable   Robert Lee
• [PATCH v6 6/9] ARM: omap: Consolidate OMAP3 time keeping and irq enable   Robert Lee
• [PATCH v6 7/9] ARM: omap: Consolidate OMAP4 time keeping and irq enable   Robert Lee
• [PATCH v6 8/9] ARM: shmobile: Consolidate time keeping and irq enable   Robert Lee
• [PATCH v6 9/9] SH: shmobile: Consolidate time keeping and irq enable   Robert Lee
• [PATCH v7 0/9] Consolidate cpuidle functionality   Robert Lee
• [PATCH v7 1/9] cpuidle: Add common time keeping and irq enabling   Robert Lee
• [PATCH v7 2/9] ARM: at91: Consolidate time keeping and irq enable   Robert Lee
• [PATCH v7 3/9] ARM: exynos: Consolidate time keeping and irq enable   Robert Lee
• [PATCH v7 4/9] ARM: kirkwood: Consolidate time keeping and irq enable   Robert Lee
• [PATCH v7 5/9] ARM: davinci: Consolidate time keeping and irq enable   Robert Lee
• [PATCH v7 6/9] ARM: omap: Consolidate OMAP3 time keeping and irq enable   Robert Lee
• [PATCH v7 7/9] ARM: omap: Consolidate OMAP4 time keeping and irq enable   Robert Lee
• [PATCH v7 8/9] ARM: shmobile: Consolidate time keeping and irq enable   Robert Lee
• [PATCH v7 9/9] SH: shmobile: Consolidate time keeping and irq enable   Robert Lee
• [PATCH 0/2] add ehci-s5p AHB burst function   Sangwook Lee
• [PATCH 1/2] ARM: EXYNOS: Add EHCI AHB burst function   Sangwook Lee
• [PATCH 2/2] USB: ehci-s5p: add function for burst   Sangwook Lee
• [PATCH 1/2] ARM: EXYNOS: Add EHCI AHB burst function   Sangwook Lee
• [PATCH 1/2] ARM: EXYNOS: Add EHCI AHB burst function   Sangwook Lee
• oprofile and ARM A9 hardware counter   Ming Lei
• [PATCH] arm: omap4: allow disabling MPU local timer if 32K timer is enabled   Ming Lei
• [PATCH] arm: omap4: allow disabling MPU local timer if 32K timer is enabled   Ming Lei
• [PATCH] arm: omap4: allow disabling MPU local timer if 32K timer is enabled   Ming Lei
• Possible circular locking dependency (3.3-rc2)   Ming Lei
• Possible circular locking dependency (3.3-rc2)   Ming Lei
• oprofile and ARM A9 hardware counter   Ming Lei
• oprofile and ARM A9 hardware counter   Ming Lei
• oprofile and ARM A9 hardware counter   Ming Lei
• oprofile and ARM A9 hardware counter   Ming Lei
• oprofile and ARM A9 hardware counter   Ming Lei
• [PATCH] ARM: perf: limit sample_period to half max_period in non-sampling mode   Ming Lei
• [PATCH] ARM: perf: limit sample_period to half max_period in non-sampling mode   Ming Lei
• [PATCH] ARM: perf: do not handle deleted counter in irq handler to avoid oops   Ming Lei
• [PATCH] ARM: perf: do not handle deleted counter in irq handler to avoid oops   Ming Lei
• [PATCH 2/2] ARM: perf: check that we have an event in the PMU IRQ handlers   Ming Lei
• [PATCH] ARM: perf: do not handle deleted counter in irq handler to avoid oops   Ming Lei
• [PATCH] ARM: perf: do not handle deleted counter in irq handler to avoid oops   Ming Lei
• [PATCH 3/4] ARM: perf: check that we have an event in the PMU IRQ handlers   Ming Lei
• [PATCH 2/4] ARM: perf: clear overflow flag when disabling counter on ARMv7 PMU   Ming Lei
• [PATCH 3/4] ARM: perf: check that we have an event in the PMU IRQ handlers   Ming Lei
• [PATCH 3/4] ARM: perf: check that we have an event in the PMU IRQ handlers   Ming Lei
• [PATCH 3/4] ARM: perf: check that we have an event in the PMU IRQ handlers   Ming Lei
• [PATCH] mach-kirkwood: Support for DLink DNS-320 & DNS-325 NAS   Jamie Lentin
• [PATCH v3 6/6] mmc: sdhci-s3c: Add device tree support   Karol Lewandowski
• [PATCH] gpio: samsung: adapt to changes in gpio specifier translator function declaration   Karol Lewandowski
• [PATCH 1/4] i2c/gpio-i2c add: add DT support   Karol Lewandowski
• [PATCH 1/4] i2c/gpio-i2c add: add DT support   Karol Lewandowski
• [PATCH] ARM: EXYNOS: Adds Samsung TRATS board support   Karol Lewandowski
• [PATCH 1/4 v2] i2c/gpio: add DT support   Karol Lewandowski
• cpu_relax in busy loops question   Daniel Lezcano
• cpu_relax in busy loops question   Daniel Lezcano
• [PATCH] ux500 : decouple/recouple gic from the PRCMU   Daniel Lezcano
• [PATCH] ux500 : decouple/recouple gic from the PRCMU   Daniel Lezcano
• [PATCH] ux500 : decouple/recouple gic from the PRCMU   Daniel Lezcano
• [PATCH] ux500 : decouple/recouple gic from the PRCMU   Daniel Lezcano
• [PATCH] ux500 : decouple/recouple gic from the PRCMU   Daniel Lezcano
• [PATCH][V2] ux500 : decouple/recouple gic from the PRCMU   Daniel Lezcano
• [PATCH][V2] ux500 : decouple/recouple gic from the PRCMU   Daniel Lezcano
• [PATCH][V2] ux500 : decouple/recouple gic from the PRCMU   Daniel Lezcano
• [PATCH][V3] ux500 : decouple/recouple gic from the PRCMU   Daniel Lezcano
• [PATCH][V3] ux500 : decouple/recouple gic from the PRCMU   Daniel Lezcano
• [PATCH] gic : check if there are pending interrupts   Daniel Lezcano
• [PATCH] gic : check if there are pending interrupts   Daniel Lezcano
• [PATCH 3/4] at91 : remove wait_for_interrupt definition   Daniel Lezcano
• [PATCH] gic : check if there are pending interrupts   Daniel Lezcano
• [PATCH v3 22/25] irq_domain/x86: Convert x86 (embedded) to use common irq_domain   Grant Likely
• [PATCH] gpio: samsung: adapt to changes in gpio specifier translator function declaration   Grant Likely
• [PATCH] spi/nuc900: Remove unnecessary memset of struct nuc900_spi   Grant Likely
• [RFC PATCH 7/7] ARM: davinci: add support for the am1808 based enbw_cmc board   Grant Likely
• [RFC PATCH 4/7] ARM: davinci: net: davinci_emac: add OF support   Grant Likely
• [RFC PATCH 1/2] of: Add generic device tree DMA helpers   Grant Likely
• [RFC PATCH 1/7] ARM: davinci, intc: Add OF support for TI interrupt controller   Grant Likely
• [PATCH] arm/dts: OMAP3: Add omap3evm and am335xevm support   Grant Likely
• [PATCH] irq_domain: fix the irq number of imx5 tzic   Grant Likely
• [PATCH 1/2] ARM: EXYNOS: add support GPIO for EXYNOS5250   Grant Likely
• [PATCH 1/2] ARM: EXYNOS: add support GPIO for EXYNOS5250   Grant Likely
• [PATCH v9 01/25] gpio/omap: remove dependency on gpio_bank_count   Grant Likely
• [PATCH v9 00/25] gpio/omap: driver cleanup and fixes   Grant Likely
• [PATCH] of_gpio: add support of of_gpio_named_count to be able to count named gpio   Grant Likely
• [PATCH v3 13/25] irq_domain: Remove 'new' irq_domain in favour of the ppc one   Grant Likely
• [PATCH v9 00/25] gpio/omap: driver cleanup and fixes   Grant Likely
• [PATCH] gpiolib/arches: Centralise bolierplate asm/gpio.h   Grant Likely
• [PATCH v4 2/4] irq: add irq_domain support to generic-chip   Grant Likely
• [PATCH v4 2/4] irq: add irq_domain support to generic-chip   Grant Likely
• [PATCH v3 00/25] irq_domain generalization and refinement   Grant Likely
• [PATCH v3 21/25] irqdomain/powerpc: Replace custom xlate functions with library functions   Grant Likely
• [PATCH v4 2/4] irq: add irq_domain support to generic-chip   Grant Likely
• [PATCH v3] SPI: add CSR SiRFprimaII SPI controller driver   Grant Likely
• [PATCH V3 1/1] dt: add of_get_child_count helper function   Grant Likely
• [SPI/MFD] Fix build/section mismatch warnings in da9052-spi.c   Grant Likely
• [SPI] Fix section mismatch in spi-pl022.c   Grant Likely
• [PATCH v3] SPI: add CSR SiRFprimaII SPI controller driver   Grant Likely
• [PATCH v2 03/11] ARM: EXYNOS: add clock part for EXYNOS5250 SoC   Grant Likely
• [PATCH v3 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Grant Likely
• [PATCH 1/4] ARM: at91: usb ohci add dt support   Grant Likely
• [PATCH 2/4] arm/dts: OMAP4: Add SPI controller nodes   Grant Likely
• [PATCH 0/4] spi/omap: Adaptation to Device Tree   Grant Likely
• [PATCH 1/4] spi/omap: Add DT support to McSPI driver   Grant Likely
• Possible circular locking dependency (3.3-rc2)   Grant Likely
• Possible circular locking dependency (3.3-rc2)   Grant Likely
• [PATCH v2 1/7] dt: add empty of_find_compatible_node function   Grant Likely
• [PATCH v2 7/7] ARM: imx: remove macro MXC_GPIO_IRQ_START   Grant Likely
• [PATCH v3 24/25] irq_domain: remove "hint" when allocating irq numbers   Grant Likely
• [PATCH v3 25/25] irq_domain: mostly eliminate slow-path revmap lookups   Grant Likely
• [PATCH v3 00/25] irq_domain generalization and refinement   Grant Likely
• [PATCH 1/8] irq: choose irq_domain type for generic-chip based on irq_base   Grant Likely
• [PATCH v3 24/25] irq_domain: remove "hint" when allocating irq numbers   Grant Likely
• [PATCH 2/5] gpio/omap: Use devm_ API and add request_mem_region   Grant Likely
• [PATCH v5 00/27] irq_domain generalization and rework   Grant Likely
• [PATCH v5 01/27] irq_domain: add documentation and MAINTAINERS entry.   Grant Likely
• [PATCH v5 02/27] irq_domain: Be less verbose   Grant Likely
• [PATCH v5 03/27] irq_domain: Make irq_domain structure match powerpc's irq_host   Grant Likely
• [PATCH v5 04/27] irq_domain: convert microblaze from irq_host to irq_domain   Grant Likely
• [PATCH v5 05/27] irq_domain/powerpc: Use common irq_domain structure instead of irq_host   Grant Likely
• [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Grant Likely
• [PATCH v5 07/27] irq_domain/powerpc: Eliminate virq_is_host()   Grant Likely
• [PATCH v5 08/27] irq_domain: Move irq_domain code from powerpc to kernel/irq   Grant Likely
• [PATCH v5 09/27] irq_domain: remove NO_IRQ from irq domain code   Grant Likely
• [PATCH v5 10/27] irq_domain: Remove references to old irq_host names   Grant Likely
• [PATCH v5 11/27] irq_domain: Replace irq_alloc_host() with revmap-specific initializers   Grant Likely
• [PATCH v5 12/27] irq_domain: Add support for base irq and hwirq in legacy mappings   Grant Likely
• [PATCH v5 13/27] of/address: add empty static inlines for !CONFIG_OF   Grant Likely
• [PATCH v5 14/27] mfd: twl-core.c: Fix the number of interrupts managed by twl4030   Grant Likely
• [PATCH v5 15/27] irq_domain: Remove 'new' irq_domain in favour of the ppc one   Grant Likely
• [PATCH v5 16/27] irq_domain: Remove irq_domain_add_simple()   Grant Likely
• [PATCH v5 17/27] irq_domain: Create common xlate functions that device drivers can use   Grant Likely
• [PATCH v5 18/27] irq_domain: constify irq_domain_ops   Grant Likely
• [PATCH v5 19/27] irq_domain/c6x: Convert c6x to use generic irq_domain support.   Grant Likely
• [PATCH v5 20/27] irq_domain/c6x: constify irq_domain structures   Grant Likely
• [PATCH v5 21/27] irq_domain/c6x: Use library of xlate functions   Grant Likely
• [PATCH v5 22/27] irq_domain/powerpc: constify irq_domain_ops   Grant Likely
• [PATCH v5 23/27] irq_domain/powerpc: Replace custom xlate functions with library functions   Grant Likely
• [PATCH v5 24/27] irq_domain/microblaze: Convert microblaze to use irq_domains   Grant Likely
• [PATCH v5 25/27] irq_domain: remove "hint" when allocating irq numbers   Grant Likely
• [PATCH v5 26/27] irq_domain: mostly eliminate slow-path revmap lookups   Grant Likely
• [PATCH v5 27/27] irq_domain: For NOMAP revmap, allow users to specify the largest usable virq   Grant Likely
• [PATCH v5 08/27] irq_domain: Move irq_domain code from powerpc to kernel/irq   Grant Likely
• [PATCH] gpio/gpio-pl061: No need of thaw and poweroff routines for hibernate   Grant Likely
• [GIT PULL] gpio/omap: cleanup and runtime PM conversion for v3.4   Grant Likely
• [PATCH 1/3 v2] RFC: arm/kirkwood: TEMP hack till mach-types is updated.   Grant Likely
• [PATCH 1/3 v2] RFC: arm/kirkwood: TEMP hack till mach-types is updated.   Grant Likely
• [PATCH 2/3 v4] arm: kirkwood: add dreamplug (fdt) support.   Grant Likely
• [PATCH v3 22/25] irq_domain/x86: Convert x86 (embedded) to use common irq_domain   Grant Likely
• [PATCH 1/2 v5] arm: kirkwood: add dreamplug (fdt) support.   Grant Likely
• [PATCH 1/2 v5] arm: kirkwood: add dreamplug (fdt) support.   Grant Likely
• [PATCH v3 22/25] irq_domain/x86: Convert x86 (embedded) to use common irq_domain   Grant Likely
• status = "okay" vs. "disabled" in soc.dtsi or board.dts   Grant Likely
• [PATCH v3 0/2] Device tree support for TWL regulators   Grant Likely
• [PATCH v2] pxa/hx4700: add platform device and I2C info for AK4641 codec   Axel Lin
• [PATCH RESEND] ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probe   Axel Lin
• [PATCH] ARM: ptrace: Include linux/audit.h to fix build errors   Axel Lin
• [PATCH RESNED] pxa/hx4700: add platform device and I2C info for AK4641 codec   Axel Lin
• [PATCH 1/2] ARM: U300: Don't specify regulator consumers by struct device   Axel Lin
• [PATCH 2/2] ARM: imx/pcm038: Don't specify regulator consumers by struct device   Axel Lin
• [PATCH 1/2] ALSA: Remove __devinit annotation for pxa2xx_ac97_hw_probe to fix section mismatch warning   Axel Lin
• [PATCH 2/2] ALSA: pxa2xx-pcm: replace 0xffffffff with DMA_BIT_MASK macro   Axel Lin
• [PATCH 1/2] ALSA: Remove __devinit annotation for pxa2xx_ac97_hw_probe to fix section mismatch warning   Axel Lin
• [PATCH] ASoC: Add __devinit annotation for pxa2xx_ac97_probe   Axel Lin
• [GIT PULL] [v3.3] fixes for arch-pxa in arm   Axel Lin
• Reg pinmux driver for OMAP based SoC- AM335X   Tony Lindgren
• [PATCH v2] pinctrl: pin configuration states   Tony Lindgren
• Pinmux bindings proposal V2   Tony Lindgren
• [PATCH V2 1/4] pinctrl: add a driver for NVIDIA Tegra   Tony Lindgren
• [PATCH 0/2] Initial DT only generic pinctrl-simple driver   Tony Lindgren
• [PATCH 1/2] pinmux: Export pinmux_register_mappings for pinmux modules   Tony Lindgren
• [PATCH 2/2] pinctrl: Add simple pinmux driver using device tree data   Tony Lindgren
• Reg pinmux driver for OMAP based SoC- AM335X   Tony Lindgren
• Pinmux bindings proposal V2   Tony Lindgren
• [PATCH v2] pinctrl: pin configuration states   Tony Lindgren
• [PATCH 2/2] pinctrl: Add simple pinmux driver using device tree data   Tony Lindgren
• Pinmux bindings proposal V2   Tony Lindgren
• [PATCH 2/2] pinctrl: Add simple pinmux driver using device tree data   Tony Lindgren
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Tony Lindgren
• [PATCH v3 00/25] irq_domain generalization and refinement   Tony Lindgren
• An extremely simplified pinctrl bindings proposal   Tony Lindgren
• An extremely simplified pinctrl bindings proposal   Tony Lindgren
• An extremely simplified pinctrl bindings proposal   Tony Lindgren
• [PATCH 3/3] ARM: remove empty disable_fiq and arch_ret_to_user macros   Tony Lindgren
• An extremely simplified pinctrl bindings proposal   Tony Lindgren
• [PATCH] ARM: OMAP2: Fix the OMAP2 only build break seen with 2011+ ARM tool-chains   Tony Lindgren
• [PATCH] arm: omap3: cm-t35: fix section mismatch warning   Tony Lindgren
• [PATCH 01/16] ARM: omap: fix oops in arch/arm/mach-omap2/vp.c when pmic is not found   Tony Lindgren
• [PATCH 04/16] ARM: omap: fix prm44xx.c OMAP44XX_IRQ_PRCM build error   Tony Lindgren
• [PATCH 05/16] ARM: omap: fix vc.c PMIC error message   Tony Lindgren
• [PATCH 06/16] ARM: omap: fix uninformative vc/i2c configuration error message   Tony Lindgren
• [PATCH 08/16] ARM: omap: fix section mismatch warning in mux.c   Tony Lindgren
• [PATCH 09/16] ARM: omap: preemptively fix section mismatch in omap4_sdp4430_wifi_mux_init()   Tony Lindgren
• [PATCH 10/16] ARM: omap: fix section mismatch warning for omap_secondary_startup()   Tony Lindgren
• [PATCH 11/16] ARM: omap: fix section mismatch error for omap_4430sdp_display_init()   Tony Lindgren
• [PATCH 12/16] ARM: omap: fix section mismatch warning for sdp3430_twl_gpio_setup()   Tony Lindgren
• [PATCH 13/16] ARM: omap: fix section mismatch warnings in mux.c caused by hsmmc.c   Tony Lindgren
• [PATCH 14/16] ARM: omap: fix wrapped error messages in omap_hwmod.c   Tony Lindgren
• [PATCH 15/16] ARM: omap: resolve nebulous 'Error setting wl12xx data'   Tony Lindgren
• [PATCH 16/16] ARM: omap: disable cpuidle for OMAP3 platforms   Tony Lindgren
• [PATCH 00/16] rmk's patch series for fixing OMAP   Tony Lindgren
• [PATCH 14/16] ARM: omap: fix wrapped error messages in omap_hwmod.c   Tony Lindgren
• [PATCH] ARM: OMAP: update omap1 and omap2plus defconfigs   Tony Lindgren
• [PATCH 01/16] ARM: omap: fix oops in arch/arm/mach-omap2/vp.c when pmic is not found   Tony Lindgren
• [PATCH 05/16] ARM: omap: fix vc.c PMIC error message   Tony Lindgren
• [PATCH 05/16] ARM: omap: fix vc.c PMIC error message   Tony Lindgren
• [PATCH 05/16] ARM: omap: fix vc.c PMIC error message   Tony Lindgren
• [PATCH 01/16] ARM: omap: fix oops in arch/arm/mach-omap2/vp.c when pmic is not found   Tony Lindgren
• [PATCH 05/16] ARM: omap: fix vc.c PMIC error message   Tony Lindgren
• [PATCH 05/16] ARM: omap: fix vc.c PMIC error message   Tony Lindgren
• [PATCH 05/16] ARM: omap: fix vc.c PMIC error message   Tony Lindgren
• [PATCH 05/16] ARM: omap: fix vc.c PMIC error message   Tony Lindgren
• [PATCH] ARM: OMAP2xxx: PM: fix OMAP2xxx-specific UART idle bug in v3.3   Tony Lindgren
• [PATCH] omap: board-omap3evm: add required smsc911x regulators   Tony Lindgren
• [PATCH 1/2] ARM: OMAP: Get rid of reset for system timer   Tony Lindgren
• [PATCH 2/2] ARM: OMAP4: Move the barrier memboclk_steal() as part of reserve callback   Tony Lindgren
• [PATCH v9 00/25] gpio/omap: driver cleanup and fixes   Tony Lindgren
• [PATCH 2/2] pinctrl: Add simple pinmux driver using device tree data   Tony Lindgren
• [PATCH 2/2] pinctrl: Add simple pinmux driver using device tree data   Tony Lindgren
• [PATCH] omap: board-omap3evm: add required smsc911x regulators   Tony Lindgren
• Internal timers in deep sleep   Tony Lindgren
• [GIT PULL] omap fixes for v3.3-rc3   Tony Lindgren
• [PATCH] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Tony Lindgren
• [PATCH] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Tony Lindgren
• [PATCH 2/2] pinctrl: Add simple pinmux driver using device tree data   Tony Lindgren
• [PATCH] modpost: Fix section warnings for ARM for many compilers   Tony Lindgren
• [PATCH 00/15] mach/io.h cleanup and removal   Tony Lindgren
• [PATCH 00/15] mach/io.h cleanup and removal   Tony Lindgren
• [PATCH 0/3] Move most of omap io.h into omap-iomap.h   Tony Lindgren
• [PATCH 1/3] ARM: OMAP2+: Move SDRC related functions from io.h into local common.h   Tony Lindgren
• [PATCH 2/3] ARM: OMAP: Introduce omap-iomap.h and convert files depending on current io.h to use it   Tony Lindgren
• [PATCH 3/3] ARM: OMAP: Move most of io.h to omap-iomap.h   Tony Lindgren
• [PATCH 00/15] mach/io.h cleanup and removal   Tony Lindgren
• [PATCH] modpost: Fix section warnings for ARM for many compilers   Tony Lindgren
• [PATCH 0/3] Move most of omap io.h into omap-iomap.h   Tony Lindgren
• [PATCH 00/15] mach/io.h cleanup and removal   Tony Lindgren
• [PATCH 2/2] ARM: OMAP4: Move the barrier memboclk_steal() as part of reserve callback   Tony Lindgren
• [PATCH 1/2] ARM: OMAP: Get rid of reset for system timer   Tony Lindgren
• [PATCH] arm: omap: usb-host: fix compile warning   Tony Lindgren
• [PATCH 1/4] ARM: OMAP2+: board-generic: Remove un-needed .atag_offset for DT_MACHINE   Tony Lindgren
• [PATCH 6/6] arm: omap: pm-debug: enhanced usecount debug support   Tony Lindgren
• [PATCH 3.3 v2] OMAP4: PRM: fix build breakage when CONFIG_OF is not defined   Tony Lindgren
• [PATCH 00/15] mach/io.h cleanup and removal   Tony Lindgren
• [PATCH] modpost: Fix section warnings for ARM for many compilers   Tony Lindgren
• [PATCH 6/6] arm: omap: pm-debug: enhanced usecount debug support   Tony Lindgren
• [PATCH 1/4] ARM: OMAP2+: board-generic: Remove un-needed .atag_offset for DT_MACHINE   Tony Lindgren
• [PATCH 0/3] omap hsmmc init cleanup and section warning fixes for v3.4 merge window   Tony Lindgren
• [PATCH 1/3] ARM: OMAP: omap_device: Expose omap_device_{alloc, delete, register}   Tony Lindgren
• [PATCH 2/3] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins   Tony Lindgren
• [PATCH 3/3] ARM: OMAP2+: Mark omap_hsmmc_init and omap_mux related functions as __init   Tony Lindgren
• [PATCH] ARM: OMAP: convert omap_device_build() and callers to __init   Tony Lindgren
• [PATCH 2/3] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins   Tony Lindgren
• [PATCH 3/3] ARM: OMAP2+: Mark omap_hsmmc_init and omap_mux related functions as __init   Tony Lindgren
• [PATCH 2/3] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins   Tony Lindgren
• [PATCH 2/3] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins   Tony Lindgren
• [PATCH 2/3] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins   Tony Lindgren
• [PATCH 2/3] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins   Tony Lindgren
• [PATCH 3/3] ARM: OMAP2+: Mark omap_hsmmc_init and omap_mux related functions as __init   Tony Lindgren
• [PATCH 0/3] omap hsmmc init cleanup and section warning fixes for v3.4 merge window   Tony Lindgren
• [PATCH 0/3] omap hsmmc init cleanup and section warning fixes for v3.4 merge window   Tony Lindgren
• [PATCH 0/3] omap hsmmc init cleanup and section warning fixes for v3.4 merge window   Tony Lindgren
• [GIT PULL] ARM: OMAP: PM fixes for 3.3-rc   Tony Lindgren
• [RFC 01/11] ARM: OMAP: mcbsp: Convert core driver to proper platform driver   Tony Lindgren
• [RFC 02/11] OMAP: mcbsp: Move core driver under sound/soc/omap   Tony Lindgren
• [GIT PULL] ARM: OMAP: Miscellaneous DT cleanup for 3.4   Tony Lindgren
• ARM: OMAP2xxx: PM: remove obsolete timer disable code in the suspend path   Tony Lindgren
• [PATCH v3 2/3] MFD: twl6040: Convert to i2c driver, and separate it from twl core   Tony Lindgren
• [PATCH v3 0/3] MFD: twl6040: Conversion to i2c driver   Tony Lindgren
• [PATCH] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Tony Lindgren
• [PATCH 0/3] Move most of omap io.h into omap-iomap.h   Tony Lindgren
• [PATCH 0/8] Split omap plat/io.h into local iomap.h files   Tony Lindgren
• [PATCH 1/8] ARM: OMAP2+: Move DISPC L3 firewall to happen in omap_display_init()   Tony Lindgren
• [PATCH 2/8] ARM: OMAP2+: Move SDRC related functions from io.h into local common.h   Tony Lindgren
• [PATCH 3/8] ARM: OMAP: Move omap_init_consistent_dma_size() to local common.h   Tony Lindgren
• [PATCH 4/8] ARM: OMAP1: Move 16xx GPIO system clock to platform init code   Tony Lindgren
• [PATCH 5/8] ARM: OMAP1: Move most of plat/io.h into local iomap.h   Tony Lindgren
• [PATCH 6/8] ARM: OMAP2+: Move most of plat/io.h into local iomap.h   Tony Lindgren
• [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h   Tony Lindgren
• [PATCH 8/8] ARM: OMAP2+: Limit omap_read/write usage to legacy USB drivers   Tony Lindgren
• [PATCH] ARM: OMAP1: Fix out-of-bounds array access for Innovator   Tony Lindgren
• [PATCH] gpio/omap: fix wakeups on level-triggered GPIOs   Tony Lindgren
• [PATCH 8/8] ARM: OMAP2+: Limit omap_read/write usage to legacy USB drivers   Tony Lindgren
• [PATCH 1/8] ARM: OMAP2+: Move DISPC L3 firewall to happen in omap_display_init()   Tony Lindgren
• [PATCH 1/8] ARM: OMAP2+: Move DISPC L3 firewall to happen in omap_display_init()   Tony Lindgren
• [PATCH 8/8] ARM: OMAP2+: Limit omap_read/write usage to legacy USB drivers   Tony Lindgren
• [PATCH 1/7] OMAP: 4430SDP: Correct fixed regulator device ID   Tony Lindgren
• [PATCH 4/7] OMAP4: twl-common: Add twl6030 V1V8, V2V1 SMPS common configuration   Tony Lindgren
• [PATCH 5/7] OMAP: 4430SDP: Use common configuration for V1V8, V2V1 supplies   Tony Lindgren
• [PATCH 6/7] OMAP: omap4panda: Use common configuration for V1V8, V2V1 supplies   Tony Lindgren
• [PATCH v2] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Tony Lindgren
• [PATCH v2 5/7] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins   Tony Lindgren
• [PATCH v2 0/7] omap hsmmc init cleanup and section warning fixes for v3.4 merge window   Tony Lindgren
• [PATCH v2 4/4] arm/dts: OMAP3: Add mmc controller nodes and board data   Tony Lindgren
• [PATCH] ARM: OMAP: enable Bluetooth on the PandaBoard   Tony Lindgren
• [PATCH] ARM: OMAP2: fix mailbox init code   Tony Lindgren
• [PATCH] ARM: OMAP2+: Set Kconfig dependencies for PROC_DEVICETREE   Tony Lindgren
• [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ   Tony Lindgren
• [GIT PULL] omap fixes for v3.3-rc4   Tony Lindgren
• [PATCH 4/8] ARM: OMAP1: Move 16xx GPIO system clock to platform init code   Tony Lindgren
• [PATCH 5/8] ARM: OMAP1: Move most of plat/io.h into local iomap.h   Tony Lindgren
• [PATCH 6/8] ARM: OMAP2+: Move most of plat/io.h into local iomap.h   Tony Lindgren
• [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h   Tony Lindgren
• [PATCH 0/7] More omap2+ randconfig fixes   Tony Lindgren
• [PATCH 1/7] ARM: OMAP2+: Fix Kconfig dependencies for USB_ARCH_HAS_EHCI   Tony Lindgren
• [PATCH 2/7] ARM: OMAP2+: Fix OMAP_HDQ_BASE build error   Tony Lindgren
• [PATCH 3/7] ARM: OMAP2+: Fix board_mux section type conflict when OMAP_MUX is not set   Tony Lindgren
• [PATCH 4/7] ARM: OMAP2+: Fix zoom LCD backlight if TWL_CORE is not selected   Tony Lindgren
• [PATCH 5/7] ARM: OMAP2+: Fix devexit for smartreflex when CONFIG_HOTPLUG is not set   Tony Lindgren
• [PATCH 6/7] ARM: OMAP: Fix devexit for dma when CONFIG_HOTPLUG is not set   Tony Lindgren
• [PATCH 7/7] ARM: OMAP2+: Fix multiple randconfig errors with SOC_OMAP and SOC_OMAP_NOOP   Tony Lindgren
• [PATCH 4/7] ARM: OMAP2+: Fix zoom LCD backlight if TWL_CORE is not selected   Tony Lindgren
• [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h   Tony Lindgren
• [PATCH 8/8] ARM: OMAP2+: Limit omap_read/write usage to legacy USB drivers   Tony Lindgren
• [PATCH v2 4/4] arm/dts: OMAP3: Add mmc controller nodes and board data   Tony Lindgren
• [PATCH v2 5/7] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins   Tony Lindgren
• [PATCH 4/6] ARM: OMAP3: Mark only those mmc devices which use gpio_cd, as deferred   Tony Lindgren
• [PATCH 5/6] ARM: OMAP3: Modify omap_hsmmc_late_init to handle deleting mmc devices   Tony Lindgren
• [GIT PULL] ARM: OMAP: DTS updates   Tony Lindgren
• [PATCH 2/2] ARM: OMAP: Fix section mismatch warning for platform_cpu_die()   Tony Lindgren
• [GIT PULL] ARM: OMAP: IRQ domain support for INTC   Tony Lindgren
• [PATCH] ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts   Tony Lindgren
• [PATCH] ARM: OMAP2+: Remove apply_uV constraints for fixed regulator   Tony Lindgren
• [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h   Tony Lindgren
• [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix GPMC errors when CONFIG_MTD_NAND_OMAP2 is a module   Tony Lindgren
• Randconfig module build error with OMAP4_ERRATA_I688   Tony Lindgren
• [GIT PULL 2/5] First set of omap SoC related changes   Tony Lindgren
• [GIT PULL 3/5] First set of omap1 related changes   Tony Lindgren
• [GIT PULL 4/5] First round of DT related omap changes   Tony Lindgren
• [GIT PULL 5/5] Clean-up for omap   Tony Lindgren
• [GIT PULL 1/5] non-critical fixes for v3.4 merge window   Tony Lindgren
• [GIT PULL 3/5] First set of omap1 related changes   Tony Lindgren
• [GIT PULL 5/5] Clean-up for omap   Tony Lindgren
• [GIT PULL] ARM: OMAP: IRQ domain support for INTC   Tony Lindgren
• [PATCH-V1] arm/dts: Add support for TI OMAP3 EVM board   Tony Lindgren
• [PATCH] ARM: OMAP: id: Add missing break statement in omap3xxx_check_revision   Tony Lindgren
• [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h   Tony Lindgren
• [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h   Tony Lindgren
• [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h   Tony Lindgren
• [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h   Tony Lindgren
• AT91: How copy kernel code to SRAM and execute?   ARM Linux
• AT91: How copy kernel code to SRAM and execute?   ARM Linux
• In many cases softlockup can not be reported after disabling IRQ for long time   Russell King - ARM Linux
• [RFC PATCH 1/2] of: Add generic device tree DMA helpers   Russell King - ARM Linux
• [PATCH V3 08/12] dmaengine/dw_dmac: Unmap all memory buffers after completion of non-slave transfers   Russell King - ARM Linux
• OMAP3 L2/outer cache enabled in kernel (after being disabled by uBoot)?   Russell King - ARM Linux
• In many cases softlockup can not be reported after disabling IRQ for long time   Russell King - ARM Linux
• [PATCH RFC 2/2] mtd : Make the mtd_suspend return 0 if the suspend is not implemented   Russell King - ARM Linux
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Russell King - ARM Linux
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Russell King - ARM Linux
• [PATCH v4 1/2] pxa/hx4700: Add PCMCIA/CF support   Russell King - ARM Linux
• [dmaengine] [Q] jiffies value does not increase in dma_sync_wait()   Russell King - ARM Linux
• [dmaengine] [Q] jiffies value does not increase in dma_sync_wait()   Russell King - ARM Linux
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Russell King - ARM Linux
• [PATCH 1/1] arm: vfp: Raising SIGFPE on invalid floating point operation   Russell King - ARM Linux
• [PATCH 1/1] arm: vfp: Raising SIGFPE on invalid floating point operation   Russell King - ARM Linux
• [PATCH 02/13] ARM: SAMSUNG: allow the configuration of KERNEL HZ in plat-samsung   Russell King - ARM Linux
• [PATCH V6 0/7] add a generic cpufreq driver   Russell King - ARM Linux
• [PATCH 0/3] SA11x0 fixes   Russell King - ARM Linux
• [PATCH 1/3] ARM: sa11x0: fix off-by-one resource sizes   Russell King - ARM Linux
• [PATCH 2/3] ARM: sa11x0: fix sleep entry   Russell King - ARM Linux
• [PATCH 3/3] ARM: sa11x0: fix section mismatch warnings   Russell King - ARM Linux
• [PATCH 00/17] SA11x0 cleanups (mainly assabet/neponset)   Russell King - ARM Linux
• [PATCH 01/17] ARM: sa11x0: convert to use DEFINE_RES_xxx macros   Russell King - ARM Linux
• [PATCH 02/17] ARM: sa11x0: assabet: deassert QMUTE to codec while codec is unpowered   Russell King - ARM Linux
• [PATCH 03/17] ARM: sa11x0: assabet: avoid glitching GPIOs when setting outputs   Russell King - ARM Linux
• [PATCH 04/17] ARM: sa11x0: assabet: ensure that GPIO27 is driven   Russell King - ARM Linux
• [PATCH 05/17] ARM: sa11x0: neponset: fix interrupt setup   Russell King - ARM Linux
• [PATCH 06/17] ARM: sa11x0: neponset: provide function to manipulate NCR_0   Russell King - ARM Linux
• [PATCH 07/17] ARM: sa11x0: neponset: shuffle some code around   Russell King - ARM Linux
• [PATCH 08/17] ARM: sa11x0: neponset: add driver .owner initializer   Russell King - ARM Linux
• [PATCH 09/17] ARM: sa11x0: neponset: save and restore MDM_CTL_0   Russell King - ARM Linux
• [PATCH 10/17] ARM: sa11x0: neponset: dynamically create neponset child devices   Russell King - ARM Linux
• [PATCH 11/17] ARM: sa11x0: neponset: implement support for sparse IRQs   Russell King - ARM Linux
• [PATCH 12/17] ARM: sa11x0: neponset: get parent IRQ from neponset device resource   Russell King - ARM Linux
• [PATCH 13/17] ARM: sa11x0: neponset: place smc91x and sa1111 resources in neponset device   Russell King - ARM Linux
• [PATCH 14/17] ARM: sa11x0: neponset: suspend/resume in _noirq state   Russell King - ARM Linux
• [PATCH 15/17] ARM: sa11x0: assabet/neponest: create neponset device in assabet.c   Russell King - ARM Linux
• [PATCH 16/17] ARM: sa11x0: neponset: move register definitions to neponset.c   Russell King - ARM Linux
• [PATCH 17/17] ARM: sa11x0: neponset: don't static map neponset registers   Russell King - ARM Linux
• [PATCH v4 1/2] pxa/hx4700: Add PCMCIA/CF support   Russell King - ARM Linux
• [PATCH 00/20] SA1111 cleanups   Russell King - ARM Linux
• [PATCH 01/20] ARM: sa1111: fix memory request/grant setup on PM events   Russell King - ARM Linux
• [PATCH 02/20] ARM: sa1111: fix PWM state on suspend   Russell King - ARM Linux
• [PATCH 03/20] ARM: sa1111: add sa1111 core driver .owner initializer   Russell King - ARM Linux
• [PATCH 04/20] ARM: sa1111: add .owner initializer to sa1111 driver structures   Russell King - ARM Linux
• [PATCH 05/20] ARM: sa1111: finish "allow cascaded IRQs to be used by platforms"   Russell King - ARM Linux
• [PATCH 06/20] ARM: sa1111: implement support for sparse IRQs   Russell King - ARM Linux
• [PATCH 07/20] ARM: sa1111: add shutdown hook to sa1111_driver structure   Russell King - ARM Linux
• [PATCH 08/20] ARM: sa1111: add platform enable/disable functions   Russell King - ARM Linux
• [PATCH 09/20] ARM: sa11x0: badge4: move board specific ohci initialization to badge4.c   Russell King - ARM Linux
• [PATCH 10/20] ARM: sa1111: change devid to be a bitmask   Russell King - ARM Linux
• [PATCH 11/20] ARM: sa1111: provide a generic way to prevent devices from registering   Russell King - ARM Linux
• [PATCH 12/20] ARM: sa1111: delete unused physical GPIO register definitions   Russell King - ARM Linux
• [PATCH 13/20] ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c   Russell King - ARM Linux
• [PATCH 14/20] ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c   Russell King - ARM Linux
• [PATCH 15/20] ARM: sa1111: move USB interface register definitions to ohci-sa1111.c   Russell King - ARM Linux
• [PATCH 16/20] ARM: sa1111: register sa1111 devices with dmabounce in bus notifier   Russell King - ARM Linux
• [PATCH 17/20] ARM: sa1111: only setup DMA for DMA capable devices   Russell King - ARM Linux
• [PATCH 18/20] ARM: sa1111: cleanup sub-device registration and unregistration   Russell King - ARM Linux
• [PATCH 19/20] ARM: sa1111: use dev_err() rather than printk()   Russell King - ARM Linux
• [PATCH 20/20] ARM: sa11x0: don't static map sa1111   Russell King - ARM Linux
• [PATCH 0/5] SA1111 USB cleanups   Russell King - ARM Linux
• [PATCH 1/5] USB: sa1111: sparse and checkpatch cleanups   Russell King - ARM Linux
• [PATCH 2/5] USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__)   Russell King - ARM Linux
• [PATCH 3/5] USB: sa1111: reorganize ohci-sa1111.c   Russell King - ARM Linux
• [PATCH 4/5] USB: sa1111: add OHCI shutdown methods   Russell King - ARM Linux
• [PATCH 5/5] USB: sa1111: add hcd .reset method   Russell King - ARM Linux
• [PATCH 1/5] USB: sa1111: sparse and checkpatch cleanups   Russell King - ARM Linux
• [PATCH 00/17] SA11x0 cleanups (mainly assabet/neponset)   Russell King - ARM Linux
• [PATCH 00/13] sa1100fb cleanups   Russell King - ARM Linux
• [PATCH 01/13] FB: sa1100: avoid section mismatch warnings   Russell King - ARM Linux
• [PATCH 02/13] FB: sa1100: add .owner initializer to driver structure   Russell King - ARM Linux
• [PATCH 03/13] FB: sa1100: constify rgb structures   Russell King - ARM Linux
• [PATCH 04/13] FB: sa1100: convert printks to dev_xxx()   Russell King - ARM Linux
• [PATCH 05/13] FB: sa1100: combine RGB bitfield overrides into sa1100fb_mach_info   Russell King - ARM Linux
• [PATCH 06/13] FB: sa1100: move machine inf structures to <video/sa1100fb.h>   Russell King - ARM Linux
• [PATCH 07/13] FB: sa1100: move platform data to platform files   Russell King - ARM Linux
• [PATCH 08/13] FB: sa1100: remove global sa1100fb_.*_power function pointers   Russell King - ARM Linux
• [PATCH 09/13] FB: sa1100: remove assabet specific initialization   Russell King - ARM Linux
• [PATCH 10/13] FB: sa1100: use inf members directly   Russell King - ARM Linux
• [PATCH 11/13] FB: sa1100: make GPIO configuration setting safe   Russell King - ARM Linux
• [PATCH 12/13] FB: sa11x0: fix shannon GPSR/GPCR accesses   Russell King - ARM Linux
• [PATCH 13/13] FB: sa11x0: convert shannon display enable accesses to use GPIO subsystem   Russell King - ARM Linux
• [PATCH] Versatile Express: add NO_IOPORT   Russell King - ARM Linux
• [PATCH] irq: make SPARSE_IRQ an optionally hidden option   Russell King - ARM Linux
• In many cases softlockup can not be reported after disabling IRQ for long time   Russell King - ARM Linux
• [PATCHv2 0/3] clocksource: add db8500 PRCMU timer   Russell King - ARM Linux
• [BUG] Spitz charger broken (and other sharpsl warnings)?   Russell King - ARM Linux
• [BUG] Multiple definition of pcibios_max_latency   Russell King - ARM Linux
• [PATCH 2/2] misc: c2c: Add C2C(Chip to Chip) device driver for EXYNOS   Russell King - ARM Linux
• [PATCH 1/2] ARM: EXYNOS: Add files about definition of C2C   Russell King - ARM Linux
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Russell King - ARM Linux
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Russell King - ARM Linux
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Russell King - ARM Linux
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Russell King - ARM Linux
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Russell King - ARM Linux
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Russell King - ARM Linux
• [PATCH v3 00/25] irq_domain generalization and refinement   Russell King - ARM Linux
• [PATCH v3 00/25] irq_domain generalization and refinement   Russell King - ARM Linux
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Russell King - ARM Linux
• [PATCH resent v2 1/2] ioport : add DEFINE_RES_DMA_SIZE_NAMED macro   Russell King - ARM Linux
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Russell King - ARM Linux
• [PATCH v3 00/25] irq_domain generalization and refinement   Russell King - ARM Linux
• [BUG] Multiple definition of pcibios_max_latency   Russell King - ARM Linux
• Kirkwood, kernel 3.2, vmalloc region overlap, not starting up   Russell King - ARM Linux
• Kirkwood, kernel 3.2, vmalloc region overlap, not starting up   Russell King - ARM Linux
• [PATCH 2/3] ARM: make disable_fiq macro optional   Russell King - ARM Linux
• [PATCH v2 1/2] DMA: PL330: Merge PL330 driver into drivers/dma/   Russell King - ARM Linux
• [PATCH] ARM: EXYNOS: Configure ARM_NR_BANKS for EXYNOS SoC   Russell King - ARM Linux
• [PATCH v2 02/10] pwm: Allow chips to support multiple PWMs.   Russell King - ARM Linux
• [PATCH v2 02/10] pwm: Allow chips to support multiple PWMs.   Russell King - ARM Linux
• [PATCH] ARM: OMAP: update omap1 and omap2plus defconfigs   Russell King - ARM Linux
• [PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM   Russell King - ARM Linux
• [PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM   Russell King - ARM Linux
• [PATCH 00/16] rmk's patch series for fixing OMAP   Russell King - ARM Linux
• [PATCH 01/16] ARM: omap: fix oops in arch/arm/mach-omap2/vp.c when pmic is not found   Russell King - ARM Linux
• [PATCH 04/16] ARM: omap: fix prm44xx.c OMAP44XX_IRQ_PRCM build error   Russell King - ARM Linux
• [PATCH 05/16] ARM: omap: fix vc.c PMIC error message   Russell King - ARM Linux
• [PATCH 06/16] ARM: omap: fix uninformative vc/i2c configuration error message   Russell King - ARM Linux
• [PATCH 08/16] ARM: omap: fix section mismatch warning in mux.c   Russell King - ARM Linux
• [PATCH 09/16] ARM: omap: preemptively fix section mismatch in omap4_sdp4430_wifi_mux_init()   Russell King - ARM Linux
• [PATCH 10/16] ARM: omap: fix section mismatch warning for omap_secondary_startup()   Russell King - ARM Linux
• [PATCH 11/16] ARM: omap: fix section mismatch error for omap_4430sdp_display_init()   Russell King - ARM Linux
• [PATCH 12/16] ARM: omap: fix section mismatch warning for sdp3430_twl_gpio_setup()   Russell King - ARM Linux
• [PATCH 13/16] ARM: omap: fix section mismatch warnings in mux.c caused by hsmmc.c   Russell King - ARM Linux
• [PATCH 14/16] ARM: omap: fix wrapped error messages in omap_hwmod.c   Russell King - ARM Linux
• [PATCH 15/16] ARM: omap: resolve nebulous 'Error setting wl12xx data'   Russell King - ARM Linux
• [PATCH 16/16] ARM: omap: disable cpuidle for OMAP3 platforms   Russell King - ARM Linux
• [PATCH 2/3] ARM: make disable_fiq macro optional   Russell King - ARM Linux
• [PATCH 16/16] ARM: omap: disable cpuidle for OMAP3 platforms   Russell King - ARM Linux
• [PATCH 05/16] ARM: omap: fix vc.c PMIC error message   Russell King - ARM Linux
• [PATCH 05/16] ARM: omap: fix vc.c PMIC error message   Russell King - ARM Linux
• [PATCH 00/16] rmk's patch series for fixing OMAP   Russell King - ARM Linux
• [PATCH v6 13/15] ARM: hotplug: Introduce dummy_cpu_kill   Russell King - ARM Linux
• [PATCH v6 15/15] ARM: hotplug: add cpu_lowpower as an alternative to cpu_die   Russell King - ARM Linux
• [PATCH v6 02/15] ARM: SoC: Add per SoC SMP and CPU hotplug operations   Russell King - ARM Linux
• [PATCH 1/2] ARM: ixp4xx: fix compilation, add gpiolib support   Russell King - ARM Linux
• [PATCH 1/2] ARM: ixp4xx: fix compilation, add gpiolib support   Russell King - ARM Linux
• [PATCH] ARM: OMAP1: ams-delta: clean up init data section assignments   Russell King - ARM Linux
• [PATCH 01/16] ARM: omap: fix oops in arch/arm/mach-omap2/vp.c when pmic is not found   Russell King - ARM Linux
• [PATCH 05/16] ARM: omap: fix vc.c PMIC error message   Russell King - ARM Linux
• [PATCH 05/16] ARM: omap: fix vc.c PMIC error message   Russell King - ARM Linux
• [PATCH 01] ARM: omap: fix oops in arch/arm/mach-omap2/vp.c when pmic is not found   Russell King - ARM Linux
• [PATCH 05] ARM: omap: fix vc.c PMIC error message   Russell King - ARM Linux
• [PATCH] ARM: OMAP2+: Fix prm2xxx_3xxx.c INT_34XX_PRCM_MPU_IRQ build error   Russell King - ARM Linux
• [PATCH] hotplug: eliminate warning "Unknown IPI message 0x1"   Russell King - ARM Linux
• [GIT PULL] regarding PL330 driver for rmk or arm-soc, and slave-dma   Russell King - ARM Linux
• [PATCH] arm: omap4: allow disabling MPU local timer if 32K timer is enabled   Russell King - ARM Linux
• [PATCH] ARM: OMAP1: ams-delta: correct init data section assignments   Russell King - ARM Linux
• [PATCH] arm: omap4: allow disabling MPU local timer if 32K timer is enabled   Russell King - ARM Linux
• [PATCH 02/11] Revert "ARM: pxa: add dummy clock for sa1100-rtc"   Russell King - ARM Linux
• [PATCH] serial: samsung: disable irq before calling free_irq   Russell King - ARM Linux
• [BUG] Multiple definition of pcibios_max_latency   Russell King - ARM Linux
• [CPUFREQ] Fix exposure of ARM_EXYNOS4210_CPUFREQ   Russell King - ARM Linux
• [SPI/MFD] Fix build/section mismatch warnings in da9052-spi.c   Russell King - ARM Linux
• [SPI] Fix section mismatch in spi-pl022.c   Russell King - ARM Linux
• [PATCH v2 03/11] ARM: EXYNOS: add clock part for EXYNOS5250 SoC   Russell King - ARM Linux
• [PATCH v7] ARM: net: JIT compiler for packet filters   Russell King - ARM Linux
• Kirkwood, kernel 3.2, vmalloc region overlap, not starting up   Russell King - ARM Linux
• [PATCH] Optimize multi-CPU tlb flushing a little more   Russell King - ARM Linux
• [PATCH] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Russell King - ARM Linux
• [PATCH] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Russell King - ARM Linux
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Russell King - ARM Linux
• [PATCH 03/15] ARM: provide runtime hook for ioremap   Russell King - ARM Linux
• [PATCH 13/15] ARM: make mach/io.h include optional   Russell King - ARM Linux
• [PATCH] modpost: Fix section warnings for ARM for many compilers   Russell King - ARM Linux
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Russell King - ARM Linux
• [BUG] LPAE can be enabled with non-LPAE capable CPUs   Russell King - ARM Linux
• [PATCH 2/9] ARM: at91/snapper9260: move gpio_to_irq out of structure initialization   Russell King - ARM Linux
• [PATCH] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Russell King - ARM Linux
• [PATCH 2/2] ARM: OMAP4: Move the barrier memboclk_steal() as part of reserve callback   Russell King - ARM Linux
• [PATCH 2/2] ARM: OMAP4: Move the barrier memboclk_steal() as part of reserve callback   Russell King - ARM Linux
• [BUG] LPAE can be enabled with non-LPAE capable CPUs   Russell King - ARM Linux
• [PATCH 13/15] ARM: make mach/io.h include optional   Russell King - ARM Linux
• [PATCH] Optimize multi-CPU tlb flushing a little more   Russell King - ARM Linux
• [PATCH] Optimize multi-CPU tlb flushing a little more   Russell King - ARM Linux
• [PATCH 13/15] ARM: make mach/io.h include optional   Russell King - ARM Linux
• [PATCH] ARM: ptrace: Include linux/audit.h to fix build errors   Russell King - ARM Linux
• [PATCH] ARM: ptrace: Include linux/audit.h to fix build errors   Russell King - ARM Linux
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Russell King - ARM Linux
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Russell King - ARM Linux
• [PATCH] ARM: ptrace: Include linux/audit.h to fix build errors   Russell King - ARM Linux
• [PATCH] ARM: ptrace: Include linux/audit.h to fix build errors   Russell King - ARM Linux
• [PATCH] ARM: iop: add missing includes   Russell King - ARM Linux
• [PATCH v2 00/13] Make mach/irqs.h optional   Russell King - ARM Linux
• [PATCH] ARM: boot/compressed/decompress.c cleanup   Russell King - ARM Linux
• Question: how to make one page readonly on ARM   Russell King - ARM Linux
• [PATCH v2 00/13] Make mach/irqs.h optional   Russell King - ARM Linux
• [PATCH 3/3] ARM: OMAP2+: Mark omap_hsmmc_init and omap_mux related functions as __init   Russell King - ARM Linux
• [PATCH 0/3] omap hsmmc init cleanup and section warning fixes for v3.4 merge window   Russell King - ARM Linux
• ftp.arm.linux.org.uk now using dumb http git protocol   Russell King - ARM Linux
• [PATCH 0/3] omap hsmmc init cleanup and section warning fixes for v3.4 merge window   Russell King - ARM Linux
• ARM: add xz kernel compression support   Russell King - ARM Linux
• [CPUFREQ] Fix exposure of ARM_EXYNOS4210_CPUFREQ   Russell King - ARM Linux
• Query: Multiple Mappings to Mem and ARMV6+   Russell King - ARM Linux
• Query: Multiple Mappings to Mem and ARMV6+   Russell King - ARM Linux
• ftp.arm.linux.org.uk now using dumb http git protocol   Russell King - ARM Linux
• [PATCH] ARM: amba: don't include <asm/sizes.h>   Russell King - ARM Linux
• [PATCH 5/5] ARM: Cortex-M3: Add support for exception handling   Russell King - ARM Linux
• [PATCH v5 00/27] irq_domain generalization and rework   Russell King - ARM Linux
• [PATCH 0/3] omap hsmmc init cleanup and section warning fixes for v3.4 merge window   Russell King - ARM Linux
• [PATCH 0/3] omap hsmmc init cleanup and section warning fixes for v3.4 merge window   Russell King - ARM Linux
• SMP local timers and their CPUfreq notifiers setup on OMAP3   Russell King - ARM Linux
• [PATCH 2/2] ARM: dma-mapping: fix leak in consistent_init   Russell King - ARM Linux
• [PATCH 3/3] ARM: dma-mapping: fix array out of bound access   Russell King - ARM Linux
• [PATCH 3/3] ARM: dma-mapping: fix array out of bound access   Russell King - ARM Linux
• [PATCH v5 00/27] irq_domain generalization and rework   Russell King - ARM Linux
• [PATCH 1/4] ARM: sa1100: fix sa1100 after sparse irq conversion   Russell King - ARM Linux
• [PATCH 1/4] ARM: sa1100: fix sa1100 after sparse irq conversion   Russell King - ARM Linux
• [PATCH 1/4] ARM: sa1100: fix sa1100 after sparse irq conversion   Russell King - ARM Linux
• [PATCH 04/18] ARM: at91: make ST (System Timer) soc independent   Russell King - ARM Linux
• [PATCH 13/18] ARM: at91/rtc-at91sam9: pass the GPBR to use via ressources   Russell King - ARM Linux
• [PATCH 1/2] Documentation/gpio.txt: Explain expected pinctrl interaction   Russell King - ARM Linux
• [PATCH 13/18] ARM: at91/rtc-at91sam9: pass the GPBR to use via ressources   Russell King - ARM Linux
• [PATCH 1/4 v2] i2c/gpio: add DT support   Russell King - ARM Linux
• [PATCH 1/4 v2] i2c/gpio: add DT support   Russell King - ARM Linux
• [PATCH 1/4 v2] i2c/gpio: add DT support   Russell King - ARM Linux
• [PATCH 1/4 v2] i2c/gpio: add DT support   Russell King - ARM Linux
• [PATCH 1/4 v2] i2c/gpio: add DT support   Russell King - ARM Linux
• [PATCH 1/4 v2] i2c/gpio: add DT support   Russell King - ARM Linux
• [PATCH] ARM: at91/rtc-at91sam9: rework resources assignment   Russell King - ARM Linux
• [PATCH 1/4 v2] i2c/gpio: add DT support   Russell King - ARM Linux
• [PATCH 1/4 v2] i2c/gpio: add DT support   Russell King - ARM Linux
• [PATCHv2 1/6] ARM: ftrace: remove useless memory checks   Russell King - ARM Linux
• [PATCHv2 5/6] jump label: detect %c support for ARM   Russell King - ARM Linux
• Query: Multiple Mappings to Mem and ARMV6+   Russell King - ARM Linux
• [PATCH] ARM: ptrace: fix ptrace_read_user for !CONFIG_MMU platforms   Russell King - ARM Linux
• [PATCH] ARM: ptrace: fix ptrace_read_user for !CONFIG_MMU platforms   Russell King - ARM Linux
• SMP local timers and their CPUfreq notifiers setup on OMAP3   Russell King - ARM Linux
• [PATCH] ARM: ptrace: fix ptrace_read_user for !CONFIG_MMU platforms   Russell King - ARM Linux
• [PATCH] ARM: at91: AIC and GPIO IRQ device tree initilization   Russell King - ARM Linux
• [PATCH 1/2] Documentation/gpio.txt: Explain expected pinctrl interaction   Russell King - ARM Linux
• [PATCH] ARM: ptrace: fix ptrace_read_user for !CONFIG_MMU platforms   Russell King - ARM Linux
• [PATCH v2 6/6] mmc: omap_hsmmc: Don't expect MMC1 to always have vmmc supply   Russell King - ARM Linux
• [PATCH 1/2] Documentation/gpio.txt: Explain expected pinctrl interaction   Russell King - ARM Linux
• [PATCH 1/2] Documentation/gpio.txt: Explain expected pinctrl interaction   Russell King - ARM Linux
• [PATCH 1/4] ARM: sa1100: fix sa1100 after sparse irq conversion   Russell King - ARM Linux
• [PATCH - linux-next] ARM: ptrace: Fix audit caused compile error   Russell King - ARM Linux
• [PATCHv5 02/14] arm: omap: voltage: renamed vp_vddmin and vp_vddmax fields   Russell King - ARM Linux
• ARM tracehook support   Russell King - ARM Linux
• ARM tracehook support   Russell King - ARM Linux
• [PATCH 2/2] iommu/omap: fix NULL pointer dereference   Russell King - ARM Linux
• [PATCHv22 14/16] X86: integrate CMA with DMA-mapping subsystem   Russell King - ARM Linux
• [PATCH 2/2] iommu/omap: fix NULL pointer dereference   Russell King - ARM Linux
• [PATCH v2 19/19] ARM: at91/board-dt: move at91_initialize() to init_irq()   Russell King - ARM Linux
• [PATCH v2 06/19] ARM: at91/pm_slowclock: rename register to named define   Russell King - ARM Linux
• [PATCH v2 07/19] ARM: at91/pm_slowclock: function slow_clock() accepts parameters   Russell King - ARM Linux
• [PATCH v2 07/19] ARM: at91/pm_slowclock: function slow_clock() accepts parameters   Russell King - ARM Linux
• [PATCH 6/7] rtc: sa1100: enable clk support   Russell King - ARM Linux
• [PATCH v3] DMA: PL330: Merge PL330 driver into drivers/dma/   Russell King - ARM Linux
• [PATCH v3] DMA: PL330: Merge PL330 driver into drivers/dma/   Russell King - ARM Linux
• [PATCH v3] DMA: PL330: Merge PL330 driver into drivers/dma/   Russell King - ARM Linux
• AMBA devices behing a PCI bridge   Russell King - ARM Linux
• [PATCHv2 1/6] ARM: ftrace: remove useless memory checks   Russell King - ARM Linux
• [PULL] entry-macro.S clean-up and removal   Russell King - ARM Linux
• [PATCH 1/4] ARM: sa1100: fix sa1100 after sparse irq conversion   Russell King - ARM Linux
• [PULL] entry-macro.S clean-up and removal   Russell King - ARM Linux
• [PATCH 3/7] rtc: sa1100: use ioremap to map registers   Russell King - ARM Linux
• [PATCH 0/7] share sa1100 rtc driver to arch-mmp   Russell King - ARM Linux
• [PATCH v2] ARM: vectors: use gate_vma for vectors user mapping   Russell King - ARM Linux
• [PATCH] arm/io.h: add macros to read/write big/little endian register   Russell King - ARM Linux
• [PATCH 0/7] share sa1100 rtc driver to arch-mmp   Russell King - ARM Linux
• [PATCH] ARM/sp810: introduce API to change system mode   Russell King - ARM Linux
• [PATCH v2 3/7] rtc: sa1100: use ioremap to map registers   Russell King - ARM Linux
• [PATCH 4/7] ARM: sa1100: clean up of the clock support   Russell King - ARM Linux
• [PATCH 6/7] rtc: sa1100: enable clk support   Russell King - ARM Linux
• [PATCH 0/7] share sa1100 rtc driver to arch-mmp   Russell King - ARM Linux
• [PATCH 6/7] rtc: sa1100: enable clk support   Russell King - ARM Linux
• [PATCH 0/7] share sa1100 rtc driver to arch-mmp   Russell King - ARM Linux
• [PATCH] arm/io.h: add macros to read/write big/little endian register   Russell King - ARM Linux
• [PATCH] arm/io.h: add macros to read/write big/little endian register   Russell King - ARM Linux
• [PATCH] arm/io.h: add macros to read/write big/little endian register   Russell King - ARM Linux
• [PATCH 5/6] gpio/omap: fix trigger type to unsigned   Russell King - ARM Linux
• [PATCH] arm/io.h: add macros to read/write big/little endian register   Russell King - ARM Linux
• [PATCH 0/7] share sa1100 rtc driver to arch-mmp   Russell King - ARM Linux
• [PATCH] arm/io.h: add macros to read/write big/little endian register   Russell King - ARM Linux
• [PATCH v3 4/7] ARM: sa1100: clean up clock support   Russell King - ARM Linux
• [PATCH v3 5/7] ARM: pxa: add rtc dummy clock   Russell King - ARM Linux
• [PATCH 4/4] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Russell King - ARM Linux
• [PATCH 4/4] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Russell King - ARM Linux
• [PATCH] ARM: LPAE: Invalidate the TLB for module addresses during translation fault   Russell King - ARM Linux
• [PATCH 1/4] ARM: sa1100: fix sa1100 after sparse irq conversion   Russell King - ARM Linux
• [PATCH 1/4] ARM: sa1100: fix sa1100 after sparse irq conversion   Russell King - ARM Linux
• [PATCH 1/4] ARM: sa1100: fix sa1100 after sparse irq conversion   Russell King - ARM Linux
• [PATCH] ARM: LPAE: Invalidate the TLB for module addresses during translation fault   Russell King - ARM Linux
• [PATCH v2 3/4] arm/dts: OMAP4: Add mmc controller nodes and board data   Russell King - ARM Linux
• [PATCH] ARM: ptrace: fix ptrace_read_user for !CONFIG_MMU platforms   Russell King - ARM Linux
• [PATCH] gic : check if there are pending interrupts   Russell King - ARM Linux
• [PATCH 4/4] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Russell King - ARM Linux
• [PATCH 4/4] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Russell King - ARM Linux
• [PATCH 5/5] ARM: Cortex-M3: Add support for exception handling   Russell King - ARM Linux
• [PATCH 4/4] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Russell King - ARM Linux
• [PATCH 0/6] ASoC: a few cleanups on sound/soc/fsl   Russell King - ARM Linux
• [PATCH 4/4] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Russell King - ARM Linux
• [PATCH 0/6] ASoC: a few cleanups on sound/soc/fsl   Russell King - ARM Linux
• [PATCH 0/6] ASoC: a few cleanups on sound/soc/fsl   Russell King - ARM Linux
• [PATCH 3/3] ARM: PXA27x: Zipit Z2: disable wake on GPIO0   Russell King - ARM Linux
• [PATCH 2/3] ARM: PXA27x: save/restore PWER on suspend/resume   Russell King - ARM Linux
• [PATCH 2/3] ARM: PXA27x: save/restore PWER on suspend/resume   Russell King - ARM Linux
• [PATCH 3/3] ARM: PXA27x: Zipit Z2: disable wake on GPIO0   Russell King - ARM Linux
• AT91: How copy kernel code to SRAM and execute?   Russell King - ARM Linux
• AT91: How copy kernel code to SRAM and execute?   Russell King - ARM Linux
• [PATCH 3/3] ARM: PXA27x: Zipit Z2: disable wake on GPIO0   Russell King - ARM Linux
• [PATCH 2/3] ARM: PXA27x: save/restore PWER on suspend/resume   Russell King - ARM Linux
• [PATCH 2/3] ARM: PXA27x: save/restore PWER on suspend/resume   Russell King - ARM Linux
• [PATCH] pxa/hx4700: Fix basic suspend/resume   Russell King - ARM Linux
• [PATCH] ARM/sp810: introduce API to change system mode   Russell King - ARM Linux
• [PATCHv2 1/6] ARM: ftrace: remove useless memory checks   Russell King - ARM Linux
• [PATCH 3/4] at91 : remove wait_for_interrupt definition   Russell King - ARM Linux
• elf_set_personality()   Russell King - ARM Linux
• [PATCH] ARM/sp810: introduce API to change system mode   Russell King - ARM Linux
• elf_set_personality()   Russell King - ARM Linux
• elf_set_personality()   Russell King - ARM Linux
• [PATCH v3] ARM: LPC32xx: Ethernet support   Russell King - ARM Linux
• [PATCH] ARM: boot/compressed/misc.s: Include <linux/bug.h> to fix build break   Russell King - ARM Linux
• ARM: OMAP: patches for stable   Russell King - ARM Linux
• RFC: what do we do with system controllers?   Russell King - ARM Linux
• [PATCH] ARM: mx51: Fix build error due to missing include of <linux/bug.h>   Russell King - ARM Linux
• [PATCH] ARM: mx51: Fix build error due to missing include of <linux/bug.h>   Russell King - ARM Linux
• [PATCH] ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts   Russell King - ARM Linux
• [RFC PATCH 0/2] ARM: assembler: Add uniform assembler framework   Russell King - ARM Linux
• [PATCH] ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts   Russell King - ARM Linux
• [PATCH] ARM: mx51: Fix build error due to missing include of <linux/bug.h>   Russell King - ARM Linux
• RFC: what do we do with system controllers?   Russell King - ARM Linux
• [PATCH] ARM/sp810: introduce API to change system mode   Russell King - ARM Linux
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Russell King - ARM Linux
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Russell King - ARM Linux
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Russell King - ARM Linux
• IIO irq allocation fails on AT91SAM9G45   Russell King - ARM Linux
• [PATCH v2 19/28] ARM: Add fixed PCI i/o mapping   Russell King - ARM Linux
• [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h   Russell King - ARM Linux
• oprofile and ARM A9 hardware counter   David A. Long
• elf_set_personality()   Robert Love
• elf_set_personality()   Robert Love
• elf_set_personality()   Robert Love
• [PATCHv2] [ARM][Orion] Fix Orion5x GPIO regression   Andrew Lunn
• [PATCH] arm:orion: Fix USB phy for orion5x.   Andrew Lunn
• Kirkwood, kernel 3.2, vmalloc region overlap, not starting up   Andrew Lunn
• Kirkwood, kernel 3.2, vmalloc region overlap, not starting up   Andrew Lunn
• [PATCHv3] [ARM][Orion] Fix Orion5x GPIO regression from MPP cleanup   Andrew Lunn
• [PATCH v2] arm:orion: Fix USB phy for orion5x.   Andrew Lunn
• [PATCH 2/3 v4] arm: kirkwood: add dreamplug (fdt) support.   Andrew Lunn
• [PATCH v2 11/13] ARM: only include mach/irqs.h for !SPARSE_IRQ   Pavel Machek
• [PATCH 1/4] Remove Telechips ARM subarch from MAINTAINERS   Pavel Machek
• ftp.arm.linux.org.uk now using dumb http git protocol   Pavel Machek
• [PATCH] ARM: OMAP: hsmmc: add max_freq field   Daniel Mack
• [PATCH] ARM: OMAP: hsmmc: add max_freq field   Daniel Mack
• [PATCH 0/3] entry-macro.S clean-up   Ryan Mallon
• [PATCH v2 02/10] pwm: Allow chips to support multiple PWMs.   Ryan Mallon
• [PATCH 2/9] ARM: at91/snapper9260: move gpio_to_irq out of structure initialization   Ryan Mallon
• [PATCH 11/15] ARM: ep93xx: clean-up mach/io.h   Ryan Mallon
• [PATCH 1/5] ARM: protect usage of cr_alignment by #ifdef CONFIG_CPU_CP15   Ryan Mallon
• [PATCH 04/18] ARM: at91: make ST (System Timer) soc independent   Ryan Mallon
• [PATCH 10/18] ARM: at91/PMC: make register base soc independent   Ryan Mallon
• [PATCH 11/18] ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use   Ryan Mallon
• [PATCH 13/18] ARM: at91/rtc-at91sam9: pass the GPBR to use via ressources   Ryan Mallon
• [PATCH 04/18] ARM: at91: make ST (System Timer) soc independent   Ryan Mallon
• [PATCH 04/18] ARM: at91: make ST (System Timer) soc independent   Ryan Mallon
• [PATCH 04/18] ARM: at91: make ST (System Timer) soc independent   Ryan Mallon
• [PATCH] ARM: at91/rtc-at91sam9: rework resources assignment   Ryan Mallon
• [PATCH v2 03/19] ARM: at91: make matrix register base soc independent   Ryan Mallon
• [PATCH v2 02/19] ARM: at91/at91x40: remove use of at91_sys_read/write   Ryan Mallon
• [PATCH v2 04/19] ARM: at91: make ST (System Timer) soc independent   Ryan Mallon
• [PATCH v2 05/19] ARM: at91/ST: remove not needed casts   Ryan Mallon
• [PATCH v2 09/19] ARM: at91: make sdram/ddr register base soc independent   Ryan Mallon
• [PATCH v2 11/19] ARM: at91/PMC: make register base soc independent   Ryan Mallon
• [PATCH v2 16/19] ARM: at91: merge SRAM Memory banks thanks to mirroring   Ryan Mallon
• [PATCH v3 06/10] pwm: Add NVIDIA Tegra SoC support   Ryan Mallon
• [PATCH v2 02/19] ARM: at91/at91x40: remove use of at91_sys_read/write   Ryan Mallon
• [PATCH v2 11/19] ARM: at91/PMC: make register base soc independent   Ryan Mallon
• [PATCH v2 02/19] ARM: at91/at91x40: remove use of at91_sys_read/write   Ryan Mallon
• [PATCH v3 06/10] pwm: Add NVIDIA Tegra SoC support   Ryan Mallon
• [PATCH v2 09/19] ARM: at91: make sdram/ddr register base soc independent   Ryan Mallon
• [PATCH v3 17/21] ARM: at91: merge SRAM Memory banks thanks to mirroring   Ryan Mallon
• [PATCH v3 16/21] ARM: at91: finally drop at91_sys_read/write   Ryan Mallon
• [PATCH v3 11/21] ARM: at91/PMC: move assignment out of printf   Ryan Mallon
• [PATCH v3 03/10] of: Add PWM support.   Ryan Mallon
• [PATCH v3 17/21] ARM: at91: merge SRAM Memory banks thanks to mirroring   Ryan Mallon
• ARM: ep93xx: convert vision_ep9307 to MULTI_IRQ_HANDLER   Ryan Mallon
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Ryan Mallon
• [PATCH v3 0/3] Moving EMIF driver to MFD framework   Manjunathappa, Prakash
• [PATCH v3 1/3] arm:davinci: prepare to move aemif driver to drivers/mfd   Manjunathappa, Prakash
• [PATCH v3 2/3] arm:davinci: Move emif driver to drivers/mfd from mach-davinci folder   Manjunathappa, Prakash
• [PATCH v3 3/3] arm:davinci: move NAND and NOR devices as aemif MFD slaves   Manjunathappa, Prakash
• [PATCH v3 3/3] arm:davinci: move NAND and NOR devices as aemif MFD slaves   Manjunathappa, Prakash
• [PATCH v4 0/3] Moving EMIF driver to MFD framework   Manjunathappa, Prakash
• [PATCH v4 1/3] arm:davinci: prepare to move aemif driver to drivers/mfd   Manjunathappa, Prakash
• [PATCH v4 2/3] arm:davinci: move emif driver to drivers/mfd from mach-davinci folder   Manjunathappa, Prakash
• [PATCH v4 3/3] arm:davinci: move NAND and NOR devices as aemif MFD slaves   Manjunathappa, Prakash
• [PATCH v4 0/3] Moving EMIF driver to MFD framework   Manjunathappa, Prakash
• [PATCH v4 2/3] arm:davinci: move emif driver to drivers/mfd from mach-davinci folder   Manjunathappa, Prakash
• [PATCH v5 0/3]Move davinci emif driver to MFD from platform code   Manjunathappa, Prakash
• [PATCH v5 1/3] arm:davinci: prepare to move aemif driver to drivers/mfd   Manjunathappa, Prakash
• [PATCH v5 2/3] arm:davinci: move emif driver to mfd framework   Manjunathappa, Prakash
• [PATCH v5 3/3] arm:davinci: move NAND and NOR devices as emif MFD slaves   Manjunathappa, Prakash
• [PATCH v5 2/3] arm:davinci: move emif driver to mfd framework   Manjunathappa, Prakash
• [PATCH v5 2/3] arm:davinci: move emif driver to mfd framework   Manjunathappa, Prakash
• OMAP3 L2/outer cache enabled in kernel (after being disabled by uBoot)?   Catalin Marinas
• [RFC] ARM hugetlb support   Catalin Marinas
• OMAP3 L2/outer cache enabled in kernel (after being disabled by uBoot)?   Catalin Marinas
• [PATCH] Skip unnecessary pte makeup when clearing it.   Catalin Marinas
• [PATCH] Versatile Express: add NO_IOPORT   Catalin Marinas
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Catalin Marinas
• [PATCH 4/7] Store huge page linux pte in mm_struct   Catalin Marinas
• [PATCH 2/7] Add various hugetlb page table fix   Catalin Marinas
• [RFC] ARM hugetlb support   Catalin Marinas
• [PATCH 1/7] Add various hugetlb arm high level hooks   Catalin Marinas
• [PATCH 2/7] Add various hugetlb page table fix   Catalin Marinas
• [PATCH 1/7] Add various hugetlb arm high level hooks   Catalin Marinas
• [PATCH 1/7] Add various hugetlb arm high level hooks   Catalin Marinas
• [PATCH 2/7] Add various hugetlb page table fix   Catalin Marinas
• [PATCH 2/7] Add various hugetlb page table fix   Catalin Marinas
• Question on ARM Cortex R4 support in Linux   Catalin Marinas
• Question on ARM Cortex R4 support in Linux   Catalin Marinas
• [BUG] LPAE can be enabled with non-LPAE capable CPUs   Catalin Marinas
• Query: Multiple Mappings to Mem and ARMV6+   Catalin Marinas
• Oops in guest after ioremap() on ARMv7   Catalin Marinas
• Query: Multiple Mappings to Mem and ARMV6+   Catalin Marinas
• Query: Multiple Mappings to Mem and ARMV6+   Catalin Marinas
• Question on ARM Cortex R4 support in Linux   Catalin Marinas
• Question on ARM Cortex R4 support in Linux   Catalin Marinas
• Query: Multiple Mappings to Mem and ARMV6+   Catalin Marinas
• Question on ARM Cortex R4 support in Linux   Catalin Marinas
• [PATCH] ARM: LPAE: Invalidate the TLB for module addresses during translation fault   Catalin Marinas
• [PATCH] ARM: LPAE: Invalidate the TLB for module addresses during translation fault   Catalin Marinas
• [PATCH] ARM: LPAE: Invalidate the TLB for module addresses during translation fault   Catalin Marinas
• [PATCH] ARM: LPAE: Invalidate the TLB for module addresses during translation fault   Catalin Marinas
• [PATCH 5/5] ARM: Cortex-M3: Add support for exception handling   Catalin Marinas
• [PATCH 5/5] ARM: Cortex-M3: Add support for exception handling   Catalin Marinas
• [GIT PULL] ARM: Remove the __ARCH_WANT_INTERRUPTS_ON_CTXSW definition   Catalin Marinas
• [PATCH 1/7] Add various hugetlb arm high level hooks   Catalin Marinas
• [PATCH 1/7] Add various hugetlb arm high level hooks   Catalin Marinas
• [PATCH 1/7] Add various hugetlb arm high level hooks   Catalin Marinas
• [PATCH 1/7] Add various hugetlb arm high level hooks   Catalin Marinas
• [PATCH 1/7] Add various hugetlb arm high level hooks   Catalin Marinas
• [PATCH 1/7] Add various hugetlb arm high level hooks   Catalin Marinas
• [PATCH 1/7] Add various hugetlb arm high level hooks   Catalin Marinas
• [dmaengine] [Q] jiffies value does not increase in dma_sync_wait()   javier Martin
• [dmaengine] [Q] jiffies value does not increase in dma_sync_wait()   javier Martin
• [dmaengine] [Q] jiffies value does not increase in dma_sync_wait()   javier Martin
• [PATCH v3] dmaengine: Add support for MEMCPY for imx-dma.   javier Martin
• [PATCH 1/2] i.MX DMA: Add support for 2D transfers.   javier Martin
• [PATCH 0/4] dmaengine: i.MX DMA series.   javier Martin
• [PATCH 0/4] dmaengine: i.MX DMA series.   javier Martin
• [PATCH] ARM: head-nommu.S: use long distance encoding for branch instruction   Dave Martin
• [PATCH v3 2/2] ARM: vfp: clear fpscr length and stride bits on entry to sig handler   Dave Martin
• [PATCH 1/1] arm: vfp: Raising SIGFPE on invalid floating point operation   Dave Martin
• [PATCH 1/3] arm: ignore devicetree blobs.   Dave Martin
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Dave Martin
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Dave Martin
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Dave Martin
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Dave Martin
• [RFC PATCH 0/2] ARM: assembler: Add uniform assembler framework   Dave Martin
• [RFC PATCH 1/2] ARM: assembler: Add uniform assembler framework   Dave Martin
• [RFC PATCH 2/2] ARM: virt: Add assembler helpers for the Virtualization Extensions   Dave Martin
• [RFC PATCH 0/2] ARM: assembler: Add uniform assembler framework   Dave Martin
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Dave Martin
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Dave Martin
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Dave Martin
• [RFC PATCH 0/2] ARM: assembler: Add uniform assembler framework   Dave Martin
• [PATCH 1/2] i.MX DMA: Add support for 2D transfers.   Javier Martin
• [PATCH 2/2] dmaengine: i.MX: Add support for interleaved transfers.   Javier Martin
• [PATCH 0/4] dmaengine: i.MX DMA series.   Javier Martin
• [PATCH 1/4] dmaengine: Add support for MEMCPY for imx-dma.   Javier Martin
• [PATCH 2/4] i.MX DMA: Add support for 2D transfers.   Javier Martin
• [PATCH 3/4] dmaengine: i.MX: Add support for interleaved transfers.   Javier Martin
• [PATCH 4/4] dmaengine: Add support for multiple descriptors for imx-dma.   Javier Martin
• [PATCH] i.MX27: visstrim_m10: Add video support.   Javier Martin
• [PATCH] i.MX27: visstrim_m10: Add m41t00 RTC support.   Javier Martin
• [PATCH v2 0/2] dmaengine: i.MX DMA series.   Javier Martin
• [PATCH v2 1/2] dmaengine: Add support for MEMCPY for imx-dma.   Javier Martin
• [PATCH v2 2/2] dmaengine: Add support for multiple descriptors for imx-dma.   Javier Martin
• [PATCH 0/4] i.MX27: visstrim_m10: Add several peripherals.   Javier Martin
• [PATCH v2 1/4] i.MX27: visstrim_m10: Sort IMX_HAVE_PLATFORM_MXC_MMC properly.   Javier Martin
• [PATCH v2 2/4] i.MX27: visstrim_m10: Register I2C devices after I2C busses have been added.   Javier Martin
• [PATCH v2 3/4] i.MX27: visstrim_m10: Add m41t00 RTC support.   Javier Martin
• [PATCH v2 4/4] i.MX27: visstrim_m10: Add video support.   Javier Martin
• [PATCH] i.MX27: visstrim_m10: Add led support.   Javier Martin
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Peter Maydell
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Paul E. McKenney
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Paul E. McKenney
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Paul E. McKenney
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Paul E. McKenney
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Paul E. McKenney
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Paul E. McKenney
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Paul E. McKenney
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Paul E. McKenney
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Paul E. McKenney
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Paul E. McKenney
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Paul E. McKenney
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Paul E. McKenney
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Paul E. McKenney
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Paul E. McKenney
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Paul E. McKenney
• [PATCH][RFC] tracing/rcu: Add trace_##name##__rcuidle() static tracepoint for inside rcu_idle_exit() sections   Paul E. McKenney
• [PATCH][RFC] tracing/rcu: Add trace_##name##__rcuidle() static tracepoint for inside rcu_idle_exit() sections   Paul E. McKenney
• [PATCH 0/2] mxc_ehci: expand usb_hwinit options from boardfile   Mehnert, Torsten
• [PATCH 1/2] mxc_ehci.h: add flags for usb hwinit   Mehnert, Torsten
• [PATCH 2/2] ehci-imx25.c: use new flags from mxc_ehci.h in usb_hwinit   Mehnert, Torsten
• [PATCH RFC] OMAP: serial: Release the claimed memory region in remove   Menon, Nishanth
• [PATCH 6/6] arm: omap: pm-debug: enhanced usecount debug support   Menon, Nishanth
• [PATCH 6/6] arm: omap: pm-debug: enhanced usecount debug support   Menon, Nishanth
• [PATCHv9 3/5] arm: omap3: add common twl configurations for vdd1 and vdd2   Menon, Nishanth
• [PATCHv9 3/5] arm: omap3: add common twl configurations for vdd1 and vdd2   Menon, Nishanth
• [PATCHv5 02/14] arm: omap: voltage: renamed vp_vddmin and vp_vddmax fields   Menon, Nishanth
• [PATCHv5 06/14] arm: omap: add support for oscillator setup   Menon, Nishanth
• [PATCHv5 02/14] arm: omap: voltage: renamed vp_vddmin and vp_vddmax fields   Nishanth Menon
• [PATCHv5 03/14] arm: omap3+: voltage: parameter segregation   Menon, Nishanth
• [PATCHv5 03/14] arm: omap3+: voltage: parameter segregation   Menon, Nishanth
• [PATCH 04/14] ARM: OMAP3+: SmartReflex: Add a shutdown hook   Menon, Nishanth
• [PATCH 04/13] ARM: OMAP3+: SmartReflex: Add a shutdown hook   Nishanth Menon
• [PATCH] ARM: pl330: fix null pointer dereference in pl330_chan_ctrl()   Javi Merino
• [PATCH] ARM: pl330: fix null pointer dereference in pl330_chan_ctrl()   Javi Merino
• [PATCH] davinci_cpdma: Fix channel number written to teardown registers   David Miller
• [PATCH] davinci_mdio: Correct bitmask for clock divider value   David Miller
• [PATCH v2] davinci_emac: Do not free all rx dma descriptors during init   David Miller
• [PATCH v2] ARM: LPC32xx: Ethernet driver   David Miller
• [PATCH v2] ARM: LPC32xx: Ethernet driver   David Miller
• Reg pinmux driver for OMAP based SoC- AM335X   Mohammed, Afzal
• [PATCH 0/2] AM335X: SoC type detection & SRAM support   Afzal Mohammed
• [PATCH 1/2] arm:omap:am33xx: SoC type detection   Afzal Mohammed
• [PATCH 2/2] arm:omap: am33xx SRAM support (minimal)   Afzal Mohammed
• [PATCH v2 0/2] AM335X: SoC type detection & SRAM support   Afzal Mohammed
• [PATCH v2 1/2] ARM: OMAP2+: id: Add am33xx SoC type detection   Afzal Mohammed
• [PATCH v2 2/2] ARM: OMAP: sram: Add am33xx SRAM support (minimal)   Afzal Mohammed
• [GIT PULL] Versatile Express DT support   Pawel Moll
• [GIT PULL] Versatile Express DT support   Pawel Moll
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Ingo Molnar
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Ingo Molnar
• [PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM   Ingo Molnar
• [PATCH] iop-adma: Corrected array overflow in RAID6 Xscale(R) test.   Don Morris
• [PATCH 1/2] genalloc: add support of named pool   Andrew Morton
• [PATCH 1/2] genalloc: add support of named pool   Andrew Morton
• [PATCH v5 00/27] irq_domain generalization and rework   Andrew Morton
• [PATCHv22 14/16] X86: integrate CMA with DMA-mapping subsystem   Andrew Morton
• [PULL] ARM mach/irqs.h cleanup for 3.4   Paul Mundt
• [PATCH] arch/arm/mach-shmobile/board-ag5evm.c: included linux/dma-mapping.h twice   Paul Mundt
• [PATCH 2/2] misc: c2c: Add C2C(Chip to Chip) device driver for EXYNOS   Sylwester Nawrocki
• [PATCH 1/2] ARM: EXYNOS: Add files about definition of C2C   Sylwester Nawrocki
• [PATCH 1/2] ARM: EXYNOS: add support GPIO for EXYNOS5250   Sylwester Nawrocki
• [RFC PATCH 5/7] ARM: davinci: i2c: add OF support   Sylwester Nawrocki
• [PATCH v2 03/11] ARM: EXYNOS: add clock part for EXYNOS5250 SoC   Sylwester Nawrocki
• [PATCH v9 1/2] ARM: EXYNOS: Change System MMU platform device definitions   Sylwester Nawrocki
• [PATCH 0/6] mmc: omap_hsmmc: Clean up use/abuse of pdev->id   Rajendra Nayak
• [PATCH 1/2] ARM: OMAP: Get rid of reset for system timer   Rajendra Nayak
• [PATCH 0/6] mmc: omap_hsmmc: Clean up use/abuse of pdev->id   Rajendra Nayak
• [PATCH 2/3] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins   Rajendra Nayak
• [PATCH 2/3] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins   Rajendra Nayak
• [PATCH 0/3] omap hsmmc init cleanup and section warning fixes for v3.4 merge window   Nayak, Rajendra
• [PATCH 0/3] omap hsmmc init cleanup and section warning fixes for v3.4 merge window   Rajendra Nayak
• [PATCH 0/3] omap hsmmc init cleanup and section warning fixes for v3.4 merge window   Rajendra Nayak
• [PATCH 2/3] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins   Rajendra Nayak
• [PATCH 0/3] omap hsmmc init cleanup and section warning fixes for v3.4 merge window   Rajendra Nayak
• [PATCH 0/3] omap hsmmc init cleanup and section warning fixes for v3.4 merge window   Rajendra Nayak
• [PATCH 0/3] omap hsmmc init cleanup and section warning fixes for v3.4 merge window   Rajendra Nayak
• [PATCH 0/3] omap hsmmc init cleanup and section warning fixes for v3.4 merge window   Rajendra Nayak
• [PATCH 0/3] omap hsmmc init cleanup and section warning fixes for v3.4 merge window   Rajendra Nayak
• [PATCH 0/3] omap hsmmc init cleanup and section warning fixes for v3.4 merge window   Rajendra Nayak
• [PATCH 0/3] omap hsmmc init cleanup and section warning fixes for v3.4 merge window   Rajendra Nayak
• [PATCH v2 6/6] mmc: omap_hsmmc: Don't expect MMC1 to always have vmmc supply   Rajendra Nayak
• [PATCH v2 0/6] mmc: omap_hsmmc: Clean up use/abuse of pdev->id   Rajendra Nayak
• [PATCH v2 1/6] mmc: omap_hsmmc: use platform_get_resource_byname for tx/rx DMA channels   Rajendra Nayak
• [PATCH v2 2/6] mmc: omap_hsmmc: remove unused .set_sleep function   Rajendra Nayak
• [PATCH v2 3/6] mmc: omap_hsmmc: Use OMAP_HSMMC_SUPPORTS_DUAL_VOLT flag to remove host->id based hardcoding   Rajendra Nayak
• [PATCH v2 4/6] mmc: omap_hsmmc: Get rid of omap_hsmmc_1_set_power function   Rajendra Nayak
• [PATCH v2 5/6] mmc: omap_hsmmc: Get rid of omap_hsmmc_4_set_power function   Rajendra Nayak
• [PATCH v2 6/6] mmc: omap_hsmmc: Don't expect MMC1 to always have vmmc supply   Rajendra Nayak
• [PATCH] mmc: omap_hsmmc: convert all pr_* to dev_*   Rajendra Nayak
• [PATCH v3 0/2] Device tree support for TWL regulators   Rajendra Nayak
• [PATCH v3 1/2] regulator: twl: adapt twl-regulator driver to dt   Rajendra Nayak
• [PATCH v3 2/2] arm/dts: twl: Pass regulator data from dt   Rajendra Nayak
• [PATCH v2 0/7] omap hsmmc init cleanup and section warning fixes for v3.4 merge window   Rajendra Nayak
• [PATCH v2 1/7] ARM: OMAP: omap_device: Expose omap_device_{alloc, delete, register}   Rajendra Nayak
• [PATCH v2 2/7] ARM: OMAP: omap_device: Add omap_device_unregister()   Rajendra Nayak
• [PATCH v2 3/7] mmc: omap_hsmmc: Make the driver support hotpluggable devices   Rajendra Nayak
• [PATCH v2 4/7] mmc: omap_hsmmc: If probe fails, give our error messages   Rajendra Nayak
• [PATCH v2 5/7] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins   Rajendra Nayak
• [PATCH v2 6/7] ARM: OMAP3: Use .teardown of twl4030-gpio to clean board requests   Rajendra Nayak
• [PATCH v2 7/7] ARM: OMAP2+: Mark omap_hsmmc_init and omap_mux related functions as __init   Rajendra Nayak
• [PATCH v2 0/4] omap hsmmc device tree support   Rajendra Nayak
• [PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree   Rajendra Nayak
• [PATCH v2 2/4] mmc: omap_hsmmc: Avoid a regulator voltage change with dt   Rajendra Nayak
• [PATCH v2 3/4] arm/dts: OMAP4: Add mmc controller nodes and board data   Rajendra Nayak
• [PATCH v2 4/4] arm/dts: OMAP3: Add mmc controller nodes and board data   Rajendra Nayak
• [PATCH v2 0/4] omap hsmmc device tree support   Rajendra Nayak
• [PATCH v2 5/7] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins   Rajendra Nayak
• [PATCH v2 6/7] ARM: OMAP3: Use .teardown of twl4030-gpio to clean board requests   Rajendra Nayak
• [PATCH v3 1/2] regulator: twl: adapt twl-regulator driver to dt   Rajendra Nayak
• [PATCH v2 4/4] arm/dts: OMAP3: Add mmc controller nodes and board data   Rajendra Nayak
• [PATCH v2 5/7] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins   Rajendra Nayak
• [PATCH v2 0/7] omap hsmmc init cleanup and section warning fixes for v3.4 merge window   Rajendra Nayak
• [PATCH 2/6] ARM: OMAP4 PM: Add IO Daisychain support   Rajendra Nayak
• [PATCH 2/6] ARM: OMAP4 PM: Add IO Daisychain support   Rajendra Nayak
• [PATCH 0/6] Fix issues around twl4030-gpio used as a module   Rajendra Nayak
• [PATCH 1/6] ARM: OMAP: omap_device: Add omap_device_unregister()   Rajendra Nayak
• [PATCH 2/6] mmc: omap_hsmmc: Make the driver support hotpluggable devices   Rajendra Nayak
• [PATCH 3/6] mmc: omap_hsmmc: If probe fails, give out error messages   Rajendra Nayak
• [PATCH 4/6] ARM: OMAP3: Mark only those mmc devices which use gpio_cd, as deferred   Rajendra Nayak
• [PATCH 5/6] ARM: OMAP3: Modify omap_hsmmc_late_init to handle deleting mmc devices   Rajendra Nayak
• [PATCH 6/6] ARM: OMAP3: Use .teardown of twl4030-gpio to clean board requests   Rajendra Nayak
• [PATCH v2 0/6] mmc: omap_hsmmc: Clean up use/abuse of pdev->id   Rajendra Nayak
• [PATCH v2 3/4] arm/dts: OMAP4: Add mmc controller nodes and board data   Rajendra Nayak
• [PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree   Rajendra Nayak
• [PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree   Rajendra Nayak
• [PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree   Rajendra Nayak
• [PATCH 4/6] ARM: OMAP3: Mark only those mmc devices which use gpio_cd, as deferred   Rajendra Nayak
• [PATCH 5/6] ARM: OMAP3: Modify omap_hsmmc_late_init to handle deleting mmc devices   Rajendra Nayak
• [PATCH v3 0/2] Device tree support for TWL regulators   Rajendra Nayak
• [PATCH v3 1/2] regulator: twl: adapt twl-regulator driver to dt   Rajendra Nayak
• [PATCH v3 2/2] arm/dts: twl: Pass regulator data from dt   Rajendra Nayak
• [PATCH v3 0/2] Device tree support for TWL regulators   Rajendra Nayak
• [PATCH 5/6] ARM: OMAP4: suspend: Do not get dsp/tesla out of reset   Rajendra Nayak
• [PATCH v3 0/2] Device tree support for TWL regulators   Rajendra Nayak
• [PATCH] ARM: OMAP2+: Remove apply_uV constraints for fixed regulator   Rajendra Nayak
• [PATCH 0/4] twl-regulator DT adaptation and updates to add new regulators   Rajendra Nayak
• [PATCH 1/4] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators   Rajendra Nayak
• [PATCH 2/4] regulator: twl: adapt twl-regulator driver to dt   Rajendra Nayak
• [PATCH 3/4] regulator: twl-regulator: Add fixed LDO for V1V8, V2V1 supply   Rajendra Nayak
• [PATCH 4/4] MFD: twl-core: regulator configuration for twl6030 V1V8, V2V1 SMPS   Rajendra Nayak
• [PATCH 02/15] mm: page_alloc: update migrate type of pages on pcp when isolating   Michal Nazarewicz
• [PATCH 08/15] mm: mmzone: MIGRATE_CMA migration type added   Michal Nazarewicz
• [PATCH 12/15] drivers: add Contiguous Memory Allocator   Michal Nazarewicz
• [PATCH 05/15] mm: compaction: export some of the functions   Michal Nazarewicz
• [PATCH 08/15] mm: mmzone: MIGRATE_CMA migration type added   Michal Nazarewicz
• [Linaro-mm-sig] [PATCH 11/15] mm: trigger page reclaim in alloc_contig_range() to stabilize watermarks   Michal Nazarewicz
• [Linaro-mm-sig] [PATCHv21 12/16] mm: trigger page reclaim in alloc_contig_range() to stabilise watermarks   Michal Nazarewicz
• [Linaro-mm-sig] [PATCHv21 12/16] mm: trigger page reclaim in alloc_contig_range() to stabilise watermarks   Michal Nazarewicz
• [Linaro-mm-sig] [PATCHv23 00/16] Contiguous Memory Allocator   Michal Nazarewicz
• [Linaro-mm-sig] [PATCHv23 00/16] Contiguous Memory Allocator   Michal Nazarewicz
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   NeilBrown
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   NeilBrown
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   NeilBrown
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   NeilBrown
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   NeilBrown
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   NeilBrown
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   NeilBrown
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   NeilBrown
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   NeilBrown
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   NeilBrown
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   NeilBrown
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   NeilBrown
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   NeilBrown
• [PATCH 0/2] Two trivial omap/serial patches   NeilBrown
• [PATCH 2/2] ARM: OMAP2: remove some orphan function declarations.   NeilBrown
• [PATCH 1/2] ARM: OMAP2+: UART: remove unused fields in omap_uart_state.   NeilBrown
• Possible circular locking dependency (3.3-rc2)   NeilBrown
• [PATCH 0/2] Two trivial omap/serial patches   NeilBrown
• [Linaro-mm-sig] [PATCHv21 12/16] mm: trigger page reclaim in alloc_contig_range() to stabilise watermarks   Robert Nelson
• [Linaro-mm-sig] [PATCHv21 12/16] mm: trigger page reclaim in alloc_contig_range() to stabilise watermarks   Robert Nelson
• [Linaro-mm-sig] [PATCHv21 12/16] mm: trigger page reclaim in alloc_contig_range() to stabilise watermarks   Robert Nelson
• [PATCH v3 21/25] irqdomain/powerpc: Replace custom xlate functions with library functions   Michael Neuling
• [regression] Re: Enabling runtime P2V by default   Jonathan Nieder
• [regression] Re: Enabling runtime P2V by default   Jonathan Nieder
• [RFC 00/11]O MAP/ASoC: Move and merge McBSP driver under ASoC   Jarkko Nikula
• [PATCH v3] ARM: davinci: map default_queue to edma channels   Nori, Sekhar
• [PATCH v7 2/8] ARM: davinci: create new common platform header for davinci   Nori, Sekhar
• [PATCH v7 3/8] davinci: eliminate use of IO_ADDRESS() on sysmod   Nori, Sekhar
• [PATCH v7 4/8] davinci: dm644x: Replace register base value with a defined macro   Nori, Sekhar
• [PATCH v7 5/8] davinci: dm644x: change vpfe capture structure variables for consistency   Nori, Sekhar
• [PATCH v7 6/8] davinci: dm644x: move vpfe init from soc to board specific files   Nori, Sekhar
• [PATCH v7 7/8] davinci: dm644x: add support for v4l2 video display   Nori, Sekhar
• [PATCH v4 0/3] Moving EMIF driver to MFD framework   Nori, Sekhar
• [GIT PULL] DaVinci cleanups for v3.4   Nori, Sekhar
• [GIT PULL] DaVinci fix for v3.4   Nori, Sekhar
• [GIT PULL] DaVinci cleanups for v3.4   Nori, Sekhar
• [GIT PULL] DaVinci cleanups for v3.4   Nori, Sekhar
• [PATCH] mtd: fix the wrong check condition   Brian Norris
• [PATCH] mtd: fix the wrong check condition   Brian Norris
• [PATCH] mtd: fix the wrong check condition   Brian Norris
• [PATCH] mtd : change the location of the ONFI detected log   Brian Norris
• [PATCH] ARM: boot/compressed/decompress.c cleanup   Michael Opdenacker
• [PATCH] ARM: boot/compressed/decompress.c cleanup   Michael Opdenacker
• [PATCH] ARM: boot/compressed/decompress.c cleanup   Michael Opdenacker
• ARM: add xz kernel compression support   Michael Opdenacker
• [PATCH 1/2] ARM: remove memmove from boot/compressed/string.c   Michael Opdenacker
• [PATCH 2/2] ARM: add support for xz kernel decompression   Michael Opdenacker
• [PATCH 1/2] ARM: remove memmove from boot/compressed/string.c   Michael Opdenacker
• ARM: add xz kernel compression support   Michael Opdenacker
• ARM: add xz kernel compression support   Michael Opdenacker
• [PATCH] efikamx: match machine descriptions with legacy   Hector Oron
• [PATCH] efikamx: match machine descriptions with legacy   Hector Oron
• mc13xxx: add I2C support   Samuel Ortiz
• [PATCH v3 0/3] MFD: twl6040: Conversion to i2c driver   Samuel Ortiz
• [PATCH v2 7/7] MFD: TWL6040: Add regulator support for VIO, V2V1 supplies   Samuel Ortiz
• [PATCH v3 0/3] MFD: twl6040: Conversion to i2c driver   Samuel Ortiz
• [PATCH v4 1/2] mfd: Add anatop mfd driver   Samuel Ortiz
• [PATCH 3/7] MFD: twl-core: regulator configuration for twl6030 V1V8, V2V1 SMPS   Samuel Ortiz
• [SPI/MFD] Fix build/section mismatch warnings in da9052-spi.c   Samuel Ortiz
• [V1 1/3] mfd: add power control interface for pm8606 chip   Samuel Ortiz
• [PATCH v5 2/3] arm:davinci: move emif driver to mfd framework   Samuel Ortiz
• [V2 3/4] mfd: Add ability to wake the system for 88pm860x   Samuel Ortiz
• [V3 1/3] mfd: add power control interface for pm8606 chip   Samuel Ortiz
• [PATCH] of_gpio: add support of of_gpio_named_count to be able to count named gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] i2c/gpio-i2c add: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] ARM: at91s: sam9g20 add i2c DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] ARM: at91: usb_a9g20 add DT i2c support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] ARM: at91: sam9g45 add i2c DT support   Jean-Christophe PLAGNIOL-VILLARD
• [FOR 3.3 PATCH 1/2] ARM: at91: add accessor to manage smc   Jean-Christophe PLAGNIOL-VILLARD
• [FOR 3.3 PATCH 2/2] pata/at91: use newly introduce smc accessor   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] genalloc: add support of named pool   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] ARM: at91: make gpbr soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] ARM: at91: factorise duplicated at91sam9 idle   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] ARM: at91: usb_a9g20/dt: add leds support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] ARM: at91: at91sam9m10g45ek/dt: add leds support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] ARM: at91: at91sam9m10g45ek/dt: add gpio-keys support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] ARM: at91: usb_a9g20/dt: add gpio-keys support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] ARM: at91: board/dt drop default console   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/6 V2] of/mtd/nand: add generic bindings and helpers   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6 V2] atmel/nand: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] ARM: at91/dt: add Calao DAB-MMX daugther board support for USB-A9G20   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] genalloc: add support of named pool   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] i2c/gpio-i2c add: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] i2c/gpio-i2c add: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] of: introduce helper to manage boolean   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/6 V2] of/mtd/nand: add generic bindings and helpers   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/6 V2] of/mtd/nand: add generic bindings and helpers   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6 V2] atmel/nand: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] of: introduce helper to manage boolean   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/6 v3] of/mtd/nand: add generic bindings and helpers   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] mmc: atmel-mci: save and restore sdioirq when soft reset is performed   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] mmc: atmel-mci: save and restore sdioirq when soft reset is performed   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3] SPI: add CSR SiRFprimaII SPI controller driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4 v2] i2c/gpio: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4 v2] ARM: at91: sam9g20 add i2c DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] ARM: at91: usb_a9g20 add DT i2c support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4 v2] ARM: at91: sam9g45 add i2c DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] spi: move master of_node init to spi_alloc_master   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] of_spi: add generic binding support to specify ncs gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] spi/atmel: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V3] MTD: atmel_nand: Update driver to support Programmable HW ECC controller   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] MTD: atmel_nand: Update driver to support Programmable HW ECC controller   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] gpio: drop CONFIG_OF_GPIO in the definition of the struct gpio_chip   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] gpio: drop CONFIG_OF_GPIO in the definition of the struct gpio_chip   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] gpio: drop CONFIG_OF_GPIO in the definition of the struct gpio_chip   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] AT91: Remove fixed mapping for AT91RM9200 ethernet   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/6] ARM: at91: more at91_sys_read/write cleanup   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/6] ARM: at91: pm_slowclock rename register to named define   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/6] ARM: at91: pm_slowclock move register definition to pm.c   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/6] ARM: at91: rm9200 move sdramc define to at91rm9200_sdramc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/6] ARM: at91: make sdram/ddr register base soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6] ARM: at91: pm_slowclock add runtime memory contoller detection   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/6] ARM: at91: make pmc register base soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4 v2] i2c/gpio: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] of_spi: add generic binding support to specify ncs gpio   Jean-Christophe PLAGNIOL-VILLARD
• How to deal with a PHY configuration related to the board?   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] ARM: at91: usb ohci add dt support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] ARM: at91: dt: enable usb ohci for 9g20 and 9g45   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] ARM: at91: usb ehci add dt support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] ARM: at91: dt: enable usb ehci for 9g45   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4 v2] ARM: at91: usb ohci add dt support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] ARM: at91: pm select memory controler at runtime   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] ARM: at91: at91_rtc: provide select the RTT so use at soc level   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] ARM: at91: at91_rtc: pass the GPBR to use via ressources   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/15] ARM: at91: clean-up mach/io.h   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/15] ARM: at91: clean-up mach/io.h   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] ARM: remove memmove from boot/compressed/string.c   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3] of/mtd/nand: add generic bindings and helpers   Jean-Christophe PLAGNIOL-VILLARD
• [PULL] of nand generic binding   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 16/18] Atmel: move console default platform_device to serial driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 13/18] ARM: at91/rtc-at91sam9: pass the GPBR to use via ressources   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/18] ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/18] ARM: at91: make ST (System Timer) soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/18] ARM: at91: make ST (System Timer) soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/18] ARM: at91: make ST (System Timer) soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/18] ARM: at91: make ST (System Timer) soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 13/18] ARM: at91/rtc-at91sam9: pass the GPBR to use via ressources   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/18] ARM: at91: make ST (System Timer) soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] of_spi: add generic binding support to specify ncs gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4 v2] i2c/gpio: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4 v2] i2c/gpio: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4 v2] i2c/gpio: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4 v2] i2c/gpio: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4 v2] i2c/gpio: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4 v2] i2c/gpio: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4 v2] i2c/gpio: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4 v2] i2c/gpio: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4 v2] i2c/gpio: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4 v2] i2c/gpio: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6 V2] atmel/nand: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6 V2] atmel/nand: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6 V3] atmel/nand: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6 V3] atmel/nand: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/7] share sa1100 rtc driver to arch-mmp   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 07/19] ARM: at91/pm_slowclock: function slow_clock() accepts parameters   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 19/19] ARM: at91/board-dt: move at91_initialize() to init_irq()   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 07/19] ARM: at91/pm_slowclock: function slow_clock() accepts parameters   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 12/19] ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 02/19] ARM: at91/at91x40: remove use of at91_sys_read/write   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 12/19] ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 06/19] ARM: at91/pm_slowclock: rename register to named define   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 12/19] ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 02/19] ARM: at91/at91x40: remove use of at91_sys_read/write   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 03/19] ARM: at91: make matrix register base soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 16/19] ARM: at91: merge SRAM Memory banks thanks to mirroring   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 02/19] ARM: at91/at91x40: remove use of at91_sys_read/write   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 17/21] ARM: at91: merge SRAM Memory banks thanks to mirroring   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: integrator: convert to sparse irqs   Jean-Christophe PLAGNIOL-VILLARD
• AT91: How copy kernel code to SRAM and execute?   Jean-Christophe PLAGNIOL-VILLARD
• AT91: How copy kernel code to SRAM and execute?   Jean-Christophe PLAGNIOL-VILLARD
• AT91: How copy kernel code to SRAM and execute?   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/15] ARM: at91: clean-up mach/io.h   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] ARM: at91: at91sam9x5cm/dt: add leds support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5 v2] i2c/gpio: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5 v2] ARM: at91: sam9g20 add i2c DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5 v2] ARM: at91: usb_a9g20 add DT i2c support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5 v2] ARM: at91: sam9g45 add i2c DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5 v2] ARM: at91: sam9x5 add i2c DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PULL] of nand generic binding   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM   Venki Pallipadi
• [PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM   Venki Pallipadi
• [PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM   Venki Pallipadi
• [PATCH] ARM: ptrace: Include linux/audit.h to fix build errors   Eric Paris
• [PATCH] ARM: ptrace: Include linux/audit.h to fix build errors   Eric Paris
• [PATCH] ARM: ptrace: Include linux/audit.h to fix build errors   Eric Paris
• [PATCH - linux-next] ARM: ptrace: Fix audit caused compile error   Eric Paris
• [PATCH] ARM/audit: use correct arch on audit_syscall_enter   Eric Paris
• [PATCH - linux-next] ARM: ptrace: Fix audit caused compile error   Eric Paris
• [PATCH] ARM/audit: use correct arch on audit_syscall_enter   Eric Paris
• [PATCH -v2] ARM/audit: include audit header and fix audit arch   Eric Paris
• [PATCH 8/9] ARM: EXYNOS: temporary add map definitions for uart   Kyungmin Park
• [PATCH 9/9] ARM: EXYNOS: temporary fixup regarding get_core_count()   Kyungmin Park
• [PATCH 1/2] ARM: EXYNOS: Add files about definition of C2C   Kyungmin Park
• [PATCH] drivers/media/video/s5p-tv/*_drv.c: use devm_ functions   Kyungmin Park
• [PATCH] ARM: EXYNOS: Adds Samsung TRATS board support   Kyungmin Park
• [PATCH v2 08/11] ARM: EXYNOS: add support for ARCH_EXYNOS5 and EXYNOS5250   Kyungmin Park
• Subject: [PATCH] MAINTAINERS: add maintainer entry for SAMSUNG EXYNOS DeviceTree   Kyungmin Park
• [PATCH v9 0/2] iommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   Kyungmin Park
• [PATCH v9 1/2] ARM: EXYNOS: Change System MMU platform device definitions   Kyungmin Park
• [PATCH v9 2/2] iommu/exynos: Add iommu driver for Exynos Platforms   Kyungmin Park
• reboot/suspend regression: hx4700 freezes under linux-3.3-rc1   Paul Parsons
• [PATCH v4 1/2] pxa/hx4700: Add PCMCIA/CF support   Paul Parsons
• [PATCH v4 2/2] pxa/hx4700: Add PCMCIA/CF support   Paul Parsons
• [PATCH v4 1/2] pxa/hx4700: Add PCMCIA/CF support   Paul Parsons
• [PATCH v5 1/2] pxa/hx4700: Add PCMCIA/CF support   Paul Parsons
• [PATCH] pxa/hx4700: Correct StrataFlash block size discovery   Paul Parsons
• [PATCH v2] pxa/hx4700: Correct StrataFlash block size discovery   Paul Parsons
• [PATCH v3 REPOST] pxa/hx4700: Fix PXA_GPIO_IRQ_BASE/IRQ_NUM values   Paul Parsons
• [PATCH] pxa/hx4700: Fix basic suspend/resume   Paul Parsons
• [PATCH] pxa/hx4700: Fix basic suspend/resume   Paul Parsons
• [PATCH] pxa/hx4700: Avoid unbalanced irq wakeup enables/disables   Paul Parsons
• [PATCH 02/11] Revert "ARM: pxa: add dummy clock for sa1100-rtc"   Paul Parsons
• Linux 3.3-rc5 and pxa-gpio possible regression   Paul Parsons
• ARM: add xz kernel compression support   Veli-Pekka Peltola
• [PATCH v2] ARM: LPC32xx: Ethernet driver   Joe Perches
• [PATCH v3] lpc32xx: Added ethernet driver   Joe Perches
• [PATCH trivial next 0/9] treewide: Use vsprintf extention %pf   Joe Perches
• [PATCH trivial next 3/9] arm: Use vsprintf extention %pf with builtin_return_address   Joe Perches
• Want to Get Suggestion for MX28 USB Submisson   Chen Peter-B29397
• Want to Get Suggestion for MX28 USB Submisson   Chen Peter-B29397
• [PATCH 1/1] arm: vfp: Raising SIGFPE on invalid floating point operation   Mikael Pettersson
• [PATCH 1/1] arm: vfp: Raising SIGFPE on invalid floating point operation   Mikael Pettersson
• [PATCH 1/1] arm: vfp: Raising SIGFPE on invalid floating point operation   Mikael Pettersson
• [PATCH 1/2] ARM: ixp4xx: fix compilation, add gpiolib support   Mikael Pettersson
• [alsa-devel] [PATCH 4/4] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Trent Piepho
• [linux-pm] [PATCH 0/3] coupled cpuidle state support   Lorenzo Pieralisi
• [linux-pm] [PATCH 0/3] coupled cpuidle state support   Lorenzo Pieralisi
• [PATCH] ARM: perf: add PMU hotplug notifiery   Lorenzo Pieralisi
• [PATCH] ARM: OMAP3+: PM debug: fix the use of debugfs_create_* API   Jean Pihet
• [PATCH] ARM: OMAP2+: PM debug: fix the use of debugfs_create_* API   Jean Pihet
• [PATCH v3 00/20] ARM: OMAP3+: SmartReflex: bugfixes   Jean Pihet
• [PATCH 01/20] ARM: OMAP3+: SmartReflex: Layer Cleanup [V4]   Jean Pihet
• [PATCH 02/20] ARM: OMAP3+: SmartReflex: add missing error-handling code   Jean Pihet
• [PATCH 03/20] ARM: OMAP3+: SmartReflex: fix err interrupt disable sequence   Jean Pihet
• [PATCH 04/20] ARM: OMAP3+: SmartReflex Class3: disable errorgen before disable VP   Jean Pihet
• [PATCH 05/20] ARM: OMAP3+: SmartReflex: Add a shutdown hook   Jean Pihet
• [PATCH 06/20] ARM: OMAP3+: SmartReflex: Fix status masking in ERRCONFIG register   Jean Pihet
• [PATCH 07/20] ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a need   Jean Pihet
• [PATCH 08/20] ARM: OMAP3+: hwmod: add SmartReflex IRQs   Jean Pihet
• [PATCH 09/20] ARM: OMAP3+: SmartReflex: introduce class init, deinit and priv data   Jean Pihet
• [PATCH 10/20] ARM: OMAP3+: SmartReflex: introduce notifiers flags   Jean Pihet
• [PATCH 11/20] ARM: OMAP3+: SmartReflex: introduce notifier_control   Jean Pihet
• [PATCH 12/20] ARM: OMAP3+: SmartReflex: disable spamming interrupts   Jean Pihet
• [PATCH 13/20] ARM: OMAP3+: SmartReflex: introduce class private data per voltage domain   Jean Pihet
• [PATCH 14/20] ARM: OMAP3+: SmartReflex Class3: restrict CPU to run on   Jean Pihet
• [PATCH 15/20] ARM: OMAP3+: SmartReflex: add missing platform_set_drvdata()   Jean Pihet
• [PATCH 16/20] ARM: OMAP3+: SmartReflex: move late_initcall() closer to its argument   Jean Pihet
• [PATCH 17/20] ARM: OMAP3+: SmartReflex: misc cleanups   Jean Pihet
• [PATCH 18/20] ARM: OMAP3+: SmartReflex: micro-optimization for sanity check   Jean Pihet
• [PATCH 19/20] ARM: OMAP3+: SmartReflex: fix the use of debugfs_create_* API   Jean Pihet
• [PATCH 20/20] ARM: OMAP3+: SmartReflex: fix error handling   Jean Pihet
• [PATCH v2 00/19] ARM: OMAP3+: SmartReflex: bugfixes   Jean Pihet
• [RFC PATCH v4 2/4] ARM: omap: Remove cpuidle timekeeping and irq enable/disable   Jean Pihet
• [PATCH v4 00/14] ARM: OMAP3+: SmartReflex: bugfixes and clean-ups   Jean Pihet
• [PATCH 01/14] ARM: OMAP3+: SmartReflex: Layer Cleanup [V4]   Jean Pihet
• [PATCH 02/14] ARM: OMAP3+: SmartReflex: fix err interrupt disable sequence   Jean Pihet
• [PATCH 03/14] ARM: OMAP3+: SmartReflex Class3: disable errorgen before disable VP   Jean Pihet
• [PATCH 04/14] ARM: OMAP3+: SmartReflex: Add a shutdown hook   Jean Pihet
• [PATCH 05/14] ARM: OMAP3+: SmartReflex: use __devexit_p annotation   Jean Pihet
• [PATCH 06/14] ARM: OMAP3+: SmartReflex: Fix status masking in ERRCONFIG register   Jean Pihet
• [PATCH 07/14] ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a need   Jean Pihet
• [PATCH 08/14] ARM: OMAP3+: hwmod: add SmartReflex IRQs   Jean Pihet
• [PATCH 09/14] ARM: OMAP3+: SmartReflex: add missing platform_set_drvdata()   Jean Pihet
• [PATCH 10/14] ARM: OMAP3+: SmartReflex: move late_initcall() closer to its argument   Jean Pihet
• [PATCH 11/14] ARM: OMAP3+: SmartReflex: misc cleanups   Jean Pihet
• [PATCH 12/14] ARM: OMAP3+: SmartReflex: micro-optimization for sanity check   Jean Pihet
• [PATCH 13/14] ARM: OMAP3+: SmartReflex: fix the use of debugfs_create_* API   Jean Pihet
• [PATCH 14/14] ARM: OMAP3+: SmartReflex: fix error handling   Jean Pihet
• [PATCH v3 00/20] ARM: OMAP3+: SmartReflex: bugfixes   Jean Pihet
• [PATCH v2] ARM: OMAP: clock: cleanup CPUfreq leftovers   Jean Pihet
• [PATCHv2 0/8] arm: omap: clk/clkdm/pwrdm/voltdm usecounting changes   Jean Pihet
• [PATCH v5 1/9] cpuidle: Add commonly used functionality for consolidation   Jean Pihet
• [PATCH v5 3/9] ARM: omap: Consolidate OMAP3 cpuidle time keeping and irq enable   Jean Pihet
• [PATCH v6 1/9] cpuidle: Add common time keeping and irq enabling   Jean Pihet
• [PATCH v6 5/9] ARM: davinci: Consolidate time keeping and irq enable   Jean Pihet
• [PATCH v6 0/9] Consolidate cpuidle functionality   Jean Pihet
• [PATCH v5 00/13] ARM: OMAP3+: SmartReflex: bugfixes and clean-ups   Jean Pihet
• [PATCH 01/13] ARM: OMAP3+: SmartReflex: use voltage domain name in device attributes   Jean Pihet
• [PATCH 02/13] ARM: OMAP3+: SmartReflex: fix err interrupt disable sequence   Jean Pihet
• [PATCH 03/13] ARM: OMAP3+: SmartReflex Class3: disable errorgen before disable VP   Jean Pihet
• [PATCH 04/13] ARM: OMAP3+: SmartReflex: Add a shutdown hook   Jean Pihet
• [PATCH 05/13] ARM: OMAP3+: SmartReflex: Fix status masking in ERRCONFIG register   Jean Pihet
• [PATCH 06/13] ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a need   Jean Pihet
• [PATCH 07/13] ARM: OMAP3+: hwmod: add SmartReflex IRQs   Jean Pihet
• [PATCH 08/13] ARM: OMAP3+: SmartReflex: add missing platform_set_drvdata()   Jean Pihet
• [PATCH 09/13] ARM: OMAP3+: SmartReflex: move late_initcall() closer to its argument   Jean Pihet
• [PATCH 10/13] ARM: OMAP3+: SmartReflex: misc cleanups   Jean Pihet
• [PATCH 11/13] ARM: OMAP3+: SmartReflex: micro-optimization for sanity check   Jean Pihet
• [PATCH 12/13] ARM: OMAP3+: SmartReflex: fix the use of debugfs_create_* API   Jean Pihet
• [PATCH 13/13] ARM: OMAP3+: SmartReflex: fix error handling   Jean Pihet
• [PATCH 04/13] ARM: OMAP3+: SmartReflex: Add a shutdown hook   Jean Pihet
• [PATCH 04/14] ARM: OMAP3+: SmartReflex: Add a shutdown hook   Jean Pihet
• [PATCH] ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp   Laurent Pinchart
• [PATCH] ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp   Laurent Pinchart
• [PATCH 0/2] Errata workaround updates   Nicolas Pitre
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Nicolas Pitre
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Nicolas Pitre
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Nicolas Pitre
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Nicolas Pitre
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Nicolas Pitre
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Nicolas Pitre
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Nicolas Pitre
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Nicolas Pitre
• [PATCH 00/17] SA11x0 cleanups (mainly assabet/neponset)   Nicolas Pitre
• [PATCH] [ARM][Orion] Fix Orion5x GPIO regression from MPP cleanup   Nicolas Pitre
• [PATCHv2] [ARM][Orion] Fix Orion5x GPIO regression   Nicolas Pitre
• [PATCH] arm:orion: Fix USB phy for orion5x.   Nicolas Pitre
• [PATCH 1/3] ARM: make arch_ret_to_user macro optional   Nicolas Pitre
• [PATCH 2/3] ARM: make disable_fiq macro optional   Nicolas Pitre
• [PATCH 3/3] ARM: remove empty disable_fiq and arch_ret_to_user macros   Nicolas Pitre
• [regression] Re: Enabling runtime P2V by default   Nicolas Pitre
• [PATCH 2/3] ARM: make disable_fiq macro optional   Nicolas Pitre
• [PATCH 2/3] ARM: make disable_fiq macro optional   Nicolas Pitre
• [PATCH 2/3] ARM: make disable_fiq macro optional   Nicolas Pitre
• [PATCH v2] arm:orion: Fix USB phy for orion5x.   Nicolas Pitre
• [PATCHv3] [ARM][Orion] Fix Orion5x GPIO regression from MPP cleanup   Nicolas Pitre
• [PATCH v6 01/15] ARM: SoC: Introduce per SoC descriptor   Nicolas Pitre
• [PATCH v6 02/15] ARM: SoC: Add per SoC SMP and CPU hotplug operations   Nicolas Pitre
• [PATCH v6 13/15] ARM: hotplug: Introduce dummy_cpu_kill   Nicolas Pitre
• [PATCH v6 14/15] ARM: hotplug: Introduce dummy_cpu_disable   Nicolas Pitre
• [PATCH v6 15/15] ARM: hotplug: add cpu_lowpower as an alternative to cpu_die   Nicolas Pitre
• [PATCH v2 1/4] ARM: make arch_ret_to_user macro optional   Nicolas Pitre
• [PATCH v2 3/4] ARM: make entry-macro.S depend on !MULTI_IRQ_HANDLER   Nicolas Pitre
• [PATCH v2 2/4] ARM: rpc: make default fiq handler run-time installed   Nicolas Pitre
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Nicolas Pitre
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Nicolas Pitre
• [PATCH v3] ARM: rpc: make default fiq handler run-time installed   Nicolas Pitre
• [PATCH 00/15] mach/io.h cleanup and removal   Nicolas Pitre
• Cache problems in user space - kernel space communication   Nicolas Pitre
• [PATCH 13/15] ARM: make mach/io.h include optional   Nicolas Pitre
• [PATCH] ARM: ptrace: Include linux/audit.h to fix build errors   Nicolas Pitre
• [PATCH 1/2] ARM: remove memmove from boot/compressed/string.c   Nicolas Pitre
• ftp.arm.linux.org.uk now using dumb http git protocol   Nicolas Pitre
• Question: how to make one page readonly on ARM   Nicolas Pitre
• [PATCH] ARM: debug: add support for early console output via semihosting   Nicolas Pitre
• [PATCH 2/3 v4] arm: kirkwood: add dreamplug (fdt) support.   Nicolas Pitre
• [PATCH] omap: board-omap3evm: add required smsc911x regulators   Matt Porter
• [PATCH 0/2] omap: fix omap2plus defaults for am35xx parts   Matt Porter
• [PATCH 1/2] omap: enable davinci_emac in omap2plus_defconfig for   Matt Porter
• [PATCH 2/2] omap: build am3517crane board support by default   Matt Porter
• [PATCH] omap: board-omap3evm: add required smsc911x regulators   Matt Porter
• [PATCH] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Matt Porter
• [PATCH] omap: board-omap3evm: add required smsc911x regulators   Matt Porter
• [PATCH] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Matt Porter
• [PATCH] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Matt Porter
• [PATCH] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Matt Porter
• [PATCH v2] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Matt Porter
• [PATCH 0/2] omap: fix omap2plus defaults for am35xx parts   Matt Porter
• [PATCH v3] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Matt Porter
• [PATCH v2] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators   Matt Porter
• [PATCH v2] davinci_emac: Do not free all rx dma descriptors during init   Rajashekhara, Sudhakar
• [PATCH] ARM: OMAP2: fix mailbox init code   Ramirez Luna, Omar
• [PATCH] ARM: amba: don't include <asm/sizes.h>   Sam Ravnborg
• [PATCH v5 00/27] irq_domain generalization and rework   Sam Ravnborg
• [PATCHv6 7/7] ARM: dma-mapping: add support for IOMMU mapper   Krishna Reddy
• [PATCHv6 7/7] ARM: dma-mapping: add support for IOMMU mapper   Krishna Reddy
• [PATCH v2 00/10] Add PWM framework and device-tree support.   Thierry Reding
• [PATCH v2 01/10] PWM: add pwm framework support   Thierry Reding
• [PATCH v2 02/10] pwm: Allow chips to support multiple PWMs.   Thierry Reding
• [PATCH v2 03/10] of: Add PWM support.   Thierry Reding
• [PATCH v2 04/10] arm/tegra: Fix PWM clock programming   Thierry Reding
• [PATCH v2 05/10] arm/tegra: Provide clock for only one PWM controller   Thierry Reding
• [PATCH v2 06/10] pwm: Add NVIDIA Tegra SoC support   Thierry Reding
• [PATCH v2 07/10] arm/tegra: Add PWFM controller device tree probing   Thierry Reding
• [PATCH v2 08/10] pwm: Add Blackfin support   Thierry Reding
• [PATCH v2 09/10] pwm: Add PXA support   Thierry Reding
• [PATCH v2 10/10] pwm-backlight: Add rudimentary device tree support   Thierry Reding
• [PATCH v2 02/10] pwm: Allow chips to support multiple PWMs.   Thierry Reding
• [PATCH v2 02/10] pwm: Allow chips to support multiple PWMs.   Thierry Reding
• [PATCH v2 02/10] pwm: Allow chips to support multiple PWMs.   Thierry Reding
• [PATCH v2 02/10] pwm: Allow chips to support multiple PWMs.   Thierry Reding
• [PATCH v2 02/10] pwm: Allow chips to support multiple PWMs.   Thierry Reding
• [PATCH v3 00/10] Add PWM framework and device tree support.   Thierry Reding
• [PATCH v3 01/10] PWM: add pwm framework support   Thierry Reding
• [PATCH v3 02/10] pwm: Allow chips to support multiple PWMs.   Thierry Reding
• [PATCH v3 03/10] of: Add PWM support.   Thierry Reding
• [PATCH v3 04/10] arm/tegra: Fix PWM clock programming   Thierry Reding
• [PATCH v3 05/10] arm/tegra: Provide clock for only one PWM controller   Thierry Reding
• [PATCH v3 06/10] pwm: Add NVIDIA Tegra SoC support   Thierry Reding
• [PATCH v3 07/10] arm/tegra: Add PWFM controller device tree probing   Thierry Reding
• [PATCH v3 08/10] pwm: Add Blackfin support   Thierry Reding
• [PATCH v3 09/10] pwm: Add PXA support   Thierry Reding
• [PATCH v3 10/10] pwm-backlight: Add rudimentary device tree support   Thierry Reding
• [PATCH v3 09/10] pwm: Add PXA support   Thierry Reding
• [PATCH v3 00/10] Add PWM framework and device tree support.   Thierry Reding
• [PATCH v3 03/10] of: Add PWM support.   Thierry Reding
• [PATCH v3 02/10] pwm: Allow chips to support multiple PWMs.   Thierry Reding
• [PATCH v3 06/10] pwm: Add NVIDIA Tegra SoC support   Thierry Reding
• [PATCH v3 02/10] pwm: Allow chips to support multiple PWMs.   Thierry Reding
• [PATCH v3 03/10] of: Add PWM support.   Thierry Reding
• [PATCH v3 06/10] pwm: Add NVIDIA Tegra SoC support   Thierry Reding
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Andre Renaud
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Andre Renaud
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Andre Renaud
• [RFC PATCH] davinci_emac: Do not accidentally free all rx dma descriptors during init   Christian Riesch
• [PATCH] davinci_cpdma: Fix channel number written to teardown registers   Christian Riesch
• [PATCH] davinci_mdio: Correct bitmask for clock divider value   Christian Riesch
• [PATCH v2] davinci_emac: Do not free all rx dma descriptors during init   Christian Riesch
• IIO irq allocation fails on AT91SAM9G45   Maxime Ripard
• [PATCH v2 2/2] iommu/omap: fix NULL pointer dereference   Joerg Roedel
• [PATCH v2 2/2] iommu/omap: fix NULL pointer dereference   Joerg Roedel
• [PATCH v2 2/2] iommu/omap: fix NULL pointer dereference   Joerg Roedel
• [PATCH] ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp   Joerg Roedel
• [PATCH] ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp   Joerg Roedel
• [PATCH 4/6 V2] of/mtd/nand: add generic bindings and helpers   Stefan Roese
• [PATCH 4/6 V2] of/mtd/nand: add generic bindings and helpers   Stefan Roese
• [PATCH 4/6 v3] of/mtd/nand: add generic bindings and helpers   Stefan Roese
• [PATCH v2] arm/spear600: fix one-shot timer   Stefan Roese
• [PATCH] arm/io.h: add macros to read/write big/little endian register   Stefan Roese
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Steven Rostedt
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Steven Rostedt
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Steven Rostedt
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Steven Rostedt
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Steven Rostedt
• [PATCH RFC idle 2/3] arm: Avoid invoking RCU when CPU is idle   Steven Rostedt
• [PATCH][RFC] tracing/rcu: Add trace_##name##__rcuidle() static tracepoint for inside rcu_idle_exit() sections   Steven Rostedt
• [PATCH][RFC] tracing/rcu: Add trace_##name##__rcuidle() static tracepoint for inside rcu_idle_exit() sections   Steven Rostedt
• [PATCH][RFC] tracing/rcu: Add trace_##name##__rcuidle() static tracepoint for inside rcu_idle_exit() sections   Steven Rostedt
• linux-next: manual merge of the arm-soc tree with the arm tree   Stephen Rothwell
• [PULL REQUEST] DMA-mapping framework redesign preparation patches   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the arm tree   Stephen Rothwell
• linux-next: manual merge of the akpm tree with the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the akpm tree with the arm-soc tree   Stephen Rothwell
• RFC: rename CONFIG_ARM_AMBA to CONFIG_AMBA   Alessandro Rubini
• [PATCH] ARM: amba: don't include <asm/sizes.h>   Alessandro Rubini
• [PATCH] ARM: amba: don't include <asm/sizes.h>   Alessandro Rubini
• AMBA devices behing a PCI bridge   Alessandro Rubini
• [PATCH] modpost: Fix section warnings for ARM for many compilers   Rusty Russell
• [PATCH 2/12] arch/arm: remove references to cpu_*_map.   Rusty Russell
• [PATCH 1/5] remove references to cpu_*_map in arch/   Rusty Russell
• Possible circular locking dependency (3.3-rc2)   Maciej Rutecki
• [alsa-devel] [RFC PATCH] ARM ASoC: add sound driver for imx27pdk using mc13783 codec   Philippe Rétornaz
• [PATCH 0/6] mmc: omap_hsmmc: Clean up use/abuse of pdev->id   S, Venkatraman
• [PATCH 6/6] mmc: omap_hsmmc: Don't expect MMC1 to always have vmmc supply   S, Venkatraman
• [PATCH v2 6/6] mmc: omap_hsmmc: Don't expect MMC1 to always have vmmc supply   S, Venkatraman
• [PATCH v5 20/27] irq_domain/c6x: constify irq_domain structures   Mark Salter
• [PATCH v5 21/27] irq_domain/c6x: Use library of xlate functions   Mark Salter
• AT91: How copy kernel code to SRAM and execute?   Ulf Samuelsson
• [PATCH] ARM: LPC32xx: Support for OHCI HCD   Wolfram Sang
• [PATCH v2 6/7] LPC32xx: clock.c: USB PLL fix   Wolfram Sang
• [PATCH v3 1/7] ARM: LPC32xx: Added lpc32xx_defconfig   Wolfram Sang
• [PATCH v2 6/7] LPC32xx: clock.c: USB PLL fix   Wolfram Sang
• [PATCH v5] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Wolfram Sang
• [PATCH v5] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Wolfram Sang
• [PATCH v5] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Wolfram Sang
• [PATCH] mtd/gpmi : add gpmi support for mx6q   Wolfram Sang
• [PATCH v6] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Wolfram Sang
• [PATCH RESEND] i2c: mxs: only flag completion when queue is completely done   Wolfram Sang
• [PATCH RESEND] arm: lpc32xx: phy3250: add rtc & touch device   Wolfram Sang
• [PATCH 1/2] GPIO: LPC32xx: Fix missing bit selection mask   Wolfram Sang
• [PATCH v2] USB: Support for LPC32xx SoC   Wolfram Sang
• [PATCH v6] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Wolfram Sang
• [PATCH v2] USB: Support for LPC32xx SoC   Wolfram Sang
• [PATCH v2 5/6] ARM: LPC32xx: serial.c: HW bug workaround   Wolfram Sang
• [PATCH v2 5/6] ARM: LPC32xx: serial.c: HW bug workaround   Wolfram Sang
• [PATCH v3] ARM: LPC32xx: Ethernet support   Wolfram Sang
• [PATCH v6] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Wolfram Sang
• [PATCH 00/16] rmk's patch series for fixing OMAP   Florian Tobias Schandinat
• [PATCH 00/13] sa1100fb cleanups   Florian Tobias Schandinat
• [PATCH 06/12] ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX   Florian Tobias Schandinat
• [PATCH v3] ARM: davinci: map default_queue to edma channels   Heiko Schocher
• [RFC PATCH 1/7] ARM: davinci, intc: Add OF support for TI interrupt controller   Heiko Schocher
• [RFC PATCH 1/7] ARM: davinci, intc: Add OF support for TI interrupt controller   Heiko Schocher
• [RFC PATCH 5/7] ARM: davinci: i2c: add OF support   Heiko Schocher
• [PATCH v2 0/7] ARM: davinci: add support for the am1808 based enbw_cmc board   Heiko Schocher
• [PATCH v2 1/7] ARM: davinci, intc: Add OF support for TI interrupt controller   Heiko Schocher
• [PATCH v2 2/7] ARM: davinci: configure davinci aemif chipselects through OF   Heiko Schocher
• [PATCH v2 3/7] ARM: davinci: mux: add OF support   Heiko Schocher
• [PATCH v2 4/7] ARM: davinci: net: davinci_emac: add OF support   Heiko Schocher
• [PATCH v2 5/7] ARM: davinci: i2c: add OF support   Heiko Schocher
• [PATCH v2 6/7] ARM: mtd: nand: davinci: add OF support for davinci nand controller   Heiko Schocher
• [PATCH v2 7/7] ARM: davinci: add support for the am1808 based enbw_cmc board   Heiko Schocher
• [PATCH v2 1/7] ARM: davinci, intc: Add OF support for TI interrupt controller   Heiko Schocher
• [PATCH] ARM: prevent misaligning of stack by c_backtrace()   Enrico Scholz
• [PATCH] gpio/mxs: support irqs triggered by both edges   Enrico Scholz
• [PATCH v2 3/8] ARM: tegra: rework Tegra secondary CPU core bringup   Peter De Schrijver
• [PATCH v2 0/8] Add tegra30 support for secondary cores   Peter De Schrijver
• [PATCH v2 8/8] ARM: tegra: support for secondary cores on Tegra30   Peter De Schrijver
• [PATCH v3 00/10] Add tegra30 support for secondary cores   Peter De Schrijver
• [PATCH v3 01/10] ARM: tegra: cleanup use of chipid register   Peter De Schrijver
• [PATCH v3 02/10] ARM: tegra: export Tegra chipid   Peter De Schrijver
• [PATCH v3 03/10] ARM: tegra: initialize Tegra chipid early   Peter De Schrijver
• [PATCH v3 04/10] ARM: tegra: functions to access the flowcontroller   Peter De Schrijver
• [PATCH v3 05/10] ARM: tegra: rework Tegra secondary CPU core bringup   Peter De Schrijver
• [PATCH v3 06/10] ARM: tegra: prepare powergate.c for multiple variants   Peter De Schrijver
• [PATCH v3 07/10] ARM: tegra: export tegra_powergate_is_powered()   Peter De Schrijver
• [PATCH v3 08/10] ARM: tegra: add support for Tegra30 powerdomains   Peter De Schrijver
• [PATCH v3 09/10] ARM: tegra: support for Tegra30 CPU powerdomains   Peter De Schrijver
• [PATCH v3 10/10] ARM: tegra: support for secondary cores on Tegra30   Peter De Schrijver
• [PATCH v3 00/10] Add tegra30 support for secondary cores   Peter De Schrijver
• [PATCH] ARM: tegra: Enable CPUIdle on Tegra20   Peter De Schrijver
• [PATCH] ARM: tegra: Avoid compiling cpuidle code when not configured   Peter De Schrijver
• elf_set_personality()   Peter De Schrijver
• elf_set_personality()   Peter De Schrijver
• [PATCH v3 00/10] Add tegra30 support for secondary cores   Peter De Schrijver
• i.MX SDMA questions   Matt Sealey
• i.MX SDMA questions   Matt Sealey
• [PATCH 1/2] arm: orion5x: use native hex2bin()   Andy Shevchenko
• [PATCH 2/2] arm: orion5x: print mac address with %pM   Andy Shevchenko
• [PATCH v2 2/2] mxs-dma : rewrite the last parameter of mxs_dma_prep_slave_sg()   Huang Shijie
• [PATCH resent v2 1/2] ioport : add DEFINE_RES_DMA_SIZE_NAMED macro   Huang Shijie
• [PATCH resent v2 1/2] ioport : add DEFINE_RES_DMA_SIZE_NAMED macro   Huang Shijie
• [PATCH resend v3] ARM: mxs: add GPMI-NAND support for imx23/imx28   Huang Shijie
• [PATCH] mtd/gpmi : add gpmi support for mx6q   Huang Shijie
• [PATCH v3 0/2] patch set about the MXS-DMA   Huang Shijie
• [PATCH v3 1/2] mxs-dma : move the mxs dma.h to a more common place   Huang Shijie
• [PATCH v3 2/2] mxs-dma : rewrite the last parameter of mxs_dma_prep_slave_sg()   Huang Shijie
• [PATCH v3 1/2] mxs-dma : move the mxs dma.h to a more common place   Huang Shijie
• [PATCH v4 0/2] patch set about the MXS-DMA   Huang Shijie
• [PATCH v4 1/2] mxs-dma : move the mxs dma.h to a more common place   Huang Shijie
• [PATCH v4 2/2] mxs-dma : rewrite the last parameter of mxs_dma_prep_slave_sg()   Huang Shijie
• [PATCH v5 0/2] patch set about the MXS-DMA   Huang Shijie
• [PATCH v5 1/2] mxs-dma : move the mxs dma.h to a more common place   Huang Shijie
• [PATCH v5 2/2] mxs-dma : rewrite the last parameter of mxs_dma_prep_slave_sg()   Huang Shijie
• [PATCH v2] mtd/gpmi : add gpmi support for mx6q   Huang Shijie
• [PATCH] mtd/gpmi : fix compiler warning   Huang Shijie
• [PATCH] mtd: fix the wrong check condition   Huang Shijie
• [PATCH] mtd/gpmi : add gpmi support for mx6q   Huang Shijie
• [PATCH v5 2/2] mxs-dma : rewrite the last parameter of mxs_dma_prep_slave_sg()   Huang Shijie
• [PATCH v5 2/2] mxs-dma : rewrite the last parameter of mxs_dma_prep_slave_sg()   Huang Shijie
• [PATCH] mtd/gpmi : add gpmi support for mx6q   Huang Shijie
• [PATCH] mtd: fix the wrong check condition   Huang Shijie
• [PATCH] mtd/gpmi : add gpmi support for mx6q   Huang Shijie
• [PATCH v2] mtd/gpmi : add gpmi support for mx6q   Huang Shijie
• [PATCH v6 0/2] patch set about the MXS-DMA   Huang Shijie
• [PATCH v6 1/2] mxs-dma : move the mxs dma.h to a more common place   Huang Shijie
• [PATCH v6 2/2] mxs-dma : rewrite the last parameter of mxs_dma_prep_slave_sg()   Huang Shijie
• [PATCH] mtd: fix the wrong check condition   Huang Shijie
• [PATCH] mtd : change the location of the ONFI detected log   Huang Shijie
• [PATCH v6 0/2] patch set about the MXS-DMA   Huang Shijie
• [PATCH v6 0/2] patch set about the MXS-DMA   Huang Shijie
• [PATCH v6 0/2] patch set about the MXS-DMA   Huang Shijie
• 答复: [PATCH] mtd/gpmi : add gpmi support for mx6q   Huang Shijie-B32955
• 答复: 答复: [PATCH] mtd/gpmi : add gpmi support for mx6q   Huang Shijie-B32955
• OMAP3 L2/outer cache enabled in kernel (after being disabled by uBoot)?   Shilimkar, Santosh
• [PATCH 0/2] Errata workaround updates   Shilimkar, Santosh
• [PATCH 1/2] ARM: OMAP3: PM: remove superfluous calls to pwrdm_clear_all_prev_pwrst()   Shilimkar, Santosh
• [PATCH 1/2] ARM: OMAP3: PM: remove superfluous calls to pwrdm_clear_all_prev_pwrst()   Shilimkar, Santosh
• [PATCH 1/2] ARM: OMAP3: PM: remove superfluous calls to pwrdm_clear_all_prev_pwrst()   Shilimkar, Santosh
• [PATCH 0/2] ARM: OMAP2+: PM: code consolidation for 3.4   Shilimkar, Santosh
• [PATCH 0/2] ARM: OMAP: Couple of misc fixes for 3.3   Santosh Shilimkar
• [PATCH 1/2] ARM: OMAP: Get rid of reset for system timer   Santosh Shilimkar
• [PATCH 2/2] ARM: OMAP4: Move the barrier memboclk_steal() as part of reserve callback   Santosh Shilimkar
• [PATCH 1/2] ARM: OMAP3: PM: remove superfluous calls to pwrdm_clear_all_prev_pwrst()   Shilimkar, Santosh
• [PATCH 1/2] ARM: OMAP: Get rid of reset for system timer   Shilimkar, Santosh
• [RFC/PATCH] arm: omap3: pm: do not clear power states twice   Shilimkar, Santosh
• [PATCH v9 01/25] gpio/omap: remove dependency on gpio_bank_count   Shilimkar, Santosh
• [PATCH v9 01/25] gpio/omap: remove dependency on gpio_bank_count   Shilimkar, Santosh
• [PATCH 0/2] ARM: OMAP: Couple of misc fixes for 3.3   Shilimkar, Santosh
• [PATCH] ARM: OMAP4: cpuidle: Fix the C-state reporting to cpuidle governor.   Santosh Shilimkar
• [PATCH] ARM: OMAP2: Fix the OMAP2 only build break seen with 2011+ ARM tool-chains   Santosh Shilimkar
• oprofile and ARM A9 hardware counter   Shilimkar, Santosh
• oprofile and ARM A9 hardware counter   Shilimkar, Santosh
• oprofile and ARM A9 hardware counter   Shilimkar, Santosh
• [PATCH 1/2] ARM: OMAP: Get rid of reset for system timer   Shilimkar, Santosh
• [PATCH] ARM: OMAP4: cpuidle: Fix the C-state reporting to cpuidle governor.   Santosh Shilimkar
• [PATCH 2/2] ARM: OMAP4: Move the barrier memboclk_steal() as part of reserve callback   Santosh Shilimkar
• [PATCH 2/2] ARM: OMAP4: Move the barrier memboclk_steal() as part of reserve callback   Shilimkar, Santosh
• [PATCHv2 7/8] arm: omap: clockdomain: add support for preventing domain transitions   Shilimkar, Santosh
• [PATCHv2 8/8] arm: omap3: prevent per_clkdm from attempting manual domain transitions   Shilimkar, Santosh
• [PATCHv2 8/8] arm: omap3: prevent per_clkdm from attempting manual domain transitions   Shilimkar, Santosh
• SMP local timers and their CPUfreq notifiers setup on OMAP3   Santosh Shilimkar
• SMP local timers and their CPUfreq notifiers setup on OMAP3   Shilimkar, Santosh
• [PATCH] arm: smp-twd: check for uninitialized clock in twd_cpufreq_init   Shilimkar, Santosh
• SMP local timers and their CPUfreq notifiers setup on OMAP3   Santosh Shilimkar
• oprofile and ARM A9 hardware counter   Shilimkar, Santosh
• SMP local timers and their CPUfreq notifiers setup on OMAP3   Shilimkar, Santosh
• SMP local timers and their CPUfreq notifiers setup on OMAP3   Shilimkar, Santosh
• [PATCH 0/2] OMAP: Section mismatch warning fixes   Santosh Shilimkar
• [PATCH 1/2] ARM: OMAP: fix section mismatch warning for omap4_hotplug_cpu()   Santosh Shilimkar
• [PATCH 2/2] ARM: OMAP: Fix section mismatch warning for platform_cpu_die()   Santosh Shilimkar
• [PATCH 2/2] ARM: OMAP: Fix section mismatch warning for platform_cpu_die()   Shilimkar, Santosh
• [PATCH 0/6] gpio/omap: Some more driver cleanup and fixes   Shilimkar, Santosh
• [PATCH 1/6] arm: omap4: suspend: Program all domains to RET   Shilimkar, Santosh
• [PATCH 2/6] ARM: OMAP4 PM: Add IO Daisychain support   Shilimkar, Santosh
• [PATCH 3/6] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux   Shilimkar, Santosh
• [PATCH 5/6] ARM: OMAP4: suspend: Do not get dsp/tesla out of reset   Shilimkar, Santosh
• [PATCH 1/5] ARM: OMAP2+: l3_noc: Remove references to static IRQ defines   Shilimkar, Santosh
• [PATCH 3/5] ARM: OMAP2+: wakeupgen: Fix wrong array size for irq_target_cpu   Shilimkar, Santosh
• [PATCH 2/5] ARM: OMAP: irqs: Delete irqs-44xx.h file   Shilimkar, Santosh
• [PATCH 4/5] ARM: OMAP2+: gpmc: Use irq_alloc_descs instead of static IRQ range   Shilimkar, Santosh
• [PATCH 2/6] ARM: OMAP4 PM: Add IO Daisychain support   Shilimkar, Santosh
• [PATCH 1/2] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Shilimkar, Santosh
• [PATCH 2/2] cpufreq: OMAP: remove loops_per_jiffy recalculate for smp   Shilimkar, Santosh
• [PATCHv3 0/4] ARM: OMAP4: core retention support   Shilimkar, Santosh
• [RFC PATCH 7/7] ARM: davinci: add support for the am1808 based enbw_cmc board   Sergei Shtylyov
• [PATCH] pinctrl: restore pin naming   Sergei Shtylyov
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Sergei Shtylyov
• [PATCH 3.3] OMAP4: PRM: fix build breakage when CONFIG_OF is not defined   Sergei Shtylyov
• [PATCH V3 1/1] dt: add of_get_child_count helper function   Sergei Shtylyov
• [PATCH 03/14 v2] MIPS: adapt for dma_map_ops changes   Sergei Shtylyov
• [PATCH 6/7] Add hugetlb Kconfig option   Sergei Shtylyov
• [PATCH] arm: smp-twd: check for uninitialized clock in twd_cpufreq_init   Sergei Shtylyov
• [PATCH] ARM: plat-mxc: audmux-v1: Remove unneeded ifdef's   Sergei Shtylyov
• [PATCH v2] ARM: plat-mxc: audmux-v1: Remove unneeded ifdef's   Sergei Shtylyov
• [PATCH 2/2] ARM: OMAP2: remove some orphan function declarations.   Sergei Shtylyov
• [PATCH 1/2] ARM: OMAP2+: UART: remove unused fields in omap_uart_state.   Sergei Shtylyov
• [PATCH v2 1/7] ARM: davinci, intc: Add OF support for TI interrupt controller   Sergei Shtylyov
• [PATCH 4/4] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Sergei Shtylyov
• [PATCH 4/7] ARM: OMAP2+: Fix zoom LCD backlight if TWL_CORE is not selected   Sergei Shtylyov
• [PATCH 07/13] DMA:mmp:remove redundant dma drivers   Sergei Shtylyov
• [PATCH v2 1/7] ARM: davinci, intc: Add OF support for TI interrupt controller   Sergei Shtylyov
• [PATCH 3/5] omap-serial: Fix the error handling in the omap_serial probe   Shubhrajyoti
• OMAP34xx   Shubhrajyoti
• [PATCH 00/10] I2C updates   Shubhrajyoti
• [PATCH 2/5] gpio/omap: Use devm_ API and add request_mem_region   Shubhrajyoti
• [PATCH 2/2] ARM: OMAP2: remove some orphan function declarations.   Shubhrajyoti
• [PATCH 5/6] gpio/omap: fix trigger type to unsigned   Shubhrajyoti
• [PATCH 00/10] I2C updates   Shubhrajyoti
• [PATCH 00/10] I2C updates   Shubhrajyoti
• [PATCH v2 1/5] spi/omap: Remove bus_num usage for instance index   Shubhrajyoti
• [PATCH] MAINTAINERS: Update ARM/FREESCALE IMX entry   Baruch Siach
• [PATCH] MAINTAINERS: Update ARM/FREESCALE IMX entry   Baruch Siach
• How to deal with a PHY configuration related to the board?   Baruch Siach
• [2.6.39.3] [MX25] oops in driver_register for ADC touchscreen support (imx_adc_ts)   Baruch Siach
• [2.6.39.3] [MX25] oops in driver_register for ADC touchscreen support (imx_adc_ts)   Baruch Siach
• [2.6.39.3] [MX25] oops in driver_register for ADC touchscreen support (imx_adc_ts)   Baruch Siach
• [2.6.39.3] [MX25] oops in driver_register for ADC touchscreen support (imx_adc_ts)   Baruch Siach
• [PATCH v2] ARM: LPC32xx: Ethernet driver   Baruch Siach
• iMX53 quick start board and SD/MMC   Baruch Siach
• iMX53 quick start board and SD/MMC   Baruch Siach
• [MX25][MMC] mmc esdhc failure in 3.3-rc5   Baruch Siach
• [PATCH v3 22/25] irq_domain/x86: Convert x86 (embedded) to use common irq_domain   Sebastian Andrzej Siewior
• [RFC / PATCH] arm/davinci: optimize the DMA ISR   Sebastian Andrzej Siewior
• [PATCH v3 22/25] irq_domain/x86: Convert x86 (embedded) to use common irq_domain   Sebastian Andrzej Siewior
• remoteproc: Load coprocessor code to the specific main memory location   Michal Simek
• remoteproc: Load coprocessor code to the specific main memory location   Michal Simek
• remoteproc: Load coprocessor code to the specific main memory location   Michal Simek
• remoteproc: Load coprocessor code to the specific main memory location   Michal Simek
• remoteproc: Load coprocessor code to the specific main memory location   Michal Simek
• remoteproc: Load coprocessor code to the specific main memory location   Michal Simek
• remoteproc: Load coprocessor code to the specific main memory location   Michal Simek
• remoteproc: Load coprocessor code to the specific main memory location   Michal Simek
• [PATCH v5] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Barry Song
• [PATCH v5] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Barry Song
• [PATCH v5] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Barry Song
• [PATCH v6] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Barry Song
• [PATCH v3] SPI: add CSR SiRFprimaII SPI controller driver   Barry Song
• [PATCH v3] SPI: add CSR SiRFprimaII SPI controller driver   Barry Song
• [PATCH v3] SPI: add CSR SiRFprimaII SPI controller driver   Barry Song
• [PATCH v3] SPI: add CSR SiRFprimaII SPI controller driver   Barry Song
• [PATCH v3] SPI: add CSR SiRFprimaII SPI controller driver   Barry Song
• [PATCH] serial/sirf: fixup for changes to pin control   Barry Song
• [PATCH v6] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Barry Song
• [Linaro-mm-sig] [PATCHv23 00/16] Contiguous Memory Allocator   Barry Song
• [Linaro-mm-sig] [PATCHv23 12/16] mm: trigger page reclaim in alloc_contig_range() to stabilise watermarks   Barry Song
• [Linaro-mm-sig] [PATCHv23 13/16] drivers: add Contiguous Memory Allocator   Barry Song
• [Linaro-mm-sig] [PATCHv23 00/16] Contiguous Memory Allocator   Barry Song
• [Linaro-mm-sig] [PATCHv23 00/16] Contiguous Memory Allocator   Barry Song
• [PATCH v3 1/1] rc: Add support for GPIO based IR Receiver driver.   Trilok Soni
• [PATCH-WIP 00/13] xen/arm: receive Xen events and initialize xenbus   Stefano Stabellini
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Stefano Stabellini
• [PATCH-WIP 02/13] xen/arm: introduce privcmp, physdev_op and memory_op hypercalls.   Stefano Stabellini
• [PATCH-WIP 03/13] xen/arm: mmu.h and page.h related definitions   Stefano Stabellini
• [PATCH-WIP 04/13] xen/arm: sync_bitops   Stefano Stabellini
• [PATCH-WIP 05/13] xen/arm: empty implementation of grant_table arch specific functions   Stefano Stabellini
• [PATCH-WIP 06/13] xen/arm: missing includes   Stefano Stabellini
• [PATCH-WIP 07/13] xen/arm: receive xen events on arm   Stefano Stabellini
• [PATCH-WIP 08/13] xen/arm: fix arm xen guest handle definitions   Stefano Stabellini
• [PATCH-WIP 09/13] xen/arm: shared_info and start_info   Stefano Stabellini
• [PATCH-WIP 10/13] xen/arm: empty implementation of xen_remap_domain_mfn_range   Stefano Stabellini
• [PATCH-WIP 11/13] xen/arm: Introduce xen_pfn_t for pfn and mfn types   Stefano Stabellini
• [PATCH-WIP 12/13] xen/arm: compile and run xenbus   Stefano Stabellini
• [PATCH-WIP 13/13] xen/arm: compile grant-table features events and xenbus, do not compile pci   Stefano Stabellini
• [PATCH-WIP 07/13] xen/arm: receive xen events on arm   Stefano Stabellini
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Stefano Stabellini
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Stefano Stabellini
• [PATCH-WIP 01/13] xen/arm: use r12 to pass the hypercall number to the hypervisor   Stefano Stabellini
• [PATCH 1/5] USB: sa1111: sparse and checkpatch cleanups   Alan Stern
• [PATCH v2] USB: Support for LPC32xx SoC   Alan Stern
• [PATCH v2] USB: Support for LPC32xx SoC   Alan Stern
• [PATCH v2] USB: Support for LPC32xx SoC   Alan Stern
• [PATCH v2] USB: Support for LPC32xx SoC   Alan Stern
• [PATCH v2] USB: Support for LPC32xx SoC   Alan Stern
• Kirkwood, kernel 3.2, vmalloc region overlap, not starting up   Johannes Stezenbach
• [PATCH v2 6/7] LPC32xx: clock.c: USB PLL fix   Roland Stigge
• [PATCH] ARM: LPC32xx: Ethernet support   Roland Stigge
• [PATCH v2 6/7] LPC32xx: clock.c: USB PLL fix   Roland Stigge
• [PATCH] ARM: LPC32xx: Support for OHCI HCD   Roland Stigge
• [PATCH v4 0/7] ARM: Fixes to make LPC32xx compile and boot again   Roland Stigge
• [PATCH v4 1/7] ARM: LPC32xx: Added lpc32xx_defconfig   Roland Stigge
• [PATCH v4 2/7] ARM: LPC32XX: Remove broken non-static declaration   Roland Stigge
• [PATCH v4 3/7] ARM: LPC32xx: clock.c: Missing header file   Roland Stigge
• [PATCH v4 4/7] ARM: LPC32xx: clock.c: jiffies wrapping   Roland Stigge
• [PATCH v4 5/7] ARM: LPC32xx: clock.c: Clock registration fixes   Roland Stigge
• [PATCH v4 6/7] ARM: LPC32xx: clock.c: warning fix   Roland Stigge
• [PATCH v4 7/7] ARM: LPC32xx: clock.c: Fix mutex lock issues   Roland Stigge
• [PATCH v4 0/7] ARM: Fixes to make LPC32xx compile and boot again   Roland Stigge
• [PATCH v4 0/7] ARM: Fixes to make LPC32xx compile and boot again   Roland Stigge
• [PATCH 0/6] ARM: LPC32xx: Second patch set w/ fixes and completion for this arch   Roland Stigge
• [PATCH 1/6] ARM: LPC32xx: Fix gpio-lpc32xx.c: Pin masking missing   Roland Stigge
• [PATCH 2/6] ARM: LPC32xx: Add output reading to GPO P3   Roland Stigge
• [PATCH 3/6] ARM: LPC32xx: Fix irq on GPI_28   Roland Stigge
• [PATCH 4/6] ARM: LPC32xx: Fix missing and bad LPC32XX macros   Roland Stigge
• [PATCH 5/6] ARM: LPC32xx: Fix interrupt controller init   Roland Stigge
• [PATCH 6/6] ARM: LPC32xx: irq.c: Clear latched event   Roland Stigge
• [PATCH v3] ARM: LPC32xx: ADC support   Roland Stigge
• [PATCH v4] ARM: LPC32xx: ADC support for mach-lpc32xx   Roland Stigge
• [PATCH v5] ARM: LPC32xx: ADC support for mach-lpc32xx   Roland Stigge
• [PATCH 1/2] GPIO: LPC32xx: Fix missing bit selection mask   Roland Stigge
• [PATCH 2/2] GPIO: LPC32xx: Add output reading to GPO P3   Roland Stigge
• [PATCH v2 1/2] GPIO: LPC32xx: Fix missing bit selection mask   Roland Stigge
• [PATCH v2 2/2] GPIO: LPC32xx: Add output reading to GPO P3   Roland Stigge
• [PATCH v2] USB: Support for LPC32xx SoC   Roland Stigge
• [PATCH v2] ARM: LPC32xx: USB Support   Roland Stigge
• [PATCH v2] USB: Support for LPC32xx SoC   Roland Stigge
• [PATCH v2] ARM: LPC32xx: USB Support   Roland Stigge
• [PATCH v3 1/2] GPIO: LPC32xx: Fix missing bit selection mask   Roland Stigge
• [PATCH v3 2/2] GPIO: LPC32xx: Add output reading to GPO P3   Roland Stigge
• [PATCH v3] USB: Support for LPC32xx SoC   Roland Stigge
• [PATCH v3] ARM: LPC32xx: USB Support   Roland Stigge
• [PATCH v2] USB: Support for LPC32xx SoC   Roland Stigge
• [PATCH v2 0/6] ARM: LPC32xx: Patch set with further fixes for LPC32xx   Roland Stigge
• [PATCH v2 1/6] ARM: LPC32xx: Fix irq on GPI_28   Roland Stigge
• [PATCH v2 2/6] ARM: LPC32xx: Fix missing and bad LPC32XX macros   Roland Stigge
• [PATCH v2 3/6] ARM: LPC32xx: Fix interrupt controller init   Roland Stigge
• [PATCH v2 4/6] ARM: LPC32xx: irq.c: Clear latched event   Roland Stigge
• [PATCH v2 5/6] ARM: LPC32xx: serial.c: HW bug workaround   Roland Stigge
• [PATCH v2 6/6] ARM: LPC32xx: serial.c: Fixed loop limit   Roland Stigge
• [GIT PULL] LPC32xx fixes for v3.3-rc4   Roland Stigge
• [PATCH v2] ARM: LPC32xx: Ethernet driver   Roland Stigge
• [PATCH v2] ARM: LPC32xx: Ethernet support   Roland Stigge
• [PATCH v2 5/6] ARM: LPC32xx: serial.c: HW bug workaround   Roland Stigge
• [GIT PULL] LPC32xx fixes for v3.3-rc4   Roland Stigge
• [PATCH v3] lpc32xx: Added ethernet driver   Roland Stigge
• [PATCH v3] ARM: LPC32xx: Ethernet support   Roland Stigge
• [PATCH v2 5/6] ARM: LPC32xx: serial.c: HW bug workaround   Roland Stigge
• [PATCH v3] ARM: LPC32xx: Ethernet support   Roland Stigge
• [PATCH v2] ARM: LPC32xx: Ethernet driver   Roland Stigge
• [PATCH v2] ARM: LPC32xx: Ethernet driver   Roland Stigge
• [PATCH v3] ARM: LPC32xx: USB Support   Roland Stigge
• [BUG] Multiple definition of pcibios_max_latency   Myron Stowe
• [BUG] Multiple definition of pcibios_max_latency   Myron Stowe
• [PATCH 3/3] S3C2443: add power domain for usb phy   Heiko Stübner
• [PATCH] ARM: s3c2440: fix undefined reference to `s3c2440_restart' for machine gta02   Heiko Stübner
• [PATCH] ARM: S3C24XX: Fix restart on S3C2442   Heiko Stübner
• [PATCH] ARM: S3C24XX: Fix restart on S3C2442   Heiko Stübner
• [PATCH] ARM: S3C24XX: Fix restart on S3C2442   Heiko Stübner
• [PATCH v2] cpufreq: Add S3C2416/S3C2450 cpufreq driver   Heiko Stübner
• [PATCH v2] cpufreq: Add S3C2416/S3C2450 cpufreq driver   Heiko Stübner
• [PATCH 09/12] ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/   Heiko Stübner
• [PATCH 0/2] Move some stuff into the new mach-s3c24xx   Heiko Stübner
• [PATCH 1/2] ARM: S3C24XX: Move s3c2443-clock.c to mach-s3c24xx   Heiko Stübner
• [PATCH 2/2] ARM: S3C24XX: Move the DMA base code to mach-s3c24xx   Heiko Stübner
• [PATCH 1/2] ARM: S3C24XX: Move s3c2443-clock.c to mach-s3c24xx   Heiko Stübner
• [PATCH v2] ARM: S3C24XX: Move s3c2443-clock.c to mach-s3c24xx   Heiko Stübner
• [PATCH v3] S3C24XX DMA resume regression fix   Heiko Stübner
• [PATCH] Add poll_get_char & poll_put_char to uart_ops for the samsung UARTS.   Heiko Stübner
• [PATCH 09/12] ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/   Heiko Stübner
• [PATCH] Move S3C2412_PM_SLEEP to common platform code   Heiko Stübner
• [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP   Heiko Stübner
• mv_cesa hash functions   Phil Sutter
• [PATCH] ep93xx: fix build of vision_ep93xx.c   H Hartley Sweeten
• [PATCH v2 4/4] ARM: remove empty disable_fiq and arch_ret_to_user macros   H Hartley Sweeten
• [PATCH v2 3/4] ARM: make entry-macro.S depend on !MULTI_IRQ_HANDLER   H Hartley Sweeten
• [PATCH] ep93xx: fix build of vision_ep93xx.c   H Hartley Sweeten
• [PATCH] ep93xx: fix build of vision_ep93xx.c   H Hartley Sweeten
• [PATCH 03/15] ARM: provide runtime hook for ioremap   H Hartley Sweeten
• [PATCH 02/15] ARM: add explicit include of system.h to processor.h   H Hartley Sweeten
• [PATCH 13/15] ARM: make mach/io.h include optional   H Hartley Sweeten
• [PATCH 11/15] ARM: ep93xx: clean-up mach/io.h   H Hartley Sweeten
• [PATCH 14/15] ARM: remove bunch of now unused mach/io.h files   H Hartley Sweeten
• [PATCH 13/15] ARM: make mach/io.h include optional   H Hartley Sweeten
• [PATCH 13/15] ARM: make mach/io.h include optional   H Hartley Sweeten
• ARM: ep93xx: convert vision_ep9307 to MULTI_IRQ_HANDLER   H Hartley Sweeten
• [PATCH v2 16/28] ARM: remove bunch of now unused mach/io.h files   H Hartley Sweeten
• [PATCH v2 15/28] ARM: make mach/io.h include optional   H Hartley Sweeten
• [PATCHv19 00/15] Contiguous Memory Allocator   Marek Szyprowski
• [PATCH 02/15] mm: page_alloc: update migrate type of pages on pcp when isolating   Marek Szyprowski
• [PATCHv20 00/15] Contiguous Memory Allocator   Marek Szyprowski
• [PATCH 01/15] mm: page_alloc: remove trailing whitespace   Marek Szyprowski
• [PATCH 02/15] mm: compaction: introduce isolate_migratepages_range().   Marek Szyprowski
• [PATCH 03/15] mm: compaction: introduce map_pages()   Marek Szyprowski
• [PATCH 04/15] mm: compaction: introduce isolate_freepages_range()   Marek Szyprowski
• [PATCH 05/15] mm: compaction: export some of the functions   Marek Szyprowski
• [PATCH 06/15] mm: page_alloc: introduce alloc_contig_range()   Marek Szyprowski
• [PATCH 07/15] mm: page_alloc: change fallbacks array handling   Marek Szyprowski
• [PATCH 08/15] mm: mmzone: MIGRATE_CMA migration type added   Marek Szyprowski
• [PATCH 09/15] mm: page_isolation: MIGRATE_CMA isolation functions added   Marek Szyprowski
• [PATCH 10/15] mm: extract reclaim code from __alloc_pages_direct_reclaim()   Marek Szyprowski
• [PATCH 11/15] mm: trigger page reclaim in alloc_contig_range() to stabilize watermarks   Marek Szyprowski
• [PATCH 12/15] drivers: add Contiguous Memory Allocator   Marek Szyprowski
• [PATCH 13/15] X86: integrate CMA with DMA-mapping subsystem   Marek Szyprowski
• [PATCH 14/15] ARM: integrate CMA with DMA-mapping subsystem   Marek Szyprowski
• [PATCH 15/15] ARM: Samsung: use CMA for 2 memory banks for s5p-mfc device   Marek Szyprowski
• [PATCH 11/15] mm: trigger page reclaim in alloc_contig_range() to stabilize watermarks   Marek Szyprowski
• [PATCH 11/15] mm: trigger page reclaim in alloc_contig_range() to stabilize watermarks   Marek Szyprowski
• [PATCHv21 00/16] Contiguous Memory Allocator   Marek Szyprowski
• [PATCHv21 01/16] mm: page_alloc: remove trailing whitespace   Marek Szyprowski
• [PATCHv21 02/16] mm: compaction: introduce isolate_migratepages_range()   Marek Szyprowski
• [PATCHv21 03/16] mm: compaction: introduce map_pages()   Marek Szyprowski
• [PATCHv21 04/16] mm: compaction: introduce isolate_freepages_range()   Marek Szyprowski
• [PATCHv21 05/16] mm: compaction: export some of the functions   Marek Szyprowski
• [PATCHv21 06/16] mm: page_alloc: introduce alloc_contig_range()   Marek Szyprowski
• [PATCHv21 07/16] mm: page_alloc: change fallbacks array handling   Marek Szyprowski
• [PATCHv21 08/16] mm: mmzone: MIGRATE_CMA migration type added   Marek Szyprowski
• [PATCHv21 09/16] mm: page_isolation: MIGRATE_CMA isolation functions added   Marek Szyprowski
• [PATCHv21 10/16] mm: Serialize access to min_free_kbytes   Marek Szyprowski
• [PATCHv21 11/16] mm: extract reclaim code from __alloc_pages_direct_reclaim()   Marek Szyprowski
• [PATCHv21 12/16] mm: trigger page reclaim in alloc_contig_range() to stabilise watermarks   Marek Szyprowski
• [PATCHv21 13/16] drivers: add Contiguous Memory Allocator   Marek Szyprowski
• [PATCHv21 14/16] X86: integrate CMA with DMA-mapping subsystem   Marek Szyprowski
• [PATCHv21 15/16] ARM: integrate CMA with DMA-mapping subsystem   Marek Szyprowski
• [PATCHv21 16/16] ARM: Samsung: use CMA for 2 memory banks for s5p-mfc device   Marek Szyprowski
• [PATCHv19 00/15] Contiguous Memory Allocator   Marek Szyprowski
• [PULL REQUEST] DMA-mapping framework redesign preparation patches   Marek Szyprowski
• [PATCHv6 0/7] ARM: DMA-mapping framework redesign   Marek Szyprowski
• [PATCHv6 1/7] ARM: dma-mapping: remove offset parameter to prepare for generic dma_ops   Marek Szyprowski
• [PATCHv6 2/7] ARM: dma-mapping: use asm-generic/dma-mapping-common.h   Marek Szyprowski
• [PATCHv6 3/7] ARM: dma-mapping: implement dma sg methods on top of any generic dma ops   Marek Szyprowski
• [PATCHv6 4/7] ARM: dma-mapping: move all dma bounce code to separate dma ops structure   Marek Szyprowski
• [PATCHv6 5/7] ARM: dma-mapping: remove redundant code and cleanup   Marek Szyprowski
• [PATCHv6 6/7] ARM: dma-mapping: use alloc, mmap, free from dma_ops   Marek Szyprowski
• [PATCHv6 7/7] ARM: dma-mapping: add support for IOMMU mapper   Marek Szyprowski
• [PATCH 03/14 v2] MIPS: adapt for dma_map_ops changes   Marek Szyprowski
• [PATCH 04/14 v2] PowerPC: adapt for dma_map_ops changes   Marek Szyprowski
• [PATCH] Hexagon: adapt for dma_map_ops changes   Marek Szyprowski
• [PATCH 03/14 v3] MIPS: adapt for dma_map_ops changes   Marek Szyprowski
• [PATCHv22 00/16] Contiguous Memory Allocator   Marek Szyprowski
• [PATCHv22 01/16] mm: page_alloc: remove trailing whitespace   Marek Szyprowski
• [PATCHv22 02/16] mm: compaction: introduce isolate_migratepages_range()   Marek Szyprowski
• [PATCHv22 03/16] mm: compaction: introduce map_pages()   Marek Szyprowski
• [PATCHv22 04/16] mm: compaction: introduce isolate_freepages_range()   Marek Szyprowski
• [PATCHv22 05/16] mm: compaction: export some of the functions   Marek Szyprowski
• [PATCHv22 06/16] mm: page_alloc: introduce alloc_contig_range()   Marek Szyprowski
• [PATCHv22 07/16] mm: page_alloc: change fallbacks array handling   Marek Szyprowski
• [PATCHv22 08/16] mm: mmzone: MIGRATE_CMA migration type added   Marek Szyprowski
• [PATCHv22 09/16] mm: page_isolation: MIGRATE_CMA isolation functions added   Marek Szyprowski
• [PATCHv22 10/16] mm: Serialize access to min_free_kbytes   Marek Szyprowski
• [PATCHv22 11/16] mm: extract reclaim code from __alloc_pages_direct_reclaim()   Marek Szyprowski
• [PATCHv22 12/16] mm: trigger page reclaim in alloc_contig_range() to stabilise watermarks   Marek Szyprowski
• [PATCHv22 13/16] drivers: add Contiguous Memory Allocator   Marek Szyprowski
• [PATCHv22 14/16] X86: integrate CMA with DMA-mapping subsystem   Marek Szyprowski
• [PATCHv22 15/16] ARM: integrate CMA with DMA-mapping subsystem   Marek Szyprowski
• [PATCHv22 16/16] ARM: Samsung: use CMA for 2 memory banks for s5p-mfc device   Marek Szyprowski
• [PATCHv22 13/16] drivers: add Contiguous Memory Allocator   Marek Szyprowski
• [PATCHv22 14/16] X86: integrate CMA with DMA-mapping subsystem   Marek Szyprowski
• [PATCHv23 00/16] Contiguous Memory Allocator   Marek Szyprowski
• [PATCHv23 01/16] mm: page_alloc: remove trailing whitespace   Marek Szyprowski
• [PATCHv23 02/16] mm: compaction: introduce isolate_migratepages_range()   Marek Szyprowski
• [PATCHv23 03/16] mm: compaction: introduce map_pages()   Marek Szyprowski
• [PATCHv23 04/16] mm: compaction: introduce isolate_freepages_range()   Marek Szyprowski
• [PATCHv23 05/16] mm: compaction: export some of the functions   Marek Szyprowski
• [PATCHv23 06/16] mm: page_alloc: introduce alloc_contig_range()   Marek Szyprowski
• [PATCHv23 07/16] mm: page_alloc: change fallbacks array handling   Marek Szyprowski
• [PATCHv23 08/16] mm: mmzone: MIGRATE_CMA migration type added   Marek Szyprowski
• [PATCHv23 09/16] mm: page_isolation: MIGRATE_CMA isolation functions added   Marek Szyprowski
• [PATCHv23 10/16] mm: Serialize access to min_free_kbytes   Marek Szyprowski
• [PATCHv23 11/16] mm: extract reclaim code from __alloc_pages_direct_reclaim()   Marek Szyprowski
• [PATCHv23 12/16] mm: trigger page reclaim in alloc_contig_range() to stabilise watermarks   Marek Szyprowski
• [PATCHv23 13/16] drivers: add Contiguous Memory Allocator   Marek Szyprowski
• [PATCHv23 14/16] X86: integrate CMA with DMA-mapping subsystem   Marek Szyprowski
• [PATCHv23 15/16] ARM: integrate CMA with DMA-mapping subsystem   Marek Szyprowski
• [PATCHv23 16/16] ARM: Samsung: use CMA for 2 memory banks for s5p-mfc device   Marek Szyprowski
• [PATCHv6 7/7] ARM: dma-mapping: add support for IOMMU mapper   Marek Szyprowski
• [PATCHv6 7/7] ARM: dma-mapping: add support for IOMMU mapper   Marek Szyprowski
• [PATCHv6 7/7] ARM: dma-mapping: add support for IOMMU mapper   Marek Szyprowski
• [PATCHv6 3/7] ARM: dma-mapping: implement dma sg methods on top of any generic dma ops   Marek Szyprowski
• [PATCH v8 0/2] ommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   Marek Szyprowski
• [PATCHv6 7/7] ARM: dma-mapping: add support for IOMMU mapper   Marek Szyprowski
• [PATCH v8 0/2] ommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   Marek Szyprowski
• [PATCHv7 0/9] ARM: DMA-mapping framework redesign   Marek Szyprowski
• [PATCHv7 1/9] ARM: dma-mapping: introduce ARM_DMA_ERROR constant   Marek Szyprowski
• [PATCHv7 2/9] ARM: dma-mapping: use pr_* instread of printk   Marek Szyprowski
• [PATCHv7 3/9] ARM: dma-mapping: remove offset parameter to prepare for generic dma_ops   Marek Szyprowski
• [PATCHv7 4/9] ARM: dma-mapping: use asm-generic/dma-mapping-common.h   Marek Szyprowski
• [PATCHv7 5/9] ARM: dma-mapping: implement dma sg methods on top of any generic dma ops   Marek Szyprowski
• [PATCHv7 6/9] ARM: dma-mapping: move all dma bounce code to separate dma ops structure   Marek Szyprowski
• [PATCHv7 7/9] ARM: dma-mapping: remove redundant code and cleanup   Marek Szyprowski
• [PATCHv7 8/9] ARM: dma-mapping: use alloc, mmap, free from dma_ops   Marek Szyprowski
• [PATCHv7 9/9] ARM: dma-mapping: add support for IOMMU mapper   Marek Szyprowski
• [PATCH 0/6] mmc: omap_hsmmc: Clean up use/abuse of pdev->id   T Krishnamoorthy, Balaji
• [PATCH v2 3/4] arm/dts: OMAP4: Add mmc controller nodes and board data   T Krishnamoorthy, Balaji
• [PATCH v2 3/4] arm/dts: OMAP4: Add mmc controller nodes and board data   T Krishnamoorthy, Balaji
• [PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree   T Krishnamoorthy, Balaji
• [PATCH 1/4] ASoC: imx: add an explicit Kconfig option for imx-ssi driver   Timur Tabi
• [PATCH 4/4] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Timur Tabi
• [PATCH 4/4] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Timur Tabi
• [PATCH 6/6] ASoC: fsl: check property 'compatible' for the machine name   Timur Tabi
• [PATCH 6/6] ASoC: fsl: check property 'compatible' for the machine name   Timur Tabi
• [PATCH 4/4] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Timur Tabi
• [PATCH 4/4] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Timur Tabi
• [PATCH 4/4] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Timur Tabi
• [PATCH 0/6] ASoC: a few cleanups on sound/soc/fsl   Timur Tabi
• [PATCH 4/4] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Timur Tabi
• [PATCH 6/6] ASoC: fsl: check property 'compatible' for the machine name   Timur Tabi
• [PATCH 4/4] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX   Timur Tabi
• [PATCH 4/6] ASoC: fsl: create fsl_utils to accommodate the common functions   Timur Tabi
• [PATCH 1/6] ASoC: fsl: correct get_dma_channel parameter name   Timur Tabi
• [PATCH 0/6] ASoC: a few cleanups on sound/soc/fsl   Timur Tabi
• [PATCH 2/6] ASoC: fsl: align mpc8610_hpcd with p1022_ds on getting codec node   Timur Tabi
• [PATCH 3/6] ASoC: Remove unnecessary -codec from cs4270 driver name   Timur Tabi
• [PATCH 4/6] ASoC: fsl: create fsl_utils to accommodate the common functions   Timur Tabi
• [PATCH 5/6] ASoC: fsl: use platform_device_id table to match p1022_ds device   Timur Tabi
• [PATCH 5/6] ASoC: fsl: use platform_device_id table to match p1022_ds device   Timur Tabi
• [PATCH 6/6] ASoC: fsl: check property 'compatible' for the machine name   Timur Tabi
• [PATCH 4/6] ASoC: fsl: create fsl_utils to accommodate the common functions   Timur Tabi
• [PATCH] i.MX31: mxc-rnga: implement waiting for data in driver   Michael Thalmeier
• [PATCH] i.MX31: mxc-rnga: implement waiting for data in driver   Michael Thalmeier
• [PATCH] mmc: start removing enable / disable API   Sujit Reddy Thumma
• [PATCH 1/4] ASoC: imx: add an explicit Kconfig option for imx-ssi driver   Tabi Timur-B04825
• [PATCH 0/6] ASoC: a few cleanups on sound/soc/fsl   Tabi Timur-B04825
• [PATCH 6/6] ASoC: fsl: check property 'compatible' for the machine name   Tabi Timur-B04825
• [PATCH 6/6] ASoC: fsl: check property 'compatible' for the machine name   Tabi Timur-B04825
• [PATCH 4/6] ASoC: fsl: create fsl_utils to accommodate the common functions   Tabi Timur-B04825
• [PATCH 6/6] ASoC: fsl: check property 'compatible' for the machine name   Tabi Timur-B04825
• [PATCH 1/2] ARM: dma-mapping: its array of pointer   Tixy
• [PATCH 2/2] ARM: dma-mapping: fix leak in consistent_init   Tixy
• [PATCH 2/2] ARM: dma-mapping: fix leak in consistent_init   Tixy
• [V1 3/4] mfd: Add ability to wake the system for 88pm860x   Dmitry Torokhov
• [PATCH][RFC] tracing/rcu: Add trace_##name##__rcuidle() static tracepoint for inside rcu_idle_exit() sections   Josh Triplett
• [RFC PATCH v4 1/4] cpuidle: Add time keeping and irq enabling   Turquette, Mike
• [RFC PATCH v4 1/4] cpuidle: Add time keeping and irq enabling   Turquette, Mike
• [PATCH v2 03/11] ARM: EXYNOS: add clock part for EXYNOS5250 SoC   Turquette, Mike
• [PATCH v2 03/11] ARM: EXYNOS: add clock part for EXYNOS5250 SoC   Turquette, Mike
• [PATCH v5 1/9] cpuidle: Add commonly used functionality for consolidation   Turquette, Mike
• [PATCH v5 1/9] cpuidle: Add commonly used functionality for consolidation   Turquette, Mike
• [PATCH v5 1/9] cpuidle: Add commonly used functionality for consolidation   Turquette, Mike
• [PATCH v5 1/9] cpuidle: Add commonly used functionality for consolidation   Turquette, Mike
• [RFC 0/7] MFD: twl6040: Conversion to i2c driver   Peter Ujfalusi
• [RFC 1/7] MFD: twl-core: Detach twl6040 from the pmic mfd driver   Peter Ujfalusi
• [RFC 2/7] MFD: twl6040: Convert to i2c driver, and separate it from twl core   Peter Ujfalusi
• [RFC 5/7] OMAP: sdp4430: Add fixed regulator for twl6040 needs   Peter Ujfalusi
• [RFC 7/7] MFD: TWL6040: Add regulator support for VIO, V2V1 supplies   Peter Ujfalusi
• [RFC 7/7] MFD: TWL6040: Add regulator support for VIO, V2V1 supplies   Peter Ujfalusi
• [PATCH v2 0/7] MFD: twl6040: Conversion to i2c driver   Peter Ujfalusi
• [PATCH v2 1/7] MFD: twl-core: Detach twl6040 from the pmic mfd driver   Peter Ujfalusi
• [PATCH v2 2/7] MFD: twl6040: Convert to i2c driver, and separate it from twl core   Peter Ujfalusi
• [PATCH v2 3/7] ASoC: twl6040: Remove dependency on twl4030 from Kconfig   Peter Ujfalusi
• [PATCH v2 4/7] OMAP: 4430sdp: Correct fixed regulator device ID   Peter Ujfalusi
• [PATCH v2 5/7] OMAP: sdp4430: Add fixed regulator for twl6040 needs   Peter Ujfalusi
• [PATCH v2 6/7] OMAP: omap4panda: Add fixed regulator for twl6040 needs   Peter Ujfalusi
• [PATCH v2 7/7] MFD: TWL6040: Add regulator support for VIO, V2V1 supplies   Peter Ujfalusi
• [PATCH v2 7/7] MFD: TWL6040: Add regulator support for VIO, V2V1 supplies   Peter Ujfalusi
• [PATCH v2 2/7] MFD: twl6040: Convert to i2c driver, and separate it from twl core   Peter Ujfalusi
• [PATCH v2 2/7] MFD: twl6040: Convert to i2c driver, and separate it from twl core   Peter Ujfalusi
• [PATCH v2 0/7] MFD: twl6040: Conversion to i2c driver   Peter Ujfalusi
• [PATCH v3 0/3] MFD: twl6040: Conversion to i2c driver   Peter Ujfalusi
• [PATCH v3 1/3] MFD: twl-core: Detach twl6040 from the pmic mfd driver   Peter Ujfalusi
• [PATCH v3 2/3] MFD: twl6040: Convert to i2c driver, and separate it from twl core   Peter Ujfalusi
• [PATCH v3 3/3] ASoC: twl6040: Remove dependency on twl4030 from Kconfig   Peter Ujfalusi
• [PATCH 0/7] TWL6040: Regulator support   Peter Ujfalusi
• [PATCH 1/7] OMAP: 4430SDP: Correct fixed regulator device ID   Peter Ujfalusi
• [PATCH 2/7] regulator: twl-regulator: Add fixed LDO for V1V8, V2V1 supply   Peter Ujfalusi
• [PATCH 3/7] MFD: twl-core: regulator configuration for twl6030 V1V8, V2V1 SMPS   Peter Ujfalusi
• [PATCH 4/7] OMAP4: twl-common: Add twl6030 V1V8, V2V1 SMPS common configuration   Peter Ujfalusi
• [PATCH 5/7] OMAP: 4430SDP: Use common configuration for V1V8, V2V1 supplies   Peter Ujfalusi
• [PATCH 6/7] OMAP: omap4panda: Use common configuration for V1V8, V2V1 supplies   Peter Ujfalusi
• [PATCH 7/7] MFD: TWL6040: Add regulator support for VIO, V2V1 supplies   Peter Ujfalusi
• [RFC 00/11]O MAP/ASoC: Move and merge McBSP driver under ASoC   Peter Ujfalusi
• [RFC 00/11]O MAP/ASoC: Move and merge McBSP driver under ASoC   Peter Ujfalusi
• [RFC 04/11] ASoC: core - Add API call to register dai kcontrols.   Ujfalusi, Peter
• [RFC 00/11]O MAP/ASoC: Move and merge McBSP driver under ASoC   Ujfalusi, Peter
• [PATCH v3 0/3] MFD: twl6040: Conversion to i2c driver   Peter Ujfalusi
• [PATCH 0/7] TWL6040: Regulator support   Peter Ujfalusi
• [RFC 00/11]O MAP/ASoC: Move and merge McBSP driver under ASoC   Peter Ujfalusi
• [PATCH v3 0/3] MFD: twl6040: Conversion to i2c driver   Peter Ujfalusi
• [PATCH - linux-next] ARM: ptrace: Fix audit caused compile error   Peter Ujfalusi
• [PATCH v3 0/3] MFD: twl6040: Conversion to i2c driver   Peter Ujfalusi
• [PATCH v3 0/2] Device tree support for TWL regulators   Peter Ujfalusi
• [PATCH] ARM: ptrace: fix ptrace_read_user for !CONFIG_MMU platforms   Greg Ungerer
• [RFC v4 PATCH 0/4] dt: device tree support for TI EMIF driver   Aneesh V
• [RFC v4 PATCH 1/4] dt: device tree bindings for LPDDR2 memories   Aneesh V
• [RFC v4 PATCH 2/4] dt: emif: device tree bindings for TI's EMIF sdram controller   Aneesh V
• [RFC v4 PATCH 3/4] arm: dts: EMIF and LPDDR2 device tree data for OMAP4 boards   Aneesh V
• [RFC v4 PATCH 4/4] misc: emif: add device tree support to emif driver   Aneesh V
• [RFC PATCH 3/8] misc: emif: add register definitions for EMIF   Aneesh V
• [RFC v4 PATCH 0/4] dt: device tree support for TI EMIF driver   Aneesh V
• [PATCH v2 0/2] Add Qualcomm MSM ADM DMAEngine driver   Ravi Kumar V
• [PATCH v2 0/2] Add Qualcomm MSM ADM DMAEngine driver   Ravi Kumar V
• [PATCH v2 0/2] Add Qualcomm MSM ADM DMAEngine driver   Ravi Kumar V
• [PATCH v2 0/2] Add Qualcomm MSM ADM DMAEngine driver   Ravi Kumar V
• [PATCH] Add support for MSM GPIO IR receiver driver   Ravi Kumar V
• [PATCH] msm: rc: Add support for MSM GPIO based IR Receiver driver.   Ravi Kumar V
• [PATCH v2 0/1] Add support for GPIO IR receiver driver   Ravi Kumar V
• [PATCH v2 1/1] rc: Add support for GPIO based IR Receiver driver.   Ravi Kumar V
• [PATCH v2 1/1] rc: Add support for GPIO based IR Receiver driver.   Ravi Kumar V
• [PATCH v3 0/1] Add support for GPIO IR receiver driver   Ravi Kumar V
• [PATCH v3 1/1] rc: Add support for GPIO based IR Receiver driver.   Ravi Kumar V
• [PATCH v3 1/1] rc: Add support for GPIO based IR Receiver driver.   Ravi Kumar V
• [PATCH v7 2/2] video: backlight: support s6e8ax0 panel driver based on MIPI DSI   Tomi Valkeinen
• [PATCH 00/16] rmk's patch series for fixing OMAP   Tomi Valkeinen
• [PATCH 00/16] rmk's patch series for fixing OMAP   Tomi Valkeinen
• [PATCH 1/8] ARM: OMAP2+: Move DISPC L3 firewall to happen in omap_display_init()   Tomi Valkeinen
• [PATCH 8/8] ARM: OMAP2+: Limit omap_read/write usage to legacy USB drivers   Tomi Valkeinen
• Cache problems in user space - kernel space communication   Van Schaik, Carl
• [PATCH v9 01/25] gpio/omap: remove dependency on gpio_bank_count   Varadarajan, Charulatha
• [PATCH v9 01/25] gpio/omap: remove dependency on gpio_bank_count   Varadarajan, Charulatha
• Want to Get Suggestion for MX28 USB Submisson   Marek Vasut
• Want to Get Suggestion for MX28 USB Submisson   Marek Vasut
• [PATCH RESEND] FEC: Rename dev to ndev, fix compile error   Marek Vasut
• [PATCH RESEND] FEC: Rename dev to ndev, fix compile error   Marek Vasut
• [PATCH] EHCI: Fix clk_enable/clk_disable for ehci-mxc usb clock   Marek Vasut
• Want to Get Suggestion for MX28 USB Submisson   Marek Vasut
• [PATCH 2/3] ARM: PXA27x: save/restore PWER on suspend/resume   Marek Vasut
• [PATCH 3/3] ARM: PXA27x: Zipit Z2: disable wake on GPIO0   Marek Vasut
• [PATCH 2/3] ARM: PXA27x: save/restore PWER on suspend/resume   Marek Vasut
• [PATCH 3/3] ARM: PXA27x: Zipit Z2: disable wake on GPIO0   Marek Vasut
• [PATCH 2/3] ARM: PXA27x: save/restore PWER on suspend/resume   Marek Vasut
• [PATCHv3] ARM: extract out code patch function from kprobes   Rabin Vincent
• [PATCHv2 5/6] jump label: detect %c support for ARM   Rabin Vincent
• [PATCH] Optimize multi-CPU tlb flushing a little more   Rabin Vincent
• [PATCH] Optimize multi-CPU tlb flushing a little more   Rabin Vincent
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Rabin Vincent
• [PATCH] ARM: cache-v7: Disable preemption when reading CCSIDR   Rabin Vincent
• [PATCHv3] ARM: add jump label support   Rabin Vincent
• [PATCHv2 5/6] jump label: detect %c support for ARM   Rabin Vincent
• [PATCHv2 1/6] ARM: ftrace: remove useless memory checks   Rabin Vincent
• [PATCHv2 1/6] ARM: ftrace: remove useless memory checks   Rabin Vincent
• [PATCHv3] ARM: add jump label support   Rabin Vincent
• Question on ARM Cortex R4 support in Linux   Armando Visconti
• Question on ARM Cortex R4 support in Linux   Armando Visconti
• Question on ARM Cortex R4 support in Linux   Armando Visconti
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Anton Vorontsov
• [PATCH 1/4] sched: Introduce idle notifiers API   Anton Vorontsov
• [PATCH 2/4] sched: Wire up idle notifiers   Anton Vorontsov
• [PATCH 3/4] cpufreq: New 'interactive' governor   Anton Vorontsov
• [PATCH 4/4] ARM: Move leds idle start/stop calls to sched idle notifiers   Anton Vorontsov
• [PATCH 3/4] cpufreq: New 'interactive' governor   Anton Vorontsov
• [PATCH-WIP 07/13] xen/arm: receive xen events on arm   David Vrabel
• [PATCH] ARM: OMAP2+: GPMC: Export gpmc_enable_hwecc and gpmc_calculate_ecc   Bernhard Walle
• [PATCH] mtd: omap2: Release memory region in .remove function   Bernhard Walle
• [PATCH] ARM: ux500: ioremap differences for DB9540   Linus Walleij
• [PATCH] pinctrl: restore pin naming   Linus Walleij
• [PATCH] pinctrl: delete raw device pointers in pinmux maps   Linus Walleij
• [PATCH] pinctrl: delete raw device pointers in pinmux maps   Linus Walleij
• [PATCH v2] pinctrl: delete raw device pointers in pinmux maps   Linus Walleij
• [PATCH] pinctrl: pin configuration states   Linus Walleij
• [PATCH v2] pinctrl: pin configuration states   Linus Walleij
• [PATCH 3/4] ARM: tegra: Switch to new pinctrl driver   Linus Walleij
• cpu_relax in busy loops question   Linus Walleij
• [PATCH V2 1/4] pinctrl: add a driver for NVIDIA Tegra   Linus Walleij
• [PATCH] ARM: ux500: Add audio-regulators   Linus Walleij
• [PATCH V2 1/4] pinctrl: add a driver for NVIDIA Tegra   Linus Walleij
• [PATCH V2 1/4] pinctrl: add a driver for NVIDIA Tegra   Linus Walleij
• [PATCH V2 1/4] pinctrl: add a driver for NVIDIA Tegra   Linus Walleij
• [PATCH v2] pinctrl: pin configuration states   Linus Walleij
• [PATCH 2/2] pinctrl: Add simple pinmux driver using device tree data   Linus Walleij
• [PATCHv2 0/3] clocksource: add db8500 PRCMU timer   Linus Walleij
• An extremely simplified pinctrl bindings proposal   Linus Walleij
• An extremely simplified pinctrl bindings proposal   Linus Walleij
• [PATCH] ux500 : decouple/recouple gic from the PRCMU   Linus Walleij
• An extremely simplified pinctrl bindings proposal   Linus Walleij
• [PATCH 0/6] ux500: Export SoC information and some platform clean-up   Linus Walleij
• An extremely simplified pinctrl bindings proposal   Linus Walleij
• An extremely simplified pinctrl bindings proposal   Linus Walleij
• An extremely simplified pinctrl bindings proposal   Linus Walleij
• [PATCH 3/3] ARM: remove empty disable_fiq and arch_ret_to_user macros   Linus Walleij
• [PATCH v6 08/15] ARM: SoC: convert ux500 to SoC descriptor   Linus Walleij
• [PATCH 0/3] pinctrl: move the core per-device handlers to core   Linus Walleij
• [PATCH 1/3] pinctrl: break out a pinctrl consumer header   Linus Walleij
• [PATCH 2/3] pinctrl: move generic functions to the pinctrl_ namespace   Linus Walleij
• [PATCH 3/3] pinctrl: factor pin control handles over to the core   Linus Walleij
• [PATCH] pinctrl: changes hog mechanism to be self-referential   Linus Walleij
• [PATCH 2/3 v2] pinctrl: move generic functions to the pinctrl_ namespace   Linus Walleij
• [PATCH 0/3] pinctrl: move the core per-device handlers to core   Linus Walleij
• No clkdev vs smp_twd.c   Linus Walleij
• [PATCH][V3] ux500 : decouple/recouple gic from the PRCMU   Linus Walleij
• [PATCH 0/3] pinctrl: move the core per-device handlers to core   Linus Walleij
• [PATCH 0/6] ux500: Export SoC information and some platform clean-up   Linus Walleij
• Possible circular locking dependency (3.3-rc2)   Linus Walleij
• [PATCH] serial/sirf: fixup for changes to pin control   Linus Walleij
• [PATCH 0/3] pinctrl: move the core per-device handlers to core   Linus Walleij
• [PATCH 14/15] ARM: remove bunch of now unused mach/io.h files   Linus Walleij
• [PATCH] serial/sirf: fixup for changes to pin control   Linus Walleij
• [PATCH] ux500: Remove keyboard pin definition for snowball   Linus Walleij
• [PATCH v2] mach-u300: do away with MMC config files   Linus Walleij
• [GIT PULL] ux500 patches for v3.4   Linus Walleij
• [PATCH 1/2] Documentation/gpio.txt: Explain expected pinctrl interaction   Linus Walleij
• [PATCH 2/2] gpio: tegra: Delete tegra_gpio_enable/disable()   Linus Walleij
• [PATCH 1/2] Documentation/gpio.txt: Explain expected pinctrl interaction   Linus Walleij
• [PATCH 1/2] Documentation/gpio.txt: Explain expected pinctrl interaction   Linus Walleij
• [PATCH 1/2] Documentation/gpio.txt: Explain expected pinctrl interaction   Linus Walleij
• [PATCH] pinctrl: spawn U300 pinctrl from the COH901 GPIO   Linus Walleij
• [PATCH 1/2] Documentation/gpio.txt: Explain expected pinctrl interaction   Linus Walleij
• [PATCH] pinctrl: spawn U300 pinctrl from the COH901 GPIO   Linus Walleij
• [PATCH] pinctrl: make the pinmux-pins more helpful   Linus Walleij
• [PATCH v2] ARM: ux500: core U9540 support   Linus Walleij
• [GIT PULL] ux500 patches for v3.4   Linus Walleij
• [GIT PULL] ux500 patches for v3.4   Linus Walleij
• [GIT PULL] ux500 patches for v3.4 take 2   Linus Walleij
• [PATCH] ARM: integrator: convert to sparse irqs   Linus Walleij
• [GIT PULL] ux500 patches for v3.4   Linus Walleij
• [PATCH] ARM: integrator: convert to sparse irqs   Linus Walleij
• [GIT PULL] ux500 patches for v3.4 take 2   Linus Walleij
• [PATCH] ARM: integrator: convert to sparse irqs   Linus Walleij
• [PATCH] arch/arm/mach-ux500/board-mop500-u8500uib.c: included linux/gpio.h twice   Linus Walleij
• [PATCH] ARM/sp810: introduce API to change system mode   Linus Walleij
• [PATCH] ARM/sp810: introduce API to change system mode   Linus Walleij
• RFC: what do we do with system controllers?   Linus Walleij
• [PATCH] pinctrl: make the pinmux-pins more helpful   Linus Walleij
• [GIT PULL] ux500 patches for v3.4 take 2   Linus Walleij
• RFC: what do we do with system controllers?   Linus Walleij
• [PATCH 3/6] ux500: select MFD_SUPPORT when needed   Linus Walleij
• [PATCH 6/6] ARM: ux500: select I2C for U8500   Linus Walleij
• [PATCH] ARM: ux500: delete TPS6105X selection   Linus Walleij
• [PATCH 6/6] ARM: ux500: select I2C for U8500   Linus Walleij
• [PATCH] ARM: ux500: solve some Kconfig mess   Linus Walleij
• [PATCH] pinctrl: make the pinmux-pins more helpful   Linus Walleij
• [PATCH v2] pinctrl: make the pinmux-pins more helpful   Linus Walleij
• [PATCH] ARM: ux500: solve some Kconfig mess   Linus Walleij
• [PATCH 1/2] ARM: OMAP3: PM: remove superfluous calls to pwrdm_clear_all_prev_pwrst()   Paul Walmsley
• [PATCH 1/2] ARM: OMAP3: PM: remove superfluous calls to pwrdm_clear_all_prev_pwrst()   Paul Walmsley
• [PATCH 0/2] ARM: OMAP2+: PM: code consolidation for 3.4   Paul Walmsley
• [PATCH 1/2] ARM: OMAP2+: PM: share clkdms_setup() across OMAP2, 3, 4   Paul Walmsley
• [PATCH 2/2] ARM: OMAP2+: PM: share some suspend-related functions across OMAP2, 3, 4   Paul Walmsley
• [PATCH 1/2] ARM: OMAP3: PM: remove superfluous calls to pwrdm_clear_all_prev_pwrst()   Paul Walmsley
• [PATCH 0/2] ARM: OMAP2+: PM: code consolidation for 3.4   Paul Walmsley
• [PATCH 1/2] ARM: OMAP3: PM: remove superfluous calls to pwrdm_clear_all_prev_pwrst()   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• [PATCH 0/2] ARM: OMAP2+: PM: code consolidation for 3.4   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• omap-serial RX DMA polling?   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Paul Walmsley
• [PATCH 14/16] ARM: omap: fix wrapped error messages in omap_hwmod.c   Paul Walmsley
• [PATCH] ARM: OMAP2+: clock: cleanup CPUfreq leftovers   Paul Walmsley
• [PATCH 14/16] ARM: omap: fix wrapped error messages in omap_hwmod.c   Paul Walmsley
• [PATCH] ARM: OMAP2xxx: PM: fix OMAP2xxx-specific UART idle bug in v3.3   Paul Walmsley
• ARM: OMAP2xxx: PM: remove obsolete timer disable code in the suspend path   Paul Walmsley
• ARM: OMAP2xxx: PM: remove obsolete timer disable code in the suspend path   Paul Walmsley
• OMAP34xx   Paul Walmsley
• OMAP34xx   Paul Walmsley
• [PATCH v3] ARM: OMAP: clock: cleanup CPUfreq leftovers   Paul Walmsley
• [PATCH 2/3] tty: serial: OMAP: block idle while the UART is transferring data in PIO mode   Paul Walmsley
• [GIT PULL] OMAP PM EMU fix for v3.3   Paul Walmsley
• [GIT PULL] OMAP PM EMU fix for v3.3   Paul Walmsley
• [GIT PULL] OMAP PM EMU fix for v3.3   Paul Walmsley
• [PATCH v2 0/8] ARM: OMAP2+: hwmod/timer: first set of cleanups for 3.4   Paul Walmsley
• [PATCH v2 1/8] ARM: OMAP2+: hwmod: control all hardreset lines attached to a hwmod   Paul Walmsley
• [PATCH v2 2/8] ARM: OMAP4: hwmod data: remove pseudo-hwmods associated with hardreset lines   Paul Walmsley
• [PATCH v2 3/8] ARM: OMAP2+: hwmod: reorganize and document the setup process   Paul Walmsley
• [PATCH v2 4/8] ARM: OMAP2+: hwmod: revise hardreset behavior   Paul Walmsley
• [PATCH v2 5/8] ARM: OMAP2+: hwmod: ensure that SYSCONFIG bits are reprogrammed after a reset   Paul Walmsley
• [PATCH v2 6/8] ARM: OMAP2+: hwmod: provide a function to return the address space of the MPU RT   Paul Walmsley
• [PATCH v2 7/8] ARM: OMAP2+: hwmod: add omap_hwmod_get_resource_byname()   Paul Walmsley
• [PATCH v2 8/8] ARM: OMAP2+: timer: use a proper interface to get hwmod data   Paul Walmsley
• [PATCH] ARM: OMAP: hwmod: add softreset delay field and OMAP4 data   Paul Walmsley
• [PATCHv2 5/6] ARM: OMAP4: hwmod_data: Do not get DSP out of reset at boot time   Paul Walmsley
• [PATCHv2 2/6] ARM: OMAP4 PM: Add IO Daisychain support   Paul Walmsley
• [PATCH 0/9] ARM: OMAP2+: hwmod data: cleanup in preparation for link array removal   Paul Walmsley
• [PATCH 1/9] ARM: OMAP2/3: hwmod data: update old names   Paul Walmsley
• [PATCH 2/9] ARM: OMAP3: hwmod data: fix interfaces for the MMC hwmods   Paul Walmsley
• [PATCH 3/9] ARM: OMAP3: hwmod data: add DSS->L3 interconnect for 3430ES1   Paul Walmsley
• [PATCH 4/9] ARM: OMAP3: hwmod data: GPTIMER12 is attached to a separate interconnect   Paul Walmsley
• [PATCH 5/9] ARM: OMAP36xx: hwmod data: fix SmartReflex interface data   Paul Walmsley
• [PATCH 6/9] ARM: OMAP4: hwmod data: remove bandgap hwmod   Paul Walmsley
• [PATCH 7/9] ARM: OMAP4: hwmod data: add OCP_USER_DSP; mark omap44xx_dsp__iva appropriately   Paul Walmsley
• [PATCH 8/9] ARM: OMAP4: hwmod data: uncomment some "excluded" hwmods   Paul Walmsley
• [PATCH 9/9] ARM: OMAP2+: hwmod: extend OCP_* register offsets from 16 to 32 bits   Paul Walmsley
• [PATCH 2/3] tty: serial: OMAP: block idle while the UART is transferring data in PIO mode   Paul Walmsley
• [PATCHv2 5/6] ARM: OMAP4: hwmod_data: Do not get DSP out of reset at boot time   Paul Walmsley
• [PATCHv3 2/4] ARM: OMAP4: prm: fix interrupt register offsets   Paul Walmsley
• [PATCHv3 4/6] ARM: OMAP3 PM: Enable IO Wake up   Paul Walmsley
• [PATCH-V2 2/2] arm:omap:am33xx: Add power domain data   Paul Walmsley
• [PATCH-V2 2/2] arm:omap:am33xx: Add power domain data   Paul Walmsley
• [PATCH] ARM: OMAP2+: powerdomain: unwrap and simplify logging strings   Paul Walmsley
• [PATCH v3] mtd/gpmi : add BBT support to gpmi nand driver   Ricard Wanderlof
• In many cases softlockup can not be reported after disabling IRQ for long time   Cong Wang
• [PATCH 03/60] arm: remove the second argument of k[un]map_atomic()   Cong Wang
• [PATCH 59/60] highmem: kill all __kmap_atomic() [swarren at nvidia.com: highmem: Fix ARM build break due to __kmap_atomic rename]   Cong Wang
• [PATCH] pinctrl: restore pin naming   Stephen Warren
• [PATCH] pinctrl: delete raw device pointers in pinmux maps   Stephen Warren
• [PATCH V2 2/4] ARM: tegra: Select PINCTRL Kconfig variables   Stephen Warren
• [PATCH V2 4/4] ARM: tegra: Remove pre-pinctrl pinmux driver   Stephen Warren
• [PATCH V2 1/2] ARM: tegra: Add pinmux board file for Cardhu   Stephen Warren
• [PATCH V2 2/2] ARM: dt: Add SD controller configuration to Tegra Cardhu   Stephen Warren
• [PATCH v2] pinctrl: delete raw device pointers in pinmux maps   Stephen Warren
• [PATCH v1 3/8] ARM: tegra: rework Tegra secondary CPU core bringup   Stephen Warren
• [PATCH v2 8/8] ARM: tegra: support for secondary cores on Tegra30   Stephen Warren
• Pinmux bindings proposal V2   Stephen Warren
• [PATCH] pinctrl: pin configuration states   Stephen Warren
• [PATCH] ARM: dt: Explicitly configure all serial ports on Tegra Cardhu   Stephen Warren
• [PATCH V2 1/4] pinctrl: add a driver for NVIDIA Tegra   Stephen Warren
• [PATCH 0/3] arm: tegra: dts: USB Updates for Tegra legacy mode / OTG   Stephen Warren
• [PATCH V2 1/4] i2c: tegra: Add __devinit/exit to probe/remove   Stephen Warren
• An extremely simplified pinctrl bindings proposal   Stephen Warren
• An extremely simplified pinctrl bindings proposal   Stephen Warren
• An extremely simplified pinctrl bindings proposal   Stephen Warren
• [PATCH] ARM: tegra: Demote EMC clock inconsistency BUG to WARN   Stephen Warren
• An extremely simplified pinctrl bindings proposal   Stephen Warren
• An extremely simplified pinctrl bindings proposal   Stephen Warren
• [PATCH] pinctrl: changes hog mechanism to be self-referential   Stephen Warren
• [PATCH 0/3] pinctrl: move the core per-device handlers to core   Stephen Warren
• [PATCH 0/3] pinctrl: move the core per-device handlers to core   Stephen Warren
• Pinmux bindings proposal V2   Stephen Warren
• [PATCH 0/3] pinctrl: move the core per-device handlers to core   Stephen Warren
• [PATCH] Optimize multi-CPU tlb flushing a little more   Stephen Warren
• [PATCH] ARM: tegra: select required CPU and L2 errata options   Stephen Warren
• [PATCH] Optimize multi-CPU tlb flushing a little more   Stephen Warren
• [PATCH] Optimize multi-CPU tlb flushing a little more   Stephen Warren
• [PATCH] Optimize multi-CPU tlb flushing a little more   Stephen Warren
• [PATCH] Optimize multi-CPU tlb flushing a little more   Stephen Warren
• [PATCH v3 00/10] Add tegra30 support for secondary cores   Stephen Warren
• [PATCH] serial/sirf: fixup for changes to pin control   Stephen Warren
• [PATCH 1/2] Documentation/gpio.txt: Explain expected pinctrl interaction   Stephen Warren
• [PATCH 2/2] gpio: tegra: Delete tegra_gpio_enable/disable()   Stephen Warren
• [PATCH] pinctrl: spawn U300 pinctrl from the COH901 GPIO   Stephen Warren
• [PATCH 1/2] Documentation/gpio.txt: Explain expected pinctrl interaction   Stephen Warren
• [PATCH 2/2] gpio: tegra: Delete tegra_gpio_enable/disable()   Stephen Warren
• [PATCH 1/2] Documentation/gpio.txt: Explain expected pinctrl interaction   Stephen Warren
• [PATCH 00/15] mach/io.h cleanup and removal   Stephen Warren
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Stephen Warren
• [PATCH 1/2] Documentation/gpio.txt: Explain expected pinctrl interaction   Stephen Warren
• [PATCH] ARM: tegra: Avoid compiling cpuidle code when not configured   Stephen Warren
• [PATCH] ARM: tegra: Enable CPUIdle on Tegra20   Stephen Warren
• [PATCH] pinctrl: make the pinmux-pins more helpful   Stephen Warren
• status = "okay" vs. "disabled" in soc.dtsi or board.dts   Stephen Warren
• [PATCH V2 1/2] ARM: tegra: Add pinmux board file for Cardhu   Stephen Warren
• What's in tegra.git for 3.4   Stephen Warren
• [PATCH] ARM: boot/compressed/misc.s: Include <linux/bug.h> to fix build break   Stephen Warren
• [PATCH] ARM: boot/compressed/misc.s: Include <linux/bug.h> to fix build break   Stephen Warren
• [PATCH] ARM: tegra: uncompress.h: Don't depend on kernel headers   Stephen Warren
• [PATCH] ARM: tegra: match SoC name not board name in DT board files   Stephen Warren
• [PATCH] ARM: dt: Add ARM PMU to tegra*.dtsi   Stephen Warren
• [PATCH v3 04/10] arm/tegra: Fix PWM clock programming   Stephen Warren
• [PATCH v3 06/10] pwm: Add NVIDIA Tegra SoC support   Stephen Warren
• [PATCH v3 07/10] arm/tegra: Add PWFM controller device tree probing   Stephen Warren
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Stephen Warren
• [PATCH 2/2] ARM: tegra: Add zreladdr etc to Makefile.boot for Tegra30   Stephen Warren
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Stephen Warren
• [PATCH] pinctrl: make the pinmux-pins more helpful   Stephen Warren
• [PATCH v2] pinctrl: make the pinmux-pins more helpful   Stephen Warren
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Stephen Warren
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Stephen Warren
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Stephen Warren
• [RFC PATCH] of: DMA helpers: manage generic requests specification   Stephen Warren
• [PATCH 1/2] ARM: Add Kconfig option to use mkimage -T kernel_noload   Stephen Warren
• [PATCH v3 00/10] Add tegra30 support for secondary cores   Stephen Warren
• [PATCH v3] mtd/gpmi : add BBT support to gpmi nand driver   Lothar Waßmann
• [PATCH v3] mtd/gpmi : add BBT support to gpmi nand driver   Lothar Waßmann
• [BUG] genirq: Race condition in ONESHOT IRQ handler disabling IRQ forever   Lothar Waßmann
• [BUG] genirq: Race condition in ONESHOT IRQ handler disabling IRQ forever   Lothar Waßmann
• [PATCH] genirq: Fix race condition in ONESHOT irq handler   Lothar Waßmann
• [PATCH] genirq: Fix race condition in ONESHOT irq handler   Lothar Waßmann
• [PATCH] genirq: Fix race condition in ONESHOT irq handler   Lothar Waßmann
• [PATCH] pinctrl: changes hog mechanism to be self-referential   Lothar Waßmann
• Possible circular locking dependency (3.3-rc2)   Thomas Weber
• [PATCH][RFC] tracing/rcu: Add trace_##name##__rcuidle() static tracepoint for inside rcu_idle_exit() sections   Frederic Weisbecker
• [PATCH v3 1/7] ARM: LPC32xx: Added lpc32xx_defconfig   Kevin Wells
• [PATCH] ARM: LPC32xx: ADC support   Kevin Wells
• [PATCH v2 2/2] GPIO: LPC32xx: Add output reading to GPO P3   Kevin Wells
• [PATCH v2 5/6] ARM: LPC32xx: serial.c: HW bug workaround   Kevin Wells
• [PATCH v2 0/6] ARM: LPC32xx: Patch set with further fixes for LPC32xx   Kevin Wells
• [PATCH v3] lpc32xx: Added ethernet driver   Kevin Wells
• [PATCH v3] ARM: LPC32xx: Ethernet support   Kevin Wells
• [PATCH] ep93xx: fix build of vision_ep93xx.c   Mika Westerberg
• [PATCHv6 7/7] ARM: dma-mapping: add support for IOMMU mapper   Konrad Rzeszutek Wilk
• [PATCHv6 2/7] ARM: dma-mapping: use asm-generic/dma-mapping-common.h   Konrad Rzeszutek Wilk
• [PATCHv6 3/7] ARM: dma-mapping: implement dma sg methods on top of any generic dma ops   Konrad Rzeszutek Wilk
• [PATCH v3 3/3] arm:davinci: move NAND and NOR devices as aemif MFD slaves   Michael Williamson
• [PATCH 5/6 V2] atmel/nand: add DT support   David Woodhouse
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Woodruff, Richard
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Woodruff, Richard
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Woodruff, Richard
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Woodruff, Richard
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Woodruff, Richard
• patch "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA" added to tty tree   Woodruff, Richard
• [PATCH] ixp4xx: clockevent set_next_event fix   Michał Wróbel
• [PATCH RESEND] ixp4xx: clockevent set_next_event fix   Michał Wróbel
• [PATCH RESEND] ixp4xx: clockevent set_next_event fix   Michał Wróbel
• [PATCH RESEND] ixp4xx: clockevent set_next_event fix (TESTERS NEEDED)   Michał Wróbel
• [PATCH v2 1/2] PM / Domains: Add OF support   Rafael J. Wysocki
• [PATCH RFC 2/2] mtd : Make the mtd_suspend return 0 if the suspend is not implemented   Rafael J. Wysocki
• [PATCH RFC 2/2] mtd : Make the mtd_suspend return 0 if the suspend is not implemented   Rafael J. Wysocki
• [GIT PULL] Samsung EXYNOS pm domains for devel   Rafael J. Wysocki
• [GIT PULL] Samsung EXYNOS pm domains for devel   Rafael J. Wysocki
• [PATCH V3] MTD: atmel_nand: Update driver to support Programmable HW ECC controller   Xu, Hong
• [PATCH] MTD: atmel_nand: Update driver to support Programmable HW ECC controller   Hong Xu
• [PATCH] MTD: atmel_nand: Update driver to support Programmable HW ECC controller   Xu, Hong
• [PATCH] MTD: atmel_nand: Update driver to support Programmable HW ECC controller   Xu, Hong
• [PATCH 1/2] ARM: dma-mapping: its array of pointer   Ajeet Yadav
• [PATCH 2/2] ARM: dma-mapping: fix leak in consistent_init   Ajeet Yadav
• [PATCH 2/2] ARM: dma-mapping: fix leak in consistent_init   Ajeet Yadav
• [PATCH 2/2] ARM: dma-mapping: fix leak in consistent_init   Ajeet Yadav
• [PATCH 3/3] ARM: dma-mapping: fix array out of bound access   Ajeet Yadav
• [PATCH 1/2] ARM: dma-mapping: its array of pointer   Ajeet Yadav
• [PATCH] ARM: dma-mapping: Fix the type used for consistent_pte size calculation   Ajeet Yadav
• [PATCH 3/3] ARM: dma-mapping: fix array out of bound access in __dma_*_remap   Ajeet Yadav
• [PATCH 3/3] ARM: dma-mapping: fix array out of bound access   Ajeet Yadav
• [PATCH 13/13] DMA:update defconfig for mmp2   Zhao Ye
• [PATCH 00/13] Enable DMA engine for mmp2 and mmp3   Zhao Ye
• [PATCH] pxa/hx4700: Avoid unbalanced irq wakeup enables/disables   Philipp Zabel
• [PATCH] pxa/hx4700: Fix basic suspend/resume   Philipp Zabel
• [PATCH REPOST] pxa/hx4700: Add ASIC3 LED support   Philipp Zabel
• [PATCH] pxa/hx4700: Set DS1WM clock_rate   Philipp Zabel
• [PATCH v6 2/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Philipp Zabel
• [PATCH v3] pxa/hx4700: Fix PXA_GPIO_IRQ_BASE/IRQ_NUM values   Philipp Zabel
• [PATCH] MAINTAINERS: update maintainer entry for pxa/hx4700   Philipp Zabel
• [PATCH] pxa/hx4700: Avoid unbalanced irq wakeup enables/disables   Philipp Zabel
• [BUG] genirq: Race condition in ONESHOT IRQ handler disabling IRQ forever   Yong Zhang
• [BUG] genirq: Race condition in ONESHOT IRQ handler disabling IRQ forever   Yong Zhang
• [PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM   Yong Zhang
• [PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM   Yong Zhang
• linux-next: manual merge of the akpm tree with the arm-soc tree   Yong Zhang
• [PATCH v2 0/9] imx patches when I enable imx6q sabrelite audio   Richard Zhao
• [PATCH v2 1/9] ARM: mxc: make imx_dma_is_general_purpose more generic for sdma   Richard Zhao
• [PATCH v2 2/9] ARM: imx6q: add cko1 clock   Richard Zhao
• [PATCH v2 3/9] ARM: dts: imx6q-sabrelite: add 2p5v and 3p3v regulators   Richard Zhao
• [PATCH v2 4/9] ARM: dts: imx6q-sabrelite: add sgtl5000 audio codec   Richard Zhao
• [PATCH v2 5/9] ARM: mxc: convert audmux-v2 to a platform driver   Richard Zhao
• [PATCH v2 6/9] ARM: mx31ads: add audmux device   Richard Zhao
• [PATCH v2 7/9] ARM: mxc: move audmux-v2 to sound/soc/imx   Richard Zhao
• [PATCH v2 8/9] ASoC: imx: add dt support for audmux-v2   Richard Zhao
• [PATCH v2 9/9] ARM: imx6q-sabrelite: add audmux support   Richard Zhao
• [PATCH v2 9/9] ARM: imx6q-sabrelite: add audmux support   Richard Zhao
• [PATCH v2 6/9] ARM: mx31ads: add audmux device   Richard Zhao
• [PATCH v2 7/9] ARM: mxc: move audmux-v2 to sound/soc/imx   Richard Zhao
• [PATCH v2 4/9] ARM: dts: imx6q-sabrelite: add sgtl5000 audio codec   Richard Zhao
• [PATCH v2 6/9] ARM: mx31ads: add audmux device   Richard Zhao
• [PATCH v2 8/9] ASoC: imx: add dt support for audmux-v2   Richard Zhao
• [PATCH v2 4/9] ARM: dts: imx6q-sabrelite: add sgtl5000 audio codec   Richard Zhao
• [PATCH v2 2/2] ARM: mx3: Let mx31 and mx35 enter in LPM mode in WFI   Richard Zhao
• [PATCH v2 6/9] ARM: mx31ads: add audmux device   Richard Zhao
• [PATCH v2 6/9] ARM: mx31ads: add audmux device   Richard Zhao
• An extremely simplified pinctrl bindings proposal   Richard Zhao
• [PATCH v2 6/9] ARM: mx31ads: add audmux device   Richard Zhao
• [PATCH v2 6/9] ARM: mx31ads: add audmux device   Richard Zhao
• [PATCH v2 0/9] imx patches when I enable imx6q sabrelite audio   Richard Zhao
• [PATCH 0/2] change lpj in arm smp common code   Richard Zhao
• [PATCH 1/2] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Richard Zhao
• [PATCH 2/2] cpufreq: OMAP: remove loops_per_jiffy recalculate for smp   Richard Zhao
• [BUG] Spitz charger broken (and other sharpsl warnings)?   Haojian Zhuang
• [PATCH 02/11] Revert "ARM: pxa: add dummy clock for sa1100-rtc"   Haojian Zhuang
• [PATCH] arch/arm/mach-pxa/pxa27x.c: included linux/gpio.h twice   Haojian Zhuang
• [PATCH] arch/arm/mach-pxa/: included linux/gpio.h twice   Haojian Zhuang
• [PATCH] arch/arm/mach-mmp/: some files include some headers twice   Haojian Zhuang
• [GIT PULL] [v3.3] fixes for arch-pxa in arm   Haojian Zhuang
• [PATCH 0/7] share sa1100 rtc driver to arch-mmp   Haojian Zhuang
• [PATCH 1/7] rtc: sa1100: remove periodic code   Haojian Zhuang
• [PATCH 2/7] rtc: sa1100: remove verification code of alarm   Haojian Zhuang
• [PATCH 3/7] rtc: sa1100: use ioremap to map registers   Haojian Zhuang
• [PATCH 4/7] ARM: sa1100: clean up of the clock support   Haojian Zhuang
• [PATCH 5/7] ARM: pxa: add rtc dummy clock   Haojian Zhuang
• [PATCH 6/7] rtc: sa1100: enable clk support   Haojian Zhuang
• [PATCH 7/7] ARM: mmp: enable rtc   Haojian Zhuang
• [PATCH 6/7] rtc: sa1100: enable clk support   Haojian Zhuang
• [PATCH 0/7] share sa1100 rtc driver to arch-mmp   Haojian Zhuang
• [PATCH 0/7] share sa1100 rtc driver to arch-mmp   Haojian Zhuang
• [PATCH 0/7] share sa1100 rtc driver to arch-mmp   Haojian Zhuang
• [PATCH 3/7] rtc: sa1100: use ioremap to map registers   Haojian Zhuang
• [PATCH v2 3/7] rtc: sa1100: use ioremap to map registers   Haojian Zhuang
• [PATCH 0/7] share sa1100 rtc driver to arch-mmp   Haojian Zhuang
• [PATCH 0/7] share sa1100 rtc driver to arch-mmp   Haojian Zhuang
• [PATCH 6/7] rtc: sa1100: enable clk support   Haojian Zhuang
• [PATCH 0/7] share sa1100 rtc driver to arch-mmp   Haojian Zhuang
• [PATCH v3 0/7] share rtc-sa1100 driver to arch-mmp   Haojian Zhuang
• [PATCH v3 1/7] rtc: sa1100: remove periodic code   Haojian Zhuang
• [PATCH v3 2/7] rtc: sa1100: remove verification code of alarm   Haojian Zhuang
• [PATCH v3 3/7] rtc: sa1100: declare irq in resource   Haojian Zhuang
• [PATCH v3 4/7] ARM: sa1100: clean up clock support   Haojian Zhuang
• [PATCH v3 5/7] ARM: pxa: add rtc dummy clock   Haojian Zhuang
• [PATCH v3 6/7] rtc: sa1100: enable clk support   Haojian Zhuang
• [PATCH v3 7/7] ARM: mmp: enable rtc in pxa910   Haojian Zhuang
• [PATCH v3 5/7] ARM: pxa: add rtc dummy clock   Haojian Zhuang
• [PATCH v4 4/7] ARM: sa1100: clean up clock support   Haojian Zhuang
• [PATCH] pxa/hx4700: Correct StrataFlash block size discovery   Haojian Zhuang
• [PATCH v2] pxa/hx4700: Correct StrataFlash block size discovery   Haojian Zhuang
• [PATCH v3] pxa/hx4700: Fix PXA_GPIO_IRQ_BASE/IRQ_NUM values   Haojian Zhuang
• [PATCH REPOST] pxa/hx4700: Add ASIC3 LED support   Haojian Zhuang
• [PATCH] pxa/hx4700: Avoid unbalanced irq wakeup enables/disables   Haojian Zhuang
• [PATCH v3 REPOST] pxa/hx4700: Fix PXA_GPIO_IRQ_BASE/IRQ_NUM values   Haojian Zhuang
• [PATCH] pxa/hx4700: Fix basic suspend/resume   Haojian Zhuang
• [PATCH] pxa/hx4700: Fix basic suspend/resume   Haojian Zhuang
• [GIT PULL] [for 3.4] git pull request for arch-pxa   Haojian Zhuang
• [PATCH] pxa/hx4700: Avoid unbalanced irq wakeup enables/disables   Haojian Zhuang
• [PATCH] pxa/hx4700: Fix basic suspend/resume   Haojian Zhuang
• [PATCH 02/11] Revert "ARM: pxa: add dummy clock for sa1100-rtc"   Haojian Zhuang
• [GIT PULL] [for 3.4] git pull request for arch-pxa   Haojian Zhuang
• [GIT PULL] [for 3.4] git pull request for arch-pxa   Haojian Zhuang
• [GIT PULL][v3.4] pull request of rtc-sa1100 branch in pxa git tree   Haojian Zhuang
• [GIT PULL][v3.4] request pull cleanup-3.4 branch in pxa git tree   Haojian Zhuang
• [GIT PULL][v3.4] pull request of board-specific branch in pxa git tree   Haojian Zhuang
• [PATCH 00/13] Enable DMA engine for mmp2 and mmp3   Haojian Zhuang
• linux-next: manual merge of the akpm tree with the arm-soc tree   Haojian Zhuang
• In many cases softlockup can not be reported after disabling IRQ for long time   Don Zickus
• In many cases softlockup can not be reported after disabling IRQ for long time   Don Zickus
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Peter Zijlstra
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Peter Zijlstra
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Peter Zijlstra
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Peter Zijlstra
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Peter Zijlstra
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Peter Zijlstra
• oprofile and ARM A9 hardware counter   Peter Zijlstra
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Peter Zijlstra
• [PATCH v3 0/6] ARM: Remove the __ARCH_WANT_INTERRUPTS_ON_CTXSW definition   Peter Zijlstra
• oprofile and ARM A9 hardware counter   Peter Zijlstra
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Peter Zijlstra
• [PATCH RFC 0/4] Scheduler idle notifiers and users   Peter Zijlstra
• [PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM   Peter Zijlstra
• [PATCH v3 1/6] sched: Introduce the finish_arch_post_lock_switch() scheduler hook   Peter Zijlstra
• [PULL] Runtime registration for local timers   Marc Zyngier
• [PATCH v2 0/4] A7/A15 architected timer support   Marc Zyngier
• [PATCH v2 1/4] ARM: local timers: Add A15 architected timer support   Marc Zyngier
• [PATCH v2 2/4] ARM: architected timers: Add A15 specific sched_clock implementation   Marc Zyngier
• [PATCH v2 3/4] ARM: architected timers: add DT support   Marc Zyngier
• [PATCH v2 4/4] ARM: architected timers: add support for UP timer   Marc Zyngier
• [PATCH] ARM: Fix proc_info table alignment   Marc Zyngier
• [PULL] Convert remaining platforms to common sched_clock()   Marc Zyngier
• [PATCH v6 00/15] Per SoC descriptor   Marc Zyngier
• [PATCH v6 01/15] ARM: SoC: Introduce per SoC descriptor   Marc Zyngier
• [PATCH v6 02/15] ARM: SoC: Add per SoC SMP and CPU hotplug operations   Marc Zyngier
• [PATCH v6 03/15] ARM: SoC: convert VExpress/RealView to SoC descriptor   Marc Zyngier
• [PATCH v6 04/15] ARM: SoC: convert OMAP4 to SoC descriptor   Marc Zyngier
• [PATCH v6 05/15] ARM: SoC: convert Tegra to SoC descriptor   Marc Zyngier
• [PATCH v6 06/15] ARM: SoC: convert Exynos4 to SoC descriptor   Marc Zyngier
• [PATCH v6 07/15] ARM: SoC: convert MSM SMP to SoC descriptor   Marc Zyngier
• [PATCH v6 08/15] ARM: SoC: convert ux500 to SoC descriptor   Marc Zyngier
• [PATCH v6 09/15] ARM: SoC: convert shmobile SMP to SoC descriptor   Marc Zyngier
• [PATCH v6 10/15] ARM: SoC: convert highbank to SoC descriptor   Marc Zyngier
• [PATCH v6 11/15] ARM: SoC: convert imx6q to SoC descriptor   Marc Zyngier
• [PATCH v6 12/15] ARM: smp: Make SoC descriptor mandatory for SMP platforms   Marc Zyngier
• [PATCH v6 13/15] ARM: hotplug: Introduce dummy_cpu_kill   Marc Zyngier
• [PATCH v6 14/15] ARM: hotplug: Introduce dummy_cpu_disable   Marc Zyngier
• [PATCH v6 15/15] ARM: hotplug: add cpu_lowpower as an alternative to cpu_die   Marc Zyngier
• [PATCH v6 00/15] Per SoC descriptor   Marc Zyngier
• [PATCH v6 07/15] ARM: SoC: convert MSM SMP to SoC descriptor   Marc Zyngier
• [PATCH v6 13/15] ARM: hotplug: Introduce dummy_cpu_kill   Marc Zyngier
• [PATCH v6 02/15] ARM: SoC: Add per SoC SMP and CPU hotplug operations   Marc Zyngier
• [PATCH v2 4/4] ARM: architected timers: add support for UP timer   Marc Zyngier
• SMP local timers and their CPUfreq notifiers setup on OMAP3   Marc Zyngier
• SMP local timers and their CPUfreq notifiers setup on OMAP3   Marc Zyngier
• SMP local timers and their CPUfreq notifiers setup on OMAP3   Marc Zyngier
• [PATCH] msm: timer: Support sched_clock()   Marc Zyngier
• [PATCH] msm: timer: Support sched_clock()   Marc Zyngier
• [PATCH] msm: timer: Support sched_clock()   Marc Zyngier
• [GIT PULL] One more sched_clock() patch   Marc Zyngier
• I2C device suspend ordering w.r.t to other SOC drivers   muni anda
• [PATCH] ARM: LPC32xx: Support for OHCI HCD   stigge at antcom.de
• [PATCH] ARM: LPC32xx: ADC support   stigge at antcom.de
• [PATCH v3 1/7] ARM: LPC32xx: Added lpc32xx_defconfig   stigge at antcom.de
• [PATCH v3 2/7] ARM: LPC32XX: Remove broken non-static declaration   stigge at antcom.de
• [PATCH v3 3/7] ARM: LPC32xx: clock.c: Missing header file   stigge at antcom.de
• [PATCH v3 4/7] ARM: LPC32xx: clock.c: jiffies wrapping   stigge at antcom.de
• [PATCH v3 5/7] ARM: LPC32xx: clock.c: Clock registration fixes   stigge at antcom.de
• [PATCH v3 6/7] ARM: LPC32xx: clock.c: warning fix   stigge at antcom.de
• [PATCH v3 7/7] ARM: LPC32xx: clock.c: Fix mutex lock issues   stigge at antcom.de
• [PATCH] mmc: atmel-mci: save and restore sdioirq when soft reset is performed   ludovic.desroches at atmel.com
• [PATCH] mmc: atmel-mci: save and restore sdioirq when soft reset is performed   ludovic.desroches at atmel.com
• [PATCH 1/2] mmc: atmel-mci: don't use dma features when dma is present but there is no chan available   ludovic.desroches at atmel.com
• [PATCH 2/2] mmc: atmel-mci: fix typo   ludovic.desroches at atmel.com
• [PATCH 4/7] Store huge page linux pte in mm_struct   carson bill
• [PATCH 1/7] Add various hugetlb arm high level hooks   carson bill
• [PATCH 2/7] Add various hugetlb page table fix   carson bill
• [PATCH 2/7] Add various hugetlb page table fix   carson bill
• [PATCH 2/7] Add various hugetlb page table fix   carson bill
• [PATCH 4/7] Store huge page linux pte in mm_struct   bill4carson
• [RFC] ARM hugetlb support   bill4carson
• [PATCH] Skip unnecessary pte makeup when clearing it.   bill4carson
• [PATCH] Skip unnecessary pte makeup when clearing it.   bill4carson
• [PATCH] Skip unnecessary pte makeup when clearing it.   bill4carson
• [PATCH 4/7] Store huge page linux pte in mm_struct   bill4carson
• [PATCH 2/7] Add various hugetlb page table fix   bill4carson
• [PATCH 1/7] Add various hugetlb arm high level hooks   bill4carson
• [PATCH] hotplug: eliminate warning "Unknown IPI message 0x1"   bill4carson
• [PATCH 6/7] Add hugetlb Kconfig option   bill4carson
• [PATCH 1/7] Add various hugetlb arm high level hooks   bill4carson
• [PATCH 1/7] Add various hugetlb arm high level hooks   bill4carson
• [PATCH 1/7] Add various hugetlb arm high level hooks   bill4carson
• Claro Corporativo   info at clarotelmex.com
• [GIT PULL] OMAP PM EMU fix for v3.3   Madhusudhan.Gowda at elektrobit.com
• [GIT PULL] OMAP PM EMU fix for v3.3   Madhusudhan.Gowda at elektrobit.com
• [GIT PULL] OMAP PM EMU fix for v3.3   Madhusudhan.Gowda at elektrobit.com
• [GIT PULL] OMAP PM EMU fix for v3.3   Madhusudhan.Gowda at elektrobit.com
• oprofile and ARM A9 hardware counter   stephane eranian
• oprofile and ARM A9 hardware counter   stephane eranian
• [MX25][MMC] mmc esdhc failure in 3.3-rc5   joancarles at fqingenieria.es
• Question on ARM Cortex R4 support in Linux   shiraz hashim
• Question on ARM Cortex R4 support in Linux   shiraz hashim
• [2.6.39.3] [MX25] oops in driver_register for ADC touchscreen support (imx_adc_ts)   joancarles
• [2.6.39.3] [MX25] oops in driver_register for ADC touchscreen support (imx_adc_ts)   joancarles
• [2.6.39.3] [MX25] oops in driver_register for ADC touchscreen support (imx_adc_ts)   joancarles
• [2.6.39.3] [MX25] oops in driver_register for ADC touchscreen support (imx_adc_ts)   joancarles
• [2.6.39.3] [MX25] oops in driver_register for ADC touchscreen support (imx_adc_ts)   joancarles
• Query: When will drv->poweroff() called   viresh kumar
• Query: Multiple Mappings to Mem and ARMV6+   viresh kumar
• Query: Multiple Mappings to Mem and ARMV6+   viresh kumar
• Query: Multiple Mappings to Mem and ARMV6+   viresh kumar
• [PATCH 1/6] arm: U8500 depends on MMU   mathieu.poirier at linaro.org
• [PATCH 2/6] ARM: ux500: Add board autoselection   mathieu.poirier at linaro.org
• [PATCH 3/6] ux500: select MFD_SUPPORT when needed   mathieu.poirier at linaro.org
• [PATCH 4/6] ARM: ux500: select L2X0 cache on ux500   mathieu.poirier at linaro.org
• [PATCH 5/6] ARM: ux500: select CPU_FREQ_TABLE where needed   mathieu.poirier at linaro.org
• [PATCH 6/6] ARM: ux500: select I2C for U8500   mathieu.poirier at linaro.org
• [patch 1/2] arch/arm/mach-ux500/mbox-db5500.c: world-writable sysfs fifo file   akpm at linux-foundation.org
• [patch 2/2] arm, exec: remove redundant set_fs(USER_DS)   akpm at linux-foundation.org
• [Linaro-mm-sig] [PATCH 11/15] mm: trigger page reclaim in alloc_contig_range() to stabilize watermarks   sandeep patil
• [Linaro-mm-sig] [PATCH 11/15] mm: trigger page reclaim in alloc_contig_range() to stabilize watermarks   sandeep patil
• HR timer support   shabbir
• [PATCH 1/3] ARM: EXYNOS: SATA clock config update   srikanth
• [PATCH 2/3] ARM: EXYNOS: Added SATA registers base address.   srikanth
• [PATCH 3/3] ARM: EXYNOS: SATA Physical layer driver code.   srikanth
• ARM: __enabled_CONFIG_NUMA undeclared   richard -rw- weinberger
• [PATCH 00/13] Enable DMA engine for mmp2 and mmp3   zhaoy
• [PATCH 01/13] DMA:define second level irq definition   zhaoy
• [PATCH 02/13] dmaengine:open dmac and tdma support   zhaoy
• [PATCH 03/13] dmaengine: mmp: add two-channel dma driver   zhaoy
• [PATCH 04/13] dmaengine:mmp add peripheral dma driver   zhaoy
• [PATCH 05/13] mmp2:register dma devices for mmp2 platform   zhaoy
• [PATCH 06/13] mmp3:register dma devices for mmp3 platform   zhaoy
• [PATCH 07/13] DMA:mmp:remove redundant dma drivers   zhaoy
• [PATCH 08/13] DMAC:tty serial pxa use generic dma engine APIs   zhaoy
• [PATCH 09/13] DMA:remove unnecessary dma configurations   zhaoy
• [PATCH 10/13] dmaengine:audio:mmp audio use generic dma engine APIs   zhaoy
• [PATCH 11/13] DMA:update defconfig for mmp3   zhaoy
• [PATCH 12/13] mdma:dmaengine:update mdma for tdma   zhaoy
• [PATCH 13/13] DMA:update defconfig for mmp2   zhaoy
• 标准工时在工人薪酬设计中的应用I   戴奕群
• Question: how to make one page readonly on ARM   晁永生
• Question: how to make one page readonly on ARM   晁永生
• Question: how to make one page readonly on ARM   晁永生
• HX协调员工关系以及防范劳动争议的技9巧   李小雄
• [PATCH] serial: samsung: Add support 4M baudrate for samsung serial   김경일
• [PATCH 1/2] ARM: EXYNOS5: To use common config for EXYNOS4 and EXYNOS5 SPI   김경일
• [PATCH 2/2] ARM: EXYNOS5: Add support SPI for EXYNOS5250   김경일