[PATCH 1/2] ARM: EXYNOS: Add files about definition of C2C
Sylwester Nawrocki
snjw23 at gmail.com
Sat Feb 4 08:11:13 EST 2012
Hi,
On 02/04/2012 09:13 AM, Kisang Lee wrote:
> Cc: Arnd Bergmann<arnd<at> arndb.de>
> Cc: Greg Kroah-Hartman<greg<at> kroah.com>
>
> Following files are added for C2C driver
> c2c.h : Definition of C2C platform data and mode
> regs-c2c.h : Definition of C2C registers
>
> Signed-off-by: Kisang Lee<kisang80.lee at samsung.com>
> ---
> arch/arm/mach-exynos/include/mach/c2c.h | 65 +++++++++++++++++++++++
> arch/arm/mach-exynos/include/mach/regs-c2c.h | 71 ++++++++++++++++++++++++++
> 2 files changed, 136 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-exynos/include/mach/c2c.h
> create mode 100644 arch/arm/mach-exynos/include/mach/regs-c2c.h
>
...
> diff --git a/arch/arm/mach-exynos/include/mach/regs-c2c.h b/arch/arm/mach-exynos/include/mach/regs-c2c.h
> new file mode 100644
> index 0000000..0c3d005
> --- /dev/null
> +++ b/arch/arm/mach-exynos/include/mach/regs-c2c.h
> @@ -0,0 +1,71 @@
> +/* linux/arch/arm/mach-exynos/include/mach/regs-c2c.h
> + *
> + * Copyright (c) 2011 Samsung Electronics Co., Ltd.
2012 ?
> + * http://www.samsung.com/
> + *
> + * Register definition file for Samsung C2C
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#ifndef __ASM_ARM_REGS_S5P_C2C_H
> +#define __ASM_ARM_REGS_S5P_C2C_H
> +
> +/***************************************************************/
> +/* C2C Registers part */
> +/***************************************************************/
> +#define EXYNOS_C2C_REVISION 0x0
> +#define EXYNOS_C2C_SYSCONFIG 0x4
> +#define EXYNOS_C2C_SYSSTATUS 0x8
> +#define EXYNOS_C2C_PORTCONFIG 0xc
> +#define EXYNOS_C2C_MIRRORMODE 0x10
> +#define EXYNOS_C2C_IRQ_RAW_STAT0 0x14
> +#define EXYNOS_C2C_IRQ_RAW_STAT1 0x18
> +#define EXYNOS_C2C_IRQ_EN_STAT0 0x1c
> +#define EXYNOS_C2C_IRQ_EN_STAT1 0x20
> +#define EXYNOS_C2C_IRQ_EN_SET0 0x24
> +#define EXYNOS_C2C_IRQ_EN_SET1 0x28
> +#define EXYNOS_C2C_IRQ_EN_CLEAR0 0x2c
> +#define EXYNOS_C2C_IRQ_EN_CLEAR1 0x30
> +#define EXYNOS_C2C_IRQ_EOI 0x34
> +
> +#define EXYNOS_C2C_FCLK_FREQ 0x40
> +#define EXYNOS_C2C_RX_MAX_FREQ 0x44
> +#define EXYNOS_C2C_TX_MAX_FREQ 0x48
> +#define EXYNOS_C2C_RX_MAX_FREQ_ACK 0x4c
> +#define EXYNOS_C2C_WAKE_REQ 0x50
> +#define EXYNOS_C2C_WAKE_ACK 0x54
> +#define EXYNOS_C2C_STANDBY 0x60
> +#define EXYNOS_C2C_STANDBY_IN 0x64
> +#define EXYNOS_C2C_WAIT 0x68
> +#define EXYNOS_C2C_GENI_CONTROL 0x70
> +#define EXYNOS_C2C_GENI_MASK 0x74
> +#define EXYNOS_C2C_GENO_STATUS 0x80
> +
> +#define EXYNOS_C2C_GENO_INT 0x84
> +#define EXYNOS_C2C_GENO_LEVEL 0x88
> +
> +/***************************************************************/
> +/* C2C Bit definition part */
> +/***************************************************************/
> +/* SYSREG Bit definition */
> +#define C2C_SYSREG_CG (31) /* C2C Clock Gating [31] */
> +#define C2C_SYSREG_MO (30) /* Master On [30] */
> +#define C2C_SYSREG_FCLK (20) /* Default Functional Clock Freq [29:20] */
> +#define C2C_SYSREG_TXW (18) /* Default Tx Width [19:18] */
> +#define C2C_SYSREG_RXW (16) /* Default Rx Width [17:16] */
> +#define C2C_SYSREG_RST (15) /* Reset [15] */
> +#define C2C_SYSREG_MD (14) /* Master On [14] */
> +#define C2C_SYSREG_RTRST (13) /* Reset retention registers [13] */
> +#define C2C_SYSREG_BASE_ADDR (3) /* DRAM Base Address [12:3] */
> +#define C2C_SYSREG_DRAM_SIZE (0) /* DRAM Size [2:0] */
> +
> +#define C2C_GENIO_LATENCY_INT (26)
> +#define C2C_GENIO_OPP_INT (27)
> +#define C2C_GENIO_OPP_MODE0 (28)
> +#define C2C_GENIO_OPP_MODE1 (29)
> +#define C2C_GENIO_LATENCY0 (30)
> +#define C2C_GENIO_LATENCY1 (31)
Could we have the parentheses around numbers removed ? They don't seem
to be useful for anything.
> +#endif /* __ASM_ARM_REGS_S5P_C2C_H */
--
Thanks,
Sylwester
More information about the linux-arm-kernel
mailing list