[GIT PULL] cs89x0 platform support
Sascha Hauer
s.hauer at pengutronix.de
Thu Feb 9 02:40:40 EST 2012
On Wed, Feb 08, 2012 at 04:57:39PM -0800, Olof Johansson wrote:
> On Wed, Feb 1, 2012 at 7:54 AM, Sascha Hauer <s.hauer at pengutronix.de> wrote:
> > On Wed, Feb 01, 2012 at 11:09:13PM +0800, Shawn Guo wrote:
> >> On Wed, Feb 01, 2012 at 02:44:15PM +0100, Sascha Hauer wrote:
> >> > Hi Olof,
> >> >
> >> > Please pull the following for next. It contains cs89x0 platform
> >> > support. David has acked the base patch and is fine with this
> >> > patch going via the Arm tree.
> >> >
> >> > Sascha
> >> >
> >> > The following changes since commit dcd6c92267155e70a94b3927bce681ce74b80d1f:
> >> >
> >> > Linux 3.3-rc1 (2012-01-19 15:04:48 -0800)
> >> >
> >> > are available in the git repository at:
> >> > git://git.pengutronix.de/git/imx/linux-2.6.git features/cs89x0
> >> >
> >> > Jaccon Bastiaansen (4):
> >> > CS89x0 : add platform driver support
> >> > CS89x0 : add CS89x0 platform device to the iMX21ADS board
> >> > CS89x0 : remove QQ2440 board support from the CS89x0 driver
> >> > CS89x0 : add CS89x0 platform device to the iMX31ADS board
> >> >
> >> > arch/arm/configs/imx_v4_v5_defconfig | 2 +
> >> > arch/arm/configs/mx3_defconfig | 2 +
> >>
> >> The mx3_defconfig has been deleted from mainline. We may need to
> >> rebase the series to 3.3-rc2. Otherwise, we will eventually have
> >> conflict?
> >
> > Oops, yes. Just did that.
> >
> > Sascha
> >
> > The following changes since commit 62aa2b537c6f5957afd98e29f96897419ed5ebab:
> >
> > Linux 3.3-rc2 (2012-01-31 13:31:54 -0800)
> >
> > are available in the git repository at:
> > git://git.pengutronix.de/git/imx/linux-2.6.git features/cs89x0
>
> Hi,
>
> Arnd had some outstanding comments on the ethernet driver, so I will
> hold off pulling until that is resolved.
I think what Arnd made is some suggestions to further clean up the
driver, I don't think that the current patches should depend on doing
more work. This series is a nice cleanup and a solution for a five year
old problem. For the first time we can enable the cs89x0 driver in the
defconfig and thus make ethernet work on some boards.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the linux-arm-kernel
mailing list