[PATCH 3/5 v2] ARM: at91: usb_a9g20 add DT i2c support

[Jean-Christophe PLAGNIOL-VILLARD]

Use i2c-gpio and enable rv3029 RTC.

Enable the rtc in the sam9g20 defconfig.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
Cc: devicetree-discuss at lists.ozlabs.org
---
 arch/arm/boot/dts/usb_a9g20.dts        |    9 +++++++++
 arch/arm/configs/at91sam9g20_defconfig |    3 +++
 2 files changed, 12 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts
index 6c67987..3e8de5d 100644
--- a/arch/arm/boot/dts/usb_a9g20.dts
+++ b/arch/arm/boot/dts/usb_a9g20.dts
@@ -97,6 +97,15 @@
 				};
 
 			};
+
+			i2c-gpio at 0 {
+				status = "okay";
+
+				rv3029c2 at 56 {
+					compatible = "rv3029c2";
+					reg = <0x56>;
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig
index 9123568..994d331 100644
--- a/arch/arm/configs/at91sam9g20_defconfig
+++ b/arch/arm/configs/at91sam9g20_defconfig
@@ -74,6 +74,8 @@ CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
 CONFIG_SPI_SPIDEV=y
@@ -105,6 +107,7 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RV3029C2=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
 CONFIG_MSDOS_FS=y
-- 
1.7.7