[PATCH v2] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators

Hiremath, Vaibhav hvaibhav at ti.com
Thu Feb 23 07:08:34 EST 2012


On Wed, Feb 22, 2012 at 22:15:03, Porter, Matt wrote:
> This fixes smsc911x support on platforms using gpmc_smsc911x_init().
> 
> Commit c7e963f6888816 (net/smsc911x: Add regulator support) added
> the requirement that platforms provide vdd33a and vddvario supplies.
> 
> Signed-off-by: Matt Porter <mporter at ti.com>
> ---
> Changes for v2:
>    - temporary fix to avoid platform device id conflicts
>    - add commit summary from the smsc911x regulator support commit
>    - incorporate platform device registration error cause reporting 
> 
>  arch/arm/mach-omap2/gpmc-smsc911x.c |   54 ++++++++++++++++++++++++++++++++++-
>  1 files changed, 53 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
> index 9970331..a7388ed 100644
> --- a/arch/arm/mach-omap2/gpmc-smsc911x.c
> +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
> @@ -19,6 +19,8 @@
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
>  #include <linux/smsc911x.h>
> +#include <linux/regulator/fixed.h>
> +#include <linux/regulator/machine.h>
>  
>  #include <plat/board.h>
>  #include <plat/gpmc.h>
> @@ -42,6 +44,50 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = {
>  	.flags		= SMSC911X_USE_16BIT,
>  };
>  
> +static struct regulator_consumer_supply gpmc_smsc911x_supply[] = {
> +	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
> +	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
> +};
> +
> +/* Generic regulator definition to satisfy smsc911x */
> +static struct regulator_init_data gpmc_smsc911x_reg_init_data = {
> +	.constraints = {
> +		.min_uV			= 3300000,
> +		.max_uV			= 3300000,
> +		.valid_modes_mask	= REGULATOR_MODE_NORMAL
> +					| REGULATOR_MODE_STANDBY,
> +		.valid_ops_mask		= REGULATOR_CHANGE_MODE
> +					| REGULATOR_CHANGE_STATUS,
> +	},
> +	.num_consumer_supplies	= ARRAY_SIZE(gpmc_smsc911x_supply),
> +	.consumer_supplies	= gpmc_smsc911x_supply,
> +};
> +
> +static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = {
> +	.supply_name		= "gpmc_smsc911x",
> +	.microvolts		= 3300000,
> +	.gpio			= -EINVAL,
> +	.startup_delay		= 0,
> +	.enable_high		= 0,
> +	.enabled_at_boot	= 1,
> +	.init_data		= &gpmc_smsc911x_reg_init_data,
> +};
> +
> +/*
> + * Platform device id of 42 is a temporary fix to avoid conflicts
> + * with other reg-fixed-voltage devices. The real fix should
> + * involve the driver core providing a way of dynamically
> + * assigning a unique id on registration for platform devices
> + * in the same name space.
> + */
> +static struct platform_device gpmc_smsc911x_regulator = {
> +	.name		= "reg-fixed-voltage",
> +	.id		= 42,
> +	.dev = {
> +		.platform_data	= &gpmc_smsc911x_fixed_reg_data,
> +	},
> +};
> +
>  /*
>   * Initialize smsc911x device connected to the GPMC. Note that we
>   * assume that pin multiplexing is done in the board-*.c file,
> @@ -51,10 +97,16 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
>  {
>  	struct platform_device *pdev;
>  	unsigned long cs_mem_base;
> -	int ret;
> +	int ret, err;
>  

Do you really need another variable here? Can't you use "ret" here?

Thanks,
Vaibhav

>  	gpmc_cfg = board_data;
>  
> +	err = platform_device_register(&gpmc_smsc911x_regulator);
> +	if (err < 0) {
> +		pr_err("Unable to register smsc911x regulators: %d\n", err);
> +		return;
> +	}
> +
>  	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
>  		pr_err("Failed to request GPMC mem region\n");
>  		return;
> -- 
> 1.7.5.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 




More information about the linux-arm-kernel mailing list