[PATCH 5/8] ARM: OMAP1: Move most of plat/io.h into local iomap.h
Tony Lindgren
tony at atomide.com
Tue Feb 21 18:40:44 EST 2012
There's no need to have these in plat/io.h.
While at it, clean up the includes to group them
like they typically are grouped.
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
arch/arm/mach-omap1/ams-delta-fiq-handler.S | 3 ++-
arch/arm/mach-omap1/ams-delta-fiq.c | 1 +
arch/arm/mach-omap1/board-ams-delta.c | 10 ++++++----
arch/arm/mach-omap1/board-fsample.c | 7 +++++--
arch/arm/mach-omap1/board-h2.c | 6 +++---
arch/arm/mach-omap1/board-h3.c | 8 ++++----
arch/arm/mach-omap1/board-htcherald.c | 5 ++---
arch/arm/mach-omap1/board-innovator.c | 7 +++++--
arch/arm/mach-omap1/board-nokia770.c | 6 ++++--
arch/arm/mach-omap1/board-osk.c | 7 +++----
arch/arm/mach-omap1/board-palmte.c | 4 +++-
arch/arm/mach-omap1/board-palmtt.c | 9 +++++----
arch/arm/mach-omap1/board-palmz71.c | 9 +++++----
arch/arm/mach-omap1/board-perseus2.c | 7 +++++--
arch/arm/mach-omap1/board-sx1.c | 6 ++++--
arch/arm/mach-omap1/board-voiceblue.c | 6 ++++--
arch/arm/mach-omap1/clock.c | 2 +-
arch/arm/mach-omap1/clock_data.c | 2 +-
arch/arm/mach-omap1/devices.c | 8 ++++----
arch/arm/mach-omap1/dma.c | 2 +-
arch/arm/mach-omap1/flash.c | 2 +-
arch/arm/mach-omap1/fpga.c | 5 ++++-
arch/arm/mach-omap1/id.c | 1 +
arch/arm/mach-omap1/include/mach/entry-macro.S | 4 +++-
arch/arm/mach-omap1/io.c | 3 +++
arch/arm/mach-omap1/iomap.h | 18 ++++++++++++++++++
arch/arm/mach-omap1/irq.c | 4 +++-
arch/arm/mach-omap1/lcd_dma.c | 3 ++-
arch/arm/mach-omap1/mcbsp.c | 5 ++++-
arch/arm/mach-omap1/pm.c | 6 ++++--
arch/arm/mach-omap1/reset.c | 3 ++-
arch/arm/mach-omap1/sleep.S | 4 ++++
arch/arm/mach-omap1/sram.S | 4 ++++
arch/arm/mach-omap1/time.c | 3 ++-
arch/arm/mach-omap1/timer32k.c | 7 +++++--
arch/arm/plat-omap/include/plat/io.h | 13 -------------
36 files changed, 128 insertions(+), 72 deletions(-)
create mode 100644 arch/arm/mach-omap1/iomap.h
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index c1c5fb6..399c4c4 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -15,11 +15,12 @@
#include <linux/linkage.h>
-#include <plat/io.h>
#include <plat/board-ams-delta.h>
#include <mach/ams-delta-fiq.h>
+#include "iomap.h"
+
/*
* GPIO related definitions, copied from arch/arm/plat-omap/gpio.c.
* Unfortunately, those were not placed in a separate header file.
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
index 152b32c..fcce7ff 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.c
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -22,6 +22,7 @@
#include <plat/board-ams-delta.h>
#include <asm/fiq.h>
+
#include <mach/ams-delta-fiq.h>
static struct fiq_handler fh = {
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 88909cc..ac65d7d 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -20,25 +20,27 @@
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/export.h>
+#include <linux/io.h>
#include <media/soc_camera.h>
#include <asm/serial.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/io.h>
#include <plat/board-ams-delta.h>
#include <plat/keypad.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
-#include "common.h"
-#include <mach/camera.h>
+#include <mach/hardware.h>
#include <mach/ams-delta-fiq.h>
+#include <mach/camera.h>
+
+#include "iomap.h"
+#include "common.h"
static u8 ams_delta_latch1_reg;
static u16 ams_delta_latch2_reg;
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 0b9464b..079292c 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -22,7 +22,6 @@
#include <linux/input.h>
#include <linux/smc91x.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -32,9 +31,13 @@
#include <plat/flash.h>
#include <plat/fpga.h>
#include <plat/keypad.h>
-#include "common.h"
#include <plat/board.h>
+#include <mach/hardware.h>
+
+#include "iomap.h"
+#include "common.h"
+
/* fsample is pretty close to p2-sample */
#define fsample_cpld_read(reg) __raw_readb(reg)
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 00ad6b2..03e0050 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -31,8 +31,6 @@
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
-#include <mach/hardware.h>
-
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -43,9 +41,11 @@
#include <plat/irda.h>
#include <plat/usb.h>
#include <plat/keypad.h>
-#include "common.h"
#include <plat/flash.h>
+#include <mach/hardware.h>
+
+#include "common.h"
#include "board-h2.h"
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 4a7f251..f304fe2 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -33,21 +33,21 @@
#include <asm/setup.h>
#include <asm/page.h>
-#include <mach/hardware.h>
-
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/irqs.h>
#include <plat/mux.h>
#include <plat/tc.h>
#include <plat/usb.h>
#include <plat/keypad.h>
#include <plat/dma.h>
-#include "common.h"
#include <plat/flash.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+#include "common.h"
#include "board-h3.h"
/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 731cc3d..fa52d14 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -27,7 +27,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
-#include <linux/io.h>
+#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/i2c.h>
@@ -41,7 +41,6 @@
#include <asm/mach/arch.h>
#include <plat/omap7xx.h>
-#include "common.h"
#include <plat/board.h>
#include <plat/keypad.h>
#include <plat/usb.h>
@@ -49,7 +48,7 @@
#include <mach/irqs.h>
-#include <linux/delay.h>
+#include "common.h"
/* LCD register definition */
#define OMAP_LCDC_CONTROL (0xfffec000 + 0x00)
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 309369e..289a6b8 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -26,7 +26,6 @@
#include <linux/input.h>
#include <linux/smc91x.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -37,9 +36,13 @@
#include <plat/tc.h>
#include <plat/usb.h>
#include <plat/keypad.h>
-#include "common.h"
#include <plat/mmc.h>
+#include <mach/hardware.h>
+
+#include "iomap.h"
+#include "common.h"
+
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define INNOVATOR1610_ETHR_START 0x04000300
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index f9efc03..abdbdb0 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -21,7 +21,6 @@
#include <linux/workqueue.h>
#include <linux/delay.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -30,12 +29,15 @@
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/keypad.h>
-#include "common.h"
#include <plat/hwa742.h>
#include <plat/lcd_mipid.h>
#include <plat/mmc.h>
#include <plat/clock.h>
+#include <mach/hardware.h>
+
+#include "common.h"
+
#define ADS7846_PENDOWN_GPIO 15
static const unsigned int nokia770_keymap[] = {
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 675de06..e2d7ae4 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -34,15 +34,11 @@
#include <linux/i2c.h>
#include <linux/leds.h>
#include <linux/smc91x.h>
-
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
-
#include <linux/i2c/tps65010.h>
-#include <mach/hardware.h>
-
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -51,6 +47,9 @@
#include <plat/usb.h>
#include <plat/mux.h>
#include <plat/tc.h>
+
+#include <mach/hardware.h>
+
#include "common.h"
/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 81fa27f..04efa7e 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -28,7 +28,6 @@
#include <linux/interrupt.h>
#include <linux/apm-emulation.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -41,6 +40,9 @@
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
+
+#include <mach/hardware.h>
+
#include "common.h"
#define PALMTE_USBDETECT_GPIO 0
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 81cb821..acd1f36 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -24,8 +24,9 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/leds.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -39,10 +40,10 @@
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
-#include "common.h"
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
+#include <mach/hardware.h>
+
+#include "common.h"
#define PALMTT_USBDETECT_GPIO 0
#define PALMTT_CABLE_GPIO 1
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index e881945..c1cd0f2 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -27,8 +27,9 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -41,10 +42,10 @@
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
-#include "common.h"
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
+#include <mach/hardware.h>
+
+#include "common.h"
#define PALMZ71_USBDETECT_GPIO 0
#define PALMZ71_PENIRQ_GPIO 6
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index c000bed..83f5b76 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -22,7 +22,6 @@
#include <linux/input.h>
#include <linux/smc91x.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -32,9 +31,13 @@
#include <plat/fpga.h>
#include <plat/flash.h>
#include <plat/keypad.h>
-#include "common.h"
#include <plat/board.h>
+#include <mach/hardware.h>
+
+#include "iomap.h"
+#include "common.h"
+
static const unsigned int p2_keymap[] = {
KEY(0, 0, KEY_UP),
KEY(1, 0, KEY_RIGHT),
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 7bcd82a..fed4435 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -28,7 +28,6 @@
#include <linux/errno.h>
#include <linux/export.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -40,10 +39,13 @@
#include <plat/usb.h>
#include <plat/tc.h>
#include <plat/board.h>
-#include "common.h"
#include <plat/keypad.h>
#include <plat/board-sx1.h>
+#include <mach/hardware.h>
+
+#include "common.h"
+
/* Write to I2C device */
int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
{
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index f83a502..659d0f7 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -27,18 +27,20 @@
#include <linux/smc91x.h>
#include <linux/export.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/board-voiceblue.h>
-#include "common.h"
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/tc.h>
#include <plat/usb.h>
+#include <mach/hardware.h>
+
+#include "common.h"
+
static struct plat_serial8250_port voiceblue_ports[] = {
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 0c50df0..0e8c176 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -16,7 +16,6 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/clk.h>
-#include <linux/io.h>
#include <linux/clkdev.h>
#include <asm/mach-types.h>
@@ -27,6 +26,7 @@
#include <plat/sram.h>
#include <plat/clkdev_omap.h>
+#include "iomap.h"
#include "clock.h"
#include "opp.h"
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 94699a8..10b7451 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -18,7 +18,6 @@
#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <linux/delay.h>
-#include <linux/io.h>
#include <asm/mach-types.h> /* for machine_is_* */
@@ -28,6 +27,7 @@
#include <plat/sram.h> /* for omap_sram_reprogram_clock() */
#include <plat/usb.h> /* for OTG_BASE */
+#include "iomap.h"
#include "clock.h"
/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 1d76a63..d06c714 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -15,14 +15,10 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/io.h>
#include <linux/spi/spi.h>
-#include <mach/camera.h>
-#include <mach/hardware.h>
#include <asm/mach/map.h>
-#include "common.h"
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mux.h>
@@ -30,6 +26,10 @@
#include <plat/omap7xx.h>
#include <plat/mcbsp.h>
+#include <mach/camera.h>
+#include <mach/hardware.h>
+
+#include "common.h"
#include "clock.h"
/*-------------------------------------------------------------------------*/
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index f5a5220..3ef7d52 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -19,11 +19,11 @@
*/
#include <linux/err.h>
-#include <linux/io.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/io.h>
#include <plat/dma.h>
#include <plat/tc.h>
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
index 1749cb3..98d29a0 100644
--- a/arch/arm/mach-omap1/flash.c
+++ b/arch/arm/mach-omap1/flash.c
@@ -6,10 +6,10 @@
* published by the Free Software Foundation.
*/
+#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
-#include <plat/io.h>
#include <plat/tc.h>
#include <plat/flash.h>
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 0a17a1a..76c67b3 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -24,12 +24,15 @@
#include <linux/errno.h>
#include <linux/io.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <plat/fpga.h>
+#include <mach/hardware.h>
+
+#include "iomap.h"
+
static void fpga_mask_irq(struct irq_data *d)
{
unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE;
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index a0e3560..7483db2 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
+
#include <plat/cpu.h>
#define OMAP_DIE_ID_0 0xfffe1800
diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S
index bfb4fb1..68d2679 100644
--- a/arch/arm/mach-omap1/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap1/include/mach/entry-macro.S
@@ -9,10 +9,12 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
+
#include <mach/hardware.h>
#include <mach/io.h>
#include <mach/irqs.h>
-#include <asm/hardware/gic.h>
+
+#include "../../iomap.h"
.macro disable_fiq
.endm
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 8e55b6f..56fb444 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -15,9 +15,12 @@
#include <asm/tlb.h>
#include <asm/mach/map.h>
+
#include <plat/mux.h>
#include <plat/tc.h>
+#include "iomap.h"
+#include "common.h"
#include "clock.h"
extern void omap_check_revision(void);
diff --git a/arch/arm/mach-omap1/iomap.h b/arch/arm/mach-omap1/iomap.h
new file mode 100644
index 0000000..c2cdf71
--- /dev/null
+++ b/arch/arm/mach-omap1/iomap.h
@@ -0,0 +1,18 @@
+#ifdef __ASSEMBLER__
+#define IOMEM(x) (x)
+#else
+#define IOMEM(x) ((void __force __iomem *)(x))
+#endif
+
+#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
+#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Omap1 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+
+#define OMAP1_IO_PHYS 0xFFFB0000
+#define OMAP1_IO_SIZE 0x40000
+#define OMAP1_IO_VIRT (OMAP1_IO_PHYS - OMAP1_IO_OFFSET)
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index e5b104b..4448114 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -42,11 +42,13 @@
#include <linux/interrupt.h>
#include <linux/io.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
+
#include <plat/cpu.h>
+#include <mach/hardware.h>
+
#define IRQ_BANK(irq) ((irq) >> 5)
#define IRQ_BIT(irq) ((irq) & 0x1f)
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
index 4538093..123a0df 100644
--- a/arch/arm/mach-omap1/lcd_dma.c
+++ b/arch/arm/mach-omap1/lcd_dma.c
@@ -27,9 +27,10 @@
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <plat/dma.h>
+
#include <mach/hardware.h>
#include <mach/lcdc.h>
-#include <plat/dma.h>
int omap_lcd_dma_running(void)
{
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 91f9abb..3082d60 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -19,12 +19,15 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <mach/irqs.h>
#include <plat/dma.h>
#include <plat/mux.h>
#include <plat/cpu.h>
#include <plat/mcbsp.h>
+#include <mach/irqs.h>
+
+#include "iomap.h"
+
#define DPS_RSTCT2_PER_EN (1 << 0)
#define DSP_RSTCT2_WD_PER_EN (1 << 1)
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 89ea20c..c06bb40 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -42,14 +42,13 @@
#include <linux/sysfs.h>
#include <linux/module.h>
#include <linux/io.h>
+#include <linux/atomic.h>
#include <asm/irq.h>
-#include <linux/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <plat/cpu.h>
-#include <mach/irqs.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/tc.h>
@@ -57,6 +56,9 @@
#include <plat/dma.h>
#include <plat/dmtimer.h>
+#include <mach/irqs.h>
+
+#include "iomap.h"
#include "pm.h"
static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c
index 91d199b..f255b15 100644
--- a/arch/arm/mach-omap1/reset.c
+++ b/arch/arm/mach-omap1/reset.c
@@ -4,9 +4,10 @@
#include <linux/kernel.h>
#include <linux/io.h>
-#include <mach/hardware.h>
#include <plat/prcm.h>
+#include <mach/hardware.h>
+
void omap1_restart(char mode, const char *cmd)
{
/*
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index c875bdc..0779db1 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -33,8 +33,12 @@
*/
#include <linux/linkage.h>
+
#include <asm/assembler.h>
+
#include <mach/io.h>
+
+#include "iomap.h"
#include "pm.h"
.text
diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S
index 692587d..2ce0b9a 100644
--- a/arch/arm/mach-omap1/sram.S
+++ b/arch/arm/mach-omap1/sram.S
@@ -9,10 +9,14 @@
*/
#include <linux/linkage.h>
+
#include <asm/assembler.h>
+
#include <mach/io.h>
#include <mach/hardware.h>
+#include "iomap.h"
+
.text
/*
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index b8faffa..2fae6a2 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -45,14 +45,15 @@
#include <linux/io.h>
#include <asm/system.h>
-#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/sched_clock.h>
+#include <mach/hardware.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
+#include "iomap.h"
#include "common.h"
#ifdef CONFIG_OMAP_MPU_TIMER
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 9a54ef4..a2e6d07 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -47,14 +47,17 @@
#include <linux/io.h>
#include <asm/system.h>
-#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
-#include "common.h"
+
#include <plat/dmtimer.h>
+#include <mach/hardware.h>
+
+#include "common.h"
+
/*
* ---------------------------------------------------------------------------
* 32KHz OS timer
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
index 28cd796..e5e8e08 100644
--- a/arch/arm/plat-omap/include/plat/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -60,9 +60,6 @@
#define IOMEM(x) ((void __force __iomem *)(x))
#endif
-#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
-#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
-
#define OMAP2_L3_IO_OFFSET 0x90000000
#define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */
@@ -87,16 +84,6 @@
/*
* ----------------------------------------------------------------------------
- * Omap1 specific IO mapping
- * ----------------------------------------------------------------------------
- */
-
-#define OMAP1_IO_PHYS 0xFFFB0000
-#define OMAP1_IO_SIZE 0x40000
-#define OMAP1_IO_VIRT (OMAP1_IO_PHYS - OMAP1_IO_OFFSET)
-
-/*
- * ----------------------------------------------------------------------------
* Omap2 specific IO mapping
* ----------------------------------------------------------------------------
*/
More information about the linux-arm-kernel
mailing list