[PATCH 1/4] spi/omap: Add DT support to McSPI driver
Rob Herring
robherring2 at gmail.com
Wed Feb 15 14:34:46 EST 2012
On 02/15/2012 11:37 AM, Benoit Cousson wrote:
> Add device tree support to the OMAP2+ McSPI driver.
> Add the bindings documentation.
>
> Based on original code from Rajendra.
>
> Signed-off-by: Benoit Cousson <b-cousson at ti.com>
> Cc: Grant Likely <grant.likely at secretlab.ca>
> Cc: Rajendra Nayak <rnayak at ti.com>
> ---
> Documentation/devicetree/bindings/spi/omap-spi.txt | 20 +++++++
> drivers/spi/spi-omap2-mcspi.c | 56 +++++++++++++++++---
> 2 files changed, 68 insertions(+), 8 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/spi/omap-spi.txt
>
> diff --git a/Documentation/devicetree/bindings/spi/omap-spi.txt b/Documentation/devicetree/bindings/spi/omap-spi.txt
> new file mode 100644
> index 0000000..81df374
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/omap-spi.txt
> @@ -0,0 +1,20 @@
> +OMAP2+ McSPI device
> +
> +Required properties:
> +- compatible :
> + - "ti,omap2-spi" for OMAP2 & OMAP3.
> + - "ti,omap4-spi" for OMAP4+.
> +- ti,spi-num-cs : Number of chipselect supported by the instance.
> +- ti,hwmods: Name of the hwmod associated to the McSPI
> +
> +
> +Example:
> +
> +mcspi1: mcspi at 1 {
I don't recall if there's a generic name defined but just "spi" would
probably be better. Also, shouldn't this be the base address?
Otherwise, for the series:
Acked-by: Rob Herring <rob.herring at calxeda.com>
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "ti,omap4-mcspi";
> + ti,hwmods = "mcspi1";
> + ti,spi-num-cs = <4>;
> +};
> +
> diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
> index 0b0dfb7..bb9274c 100644
> --- a/drivers/spi/spi-omap2-mcspi.c
> +++ b/drivers/spi/spi-omap2-mcspi.c
> @@ -34,6 +34,8 @@
> #include <linux/io.h>
> #include <linux/slab.h>
> #include <linux/pm_runtime.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
>
> #include <linux/spi/spi.h>
>
> @@ -1079,15 +1081,39 @@ static int omap_mcspi_runtime_resume(struct device *dev)
> return 0;
> }
>
> +static struct omap2_mcspi_platform_config omap2_pdata = {
> + .regs_offset = 0,
> +};
> +
> +static struct omap2_mcspi_platform_config omap4_pdata = {
> + .regs_offset = OMAP4_MCSPI_REG_OFFSET,
> +};
> +
> +static const struct of_device_id omap_mcspi_of_match[] = {
> + {
> + .compatible = "ti,omap2-mcspi",
> + .data = &omap2_pdata,
> + },
> + {
> + .compatible = "ti,omap4-mcspi",
> + .data = &omap4_pdata,
> + },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, omap_mcspi_of_match);
>
> static int __init omap2_mcspi_probe(struct platform_device *pdev)
> {
> struct spi_master *master;
> - struct omap2_mcspi_platform_config *pdata = pdev->dev.platform_data;
> + struct omap2_mcspi_platform_config *pdata;
> struct omap2_mcspi *mcspi;
> struct resource *r;
> int status = 0, i;
> char wq_name[20];
> + u32 regs_offset = 0;
> + static int bus_num = 1;
> + struct device_node *node = pdev->dev.of_node;
> + const struct of_device_id *match;
>
> master = spi_alloc_master(&pdev->dev, sizeof *mcspi);
> if (master == NULL) {
> @@ -1098,13 +1124,26 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
> /* the spi->mode bits understood by this driver: */
> master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
>
> - if (pdev->id != -1)
> - master->bus_num = pdev->id;
> -
> master->setup = omap2_mcspi_setup;
> master->transfer = omap2_mcspi_transfer;
> master->cleanup = omap2_mcspi_cleanup;
> - master->num_chipselect = pdata->num_cs;
> + master->dev.of_node = node;
> +
> + match = of_match_device(omap_mcspi_of_match, &pdev->dev);
> + if (match) {
> + u32 num_cs = 1; /* default number of chipselect */
> + pdata = match->data;
> +
> + of_property_read_u32(node, "ti,spi-num-cs", &num_cs);
> + master->num_chipselect = num_cs;
> + master->bus_num = bus_num++;
> + } else {
> + pdata = pdev->dev.platform_data;
> + master->num_chipselect = pdata->num_cs;
> + if (pdev->id != -1)
> + master->bus_num = pdev->id;
> + }
> + regs_offset = pdata->regs_offset;
>
> dev_set_drvdata(&pdev->dev, master);
>
> @@ -1124,8 +1163,8 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
> goto free_master;
> }
>
> - r->start += pdata->regs_offset;
> - r->end += pdata->regs_offset;
> + r->start += regs_offset;
> + r->end += regs_offset;
> mcspi->phys = r->start;
> if (!request_mem_region(r->start, resource_size(r),
> dev_name(&pdev->dev))) {
> @@ -1285,7 +1324,8 @@ static struct platform_driver omap2_mcspi_driver = {
> .driver = {
> .name = "omap2_mcspi",
> .owner = THIS_MODULE,
> - .pm = &omap2_mcspi_pm_ops
> + .pm = &omap2_mcspi_pm_ops,
> + .of_match_table = omap_mcspi_of_match,
> },
> .remove = __exit_p(omap2_mcspi_remove),
> };
More information about the linux-arm-kernel
mailing list