[PATCH] pinctrl: spawn U300 pinctrl from the COH901 GPIO
Linus Walleij
linus.walleij at stericsson.com
Tue Feb 21 08:34:35 EST 2012
From: Linus Walleij <linus.walleij at linaro.org>
This solves the riddle on how the U300 pin controller shall be
able to reference the struct gpio_chip even though these are
two separate drivers: spawn the pinctrl child from the GPIO
driver and pass in the struct gpio_chip as platform data.
In the process we rename the U300 "pinmux-u300" to
"pinctrl-u300" so as not to confuse.
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
arch/arm/mach-u300/core.c | 30 +++++++++++++-------------
arch/arm/mach-u300/include/mach/gpio-u300.h | 2 +
drivers/pinctrl/pinctrl-coh901.c | 10 +++++++-
drivers/pinctrl/pinctrl-u300.c | 20 +++++++++++------
4 files changed, 38 insertions(+), 24 deletions(-)
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index bb1034f..030b2c0 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -1477,7 +1477,7 @@ static struct coh901318_platform coh901318_platform = {
.max_channels = U300_DMA_CHANNELS,
};
-static struct resource pinmux_resources[] = {
+static struct resource pinctrl_resources[] = {
{
.start = U300_SYSCON_BASE,
.end = U300_SYSCON_BASE + SZ_4K - 1,
@@ -1506,6 +1506,13 @@ static struct platform_device i2c1_device = {
.resource = i2c1_resources,
};
+static struct platform_device pinctrl_device = {
+ .name = "pinctrl-u300",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pinctrl_resources),
+ .resource = pinctrl_resources,
+};
+
/*
* The different variants have a few different versions of the
* GPIO block, with different number of ports.
@@ -1525,6 +1532,7 @@ static struct u300_gpio_platform u300_gpio_plat = {
#endif
.gpio_base = 0,
.gpio_irq_base = IRQ_U300_GPIO_BASE,
+ .pinctrl_device = &pinctrl_device,
};
static struct platform_device gpio_device = {
@@ -1597,23 +1605,16 @@ static struct platform_device dma_device = {
},
};
-static struct platform_device pinmux_device = {
- .name = "pinmux-u300",
- .id = -1,
- .num_resources = ARRAY_SIZE(pinmux_resources),
- .resource = pinmux_resources,
-};
-
/* Pinmux settings */
static struct pinctrl_map __initdata u300_pinmux_map[] = {
/* anonymous maps for chip power and EMIFs */
- PIN_MAP_SYS_HOG("POWER", "pinmux-u300", "power"),
- PIN_MAP_SYS_HOG("EMIF0", "pinmux-u300", "emif0"),
- PIN_MAP_SYS_HOG("EMIF1", "pinmux-u300", "emif1"),
+ PIN_MAP_SYS_HOG("POWER", "pinctrl-u300", "power"),
+ PIN_MAP_SYS_HOG("EMIF0", "pinctrl-u300", "emif0"),
+ PIN_MAP_SYS_HOG("EMIF1", "pinctrl-u300", "emif1"),
/* per-device maps for MMC/SD, SPI and UART */
- PIN_MAP("MMCSD", "pinmux-u300", "mmc0", "mmci"),
- PIN_MAP("SPI", "pinmux-u300", "spi0", "pl022"),
- PIN_MAP("UART0", "pinmux-u300", "uart0", "uart0"),
+ PIN_MAP("MMCSD", "pinctrl-u300", "mmc0", "mmci"),
+ PIN_MAP("SPI", "pinctrl-u300", "spi0", "pl022"),
+ PIN_MAP("UART0", "pinctrl-u300", "uart0", "uart0"),
};
struct u300_mux_hog {
@@ -1676,7 +1677,6 @@ static struct platform_device *platform_devs[] __initdata = {
&gpio_device,
&nand_device,
&wdog_device,
- &pinmux_device,
};
/*
diff --git a/arch/arm/mach-u300/include/mach/gpio-u300.h b/arch/arm/mach-u300/include/mach/gpio-u300.h
index bf4c793..e81400c 100644
--- a/arch/arm/mach-u300/include/mach/gpio-u300.h
+++ b/arch/arm/mach-u300/include/mach/gpio-u300.h
@@ -24,12 +24,14 @@ enum u300_gpio_variant {
* @ports: number of GPIO block ports
* @gpio_base: first GPIO number for this block (use a free range)
* @gpio_irq_base: first GPIO IRQ number for this block (use a free range)
+ * @pinctrl_device: pin control device to spawn as child
*/
struct u300_gpio_platform {
enum u300_gpio_variant variant;
u8 ports;
int gpio_base;
int gpio_irq_base;
+ struct platform_device *pinctrl_device;
};
#endif /* __MACH_U300_GPIO_U300_H */
diff --git a/drivers/pinctrl/pinctrl-coh901.c b/drivers/pinctrl/pinctrl-coh901.c
index eba232a..b90c011 100644
--- a/drivers/pinctrl/pinctrl-coh901.c
+++ b/drivers/pinctrl/pinctrl-coh901.c
@@ -705,7 +705,6 @@ static inline void u300_gpio_free_ports(struct u300_gpio *gpio)
list_for_each_safe(p, n, &gpio->port_list) {
port = list_entry(p, struct u300_gpio_port, node);
list_del(&port->node);
- free_irq(port->irq, port);
kfree(port);
}
}
@@ -861,10 +860,18 @@ static int __init u300_gpio_probe(struct platform_device *pdev)
goto err_no_chip;
}
+ /* Spawn pin controller device as child of the GPIO, pass gpio chip */
+ plat->pinctrl_device->dev.platform_data = &gpio->chip;
+ err = platform_device_register(plat->pinctrl_device);
+ if (err)
+ goto err_no_pinctrl;
+
platform_set_drvdata(pdev, gpio);
return 0;
+err_no_pinctrl:
+ err = gpiochip_remove(&gpio->chip);
err_no_chip:
err_no_port:
u300_gpio_free_ports(gpio);
@@ -919,7 +926,6 @@ static struct platform_driver u300_gpio_driver = {
.remove = __exit_p(u300_gpio_remove),
};
-
static int __init u300_gpio_init(void)
{
return platform_driver_probe(&u300_gpio_driver, u300_gpio_probe);
diff --git a/drivers/pinctrl/pinctrl-u300.c b/drivers/pinctrl/pinctrl-u300.c
index c8d02f1..fc4a281 100644
--- a/drivers/pinctrl/pinctrl-u300.c
+++ b/drivers/pinctrl/pinctrl-u300.c
@@ -162,7 +162,7 @@
#define U300_SYSCON_PMC4R_APP_MISC_16_APP_UART1_CTS 0x0100
#define U300_SYSCON_PMC4R_APP_MISC_16_EMIF_1_STATIC_CS5_N 0x0200
-#define DRIVER_NAME "pinmux-u300"
+#define DRIVER_NAME "pinctrl-u300"
/*
* The DB3350 has 467 pads, I have enumerated the pads clockwise around the
@@ -1053,13 +1053,16 @@ static struct pinctrl_desc u300_pmx_desc = {
.owner = THIS_MODULE,
};
-static int __init u300_pmx_probe(struct platform_device *pdev)
+static int __devinit u300_pmx_probe(struct platform_device *pdev)
{
struct u300_pmx *upmx;
struct resource *res;
+ struct gpio_chip *gpio_chip = dev_get_platdata(&pdev->dev);
int ret;
int i;
+ pr_err("U300 PMX PROBE\n");
+
/* Create state holders etc for this driver */
upmx = devm_kzalloc(&pdev->dev, sizeof(*upmx), GFP_KERNEL);
if (!upmx)
@@ -1095,12 +1098,14 @@ static int __init u300_pmx_probe(struct platform_device *pdev)
}
/* We will handle a range of GPIO pins */
- for (i = 0; i < ARRAY_SIZE(u300_gpio_ranges); i++)
+ for (i = 0; i < ARRAY_SIZE(u300_gpio_ranges); i++) {
+ u300_gpio_ranges[i].gc = gpio_chip;
pinctrl_add_gpio_range(upmx->pctl, &u300_gpio_ranges[i]);
+ }
platform_set_drvdata(pdev, upmx);
- dev_info(&pdev->dev, "initialized U300 pinmux driver\n");
+ dev_info(&pdev->dev, "initialized U300 pin control driver\n");
return 0;
@@ -1115,7 +1120,7 @@ out_no_resource:
return ret;
}
-static int __exit u300_pmx_remove(struct platform_device *pdev)
+static int __devexit u300_pmx_remove(struct platform_device *pdev)
{
struct u300_pmx *upmx = platform_get_drvdata(pdev);
int i;
@@ -1136,12 +1141,13 @@ static struct platform_driver u300_pmx_driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
},
- .remove = __exit_p(u300_pmx_remove),
+ .probe = u300_pmx_probe,
+ .remove = __devexit_p(u300_pmx_remove),
};
static int __init u300_pmx_init(void)
{
- return platform_driver_probe(&u300_pmx_driver, u300_pmx_probe);
+ return platform_driver_register(&u300_pmx_driver);
}
arch_initcall(u300_pmx_init);
--
1.7.8
More information about the linux-arm-kernel
mailing list