[CPUFREQ] Fix exposure of ARM_EXYNOS4210_CPUFREQ

[Kukjin Kim]

Russell King - ARM Linux wrote:
> 
> On Thu, Feb 16, 2012 at 09:17:30PM +0900, Kukjin Kim wrote:
> > On 02/13/12 18:49, Russell King - ARM Linux wrote:
> >> From: Russell King<rmk+kernel at arm.linux.org.uk>
> >>
> >> exynos4210-cpufreq.c is not buildable on non-exynos builds, so it's
> >> pointless allowing this option to be exposed.  Fix this by adding a
> >> dependency on ARCH_EXYNOS.
> >>
> >> drivers/cpufreq/exynos4210-cpufreq.c:20:29: error: mach/regs-clock.h:
> No such file or directory
> >> drivers/cpufreq/exynos4210-cpufreq.c:21:26: error: mach/cpufreq.h: No
> such file or directory
> >>
> >> Signed-off-by: Russell King<rmk+kernel at arm.linux.org.uk>
> >> Cc: Dave Jones<davej at redhat.com>
> >> Cc: cpufreq at vger.kernel.org
> >> Cc: Kukjin Kim<kgene.kim at samsung.com>
> >> ---
> >>   drivers/cpufreq/Kconfig.arm |    1 +
> >>   1 files changed, 1 insertions(+), 0 deletions(-)
> >>
> >> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> >> index e0664fe..c8bde43 100644
> >> --- a/drivers/cpufreq/Kconfig.arm
> >> +++ b/drivers/cpufreq/Kconfig.arm
> >> @@ -34,6 +34,7 @@ config ARM_EXYNOS_CPUFREQ
> >>
> >>   config ARM_EXYNOS4210_CPUFREQ
> >>   	bool "Samsung EXYNOS4210"
> >> +	depends on ARCH_EXYNOS
> >>   	help
> >>   	  This adds the CPUFreq driver for Samsung EXYNOS4210
> >>   	  SoC (S5PV310 or S5PC210).
> >>
> >
> > Yes, you're right. Should be added it.
> > BTW, how about following?
> >
> > diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> > index e0664fe..a5e0487 100644
> > --- a/drivers/cpufreq/Kconfig.arm
> > +++ b/drivers/cpufreq/Kconfig.arm
> > @@ -33,7 +33,7 @@ config ARM_EXYNOS_CPUFREQ
> >           If in doubt, say N.
> >
> >  config ARM_EXYNOS4210_CPUFREQ
> > -       bool "Samsung EXYNOS4210"
> > +       bool
> >         help
> >           This adds the CPUFreq driver for Samsung EXYNOS4210
> >           SoC (S5PV310 or S5PC210).
> >
> > I think, when selecting "ARM_EXYNOS_CPUFREQ", "ARM_EXYNOS4210_CPUFREQ"
> > will be selected on EXYNOS4210 with above changes.
> 
Hi Russell,

> I don't think so.  If you select this symbol you'll get a complaint
> that CPU_FREQ is not selected.

Hmm..when I selected this symbol, I didn't get any warning about CPU_FREQ,
because the cpufreq/Kconfig.arm depends on CPU_FREQ. It means, when CPU_FREQ
is not selected, I can't select anything in cpufreq/Kconfig.arm.

> What's probably much better is:
> 
Yes, looks better than mine.

> config ARM_EXYNOS4210_CPUFREQ
> 	def_bool ARCH_EXYNOS

But, should be...
	def_bool CPU_EXYNOS4210

Because the ARM_EXYNOS4210_CPUFREQ is only for EXYNOS4210 and the
ARM_EXYNOS4X12_CPUFREQ will be added, actually submitted for other
SOC_EXYNOS4212 and SOC_EXYNOS4412.

> 
> because that ensures that if the CPU_FREQ dependencies change you don't
> have to update numerous places for that too.

OK, I agree.

So could you  please re-send/re-work this?

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.