[PATCH REPOST] pxa/hx4700: Add ASIC3 LED support

[Haojian Zhuang]

On Sun, Feb 26, 2012 at 6:55 PM, Philipp Zabel <philipp.zabel at gmail.com> wrote:
> Am Mittwoch, den 22.06.2011, 19:31 +0000 schrieb Paul Parsons:
>> Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform.
>>
>> Signed-off-by: Paul Parsons <lost.distance at yahoo.com>
>> ---
>>
>> This part of the HTC ASIC3 LED driver patch set was seemingly dropped, hence repost.
>>
>> --- clean-3.0-rc4/arch/arm/mach-pxa/hx4700.c  2011-06-21 04:25:46.000000000 +0100
>> +++ linux-3.0-rc4/arch/arm/mach-pxa/hx4700.c  2011-06-22 10:43:18.986382990 +0100
>> @@ -280,6 +280,21 @@ static u16 asic3_gpio_config[] = {
>>       ASIC3_GPIOD15_nPIOW,
>>  };
>>
>> +static struct asic3_led asic3_leds[ASIC3_NUM_LEDS] = {
>> +     [0] = {
>> +             .name = "hx4700:amber",
>> +             .default_trigger = "ds2760-battery.0-charging-blink-full-solid",
>> +     },
>> +     [1] = {
>> +             .name = "hx4700:green",
>> +             .default_trigger = "unused",
>> +     },
>> +     [2] = {
>> +             .name = "hx4700:blue",
>> +             .default_trigger = "hx4700-radio",
>> +     },
>> +};
>> +
>>  static struct resource asic3_resources[] = {
>>       /* GPIO part */
>>       [0] = {
>> @@ -310,6 +325,7 @@ static struct asic3_platform_data asic3_
>>       .gpio_config_num = ARRAY_SIZE(asic3_gpio_config),
>>       .irq_base        = IRQ_BOARD_START,
>>       .gpio_base       = HX4700_ASIC3_GPIO_BASE,
>> +     .leds            = asic3_leds,
>>  };
>>
>>  static struct platform_device asic3 = {
>>
>
> Acked-by: Philipp Zabel <philipp.zabel at gmail.com>
>
> regards
> Philipp
>
Applied.

Thanks
Haojian