[PATCH REPOST] pxa/hx4700: Add ASIC3 LED support

[Philipp Zabel]

Am Mittwoch, den 22.06.2011, 19:31 +0000 schrieb Paul Parsons:
> Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform.
> 
> Signed-off-by: Paul Parsons <lost.distance at yahoo.com>
> ---
> 
> This part of the HTC ASIC3 LED driver patch set was seemingly dropped, hence repost.
> 
> --- clean-3.0-rc4/arch/arm/mach-pxa/hx4700.c	2011-06-21 04:25:46.000000000 +0100
> +++ linux-3.0-rc4/arch/arm/mach-pxa/hx4700.c	2011-06-22 10:43:18.986382990 +0100
> @@ -280,6 +280,21 @@ static u16 asic3_gpio_config[] = {
>  	ASIC3_GPIOD15_nPIOW,
>  };
>  
> +static struct asic3_led asic3_leds[ASIC3_NUM_LEDS] = {
> +	[0] = {
> +		.name = "hx4700:amber",
> +		.default_trigger = "ds2760-battery.0-charging-blink-full-solid",
> +	},
> +	[1] = {
> +		.name = "hx4700:green",
> +		.default_trigger = "unused",
> +	},
> +	[2] = {
> +		.name = "hx4700:blue",
> +		.default_trigger = "hx4700-radio",
> +	},
> +};
> +
>  static struct resource asic3_resources[] = {
>  	/* GPIO part */
>  	[0] = {
> @@ -310,6 +325,7 @@ static struct asic3_platform_data asic3_
>  	.gpio_config_num = ARRAY_SIZE(asic3_gpio_config),
>  	.irq_base        = IRQ_BOARD_START,
>  	.gpio_base       = HX4700_ASIC3_GPIO_BASE,
> +	.leds            = asic3_leds,
>  };
>  
>  static struct platform_device asic3 = {
> 

Acked-by: Philipp Zabel <philipp.zabel at gmail.com>

regards
Philipp